Well, I'm a complete noob, though I have a rooted ICS, I never tried to flash a ROM 'till now, but I really wanted to see JellyBean running on my phone.
What I did:
> Saw this thread http://forum.xda-developers.com/showthread.php?t=1953847
> Downloaded the ROM
> I read the first step as "make sure you are on a (rooted ICS-ROM) or (JB-ROM with CWM recovery and brickfree kernel installed)" and not "make sure you are on a [(rooted ICS-ROM) or (JB-ROM with CWM recovery)] and brickfree kernel installed"
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe. Obviously, I didn't see the brickbug warnings which even a 5 year old with one eye :cyclops: would have seen.
> So, just to be safe I flashed abyssKernel 4.2 from ODIN via Download Mode (Volume Down + power + home)
> Now I have the yellow triangle and raised flash counter
> Finally I tried to flash Stock ICS ROM from Dr Ketan's guide http://forum.xda-developers.com/showthread.php?t=1424997
Now this is what I see in the Odin3 v1.85 message box:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLR9_N7000ODDLR3_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Help plz :| :crying:
clear this step
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe
you had just rooted ICS or root + safe kernel, I mean which kernel was there at the time you wiped.
another thing you didn't mentioned have you flash that ROM you have copied to SD or not
Your log still can't confirm brick, keep patience and reply to queries above
as well confirm your device was in download mode while flashing ROM with Odin as well ID com port was added in Odin (I can't see in log).
dr.ketan said:
clear this step
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe
you had just rooted ICS or root + safe kernel, I mean which kernel was there at the time you wiped.
another thing you didn't mentioned have you flash that ROM you have copied to SD or not
Your log still can't confirm brick, keep patience and reply to queries above
as well confirm your device was in download mode while flashing ROM with Odin as well ID com port was added in Odin (I can't see in log).
Click to expand...
Click to collapse
Actually, I'm not sure which kernel I had, I think I had either the default kernel or the AbyssKernel (I never used any other kernels)
I didn't flash the copied ROM
And yes, the device was in download mode while flashing stock ICS and ID:COM in odin turned yellow.
Do you remember how you had root ICS?
Anyway issue is not seems that, your device was not added
repeat procedure
Confirm you have installed Kies/Adb driver
Put device in download mode
connect device
ID com should turn yellow
select PDA for ROM file
Hit 'start' to flash
dr.ketan said:
Do you remember how you had root ICS?
Click to expand...
Click to collapse
I followed rootgalaxynote's guide for ICS
http () ://rootgalaxynote. () com/galaxy-note-root/how-to-root-ics-on-galaxy-note-gt-n7000-no-computer-required/
(Sorry I cant post links as I am a new user, so remove the brackets)
Anyway follow as said in my previous post
And yes, you were on which ROM ?(answer this before reflashing, if you were on DDLR9 just flashing kernel will be enough)
dr.ketan said:
Anyway follow as said in my previous post
And yes, you were on which ROM ?(answer this before reflashing, if you were on DDLR9 just flashing kernel will be enough)
Click to expand...
Click to collapse
Yes, I was in DDLR9
Also, I can't even get into download mode now, it says "Low battery! cant download!".
And it is plugged in to the computer for almost two hours now
switch off device and plugin to charger it may get charged. if you get into download mode do this
Ok then download this
http://www.mediafire.com/?b7yee04jkcf60g6
and flash with PC Odin (your counter already raise so nothing to worry about it)
you have to select this file for PDA tab, rest of instruction as few post above said
Otherwise manage for charged battery
dr.ketan said:
switch off device and plugin to charger it may get charged. if you get into download mode do this
Ok then download this
http://www.mediafire.com/?b7yee04jkcf60g6
and flash with PC Odin (your counter already raise so nothing to worry about it)
you have to select this file for PDA tab, rest of instruction as few post above said
Otherwise manage for charged battery
Click to expand...
Click to collapse
Currently its not going into download mode, willl try to get a charged battery and post the results as soon as I can. Thanks in advance.
Also, I get this
'charging_q1.jpg' draw failed
message.
No problem just try download mode working or can you start recovery mode
Sent from my GT-N7100 using xda premium
dr.ketan said:
No problem just try download mode working or can you start recovery mode
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Your a saint ,Dr...!
Sent from my GT-N7000 using Tapatalk 2
howard bamber said:
Your a saint ,Dr...!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
+1. DR. K, you are always there helping when some one in lost. I remember you said that you no longer own a G.NOTE, but instead a G.NOTE2, but you are so willing to help those whoever facing problem. You are a SAINT. big applause. thank you so much
Sent from my GT-N7000 using Tapatalk 2
I succesfully flashed PhilZ and then tried to flash the stock ICS ROM but it failed.
The Odin message box showed the following:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLR9_N7000ODDLR3_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> zImage
<ID:0/013> NAND Write Start!!
<ID:0/013> modem.bin
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
May be remove the battery for a few seconds, reinsert and go download mode again and fladh
nokiamodeln91 said:
May be remove the battery for a few seconds, reinsert and go download mode again and fladh
Click to expand...
Click to collapse
Tried, no result, still says low battery cant download :/
I think I should go to the service center then.
either charge the battery on a diff note or try a full charged battery
Samsung service centre had to replace my motherboard. Now it's alright.
Related
hi
My Note stop charging, stop working and can't use volume up + home + power buttons (every time restart)
My note not rooted and tried to install stock rom throw odin but every time failed.
after restarting it's give this message:
firmware upgrade encountered an issue. please select recovery mode in kies & try again.
Kies can't see my device.
I installed CWM recovery throw odin and the device restart with yellow triangle and not working.
any suggestion?
<ID:0/035> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000JPKJ4_N7000OJPKJ3_N7000XXKJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/035> Odin v.3 engine (ID:35)..
<ID:0/035> File analysis..
<ID:0/035> SetupConnection..
<ID:0/035> Initialzation..
<ID:0/035> Get PIT for mapping..
<ID:0/035> Firmware update start..
<ID:0/035> boot.bin
<ID:0/035> NAND Write Start!!
<ID:0/035> cache.img
<ID:0/035> factoryfs.img
<ID:0/035>
<ID:0/035> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Are you repartitioning your device while flashing ?
Akiainavas said:
Are you repartitioning your device while flashing ?
Click to expand...
Click to collapse
no
How can I know that the rom is suitable for my device ?
Here you go:
http://forum.xda-developers.com/showthread.php?t=1424997
Use dr. ketan's list to get firmware for your device. In theory it's best to use the one that came with your phone - but honestly, every other should work. Choose one from directly rootable according to location/carrier your phone came from.
still not working, odin failed
First uninstall kies n install just driver from stock rom thread(same u hav mentioned in some above post). There is 32 n 64 bit drivers, install according your OS of pc.
Connect direct to pc, dont use extension cable, n preferably back side of pc
Put device in download mode (vol DOWN + home + power) once it will ask to continue, thn will enter in download mode
Now reflash rom.
Sent from my GT-N7000 using xda premium
i am using laptop Vista 32-bit system is that make difference?
May be, rwmove kies n just install 32bit driver
N try
Confirm your device in download mode
Sent from my GT-N7000 using xda premium
removed kies , re installed driver turned off antivirus with firewall
restart and try again with same message, failed
Have you put device in dowload mode?
Dont put rom file too deep inside folder. Just put in a folder on root directory.
If not works then try another pc at last option.
Sent from my GT-N7000 using xda premium
yes used the mobile in download mode
i will try another pc
thank you
have you fix your problem??? ihave the same situation,,pls help me
no not yet, someone advise me to use jig usb
Succeeded to download the rom and the device restart but get back to the first problem
freeze on galaxy note start screen
Dr-Ketan,
Could you tell me what could cause a phone to get stuck at factoryfs.img? Also my galaxy note can only mount to USB storage from clockworkmod, if I mount sdcard, it won't show up on the computer. So only USB storage can be seen in computer. Does this mean the sdcard is dead? Thanks.
Hi,
I have Galaxy note with Kernel version 2.6.35.7...LA6, Slovenia (SiMobil). As far is i understood from here:
http://forum.xda-developers.com/showthread.php?t=1329360
It's no directly rootable, so i used InitialCFRootFlasher (CF-Root-SGN_XX_SER_LA6-v5.0-CWM5). What happened is visible in the Attachment image - it stops (left it for 30 minutes and then plugged the phone out) at pushing zImage (there is zImage file in zImage folder).
I also tried downgrading to KJ1 (4th post in the link i've provided) and Odin got stuck here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
As far as i know, i've followed all the steps correctly, i've started odin in recovery mode thingy (and with phone turned on, everything :/) and it gave pretty much the same results. I have unknown sources and USB debugging checked.
Only one thing (if it happens to be relevant): i've reset the phone from recovery mode (volume+home+power) before doing all this and the only visible difference now (except of course from everything gone) is that it now asks me for USB Connection (Copy from/to computer) and it did connected automaticly before.
Also, the keyboard layout has numbers so it reseted to the point of the latest patch.
Help wold be appreciated, thank you for your time.
0bj4ct7
what is the rom version? if its is LA6 then it it not directly rootable and you need to downgrade to root then upgrade again using mobile odin to keep root status
As i said it is LA6 and i tried to downgrade to KJ1 from the link i have posted. Thus the Odin error message in my first post :/
I'm now downloading LA1 from this tutorial:
http://forum.xda-developers.com/showthread.php?t=1535025
and will try to flash/root it with Odin.
Anyone knows why it didn't want to connect the first time? (see the Odin log)
btw my goal is to install CheckROM Note HD 6 with mobile odin after rooted.
Sorry for the double-post, but this is what happened with take 2 on Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
So eventually the same thing happened: It failed to establish connection with my phone, has anyone any idea why and how could i make it work? :/
strange !!
tell you what ,just to be sure :
1. is it odin 1.8.5 , if not then download from this link http://dl.xda-developers.com/attachdl/3f3aee012a84b80d9824245ec63e1c5a/4f99a80d/8/1/5/3/7/0/Odin3-v1.85.zip
2. check your cable ,use another cable if you have any.
3. follow this method by DR.Ketan
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: https://rapidshare.com/files/369028110/SGN_XX_OXA_KJ1_FACTORYFS.zip
(special thanx to schiwa for providing premium a/c to host file)
Code:
Mirror for Above file (in case above link not works then only)
Download this three files
[url]http://www.mediafire.com/?7vf637co8frdqqg[/url]
[url]http://www.mediafire.com/?kkvdsf5vh8zipzi[/url]
[url]http://www.mediafire.com/?l6qqicvibzhxt18[/url]
- Tool to join them, run the following file and locate the .001 file.
[url]http://www.mediafire.com/?btrusgmd1v2d72q[/url]
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
also check this thread http://forum.xda-developers.com/showthread.php?t=1329360
Thanks to all here, it turned out i actually wasn't using download, but recowery mode
After i actually pressed VOL. DOWN at the beginning it worked perfectly.
Thanks for all the answers, I'd recommend emphasizing tese keys so people like me won't repeat this.
Cheers (CheckROM works perfectly
hi people,
So here is my issue, i rooted my tab after having it about a year and wanted to install a custom rom, installed RomManager from the market and installed the clockwork recovery mod, BUT i picked galaxy tab 10.1 when it asked me what phone i had, as there was no other option. I checked on google first and it seems other people with the 8.9 are using the clockwork recovery mod so i thought it was safe.
Now its dead and powers up to the samsung logo, and then dies again.
Help! (currently i am draining the battery as it is mentioned in another thread in this forum)
Thanks
(tried the APX thing in nvflash and it was a no go)
epictwiglet said:
hi people,
So here is my issue, i rooted my tab after having it about a year and wanted to install a custom rom, installed RomManager from the market and installed the clockwork recovery mod, BUT i picked galaxy tab 10.1 when it asked me what phone i had, as there was no other option. I checked on google first and it seems other people with the 8.9 are using the clockwork recovery mod so i thought it was safe.
Now its dead and powers up to the samsung logo, and then dies again.
Help! (currently i am draining the battery as it is mentioned in another thread in this forum)
Thanks
(tried the APX thing in nvflash and it was a no go)
Click to expand...
Click to collapse
It's alright. Go to the guide in my signature and read up about ODIN because you will use it to save your tablet. It's all there in FAQs, How-tos and the Toolkit at the end.
i highly recommend checking out nirogu325's guide for an explanation of ODIN. it should solve your problem
Download Odin
http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=4EbBRrWss7eeO2JNr8TzzA
Download the proper recovery
7310 and 7300
http://forum.xda-developers.com/showthread.php?t=1312218
i957
http://forum.xda-developers.com/showthread.php?t=1462770
Power on the tablet, you may need to charge it.
As it is powering on hold down the power and the vol down button
Go into download, not recovery
Connect your tablet to your computer with the USB cable
Open up Odin
You should see box that says PDA, click there and it will want you to find a file. Choice the recovery file
Make sure the box that says partition or repartion are NOT check
then check start and wait. DO NOT touch or disconnect the tablet while it works
bdfull3r said:
i highly recommend checking out nirogu325's guide for an explanation of ODIN. it should solve your problem
Download Odin
http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=4EbBRrWss7eeO2JNr8TzzA
Download the proper recovery
7310 and 7300
http://forum.xda-developers.com/showthread.php?t=1312218
i957
http://forum.xda-developers.com/showthread.php?t=1462770
Power on the tablet, you may need to charge it.
As it is powering on hold down the power and the vol down button
Go into download, not recovery
Connect your tablet to your computer with the USB cable
Open up Odin
You should see box that says PDA, click there and it will want you to find a file. Choice the recovery file
Make sure the box that says partition or repartion are NOT check
then check start and wait. DO NOT touch or disconnect the tablet while it works
Click to expand...
Click to collapse
So i dont need the clockwork recovery mod files? just the stock recovery? and it wont boot to download mode so i cant connect it to odin unless im missing something, let me read it again.....
Ok! i have managed to get to download mode, i discharged the tab overnight and plugged it in this morning and he booted past the samsung logo, i cant remember what thread i saw that idea in but it worked. awesome, now to try and flash stock recovery, hope i dont duck it up!
Thanks guys, ill post again if it doesnt work @)
nirogu325 said:
It's alright. Go to the guide in my signature and read up about ODIN because you will use it to save your tablet. It's all there in FAQs, How-tos and the Toolkit at the end.
Click to expand...
Click to collapse
all i get is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> recovery.img.md5 is invalid.
<OSM> End...
Booooo, now what? im using an old version of odin, so maybe ill try and new one?
Solved! So i was putting the MD5 file and it wasnt working, so i put the whole .RAR file in and it worked! It wouldnt flash the clockwork recovery mod though so i had to put the stock one back on.
Still it works again, thanks guys.
epictwiglet said:
Solved! So i was putting the MD5 file and it wasnt working, so i put the whole .RAR file in and it worked! It wouldnt flash the clockwork recovery mod though so i had to put the stock one back on.
Still it works again, thanks guys.
Click to expand...
Click to collapse
I am glad you have your tablet back in working order.
Well now that you have the stock recovery, you can attempt to flash the Clockwork recovery again the right way if you want to. You now know how to recovery your tablet if you have a brick again so you don't have anything to lose
hi can someone help me with a brick i957. i am not seeing anything on the lcd its totally black however when i plug the usb to the pc its being recognized as Qualcom hs-usb diagnostics 9006. i thought well maybe i can flash it with odin but this is all i am getting:
<ID:0/155> Added!!
<ID:0/155> Removed!!
<ID:0/155> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWMR5x_i957_recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/155> Odin v.3 engine (ID:155)..
<ID:0/155> File analysis..
<ID:0/155> SetupConnection..
and its been there for almost 45 mins with no response. any help will be greatly appreciated.
Linkzz said:
hi can someone help me with a brick i957. i am not seeing anything on the lcd its totally black however when i plug the usb to the pc its being recognized as Qualcom hs-usb diagnostics 9006. i thought well maybe i can flash it with odin but this is all i am getting:
Added!!
Removed!!
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CWMR5x_i957_recovery.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:155)..
File analysis..
SetupConnection..
and its been there for almost 45 mins with no response. any help will be greatly appreciated.
Click to expand...
Click to collapse
If Odin recognizes the tab there is a chance to recover it. What rom are you trying to flash? Go to sammobile.com and get the stock gb rom.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
i am using a stock rom from sammy roms but same problem
<ID:0/155> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I957UCLK4_CL1167230_REV02_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/155> Odin v.3 engine (ID:155)..
<ID:0/155> File analysis..
<ID:0/155> SetupConnection..
Try with odin ver 1.85. I haven't had luck with 3.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Try with odin ver 1.85. I haven't had luck with 3.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
thats what i have been using; when i try with odin3 v3.07 its not recognizing the tablet
I know it doesn't make sense but keep trying to flash the rom. I've seen it not work for many tries and then it would for some reason. If odin recognizes the tab you are not hard bricked. You should be able to get it to operate again.
Also, use the gb Rom, uckj7
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
I've seen Notes being stuck there, and mostly they are bricked cause of emmc or a corrupted kernel. Are yiu sure didn't flash anything? What was your last activity before your Note died?
vlxdxmxr said:
I've seen Notes being stuck there, and mostly they are bricked cause of emmc or a corrupted kernel. Are yiu sure didn't flash anything? What was your last activity before your Note died?
Click to expand...
Click to collapse
i was just playing a game from android market,
my phone has never been flashed everything was official and working well
what's emmc or the kernel thing,
sorry to ask but i'm a total noob at this.
and is there a way to fix this?
MrPlox said:
what's emmc or the kernel thing,
sorry to ask but i'm a total noob at this.
and is there a way to fix this?
Click to expand...
Click to collapse
hmmm from the sounds of it... your phone is not brick... it just entered into a very deep slumber mode...
one thing you can revive to wake it is perhaps to get a usb jig and revive your phone using it.
Or, you can try Holding the power button down, holding Volume key Down and the Home key all at the same time.....while your phone is plug to the charger...
See if something will come up on the screen....
letters_to_cleo said:
hmmm from the sounds of it... your phone is not brick... it just entered into a very deep slumber mode...
one thing you can revive to wake it is perhaps to get a usb jig and revive your phone using it.
Or, you can try Holding the power button down, holding Volume key Down and the Home key all at the same time.....while your phone is plug to the charger...
See if something will come up on the screen....
Click to expand...
Click to collapse
when i push the volume down+home+power button it goes into download mode and it asks me if i want to restart the phone or continue putting another OS on it
MrPlox said:
when i push the volume down+home+power button it goes into download mode and it asks me if i want to restart the phone or continue putting another OS on it
Click to expand...
Click to collapse
Flash gb rom use pc odin only, after flashing gb rom if still stuck in logo go to recovery mode and wipe data and cache.
jonpaslim said:
Flash gb rom use pc odin only, after flashing gb rom if still stuck in logo go to recovery mode and wipe data and cache.
Click to expand...
Click to collapse
Reflash ICS v4.0.4 its will improve the battery performance via pc odin
well i tried to flash another one but it gets stuck at NAND write and stays there
MrPlox said:
well i tried to flash another one but it gets stuck at NAND write and stays there
Click to expand...
Click to collapse
Which Rom you are trying to flash ? Please post the details...
And I recommend you to flash a pre rooted GB Rom/Directly Rooted GB Rom via PC Odin..
sahilarora2003 said:
Which Rom you are trying to flash ? Please post the details...
And I recommend you to flash a pre rooted GB Rom/Directly Rooted GB Rom via PC Odin..
Click to expand...
Click to collapse
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
MrPlox said:
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
Click to expand...
Click to collapse
Read this http://forum.xda-developers.com/showthread.php?t=1810954
Follow Dr.Ketan guide,you will be fine...:good:
MrPlox said:
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
Click to expand...
Click to collapse
http://d-h.st/HJM
Flash it via PCODIN
MrPlox said:
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
Click to expand...
Click to collapse
It should not happen such with you...
If you are out of battery on official ROM, generally by getting it charged back can resolve the issue...
Try to recall, you must Gabe something else...
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
MrPlox said:
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
Click to expand...
Click to collapse
Did get any help?
I have the same problem.
I wasn't using any custom rom
I have Galaxy Note N7000
i was running stock ICS 4.0.4 (open Germany) [N7000XXLRK_N7000DBTLRK_DBT]
My phone was rooted but with no custom binary counts.
I install beat audio driver and I count restart my phone. it was stuck on the samsung screen
I didnt have any back up so i tried to use Odin and re-flash my stock ICS firmware but its stuck at NAND write start!!!
I have read so many threads but it hasn't helped. it seems like almost everyone is using custom roms
i even got one binary count follow the tutorial on this thread after i flashed a kernel (4pda_kernel.tar) http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Ive also tried stock gingerbread still stock there..
My phone is able to enter recovery mode or download mode or stock in the samsung screen..
PLEASE can someone help with something that works..?
sahilarora2003 said:
http://d-h.st/HJM
Flash it via PCODIN
Click to expand...
Click to collapse
well imma try just flashing stock ics from dr Ketan right now and i'll let you guys know what the result is
well i tried flashing a stock GB rom with odin 1.85 i followed everything step by step an odin gets stuck at zImage:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> zImage
i tried other cable, other usb ports even other computer and always same results can anyone help me out plz
MrPlox said:
well i tried flashing a stock GB rom with odin 1.85 i followed everything step by step an odin gets stuck at zImage:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> zImage
i tried other cable, other usb ports even other computer and always same results can anyone help me out plz
Click to expand...
Click to collapse
Havent seen any update from u... have u managed to rectify the issue?
nokiamodeln91 said:
Havent seen any update from u... have u managed to rectify the issue?
Click to expand...
Click to collapse
no havan't been able to fix it yet it's a pretty tough issue, now i'm following a guide to completely repartition the phone cuz there might be a bad sector
Try re-flash back with PCODIN and once flashed and still stuck at 'samsung' boot screen, press vol up + home + power button and do a factory reset. Then reboot system/wipe data cache.
I've been reading posts on this forum for about 2-3 hours now and I still have some questions.
I have a galaxy s advance with android version 2.3.6 and baseband version XXLK2
i48.tinypic.com/2rz78sm.png
I was planning on rooting my phone and then maybe installing a custom ROM on it.
But I couldn't find a rooted firmware for my region (BELGIUM). And I also couldn't find the stock firmware for my region.
Neither on sammobile.com and neither on samsung-updates.com
My first question is: can I use rooted firmware that's for another region or will this cause problems for me?
My second question is: can I use rooted firmware with another baseband version than XXLK2?
Third question: if the answer on the first two questions is no, how am i supposed to root my phone then?
fourth and for now the last question: what is twrp recovery, and what is it used for, do I need it to root my phone or flash roms?
Thanks in advance!
ahmett75 said:
I've been reading posts on this forum for about 2-3 hours now and I still have some questions.
I have a galaxy s advance with android version 2.3.6 and baseband version XXLK2
i48.tinypic.com/2rz78sm.png
I was planning on rooting my phone and then maybe installing a custom ROM on it.
But I couldn't find a rooted firmware for my region (BELGIUM). And I also couldn't find the stock firmware for my region.
Neither on sammobile.com and neither on samsung-updates.com
My first question is: can I use rooted firmware that's for another region or will this cause problems for me?
My second question is: can I use rooted firmware with another baseband version than XXLK2?
Third question: if the answer on the first two questions is no, how am i supposed to root my phone then?
fourth and for now the last question: what is twrp recovery, and what is it used for, do I need it to root my phone or flash roms?
Thanks in advance!
Click to expand...
Click to collapse
do you want to stay with gingerbread, or upgrade to jellybean?
because rooting and flashing is much tougher in gb than in JB! tell me that i can help you.
Hi,
I got the same phone / baseband version in Austria. Downloaded XXLK2 firmware from sammobile.com, used simg2img to extract system.img, add su binary (=rooted), made a new system.img with make_ext4fs and flashed with heimdall. Meanwhile I used the same procedure to root and flash the jelly bean firmware XXLPY released for the russian market. Therefore I guess you can also flash a different version of gingerbread.
tom
Brainiac.shri said:
do you want to stay with gingerbread, or upgrade to jellybean?
because rooting and flashing is much tougher in gb than in JB! tell me that i can help you.
Click to expand...
Click to collapse
First i want to root my phone and then i want to install custom roms.
Sent from my GT-I9070 using xda app-developers app
RealBorg said:
Hi,
I got the same phone / baseband version in Austria. Downloaded XXLK2 firmware from sammobile.com, used simg2img to extract system.img, add su binary (=rooted), made a new system.img with make_ext4fs and flashed with heimdall. Meanwhile I used the same procedure to root and flash the jelly bean firmware XXLPY released for the russian market. Therefore I guess you can also flash a different version of gingerbread.
tom
Click to expand...
Click to collapse
But i'm from belgium and i couldnt find one for belgium. So you live in austria and downloaded the firmware for austria?
Sent from my GT-I9070 using xda app-developers app
ahmett75 said:
First i want to root my phone and then i want to install custom roms.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
if u upgrade to JB, root is a one step, 5 min process after which it takes a few more minutes to start flashing roms after flashing a new kernel with Clockworkmod. if u wanna start with jellybean, go here.http://forum.xda-developers.com/showthread.php?t=2094318(make sure u install the stock samsung rom first , then root then install recovery, then flash a custom rom) this WILL NOT void ur warranty
on the other hand rooting gingerbread is incredibly complex. if u wanna do that go to this thread http://forum.xda-developers.com/showthread.php?t=1985199
its totally safe to flash anither country firmware using odin.then root the supported firmware. also this will void your warranty,
then to install a new kernel with TWRP recovery , go here : http://forum.xda-developers.com/showthread.php?t=1873119
then finally choose the custom rom u want Jetmod or supressed and flash using TWRP(assuming you know how to atleast nter download and recovery mode!)
do all this in the same order.
Brainiac.shri said:
if u upgrade to JB, root is a one step, 5 min process after which it takes a few more minutes to start flashing roms after flashing a new kernel with Clockworkmod. if u wanna start with jellybean, go here.http://forum.xda-developers.com/showthread.php?t=2094318(make sure u install the stock samsung rom first , then root then install recovery, then flash a custom rom) this WILL NOT void ur warranty
on the other hand rooting gingerbread is incredibly complex. if u wanna do that go to this thread http://forum.xda-developers.com/showthread.php?t=1985199
its totally safe to flash anither country firmware using odin.then root the supported firmware. also this will void your warranty,
then to install a new kernel with TWRP recovery , go here : http://forum.xda-developers.com/showthread.php?t=1873119
then finally choose the custom rom u want Jetmod or supressed and flash using TWRP(assuming you know how to atleast nter download and recovery mode!)
do all this in the same order.
Click to expand...
Click to collapse
So what i'm going to do is:
1. download JB and install it
2. Root
3. then install twrp recovery
4. Flash a kernel with clockworkmod (which kernel do you suggest?)
5. Flash custom roms
Is this the correct order or am i wrong?
ahmett75 said:
So what i'm going to do is:
1. download JB and install it
2. Root
3. then install twrp recovery
4. Flash a kernel with clockworkmod (which kernel do you suggest?)
5. Flash custom roms
Is this the correct order or am i wrong?
Click to expand...
Click to collapse
You can't install any recovery by itself. It comes with kernel. Only kernel with permanent recovery - CWM is ThunderZap now.
1. Download JB, flash it with Odin. - go again to recovery - do factory reset.
2. Root with root.zip from stock recovery
3. Install kernel with CWM (ThunderZap) with dd command in terminal editor
4. Flash custom ROM from CWM recovery.
shut_down said:
You can't install any recovery by itself. It comes with kernel. Only kernel with permanent recovery - CWM is ThunderZap now.
1. Download JB, flash it with Odin. - go again to recovery - do factory reset.
2. Root with root.zip from stock recovery
3. Install kernel with CWM (ThunderZap) with dd command in terminal editor
4. Flash custom ROM from CWM recovery.
Click to expand...
Click to collapse
i'm going to give it a try, waiting for the download to finish
UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Одг: [Q] questions about rooting, flashing, ...
ahmett75 said:
UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
Added!!
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Not recovry, in download mode. Did you unpack file. It should be around 700MB, not 400.
In recovery after flsshing, to do factory reset.
Sent from Galaxy S Advance
exchange exprsee
shut_down said:
Not recovry, in download mode. Did you unpack file. It should be around 700MB, not 400.
In recovery after flsshing, to do factory reset.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
ok, so now i've runned odin as admin, loaded the firmware and i get this.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
then i go into download mode and connect my phone and i get this.
<ID:0/003> Added!!
i've read that something has to turn yellow, or isn't that necessary?
EDIT: i just pressed start and it is installing i think
Одг: [Q] questions about rooting, flashing, ...
ahmett75 said:
ok, so now i've runned odin as admin, loaded the firmware and i get this.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
then i go into download mode and connect my phone and i get this.
<ID:0/003> Added!!
i've read that something has to turn yellow, or isn't that necessary?
EDIT: i just pressed start and it is installing i think
Click to expand...
Click to collapse
Search google "samsung download mode" and you should see image of it. When you power your phone with vol.down+home+power you get question do you want to continue. You press volume up to confirm. And after that with your phone connected and file in PDA hit start.
Sent from Galaxy S Advance
ahmett75 said:
UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I have a similar issue. In Odin/Download mode I tried flashing Jelly Bean. Here is what I get from Odin:
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> power_management.bin.md5
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In red on the screen is "CUSTOM PWR MGT BINARY !!"
Did a factory reset. Same issue. Turned on Settings -> Applications -> Development -> USB Debugging + Allow mock locations. Same issue.
Any ideas?
JBAdvXDA said:
I have a similar issue. In Odin/Download mode I tried flashing Jelly Bean. Here is what I get from Odin:
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> power_management.bin.md5
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In red on the screen is "CUSTOM PWR MGT BINARY !!"
Did a factory reset. Same issue. Turned on Settings -> Applications -> Development -> USB Debugging + Allow mock locations. Same issue.
Any ideas?
Click to expand...
Click to collapse
How much time does this take? Maybe try to redownload firmware file.
shut_down said:
How much time does this take? Maybe try to redownload firmware file.
Click to expand...
Click to collapse
Maybe 10seconds.
I downloaded Odin3.07 (Was using Odin3v1.7). From: http://forum.xda-developers.com/showthread.php?t=2086965
It is still showing in red "CUSTOM *** BINARY !!!!" but is now progressing to other components.
Will report back.
JBAdvXDA said:
Maybe 10seconds.
I downloaded Odin3.07 (Was using Odin3v1.7). From: http://forum.xda-developers.com/showthread.php?t=2086965
It is still showing in red "CUSTOM *** BINARY !!!!" but is now progressing to other components.
Will report back.
Click to expand...
Click to collapse
It should last couple minutes. Something is wrong at start. I am not saying redownload Odin, whole firmware file. But you did unpack it from zip, it should be noticable that it is corrupted when you did that on pc.
shut_down said:
It should last couple minutes. Something is wrong at start. I am not saying redownload Odin, whole firmware file. But you did unpack it from zip, it should be noticable that it is corrupted when you did that on pc.
Click to expand...
Click to collapse
Thanks.
Used Odin3v3.07 to install JB and it boots! Now the baseband version is "Unknown" and I have no service.
JBAdvXDA said:
Thanks.
Used Odin3v3.07 to install JB and it boots! Now the baseband version is "Unknown" and I have no service.
Click to expand...
Click to collapse
Try wiping cache reset in stock recovery and problem solve
I've succesfully upgraded to JB, rooted and flashed kernel.
Any suggestions about ROMS for i9070 ?