Database Develop

flashing from SD Card ?????

hi
it is possible to write ROM from SD Card ??

Yes it is, if you have the backup rom on SD card. Enter bootloader with sd card inside the device and it will ask you whether or not to flash the rom.

i don't have backup on SD Card

why do you need to use SD flashing? this was primary designed for emergency purposes, it makes physical rewritement of all parts of ROM (could be compared with complete format of your pc, not just quick format)a and new initialization
of course, you must have SD card to take backup from - this is easy to create with various tty clients, the most used for it is mtty (putty and others could be also used)

I need to flash my harmer from sd can you write how do it??
I dont have backup on sd can make for me thiece backup and send me on mail or something like thiece ?? My harmer stop on splash screen i was flashing on cid locked maschine :|

- I tought that a SD backup was needed, and yes it is. But u can use your own phone and your own SD to do it.
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem""
In Wizard forum Ozzy give me thiece solution

I screw my Wizard....
Hi,
Im really new to all this, and... in a few words, I screw the registry of my Wizard T-Mobile, and now it doesn't boot, I can enter to the rgb mode, and, I understand that flashing from SD can help me, but, the steps described above are for restore a backup or make a backup ? Im so confused
Thanks in advance.
UPDATED: It worked great! but... just one thing, The SD is not reconigzed by my phone, is any way to format it from the Multi-Port/USB TTY ?
Regards.

Raptorgda said:
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Click to expand...
Click to collapse
I did all that you said (backed up to SD card, then restored to SD card successfully), but the problem still remains (obviously).
Is there anywhere I can simply download a 'clean' image file specially formatted for SD cards?

[Q] Is my mini-USB port death ?

I installed CM9 last month on my i9000. Everything has fine until 3 days ago !
my laptops does not recognize my phone anymore. Now it says "Device not recognized".
First i thought it was the cable, then the laptop. But i tryied 3 ou 4 diferent combinations and... nothing.
I read and read dozens of post and no good solution until now.
I cleaned the port with a tooth brush , i installed CM10, i made some strange keys combinations.... and nothing.
The despair is taking over me. The most strange thing is that the phone charges normally connected to the power suply or via USB.
I cannot go back to STOCK ROM because even on Download Mode the phone is no recognized by Odin. Yes, i installed and removed all drivers that you can imagine !
Can anyone please help me ??

It propably is dead. Search on Google and you'll find instructions how to replace it.

tonimanager said:
Can anyone please help me ??
Click to expand...
Click to collapse
try connection problems solutions in My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card....
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu>Settings>Applications>Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3

[Q] Galaxy S completely dead??

I was flashing 2.36 into my phone with odin, and unfortunately if failed. Therefore, I unplugged it and took out my battery, afterwards the phone won't start in any combination of keys!!!!Just a balck screen even when charging, WHAT should I do to fix it????

Someone help me pls??

Long press powerbutton
1 Try to press the power buton for a longer time,
2 Try to get back in download mode (Home button, Volume down together and press Powerbutton.
I did a lot of things with my 9000 and sometimes i was also afraid.... but i still use it.

You could try a jig from dealextreme or ebay if buttons don't work. A jig is considered fool proof, if that doesn't work your hardware would be defect and you can't ruin your hardware through ODIN.

maurice1210 said:
Just a balck screen even when charging, WHAT should I do to fix it????
Click to expand...
Click to collapse
look in My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card....
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu>Settings>Applications>Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3

Take your battery out and hold on power key for 1 minute --
Then return the battery and press power + volume up + home key for 30 second ....
After that choose reboot ...
I hope it useful ^_^
Sent from my GT-I9001 using xda app-developers app

[Q] Galaxy si9000 Connect to pc screen no download mode..HELP

recentlly.i have updated my galaxy s i9000 from eclair to froyo but i stuck on the boot screen.them i flashed with fix named dbdata.rfs...then my phone end up with screen consisting a phone , exclamation mark and pc....i cant enter into download mode .can any one help me out? plse iam begging...:crying:

Pull out the batter, Sim and sd. After an hour put the battery back. Then try to flash a stock 3 files Rom.
Same happend to me and i could enter download mode after an hour. If it's not working for you, you may have to try with a usb jig.
Sent from my GT-I9000 using xda app-developers app

thnks 4 ur reply...then also not working
KUN1 said:
Pull out the batter, Sim and sd. After an hour put the battery back. Then try to flash a stock 3 files Rom.
Same happend to me and i could enter download mode after an hour. If it's not working for you, you may have to try with a usb jig.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
thnks 4 ur reply...then also not working..what could be the solution??

ashique785 said:
thnks 4 ur reply...then also not working..what could be the solution??
Click to expand...
Click to collapse
you are still in download mode when you have screen consisting a phone , exclamation mark and pc, so just connect to odin3 and flash a rescue kit from My Android Collections and or a solution from My Android Solutions
Need a guide, look into My Guides and Manuals
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3

this kernal has no download mode option..
xsenman said:
you are still in download mode when you have screen consisting a phone , exclamation mark and pc, so just connect to odin3 and flash a rescue kit from My Android Collections and or a solution from My Android Solutions
Need a guide, look into My Guides and Manuals
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
Click to expand...
Click to collapse
i cant turn my phone on..it shows only phone+!+computer screen..plse help no ther options..this kernal has no download mode option..

ashique785 said:
i cant turn my phone on..it shows only phone+!+computer screen..plse help no ther options..this kernal has no download mode option..
Click to expand...
Click to collapse
yes, so just connect it with original USB cable when Odin3 is running ( comp port in Odin will turn yellow) and it will be able to flash ROM

Galaxy s i9000 brick

Hello, by installing new update for my phone it got bricked. On the screen shows Phone ! PC but i can still enter download mode. But when i'm trying to flash new rom(have tryed pit too) i fails all the time. Should i try the thing with 301k and charger or should i give it to service?

sadafa said:
But when i'm trying to flash new rom(have tryed pit too) i fails all the time.
Click to expand...
Click to collapse
How does it fails?, as long as you can get download mode and have BSOD screen, youi can connect to Odin and flash , look at My Android Solutions for the problem you have and you can get a rescue kit from My Android Collections
Need a guide, look into My Guides and Manuals
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3