done it - all working fine wonderful......
but right hand side buttons not functioning i.e. play, stop, skip....
any ideas?????
8)
Got working too but treble spikes
I got my Qtek 2020i to work with the HT820 headset both with calls and music but with the music the treble spikes.it can be a lil anoying especially with a song that uses drummer playing on the metal disc(not sure wat it called) I tried a mp3 192kbps and still u can hear it. any suggestions. I downloaded a cab file to get the music working is there any other cab or file i could try?
So, is there an update to this? i.e. Play / Skip Buttons?
I seem to have the same problem and wondered if anyone has sorted it yet?
Cheers
Just use TCPMP(www.corecodec.com, www.tcpmp.org) player and turn on Broadcom Button support in adv. options.
I am using my headphones with full button support.
Just use TCPMP(www.corecodec.com, www.tcpmp.org) player and turn on Broadcom Button support in adv. options.
I am using my headphones with full button support.
Cool Installed it works like a dream mose of the time,
But do get some drops where the Audio descdides to stop going throught he HT820 and through the normall speakers?
Simply incerase file cache from Automatic to 2048Kb and your system will be much faster. Also, it will solve problem with incorrect sound routing(bluetooth sound transfer occupies anout 40% of cpu time sometimes, including MP3 decodning).
Sorry dumb question but where do I find that setting?
I can see Options > Settings > Select Page > Buffering > Normal BUffer Size is set to 2400KB already?
Cheers
Ok an Update now, I had 0.72 RC 1 installed so thought I'd go back a version to 0.71.
THe same settings are there and changed, Now if I get a call, answer with left button, put down with left button the audio gateway goes. the right hand side still works but no audio to the headphones, only way is to disconnect bluetooth connection and reconnect.
Very Strange. I wonder if we will ever get this to work as it should lol,
Re: Got working too but treble spikes
Robert6 said:
I got my Qtek 2020i to work with the HT820 headset both with calls and music but with the music the treble spikes.it can be a lil anoying especially with a song that uses drummer playing on the metal disc(not sure wat it called) I tried a mp3 192kbps and still u can hear it. any suggestions. I downloaded a cab file to get the music working is there any other cab or file i could try?
Click to expand...
Click to collapse
If you mean spikes as in distortion in the sound, that's most probably because your sound level is too high. Turn down the volume of your headset, and it'll sound fine. I experience this problem if I turn my headset up too high, it's a design flaw (in my humble opinion) of many bluetooth headset devices, but unfortunately it's quite common.
BA WM5 Broadcom 1.7.1 Build 3400 Stack (Test)
This is just some test of mine to hv option with BT stack (MS/Broadcom), I only spend the last 3 hour workin on this little project, so it really possible if anything is missing or I forgotin something (its happens to me right?..lol), but I've test it and it work like it should (With My v1.3 ROM), I dont know if this test hv a bug. maybe we can test it, especially A2DP and stabilty issues with this test.
Tested operation:
1. Activesync
2. Send/Recieve File
3. Headset via computer
4. Network Access
5. BT Serial Port
6. Dial-up Networking
Known Issue:
U tell me, not tested so much.
Instalation:
1. Install the HELMI_BA_WM5_BT1.7_TEST.CAB then soft reset
Uninstall (note the step its really neccesary, or u'll endup mess with ur phone):
1. Install Enable_MS_BT_.CAB
2. Delete registry value (or the folder)
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM]
and delete "Redirect" key on:
[HKEY_LOCAL_MACHINE\ControlPanel\Bluetooth]
"Redirect"="BTConnManagerCE.exe"
3. Reset
4. Uninstall HELMI_BA_WM5_BT1.7_TEST.
5. Delete file from \Temp dir
EDIT:
I forgot to mention, after u run ENABLE_MS_BT.CAB the Broadcomm/Widcomm file will be move to \Temp folder so u can delete it safely...
Dont expect to be perfect on this release, cos its only on earlier stage, to early, hopes someone might help for improvement, and workin together with me, and I hopes some1 can make a better Install/Uninstall process.
Dont install/try if u dont know what ur doin, and backup your data is a must.
Input is always welcome. cos I believe there's still much things to do.
Thanks for http://www.aximsite.com site and everybody there for the BT file.
http://www.aximsite.com/boards/showthread.php?t=122247
and also thanks -=xXx=- for the info where to find it. thanks man.
Helmi
gonna test it now helmi_c
thanks
Just intalled. The stereo works fine! Great quality for me! The hands free seems to be a bit tempremental. Worked once and then stopped afet receiving one call.. WIll try it out again..It looks like am stuck with an either. One observation: with the ms stack, there was a headphoen icon while using the phone. is absent here...wonder if that was a ms stack function?
deepak
helmi_c,
hmm weird, after i installed the new wildcom stack, my pda cant see my headset anymore.
still testing though.
wish me luck.
imatrix
I believe u guys both hv problem with MS Stack, hopes this stack will help for who having problem with MS Stack, but remember this is just some sort test, maybe still need a lot of improvement. but its seems work good with deepakr who hv problem with MS, imatrix hopes u'll hv the same result like he does. good luck.
btw In the rar there's a BTspeed cab, it might help for some headset, post on the Axim forum sites... there's also another app for controlin power if i'm not mistaken, I'll post when i get back.
A little note, this stack sometimes wakeup if gsm signal is lost/found, if the signal of gsm is good, it shouldnt happen (theoriticaly speaking..lol..).
helmi_c
Firstly great to see BT restarting automatically after handset is switched on from standby mode. After some fooling around I was able to set up activesync and it worked like a charm (useful for me especially since USB activesync does not work)
Couple of problems I faced
1. Turning off and restarting BT gave me a unable to load driver due to insufficient memory error. When I stopped my activesync, outlook and contacts and tried again it started successfully.
2. I was unable to find the DUN service and my PC did not recognize a DUN service either - am I looking/not looking at the right place?
Thanks and highly appreciate your prolific contribution
-AKC
Hi Hemli
I have just installed this a minute ago,
Ill report back in a few hours with my experiances with this.
Hopefully it will be better than M$ BT stack with stereo headsets.
I've upload a patch that contain a newer BTCeIf.dll (1.7 the original was 1.6) and HTC_PCM_Routing.dll taken from htc device. well... in my device I dont hv problem with memory issues, even without this patch.. I dont know for sure, cos i dont test it much...currently test workin Simultaniously is BTSYnc, SerialPort 1 in 1 out, and Audio Gateway. and its still work fine.
btw please post comment here, and also what rom u currently use. Otw now, just come to trow the patch..
bro helmi,
Sorry if i asking you stupid question.
Can this file install/working with WM2003SE ?
THX
hi..
hi have instal this, and find some issues
1- if i turn on bt the wifi dont work..
2- if i turn on wifi, the bt give the memory error
afther use 1 off the things (bt our wifi) need a soft reset to work the other
Riddler said:
bro helmi,
Sorry if i asking you stupid question.
Can this file install/working with WM2003SE ?
THX
Click to expand...
Click to collapse
No, it does not work on WM2003SE, I installed it and I had to hard re-set my Imate, it works only under Wondows 2005!!
Any way I gave it a try and I had to hard reset my PDA any way!!
Helmi, I just wanted to confirm, that Dial-Up with 2nd phone works fine. Tested also BT stereo headphones from HP (A2DP with additional profile for controlling playing - skipping to the next track and pause) - So far works as only BT implementation in BA allows: on close distance and not doing much in backgroud works fine.
Another happy user of your Firmware and other tools for BA!
Later on I will test GPS on BT, but do not expect any problems.
One small detail is left from old BT stack: while creating a connection you can still choose connection using "Bluetooth" that refers to M$ stack (selecting it reports hardware error - not rreally suprising
helmi_c said:
I've upload a patch that contain a newer BTCeIf.dll (1.7 the original was 1.6) and HTC_PCM_Routing.dll taken from htc device. well... in my device I dont hv problem with memory issues, even without this patch.. I dont know for sure, cos i dont test it much...currently test workin Simultaniously is BTSYnc, SerialPort 1 in 1 out, and Audio Gateway. and its still work fine.
btw please post comment here, and also what rom u currently use. Otw now, just come to trow the patch..
Click to expand...
Click to collapse
Aha! The patch helped! I now have a fully functional headset, stereo on the headphones and a great speedy and stable ROM. Makes me one happy camper. Looks like now I can go ahead and finally configure this with all my apps. Thanks helmi
NO HANDSFREE PROFILE
Hi
nice integration and thanks but i went back to ms as my sony ericson hcb-700 wll not pair for some reason after looks like the handsfree profile is not working
The Audio stream is great with this BT solution !
But when I connect to my parrot ck3300 carkit, It opens the connection like there is a tel.call active. when i press the hangup button on my carkit the BT connection is gone.
So it seems it is connected as headset and not as handsfree phone,
One other thing, when I connect to my BT Sony Ericsson HbH ds970 stereo headset I cannot shut off the screen in tcpmp player ???
(I think this also happened with th MS stack)
any solution for this ?
Last test (with my clean AKU3.2 v1.3) with BroadcommPatch1 applied and no overclock:
Turn on/off 4 times and reconnect below service (get bored to turn on/off and play with it again):
currently active BT service at the same time is:
1. Activesync / Bluetooth serial Out (syncing)
2. Network Acces/ Bluetooth Networking
3. Audio Gateway / Calling my mobile operator and stream audio to my pc as headset
4. Send/Recieve file from pc and from pda
5. Bluetooth serial In
and currently active application (leave as background procces I dont close it):
1. Activesync (Syncing)
2. Calendar
3. Contact (580 contact display)
4. Excel Mobile opening 185kb file
5. Album
6. Word Mobile opening 220kb file (little bit slow on opening)
7. Powerpoint Mobile opening 350kb file till end slide
8. Notes
9. Task
10. Bluetooth Manager
11. File Explorer
12. Calculator.
lastly...activate Wifi...wifi detecting & connect to neighbor network... turn off wifi...activated again...detecting & connect to neighbor network again...
but I dont test the GPS (serial port) or A2DP stuff since i dont hv it.
turn off bt...turn on again...reconnect the above BT service...do this 4 times.. still no memory issues. well maybe I'm just bein lucky... but the battery is drain more faster with this test, maybe because this is somekind of stress testing.
so far this Broadcomm stack still running well...the sound from Audiogateway while this test active is still ok, but if the gsm signal is bad, the sound is bad also, so its not bt problem its a gsm problem. btw the ShutXP Icon on the tray is GONE..thats weird.., that the only issue I hv..
btw does anyone know where to find a PC Widcomm/Broadcomm driver that support A2DP, I dont remember where to find it. My PC Widcomm driver version is v1.4.2 Build 12, quite old, I want to test the a2dp profile.
btw if u play with:
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugin\HandsFree]
"SupportedFeatures"=dword:37 (default doesnt exist)
"ServiceMask"=dword:1
"AudioSetupDll"="\windows\HTC_PCM_Routing.dll" (default MkSpk_PCM_Routing.dll need to play with this and see what more widely support device)
"AudioPreferences"=dword:2
"AudioHandling"=dword:13 (default 8 )
there's a Icon if headset is activated. but its seems unstable in my device, try it.
bigsteve said:
Hi Hemli
I have just installed this a minute ago,
Ill report back in a few hours with my experiances with this.
Hopefully it will be better than M$ BT stack with stereo headsets.
Click to expand...
Click to collapse
Waitin for ur input...
jakubd said:
Helmi, I just wanted to confirm, that Dial-Up with 2nd phone works fine. Tested also BT stereo headphones from HP (A2DP with additional profile for controlling playing - skipping to the next track and pause) - So far works as only BT implementation in BA allows: on close distance and not doing much in backgroud works fine.
Another happy user of your Firmware and other tools for BA!
Later on I will test GPS on BT, but do not expect any problems.
One small detail is left from old BT stack: while creating a connection you can still choose connection using "Bluetooth" that refers to M$ stack (selecting it reports hardware error - not rreally suprising
Click to expand...
Click to collapse
oops... well, maybe its a little bit tricky to strip out completely the old stack, but I'll try learn this... or any input is more then welcome
deepakr said:
Aha! The patch helped! I now have a fully functional headset, stereo on the headphones and a great speedy and stable ROM. Makes me one happy camper. Looks like now I can go ahead and finally configure this with all my apps. Thanks helmi
Click to expand...
Click to collapse
Good to hear that deepakr, Btw I imatrix what u status man? is it workin with u (the patch)? if u still hv a static noise issues, try to delete the shortcut on the BTManager and re-create the Audiogateway Shortcut.
hey helmi_c,
Good to hear that deepakr, Btw I imatrix what u status man? is it workin with u (the patch)? if u still hv a static noise issues, try to delete the shortcut on the BTManager and re-create the Audiogateway Shortcut
Click to expand...
Click to collapse
yep still have the static noise, will try your method later.
been bz this few days, i did not test much. I will play around with it tomorrow.
thanks.
imatrix
Thanks Helmi, great job!
A2DP works nicely, but now i get the same opposite as compared to microsoft stack. my A2DP is perfect whereas any calls that come in ring through the hedset, but i can't pick the calls up / talk through the bluetooth headset. weird uh?
Anyone hit the same problem?
I have no problems with static, just some slowdowns due to processor usage and i can't toggle the screen in WM or using display switch.
Great Job though!
edit:
maybe its because i'm connected as both headset and high quality audio? going to try connect as hands free and HQA.
edit 2:
can't for the life of me find out how to pair it in handsfree mode! Any pointers?
(on OrDroid ROM base 4.2.2) Any idea why I cannot select phone audio profile in Bluetooth settings, I can only select media audio?
Trying to connect my phone to the car for phonecalls etc but cannot select phone audio option only media audio?? Does one maybe need some (or all) of the automotive apk's to use Bluetooth in the car for calls. I deleted them from the ROM so maybe that's what the problem is, really not sure, thanks
Seems that the bluetooth stack changed from JB 4.1 to 4.2, and this is causing some issues, has anyone got an older Bluetooth apk (4.0 or 4.1) thanks
Since I can't post directly to the ROM thread, thought I'd post here.
Installed the ROM and the ringtone audio fix. All is working swimmingly on the device.
Re-paired the phone to my JVC head unit in my car. When playing back audio via Bluetooth, any audio streams are playing back at what seems to be 1/2 the frequency, therefore the pitch is shifted upwards- basically a chipmunk effect. This is happening with ANY audio stream to the head unit- music, TTS output, google maps voice prompts, video playback.
I deleted and re-paired devices. Wiped Dalvik cache and the cache mount. Still the same problem.
Any ideas? Is this a generic cyanogenmod bug that crops up? No problems like this with CyanVivo 10.1 4.2.2.
Thanks!
virgilr said:
Since I can't post directly to the ROM thread, thought I'd post here.
Installed the ROM and the ringtone audio fix. All is working swimmingly on the device.
Re-paired the phone to my JVC head unit in my car. When playing back audio via Bluetooth, any audio streams are playing back at what seems to be 1/2 the frequency, therefore the pitch is shifted upwards- basically a chipmunk effect. This is happening with ANY audio stream to the head unit- music, TTS output, google maps voice prompts, video playback.
I deleted and re-paired devices. Wiped Dalvik cache and the cache mount. Still the same problem.
Any ideas? Is this a generic cyanogenmod bug that crops up? No problems like this with CyanVivo 10.1 4.2.2.
Thanks!
Click to expand...
Click to collapse
Hi!
My fault probably, will be corrected out today.
Sent from my hTC Sensation Z710e with Sense 4+
virgilr said:
Since I can't post directly to the ROM thread, thought I'd post here.
Installed the ROM and the ringtone audio fix. All is working swimmingly on the device.
Re-paired the phone to my JVC head unit in my car. When playing back audio via Bluetooth, any audio streams are playing back at what seems to be 1/2 the frequency, therefore the pitch is shifted upwards- basically a chipmunk effect. This is happening with ANY audio stream to the head unit- music, TTS output, google maps voice prompts, video playback.
I deleted and re-paired devices. Wiped Dalvik cache and the cache mount. Still the same problem.
Any ideas? Is this a generic cyanogenmod bug that crops up? No problems like this with CyanVivo 10.1 4.2.2.
Thanks!
Click to expand...
Click to collapse
It's caused by audio fix. You can replace audio.a2dp.default.so with the one from Stable #4 and you'll have correct audio playback back =)
TheQwertiest said:
It's caused by audio fix. You can replace audio.a2dp.default.so with the one from Stable #4 and you'll have correct audio playback back =)
Click to expand...
Click to collapse
A huge thanks to you both- I've done the replace, haven't tested it yet but hopefully this'll do it!
UPDATE - tested and working as normal after replacing the file mentioned by theQwertiest- thanks again!
Hello World
Hi, guys.
Saw this post about bluetooth in CyanVivo10.2.
I was using 10.1 with BT headset and everything was almost fine.
Then i decided to move to 10.2 stable 4 and when i tried to check BT headset i have found some extreme cracking noise when listening some audio. So i check my BT headset with other phones but all was fine with it. Trick with switching files doesn't work at all (even with 1.5x speed cracking noise is still present).
In order to find a solution i checked other versions of szezso's 10.2 (stable 4,5) and noticed that this "cracking noise" is not so noticeable in Troj80's version (stable 3) of this rom. The solution of this problem was found in CyanVivo X where this noise was absent. As i understand the trouble lies in A2DP and Bluetooth files.
Update:Checked VivoKat 4.4 for this noise in BT headset and I haven't found it there.
Maybe someone who are more skillful has some ideas of this trouble?
Question to Szezso:
Is it possible to insert files from CVX to CV10.2 and will it work ?