I installed CM9 last month on my i9000. Everything has fine until 3 days ago !
my laptops does not recognize my phone anymore. Now it says "Device not recognized".
First i thought it was the cable, then the laptop. But i tryied 3 ou 4 diferent combinations and... nothing.
I read and read dozens of post and no good solution until now.
I cleaned the port with a tooth brush , i installed CM10, i made some strange keys combinations.... and nothing.
The despair is taking over me. The most strange thing is that the phone charges normally connected to the power suply or via USB.
I cannot go back to STOCK ROM because even on Download Mode the phone is no recognized by Odin. Yes, i installed and removed all drivers that you can imagine !
Can anyone please help me ??
It propably is dead. Search on Google and you'll find instructions how to replace it.
tonimanager said:
Can anyone please help me ??
Click to expand...
Click to collapse
try connection problems solutions in My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card....
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu>Settings>Applications>Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
Related
Hi, my Touch HD is still under warranty but I'm running Hard SPL 1.56.Olinex.
My USB is not working, it just charges my phone. My SD Card reader is also not working... So I can only connect via BT and I can't find any way of restoring SPL without USB/SD... Is it impossible?
mcafee545 said:
Hi, my Touch HD is still under warranty but I'm running Hard SPL 1.56.Olinex.
My USB is not working, it just charges my phone. My SD Card reader is also not working... So I can only connect via BT and I can't find any way of restoring SPL without USB/SD... Is it impossible?
Click to expand...
Click to collapse
Do u try a HARD RESET? If you try a Hard Reset and still have the same Problem you can do some of the things.. tell me witch ROM u use.. maybe the USB problem that don`t wana sync is from the ROM.. also sometimes when you flash a 6.5 ROM the CARD is not visable one FOrmat normaly will clear the things but its bad when you cannot conetc to format via PC
The Best you can do is to flash Another ROM via SD Card but 1st you need to make your SD card working so if you have some SD adapter or some other device that you can take out your SD card from the Phone and conect it directly to the PC will be perfect to FORMAT it.. Once the problem with your CArd is fixed you can just put there some new ROM and Flash the Device...
Its very Bad when on the same time the USB and Card not working but don`t worry you can fix the things but its not so easy.
I'm running official HTC Touch HD_MR_2009_RUU_BlackStone_HTC_PTG_1.56.410.0_Radio_52.62.25.34_1.13.25.24_Ship.exe... I can connect to PC via BT and copy files...
mcafee545 said:
I'm running official HTC Touch HD_MR_2009_RUU_BlackStone_HTC_PTG_1.56.410.0_Radio_52.62.25.34_1.13.25.24_Ship.exe... I can connect to PC via BT and copy files...
Click to expand...
Click to collapse
Yes but the NEW Cooocked ROm is around 170MB so you will need few days to copy this via BT also when your SD card not working this is not posible because the ROM file must to be located in the root of the SD card
Now i understand that you use STOCK ROM so the best you can do is to go in HTC service for Warranty i was thinking you have a problem with Coocked ROM but when is with STOCK ROM its not your fault.
The problem is that I've installed Hard Spl... If I take it to HTC they probably are gonna say it's not covered by warranty...
If you use usb to charge your phone than datacommunication with your pc has to work.
Which OS are you running, because when you entering the bootloader your pc doesn't see your phone as a mobile device anymore.
If you're running WMDC and entering the bootloader than Vista or W7 is searching for new drivers..... If not found read this topic http://forum.xda-developers.com/showthread.php?t=524619
For XP you have to install the drivers yourself.
They can also be found in the link.
When the drivers are installed en your phone is synced than it will show USB in bootloader.
After that flash back to stock SPL
Hopefully this is will help you, your problem is very strange
Because of a not workin SD card and a not working USB
I wish you luck!
Thx! I'll give it a try tonight... but I don't think that will help because I've hard-reset the device and tried with Windows 7 and Windows XP and nor the phone nor the pc show any message.
I remember that the SD card did show up, but after a few seconds it would disappear... But now it never shows up... Already changed usb options on control panel...
The last thing I did when the SD was ok was trying Android with no luck.
I believe it's really an hardware problem and maybe I could replace the board that has SD/USB/SIM but would like to use my warranty....
If you update usb drivers there's a good chance that your device will show up on pc. Don't forget to 'enable usb connections' in activesync connections settings
Also if this doesn't work try flashing orginal stock rom which came with your device. This rom, and only this rom, will still flash as long as you are connected to pc (doesn't need to say 'usb' at bottom of bootloader). Alternatively try MTTY
Rick
I had a very similar problem when I last tried andriod. first of all my sd card dropped off, It would go in, be seen and then drop again as soon as I tried to access it. Android had corrupted it. Try reformatting your SD card fat32, copy the rom on and try updating the ROM again using your SD card.
It also busted my pc drivers on my pc, I had to uninstall them completely and then load the latest drivers. If you have another pc try it on this first before faffing with your USB drivers.
Once my sd card was back I couldnt flash any roms, no usb connection. I did a hard reset and then went into spl manually and set it running that didnt seem to work but when my phone rebooted usb was backup.
It seems andriod manager to corrupt my ROM, SD card and uSB drivers on my PC, I havent bothered with Android since and wont until there is a bootable ROM available (never)?
Your USB cable may be bad. Sometimes they stop working and pc communications stops. I've had to replace my usb cables from time to time.
mcafee545 said:
Thx! I'll give it a try tonight... but I don't think that will help because I've hard-reset the device and tried with Windows 7 and Windows XP and nor the phone nor the pc show any message.
I remember that the SD card did show up, but after a few seconds it would disappear... But now it never shows up... Already changed usb options on control panel...
The last thing I did when the SD was ok was trying Android with no luck.
I believe it's really an hardware problem and maybe I could replace the board that has SD/USB/SIM but would like to use my warranty....
Click to expand...
Click to collapse
Last time I had something like this, I had to remove the HD from windows mediaplayer. For some reason it was there as plain "storage card" if I remember correctly. After that I could connect normally with the HD again.
*Have you verified that your SD Card is actually working at all?
*-I've had a problem in the past with an "old" SD Card that wouldn't recognise properly in either my PC or my phone. Turns out all i had to do was clean the contacts on it lightly. My original 8Gb SD Card that came with my Blackstone has also completely died. It will not format, will recognise then drop-off and attempting to use it in ANY manner resulted in it becoming excessively hot - Dead card, not replaceable under warranty
*If the SD Card works in your PC, have you tried formatting it to "Device Defaults" via the PC?
*-This problem has in the past also prohibited me from using my SD Card in my Blackstone. For some devices, without certain registry tweaks enabled, only particular formats of SD Cards are recognised. I have also noticed that the card must be formatted in a particular way to be useable as a ROM Flashing card. The Blackstone simply won't read any images from the card in bootloader mode if the card is formatted improperly.
* Try another USB Cable, being able to charge via USB does NOT mean it WILL sync, for example, if your USB cable has bent/damaged contacts, or if the cable itself has a broken lead, the VCC (voltage core) and GND (ground) leads can still create a circuit to send power to the device which will enable it to charge.
*-Also try other USB ports... you never know when one maybe too dusty / dirty / faulty
* Windows 7 / Vista? Uninstall Window Mobile Device Centre (WMDC) re-download and reinstall, or allow Windows Update to do this for you after you've uninstalled. A simple registry error can fark this right up. I should know, as I recently accidentally imported my Blackstone's registry backup to my laptop... ugh that was a nightmare. Windows 7 recovered, but I spent a few days browsing with the wrong user-agent, meaning a lot of websites were redirecting to their "mobile" or "wap" counterparts...ewwww
* Windows XP? Well I can't say too much there, as I haven't used it pretty much since Vista was released years ago. Just do your best to make sure all drivers are updated appropriately.
other sd card
have you tired a different sd card there are known issues with some types of cards sd vs' sdhc and class 2 vs' class 6 cards. Also you may have a bad usb cable? Do you have .net framework installed. are you trying all this on the same computer you used to flash your phone with hspl. You can try putting your phone into bootloader mode wait for usb to appear on the bottom of the tri-color screen and then reflash stock spl from there by opening the BlackstoneRUUWrapper and going through the steps it should see your phone. See the wiki!
And why did you hspl if you have a stock rom?
I did a sim-unlock and didn't restore the spl after the process... I was waiting for the perfect 6.5 ROM...
I didn't have time to test it yesterday but I brought it with me and will try again later...
I already tested the SD in other Windows Mobile phones and was ok... The SD is not the original (Transcend) but a SanDisk 8GB but already tried it with a 2GB SD and nothing. Also tried with different cables. And in different PCs (windows xp and Windows 7). Also did a hard-reset.
Nothing worked! When I enter bootloader with usb cable connected there is no SERIAL and no USB message, but if I remove the cable it changes to SERIAL and doesn't change anymore. On the PC, with XP, W7 and Ubuntu, nothing happens... lsusb gives nothing... on device manager it doesn't show up.
Regarding the SD card, when I insert it the screen turns on, but still no storage card detected... I really think it's an hardware problem.... I ordered this, just in case, http://cnn.cn/shop/touch-simmicrousb-card-module-p-7149.html, but will still try to take it to warranty before because there is a seal over one of the screws...
Thank you all!
I was flashing 2.36 into my phone with odin, and unfortunately if failed. Therefore, I unplugged it and took out my battery, afterwards the phone won't start in any combination of keys!!!!Just a balck screen even when charging, WHAT should I do to fix it????
Someone help me pls??
Long press powerbutton
1 Try to press the power buton for a longer time,
2 Try to get back in download mode (Home button, Volume down together and press Powerbutton.
I did a lot of things with my 9000 and sometimes i was also afraid.... but i still use it.
You could try a jig from dealextreme or ebay if buttons don't work. A jig is considered fool proof, if that doesn't work your hardware would be defect and you can't ruin your hardware through ODIN.
maurice1210 said:
Just a balck screen even when charging, WHAT should I do to fix it????
Click to expand...
Click to collapse
look in My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card....
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu>Settings>Applications>Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
Take your battery out and hold on power key for 1 minute --
Then return the battery and press power + volume up + home key for 30 second ....
After that choose reboot ...
I hope it useful ^_^
Sent from my GT-I9001 using xda app-developers app
recentlly.i have updated my galaxy s i9000 from eclair to froyo but i stuck on the boot screen.them i flashed with fix named dbdata.rfs...then my phone end up with screen consisting a phone , exclamation mark and pc....i cant enter into download mode .can any one help me out? plse iam begging...:crying:
Pull out the batter, Sim and sd. After an hour put the battery back. Then try to flash a stock 3 files Rom.
Same happend to me and i could enter download mode after an hour. If it's not working for you, you may have to try with a usb jig.
Sent from my GT-I9000 using xda app-developers app
thnks 4 ur reply...then also not working
KUN1 said:
Pull out the batter, Sim and sd. After an hour put the battery back. Then try to flash a stock 3 files Rom.
Same happend to me and i could enter download mode after an hour. If it's not working for you, you may have to try with a usb jig.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
thnks 4 ur reply...then also not working..what could be the solution??
ashique785 said:
thnks 4 ur reply...then also not working..what could be the solution??
Click to expand...
Click to collapse
you are still in download mode when you have screen consisting a phone , exclamation mark and pc, so just connect to odin3 and flash a rescue kit from My Android Collections and or a solution from My Android Solutions
Need a guide, look into My Guides and Manuals
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
this kernal has no download mode option..
xsenman said:
you are still in download mode when you have screen consisting a phone , exclamation mark and pc, so just connect to odin3 and flash a rescue kit from My Android Collections and or a solution from My Android Solutions
Need a guide, look into My Guides and Manuals
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
Click to expand...
Click to collapse
i cant turn my phone on..it shows only phone+!+computer screen..plse help no ther options..this kernal has no download mode option..
ashique785 said:
i cant turn my phone on..it shows only phone+!+computer screen..plse help no ther options..this kernal has no download mode option..
Click to expand...
Click to collapse
yes, so just connect it with original USB cable when Odin3 is running ( comp port in Odin will turn yellow) and it will be able to flash ROM
Hello, by installing new update for my phone it got bricked. On the screen shows Phone ! PC but i can still enter download mode. But when i'm trying to flash new rom(have tryed pit too) i fails all the time. Should i try the thing with 301k and charger or should i give it to service?
sadafa said:
But when i'm trying to flash new rom(have tryed pit too) i fails all the time.
Click to expand...
Click to collapse
How does it fails?, as long as you can get download mode and have BSOD screen, youi can connect to Odin and flash , look at My Android Solutions for the problem you have and you can get a rescue kit from My Android Collections
Need a guide, look into My Guides and Manuals
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
hi guys i flashed my phone with nspro and no i get a black box on my screen with phone details on it
like a diagnostic screen how do i get it off or do i have to flash it again with a nother kennel.............:fingers-crossed:
happyman133 said:
hi guys i flashed my phone with nspro and no i get a black box on my screen with phone details on it
like a diagnostic screen how do i get it off or do i have to flash it again with a nother kennel.............:fingers-crossed:
Click to expand...
Click to collapse
Flash a kernel or Rescue kit from My Android Collections and or a solution from My Android Solutions
Need a guide, look into My Guides and Manuals
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3