I went through the threads in the Development forum and couldn't find links for CWM Recovery for my Galaxy P1000.
It is unrooted and still on stock firmware. I wanted to be quite sure while installing. Will the one for P1010 work ? (found it in the Development section)
And after that should I install CM9 nightly through the CWM installed ?
Thanks
Flash overcome kernel and you get cwm recovery.
Sent from my GT-P1000 using XDA
priyana said:
Flash overcome kernel and you get cwm recovery.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Okay doing that
Thanks
Hello Galaxy S Community, I have just purchased a Galaxy S and its coming with android 2.1 stock. I wanna know, whats the fastest and most stable rom for the Galaxy S and whats the fastest and most stable kernel for the Galaxy S?
Edit: I just updated it to 2.3.3 JVN Via Samsung Kies but I am no noob with odin, i just wanted to update via kies .
For stock rom the best kernel is the Sempahore kernel: http://forum.xda-developers.com/showthread.php?t=1112908
Form CM7/MIUI you can you the glitch kernel: http://forum.xda-developers.com/showthread.php?t=1041532
There are most of kernels, but for stock rom the semaphore kernel is better
flowerpower84 said:
For stock rom the best kernel is the Sempahore kernel: http://forum.xda-developers.com/showthread.php?t=1112908
Form CM7/MIUI you can you the glitch kernel: http://forum.xda-developers.com/showthread.php?t=1041532
There are most of kernels, but for stock rom the semaphore kernel is better
Click to expand...
Click to collapse
I definately dont wanna stay on stock touchwiz cause i dont like the interface. What do you think about the 4.0.4 roms? Does all the hardware work or is it in alpha/beta? What about ICS Kernels? Should i flash ICS or flash a Gingerbread rom (CM7, etc)? Sorry about all the questions but there are so many roms/kernels that I just have no clue which one to use.
You could try latest CM9 nightly with Semaphore 1.2.2 or latest mnics or Devil kernel.
After 3 or 4 circle battery charges I'd think it will offer to you good performance and good battery life, but I'm supposing it.
Try them and after that tell us about
I hope it helps you!
I m using ics333 no bugs, good ram management, good battery life my first rom after buying galaxy S
Sent from my GT-I9000 using XDA
For GB, jw6+midnight kernel
Ive download slim ICS (samsung base, device essentials (i9000) and slim gapps). how do i install as it has no odin.tar, just update.zip and im on stock gb so i have no cwm. i tried downloading cwm from here:http://forum.xda-developers.com/showthread.php?t=1089989 but the ezodin link is dead so i have no way of installing. also.
alb3rtt said:
Ive download slim ICS as it seems to include everything i want. how do i install as it has no odin.tar, just update.zip and im on stock gb so i have no cwm. i tried downloading cwm from here:http://forum.xda-developers.com/showthread.php?t=1089989 but the ezodin link is dead so i have no way of installing.
Click to expand...
Click to collapse
Here is my ezodin kit, unzip, read .txt
http://db.tt/MOGZx01S
Sent from my GT-I9000 using xda premium
should i install cm9 first, then slim ics?
alb3rtt said:
should i install cm9 first, then slim ics?
Click to expand...
Click to collapse
Yes.
alb3rtt said:
should i install cm9 first, then slim ics?
Click to expand...
Click to collapse
Full instructions on slim site......see link in my sig
Sent from my GT-I9000 using xda premium
do i have to flash semaphore kernel after slimics or does cm9 (or slimics) come with semaphore kernel in it?
i downloaded you ezbase 4. i extracted it and read the guide. if i do this, will it install cwm for gb? im on stock 2.3.3 (jvn).
alb3rtt said:
do i have to flash semaphore kernel after slimics or does cm9 (or slimics) come with semaphore kernel in it?
i downloaded you ezbase 4. i extracted it and read the guide. if i do this, will it install cwm for gb? im on stock 2.3.3 (jvn).
Click to expand...
Click to collapse
Flash the ROM with.pit, let it reboot then boot back to download, flash the root kernel, let it reboot and you are on rooted ROM, copy nightly, base, essentials and gapps to sd card, then follow instructions for flashing sequence, after, if you want semaphore download and flash that, make sure you use the s version as slim has the large ram patch
Sent from my GT-I9000 using xda premium
slaphead20 said:
Flash the ROM with.pit, let it reboot then boot back to download, flash the root kernel, let it reboot and you are on rooted ROM, copy nightly, base, essentials and gapps to sd card, then follow instructions for flashing sequence, after, if you want semaphore download and flash that, make sure you use the s version as slim has the large ram patch
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
thanks, thats much clearer now sorry for the headache but im a noob in the galaxy s forum
alb3rtt said:
thanks, thats much clearer now sorry for the headache but im a noob in the galaxy s forum
Click to expand...
Click to collapse
No problem, any difficulty, just post back
Sent from my GT-I9000 using xda premium
when i tried to install the latest cm9 nightly in recovery (following the instructions) , i got E:cant open (location of cm9 nightly). should i re download it ?
i dowloaded the one at the top cm-9-20120617-NIGHTLY-galaxysmtd.zip .
alb3rtt said:
when i tried to install the latest cm9 nightly in recovery (following the instructions) , i got E:cant open (location of cm9 nightly). should i re download it ?
i dowloaded the one at the top cm-9-20120617-NIGHTLY-galaxysmtd.zip .
Click to expand...
Click to collapse
Sounds like a bad download, so yes, try again
Sent from my GT-I9000 using xda premium
slaphead20 said:
Sounds like a bad download, so yes, try again
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Did you select instal zip from recovery, or the update zip option?
Sent from my GT-I9000 using xda premium
slaphead20 said:
Did you select instal zip from recovery, or the update zip option?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
i rebooted into recovery, and pressed install zip from sd, then select update.zip.
alb3rtt said:
i rebooted into recovery, and pressed install zip from sd, then select update.zip
Click to expand...
Click to collapse
i redownloaded it and did the install procedure and it came up again. (cant open cm9 update). my cwm is cwm 3, might that be the problem? (i did everything like you ezbase guide said)
I already rooted my gnote by using method stated by dr ketan and thanks for the tutorial so what should I do next?
I installed mobile odin so i just flash the HydraCore then flash rom?
Anythings I need backup before flashing?
Which rom is good for speed and battery life?
You have flashed hydracore?
If yes then make a nandroid backup via cwm and then flash any custom ROM with their respective flashing instructions.
Sent from my GT-N7000 using xda premium
ral7 said:
You have flashed hydracore?
If yes then make a nandroid backup via cwm and then flash any custom ROM with their respective flashing instructions.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
We no need backup the system files right? What we need to backup just apps we installed and some personal settings right?
You need to do backup of your boot and system and all as they are important and if anythg will go wrong then they will help you in regaining your phone at a old condition.
Sent from my GT-N7000 using xda app-developers app
If i done backup my files, what rom i can use for hydracore kernel?
How to flash rom? Any tutorial link for that?
Hit thanks button please.....
And any rom you want..depends on you...you may follow dr ketan for stock and jeetu1981 for any custom rom....and you may check android developement section please.
Sent from my GT-N7000 using xda app-developers app
shivg86 said:
Hit thanks button please.....
And any rom you want..depends on you...you may follow dr ketan for stock and jeetu1981 for any custom rom....and you may check android developement section please.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Can have more details on it because i still very confusing, i read the post on this link http://forum.xda-developers.com/showthread.php?t=1749863 it say Supports Touchwiz ICS, AOKP, AOSP, CM9 , CM10, JellyBean, ParanoidAndroid, MIUI roms. So mean CyanogenMod 10, paranoidandroid, AllianceROM and other roms all can use without take note on this caution - Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK!? Can you suggest one rom that you feel most stable and best to use at this moment?
Please flash hydracore kernel. Its a safe kernel and maybe then flash "cleaNote" ROM or any other ROM. Whatever you do just flash hyrdacore kernel and be safe.
Sent from my GT-N7000 using xda premium
happy43ver said:
Can you suggest one rom that you feel most stable and best to use at this moment?
Click to expand...
Click to collapse
latest stock ICS Rom
Hello everyone,
I was just wondering if there is any way to return to CyanogenMod 10.2 from Official Jelly bean 4.1.1, I installed the zip folder along with the Gapps but when I try to install them via CMW it says installation aborted, even when I tried to reinstall the official ICS ROM but still the same problem, any help please!!
What kernel/recovery do you have?
Sent from my GT-N7000 using XDA Premium 4 mobile app
SpyderTracks said:
What kernel/recovery do you have?
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Clockworkmod 6.0.1 the latest version
first flash a CM based kernel from recovery.. the reboot recovery from the CWM menu and then perform wipes and flash the new rom
nokiamodeln91 said:
first flash a CM based kernel from recovery.. the reboot recovery from the CWM menu and then perform wipes and flash the new rom
Click to expand...
Click to collapse
Do you suggest a specific kernel??
A CM kernel
http://forum.xda-developers.com/showthread.php?t=1789397
I have a Galaxy S with 10.1.3
But when I try updating to 10.2.1 it seems to fail
And I can't flash it with CWM. as thats when I get the error 7
Do I need to update CWM? or shall I just try another ROM like MIUI?
You can try to flash Stock 2.3.6 XWJVZ by Odin, root it by CF-Root or Semaphore kernel and then install clean CM10.2 by CWM. I think it should work.
Wysłane z mojego GT-I9000
Thanks Pit. I shall give that a go. Need to find the stock ROM now!
Sent from my LG-P880 using XDA Free mobile app
Captain Sisko said:
Thanks Pit. I shall give that a go. Need to find the stock ROM now!
Sent from my LG-P880 using XDA Free mobile app
Click to expand...
Click to collapse
For those following this thread
I restored the device to 2.2 Fro-Yo then I flashed it to Gingerbread before installing
CF-Root-XX_OXA_JW4-v4.4-CWM3RFS which rooted and installed the latest CWM recovery
Then installed C-Rom KK 6.6
Device running fine