Database Develop

[Q] Simply put, i'm SOL.

SOLVED: when having trouble with your computer not making a good connection to the phone, try your USB HUB on the mother board. it totally fixed my problem!
So here it is. I received a cappy from a buddy at work.
Basically, she is running cognition (FROYO BASED) rom, not sure of the kernal, and Cwm.
i can get the phone to reboot into RED CWM recovery, and even into DOWNload mode.
The phone was shut off during a factory reset. the battery died.
(IDK the girl was a dumbass and did it from settings on the phone not in CWM )
The phone will boot, ONLY after a factory reset from CWM but the setup google accs f/c's and the only thing i can get it to do is volume up/down pull the notification bar down and power off recovey dl mode...ect ect.
Task manager say's there are no APPS installed on the phone running? yet when i go LVL 2 RAM clear, the phone says 13 apps closed..
I think the Stock APK's have been deleted, since i cannot get into menu at all.
Since she factory reset the phone, and wiped the SD CARD, ALL CWM recoveries she created are GONE.
I have Cleared the cache, and wiped dalvik code, fixed permissions.....
I'm very familiar with the VIBRANTS, not the cappy's so this is a challenge to me.
my Vibrant has connected with all the usb drivers from samsung, but the cappy cannot. I've even downloaded the drivers for just the CAPPY, uninstalled all others, and Still not recognized, yet my vibrant does?
i've installed i think every driver on here for captivates, kies downloads, even went to the samsung website and Downloaded from there.
STILL NOT CONNECTING.
Even DL'd the AIO cappy toolbox (very nice to have for my VIBRANT)
Still no avail.
THE PHONE CANNOT MOUNT THE EX SD CARD. So that idea's out.
all my drivers are correct for the 32 bit vista OS. even tried on my GF's 64 Windows 7.
Still no avail.
I've installed the drivers with the phone in DOWNLOAD mode even, still not connecting.
Rebooted the computer after removing and also reinstalling drivers.
Changed between 3 diff cords, all work for my VIBRANT,
still no avail.
Any idea's would be greatly appreciated.
Thanks.

PelvicThunder said:
So here it is. I received a cappy from a buddy at work.
Basically, she is running cognition rom, not sure of the kernal, and Cwm.
i can get the phone to reboot into RED CWM recovery, and even into DOWNload mode.
The phone was shut off during a factory reset. the battery died.
(IDK the girl was a dumbass and did it from settings on the phone not in CWM )
The phone will boot, ONLY after a factory reset from CWM but the setup google accs f/c's and the only thing i can get it to do is volume up/down pull the notification bar down and power off recovey dl mode...ect ect.
Task manager say's there are no APPS installed on the phone running? yet when i go LVL 2 RAM clear, the phone says 13 apps closed..
I think the Stock APK's have been deleted, since i cannot get into menu at all.
Since she factory reset the phone, and wiped the SD CARD, ALL CWM recoveries she created are GONE.
I have Cleared the cache, and wiped dalvik code, fixed permissions.....
I'm very familiar with the VIBRANTS, not the cappy's so this is a challenge to me.
my Vibrant has connected with all the usb drivers from samsung, but the cappy cannot. I've even downloaded the drivers for just the CAPPY, uninstalled all others, and Still not recognized, yet my vibrant does?
i've installed i think every driver on here for captivates, kies downloads, even went to the samsung website and Downloaded from there.
STILL NOT CONNECTING.
Even DL'd the AIO cappy toolbox (very nice to have for my VIBRANT)
Still no avail.
all my drivers are correct for the 32 bit vista OS. even tried on my GF's 64 Windows 7.
Still no avail.
I've installed the drivers with the phone in DOWNLOAD mode even, still not connecting.
Rebooted the computer after removing and also reinstalling drivers.
Changed between 3 diff cords, all work for my VIBRANT,
still no avail.
Any idea's would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
First, see if you can find out which version of Cognition she was running (Gingerbread- or Froyo-based).
Once you have that information, I believe you should be able to download the appropriate ROM on you computer and copy it to the microSD card (adapter or whatever method you need to do to get it there). Since you can get into CWM recovery, you could try flashing the ROM from there. Assuming it's a full wipe rom (and you're not concerned about keeping apps installed on the phone), it should reset things to a more workable state. (If you are worried about apps remaining... I don't know what to say at this point, since you can't get to Tibu.)
If that doesn't work, you could try the one-click back to stock (realizing that you're having connectivity issues, I'll get to that in a second).
When you connect the phone in download mode to ODIN, does the yellow COM:# show up?
If you have tried ODIN on your Vista computer, try running ODIN as Administrator.
I've had some luck in the past getting the phone to be recognized (assuming Froyo) by doing this:
1. With nothing connected to computer, start ODIN (one-click to stock would be good).
2. Pull battery on phone.
3. Reinsert battery, but do not power on.
4. Hold Vol+/Vol-/, and insert USB cable.
5. Wait for it to kick into download mode, release buttons, and wait again.
6. See if ODIN recognizes it.

jmtheiss said:
First, see if you can find out which version of Cognition she was running (Gingerbread- or Froyo-based).
Once you have that information, I believe you should be able to download the appropriate ROM on you computer and copy it to the microSD card (adapter or whatever method you need to do to get it there). Since you can get into CWM recovery, you could try flashing the ROM from there. Assuming it's a full wipe rom (and you're not concerned about keeping apps installed on the phone), it should reset things to a more workable state. (If you are worried about apps remaining... I don't know what to say at this point, since you can't get to Tibu.)
If that doesn't work, you could try the one-click back to stock (realizing that you're having connectivity issues, I'll get to that in a second).
When you connect the phone in download mode to ODIN, does the yellow COM:# show up?
If you have tried ODIN on your Vista computer, try running ODIN as Administrator.
I've had some luck in the past getting the phone to be recognized (assuming Froyo) by doing this:
1. With nothing connected to computer, start ODIN (one-click to stock would be good).
2. Pull battery on phone.
3. Reinsert battery, but do not power on.
4. Hold Vol+/Vol-/, and insert USB cable.
5. Wait for it to kick into download mode, release buttons, and wait again.
6. See if ODIN recognizes it.
Click to expand...
Click to collapse
Thats my problem, the cappy does not see that there's an EX SD card there at all? says no files, but i've tried to push a cognition rom to the EX SD and use CWM to flash it to get it to boot, but the phone cannot see that there's an EX SD, but the SD card is fine, even my vibrant used it..
ODIN as ADMIN? tried that and nothing, still no yellow com port,
i know how to use odin, as my VIBE has been "Bricked" a few times lol
the vol up/down button combo does nothing, just shows up as a charging screen, the only way i can get the phone to download mode is through CWM.
the phone is running a FROYO based cognition ROM. or that's what her bf put on there.

This may sound stupid and simple but is the device set on mass storage from the settings menu? If you know.
Also have you tried mounting your sd cards in CWM?

Rhiannon224 said:
This may sound stupid and simple but is the device set on mass storage from the settings menu? If you know.
Also have you tried mounting your sd cards in CWM?
Click to expand...
Click to collapse
lol THATS MY PROBLEM> the phone thinks it boots normally, but i cannot get the settings menu. like the "SETTINGS APK" file was deleted when she formatted the SD!
but i was just playing around and i got google voice search to pop up!
then from there i used my WIFI and setup the google settings, then i went to the market grabbed CWM and used the cognition rom i've already downloaded, and used it!
then the GREEN CWM booted, and it still cannot MOUNT EX SD card. so the flash failed.. HMMMMMM
As of now i am gonna go into the rom i DLed (cognition) and try to DL Root explorer and hard push the Settings.apk file to the system. HOPEFULLY from there i can get my settings back to restore the phone.

Realizing that it's a long shot at best due to connectivity issues, have you tried using ADB?
If so, you could push the ROM you need to the internal SD.

so, used root explorer to move the NEW cognition froyo rom from the EXternal SD to the INTERNAL SD. from there i used CWM recovery to flash the rom, the rom flash was successful, but now the phone is stuck in bootloop on the AT&T world phone screen.
and CWM will not LOAD. FML
Looks like i'm gonna have to take this apart and get to the internal SD card. =/

Can you get to CWM with the Vol+/Vol-/Power combo - hold those past one AT&T screen and when you see the second one, let go?

Adb was not an option at that point, the phone couldn't recognize it even had a phone attached to it.
but now that i'm stuck in bootloop and with no CWM recovery OR DL MODE, yeah the jig isnt' workin... HAHA
i guess its just a paperweight now.. Owell, i tried.

i held it for about 3 mins... lol and the jig i got for my VIBRANT isn't workin either. I didnt know these phone's can lose the 3 button combo reset? i often flash I9000 roms to my vibe, thats why i have a jig, but i didnt think cappy's would do that unless i flashed an i9000 rom to it? lol

Just because I'm not sure if you tried it - have you tried plugging the cable into a different port on your computer? If it's not one directly connected to the motherboard, that can sometimes cause problems getting the phone to be recognized.
Also - does the phone show any signs of recognizing there is a cable inserted (like charging)?

tried every port. No the phone only acts as if it wants to display the batt charging symbol, but does not show, I cant believe it, i actually think i bricked a galaxy s.. haha

Another long shot, but you could try the One-click unbrick. Since it's Heimdall-based, there's always a chance.

Wow, didnt know that even existed. Definately gonna be useful for my Vibrant, haha i'll give it a shot.. THANKS, i'll report back after i try it.

I hope it does something. With the connectivity issues you're seeing it's starting to sound a little like hardware issues.
I'm going to throw out a checklist of stuff, knowing that you are already experienced with ODIN and ROM flashing, simply because I know I usually can use some sort of checklist to make sure I've caught everything.
- Redownloading/reinstalling drivers, rebooting before connecting phone
- Redownloading/reinstalling ODIN package
- Redownloading ROM to flash
- Hold V+/V-, inserting USB cable
- Remove battery, hold V+/V-, insert USB, insert battery
- Hold V+/V-/HOME softkey
- Hold V+/V-/HOME/Power
- If download mode reached, allowing phone to sit connected for long time
- If download mode reached, connecting phone after opening ODIN
- If download mode reached, connecting phone before opening ODIN
- If download mode reached, connecting phone after ODIN, disconnecting, reconnecting phone
That's all I can think of for a checklist of stuff to try/retry.

I appreciate the help but i've tried all of those options several times, The jig did work to get it into DL mode, but from there i'm still in the same **** position, my computer will not recognize that the phone is connected.
Is it possible that the phone somehow lost its drivers? what i mean by that is, the phone acts different with different USB ports, completely.
On one port it says unknown device, another USB android composite device.
Its as if the phone's changing as i change ports. Very FRUSTRATING!
i think it could be a hardware issue myself, but how could a corrupt drive work so well? To the T every time i've used the jig DL mode fired up, but my computer still cannot find the drivers to run it. Hell i've even tried using winusb drivers package to force install the phone, still no avail.
Like i said, I really appreciate the input, I figured if i couldnt figure it out, someone on here had some EXP in doing this lol i've just never had a driver problem give me so much trouble. IDK, bout ready to turn this paper weight into a pile of ash.

If you can get into cwm, have you tried doing another hard reset/factory wipe?

Thats the problem, earlier i COULD get into CWM, and hell i flashed the new rom perfectly!
now it is stuck bootlooping, therefore i just used the Jig, and first few times it didnt work, now its stuck bootlooping, download mode is attainable, and still NOT connecting to my pc via usb.

mrhaley30705 said:
If you can get into cwm, have you tried doing another hard reset/factory wipe?
Click to expand...
Click to collapse
Nvm, reread your post. Have you tried flashing a different rom?

PelvicThunder said:
Thats the problem, earlier i COULD get into CWM, and hell i flashed the new rom perfectly!
now it is stuck bootlooping, therefore i just used the Jig, and first few times it didnt work, now its stuck bootlooping, download mode is attainable, and still NOT connecting to my pc via usb.
Click to expand...
Click to collapse
Try a different computer? also, which version o of odin are you using? I've found 1.3 & 1.82 to work best.

All gone wrong.

Something really gone wrong for me here and have a feeling I have a brick.
1. Flashed ROCKET ROM-V19-XXLA4 from external sd using CWM.
2. Flash was confirmed rebooted.
3. Got Bootloop (Rocket Logo)
4. Could boot into download mode but PC not seeing device.
5. Removed battery for over 1 min.
6. Still no difference, the device just cant be seen. Even after reinstalling the drivers. via Kies trouble shooting.
Anyone have any ideas??

exceluk1 said:
Something really gone wrong for me here and have a feeling I have a brick.
1. Flashed ROCKET ROM-V19-XXLA4 from external sd using CWM.
2. Flash was confirmed rebooted.
3. Got Bootloop (Rocket Logo)
4. Could boot into download mode but PC not seeing device.
5. Removed battery for over 1 min.
6. Still no difference, the device just cant be seen. Even after reinstalling the drivers. via Kies trouble shooting.
Anyone have any ideas??
Click to expand...
Click to collapse
Did you follow hus advuce to a t.
Did you have a backup
Can yiuget into recovery via vol up.home.power if si restore last working config.
Failing that its odin and stock rom
Its virtually impossible to brick a samsung phone yesvit can occur but v v unlikely
Sent from my GT-N7000 using xda premium

I can boot into "Odin Mode" but the device is just not responding via USB.
I do have a backup on an external device but without being able to boot into CWM or My laptop to recognise the device im stuck.....

exceluk1 said:
I can boot into "Odin Mode" but the device is just not responding via USB.
I do have a backup on an external device but without being able to boot into CWM or My laptop to recognise the device im stuck.....
Click to expand...
Click to collapse
So if you open odin on pc making sure kies is closed fully inc tray icon and then plug the phone in it does not show in odin as ready ir cinnected
Sent from my GT-N7000 using xda premium

I had the same problem today, but it worked when i did this:
- Volume down + Home + Power
- Do not press continue yet
- Open Odin
- Connect it to the computer
- Choose Continue on the Note
Now the computer should install two new drivers (modem and another one), and then the phone will pop up on the computer.

Odin is seeing :- 0:[COM4]
Thanks so much really thought I'd bricked it. Forgot all about Odin A Beer and a thanks to you both.
Just a note, not sure what went wrong but I had to flash a full stock ROM including the Modem, Code and Multi to get it working again.

exceluk1 said:
Odin is seeing :- 0:[COM4]
Thanks so much really thought I'd bricked it. Forgot all about Odin A Beer and a thanks to you both.
Just a note, not sure what went wrong but I had to flash a full stock ROM including the Modem, Code and Multi to get it working again.
Click to expand...
Click to collapse
Well least ya back up and running thats all that matters.
I can now sleep Didnt want to leave ya hanging lol
We have all had that scare moment when it goes wrong but so sweet when she boots up again
Sent from my GT-N7000 using xda premium

2nd attempt took all of 5 - 6 mins with no issues at all

[Q] Is my phone brricked?

Sorry if this is a easy question but i am a huge noob at this stuff. (im only a teen)
well recently i tried installing CWM recovery with Odin and now my phone wont turn on. All it does is show a handset, then a few dots, then a warning sign, then a computer. I cant go into recovery mode download mode or anything
if it isn't bricked then what is happening
can anyone plz explain and give a solution
i have a rooted Samsung captivate i897
it looks something like this
i.imgur.com/XKRFO.png

Jack Jake said:
Sorry if this is a easy question but i am a huge noob at this stuff. (im only a teen)
well recently i tried installing CWM recovery with Odin and now my phone wont turn on. All it does is show a handset, then a few dots, then a warning sign, then a computer. I cant go into recovery mode download mode or anything
if it isn't bricked then what is happening
can anyone plz explain and give a solution
i have a rooted Samsung captivate i897
Click to expand...
Click to collapse
you are still in download mode without a ROM, so Flash the correct ROM package for your model , use i897 WIKI
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu>Settings>Applications>Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3

Your phone is not bricked. You should be able to bring it back. Easiest method to get out of this is to use heimdall one click unbrick which will fix this error and put your phone in download mode.
Sent from my SGH-I897 using xda app-developers app

Jack Jake said:
Sorry if this is a easy question but i am a huge noob at this stuff. (im only a teen)
well recently i tried installing CWM recovery with Odin and now my phone wont turn on. All it does is show a handset, then a few dots, then a warning sign, then a computer. I cant go into recovery mode download mode or anything
if it isn't bricked then what is happening
can anyone plz explain and give a solution
i have a rooted Samsung captivate i897
it looks something like this
i.imgur.com/XKRFO.png
Click to expand...
Click to collapse
you just need odin the screen is telling you to plug it into the computer its in download mode. odin one click is the easiest way i have found to fix it if you dont know entirely what to do. the instructions should be on the forum page with the download link for it

That phone hard bricked? Only Emergency Dload Mode works!

Hey guys.
I got here a Samsung Galaxy Ace S5830 (without i) and this phone doesn't turn on. Sometimes I'm getting into the "Emergency dload mode" but the usual download mode or recovery doesn't work. In december 2012 i flashed CM7 on this phone, after that I did nothing which could brick the phone. If I'm trying to plug it into my computer to odin that device the computer doesn't recognize the phone ("USB-Device not recognized", so it's not a driver problem, the whole device isn't recognized). If I turn the phone into that emergency dload mode by pressing volume+home+power this mode disappears after a few seconds, sometimes after 3, sometimes after 6, sometimes after 10 seconds. Can it be the battery? I already charged the phone half an hour. Do you think I can reanimate that phone? Or you think i need to jtag it?
Thanks in advance for any help!

Hi skayable,
You could read this hubix's tutorial http://forum.xda-developers.com/showthread.php?t=1034145
Good luck.
Sent from my GT-S5830 with AceOne 2.1

But my Problem is that neither Odin nor my Computer recognizes the phone. I am not getting into download mode. Only in the emergency download mode which is not flashable with Odin.
But thanks anyway. I think that phone is dead.
Sent from my Desire HD using xda app-developers app

skayable said:
But my Problem is that neither Odin nor my Computer recognizes the phone. I am not getting into download mode. Only in the emergency download mode which is not flashable with Odin.
But thanks anyway. I think that phone is dead.
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
Hi skayable,
You could try installing the drivers, again, just in case.
Good luck.
Sent from my GT-S5830 with AceOne 2.1

Did you take the battery out before pressing all the buttons? I've bricked mine a few times now (noob) and have managed to get a connection with Odin each time. Sometimes takes a few attempts, poss to do with my hands being too small to hold all buttons and put battery back in. One time, Odin took several minutes to find the device.
It's probably not a good idea to be using a flat battery. And do try re-installing the Windows standard drivers. Don't give up! If a noob can do it ...

So I sent that phone in service. They said, that the software was modified and the warranty is void. I said, they shouldn't repair it and send it right back. When I got the phone back, it worked! They flashed a new bootloader, found out that it's rooted and sent me back. Good method to get it repaired
That's so funny.

Help with my galaxy ace bricked
Hi guys, im using a rooted 2.3.6, then i did the partition for link2sd, and everything worked perfect, however since i downloaded some apps first before doing the partition, i decided to do factory settings on the phone settings so it would be like a fresh internal memory then begin downloading when link2sd is already placed, however after doing factory reset on settings, my phone just keep on rebooting, everytime i open it, i downloaded the firmware in sammobile, as per advised, however im not sure how to flash it. should i use ODIN, or use CWM and do this process.
Using CWM.
Copy Zip to SD Card
Reboot into recovery
Wipe Data/Factory Reset
Wipe Cache Partition
Install Zip From SD Card
Flash ROM
Reboot
or should i follow this instruction via odin
http://www.droidacid.com/how-to-flash-official-firmware-on-galaxy-ace-gt-s5830-using-odin-droidacid/
Thanks,, kindly reply to this, need help badly.

jhay0017 said:
Hi guys, im using a rooted 2.3.6, then i did the partition for link2sd, and everything worked perfect, however since i downloaded some apps first before doing the partition, i decided to do factory settings on the phone settings so it would be like a fresh internal memory then begin downloading when link2sd is already placed, however after doing factory reset on settings, my phone just keep on rebooting, everytime i open it, i downloaded the firmware in sammobile, as per advised, however im not sure how to flash it. should i use ODIN, or use CWM and do this process.
Using CWM.
Copy Zip to SD Card
Reboot into recovery
Wipe Data/Factory Reset
Wipe Cache Partition
Install Zip From SD Card
Flash ROM
Reboot
or should i follow this instruction via odin
http://www.droidacid.com/how-to-flash-official-firmware-on-galaxy-ace-gt-s5830-using-odin-droidacid/
Thanks,, kindly reply to this, need help badly.
Click to expand...
Click to collapse
In case of bootloop use odin and flash a stock rom.

Galaxy Ace 2 18160
Hi,
My son had this phone and rooted it, bricked it and dumped it. I would like to see if I can make it work again. It is hard bricked so the three button combo doesn't work. Can this be phone get working again?

[Q] Galaxy SIII I9305. Not start anymore.

Hi! About two weeks ago my phone did not recognize my SIM card. Phone is rooted of course. So I restore my org ROM and sometimes my SIM vas recognized and sometimes not. I decidet to buy a new SIM and SD card reader. After replacing it problem did not go away, so I start diging depper and I found it that my IMEI is null/null. For last week I was trying to do every tutorial, guide and other things on net and of course this great forum to fix it. No luck unfortunatly. Today when I hold HOME+VOL BUTTON+POWER trying to connect in odin mode, here come the wierd thing phone was enter some kind of SDCARD MODE and copy some thing from SD card, there was about four rows of text something like SDCARD MODE, COPYING (I do not know what) FROM SDCARD, COPY FROM SD CARD COMPLETE, (I do no know what). Then phone turned off and do not power up anymore. I was tryin to remove battery. Phone was connected to computer while this wierd thing happen. Have anybody an idea of what happend?
Sorry for my english.
fr!Xy, Regards from Slovenia

fr!Xy said:
Hi! About two weeks ago my phone did not recognize my SIM card. Phone is rooted of course. So I restore my org ROM and sometimes my SIM vas recognized and sometimes not. I decidet to buy a new SIM and SD card reader. After replacing it problem did not go away, so I start diging depper and I found it that my IMEI is null/null. For last week I was trying to do every tutorial, guide and other things on net and of course this great forum to fix it. No luck unfortunatly. Today when I hold HOME+VOL BUTTON+POWER trying to connect in odin mode, here come the wierd thing phone was enter some kind of SDCARD MODE and copy some thing from SD card, there was about four rows of text something like SDCARD MODE, COPYING (I do not know what) FROM SDCARD, COPY FROM SD CARD COMPLETE, (I do no know what). Then phone turned off and do not power up anymore. I was tryin to remove battery. Phone was connected to computer while this wierd thing happen. Have anybody an idea of what happend?
Sorry for my english.
fr!Xy, Regards from Slovenia
Click to expand...
Click to collapse
Recovering IMEI And Data Connection
•Make sure you have Samsung Kies or the Samsung USB Driver installed on your PC.
•Download and Extract: Odin3 3.04.zip - 457.11 KB to your PC if you don't already have it.
•Download and Extract: Param_Bin_I9305.zip - 612.14 KB to your PC. http://d-h.st/Fhb
•With your Phone Switched Off, press and hold: 'VOL DN' + 'HOME' + 'POWER' to enter Download Mode.
•Connect your phone to your PC via USB Cable and start Odin.
•Check your phone is connected by seeing if a COM Port in a Blue box is present under ID:COM.
•Press the 'PDA' Button and select the 'Param_Bin_I9305.tar.md5' file you extracted from the Zip Archive earlier.
•Press the 'Start' Button and wait for it to finish flashing. If successful, you will see a Green Box with 'PASS!'.
•Wait for your phone to reboot then go to your Dialer and press: *#06#. You should now see your IMEI and your Data Connection will be back

Thanks for your help. I tried this for 10 times but no help. But at the moment my phone doesent even power on so I cannot enter odin mode or do anything on it.

Do maybe someone know solution for my problem!?

ensure that the battery is not drained,flash costs much~
you should verify whether the forementioned method have been finished correctly.
method of the guy upstairs has a base,if you didnt achieve,it will not work.
it is the drivers installed in first step, that makes your dead phone recognized in fastboot mode,way to check whether it installed well is the blue(green?) box in the sixth step,if you didn't see it,proved that what you were doing was nonsense.
All above has been done and still can't start,well,
Sent from my GT-I93

SD card mode copy's everything from the sd card to the bootloader or the emmc.. Not sure which one.. But it renders it complete hard brick (not able to turn on at all)
Sent from my GT-I9305 using xda app-developers app

So. Is there any hope for my phone? Or mybe I try to send it to service? If its hard bricked they will not reciognize that phone was rooted and have lost IMEI... Is that right? Or will they see that phone was rooted etc?

fr!Xy said:
So. Is there any hope for my phone? Or mybe I try to send it to service? If its hard bricked they will not reciognize that phone was rooted and have lost IMEI... Is that right? Or will they see that phone was rooted etc?
Click to expand...
Click to collapse
Send it in, you have nothing to lose

OK! I will let you know when phone arives.

sd card mode
After flashing my gt-i9305 from CM 10.1 to Liquid Smooth (Liquid Smooth worked great) and after another reboot, my Phone turned into "sd card mode" or something, and now, i can´t boot to Liquid Smooth, Cwm, Bootloader ,Fastboot, the Led doesn´t work, no usb connection (Odin)!
Today i builded a Usb Jig... on my S2 the Jig was working very well, but on my S3... nothing !
how could this happen? I've followed the instructions, and it was not the first time I've flashed a custom Rom!
Thanks for any support!

fr!Xy said:
OK! I will let you know when phone arives.
Click to expand...
Click to collapse
Your S3 lte basband chip need replacement.
Sent from my GT-N5100 using xda app-developers app

Do anyone know if this can hlep?
HTML:
http://www.ebay.com/itm/USB-Jig-Dongle-For-Samsung-Galaxy-S-III-S3-GT-I9305-LTE-Download-Mode-unbrick-/251386220228?pt=US_Other_Cell_Phone_Accessories&hash=item3a87c94ec4

Usb Jig has only one function on SGS3 and that is to get to download mode where three button cannot .