Related
------------- ANDRO-ID OC KERNEL -----------------------------
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 15 feature and UV module
MOD EDIT
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (801Mhz ) smart boot 15 feature and UV module
MOD EDIT
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (868Mhz ) smart boot 15 feature and UV module
MOD EDIT
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 18 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV/GPU module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 18 feature and UV/GPU module
MOD EDIT
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
This is from @Squadzone , thanks before. :good:
Overclock? To 763 MHz? This is Underclock! LOLOLOL
This post haven't sense.
+1 Qeemi...
And btw Andro-id???
limaakum said:
+1 Qeemi...
And btw Andro-id???
Click to expand...
Click to collapse
If the normal frequency is 600mhz then for sure it's not for a bcm21533 processor
who wanna brick the phone ? xD somebody wanna try it?
We hv 832mhz processor.
Sent from my GT-S5830i using xda premium
carlos9545 said:
who wanna brick the phone ? xD somebody wanna try it?
Click to expand...
Click to collapse
If it softbricks my phone, yes.
But if it hardbricks my phone, no.
Sent from my GT-S5830i using xda premium
refazta90 said:
------------- ANDRO-ID OC KERNEL -----------------------------
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 15 feature and UV module
"> http://www.mediafire.com/?ji1gotry7jia3yh <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (801Mhz ) smart boot 15 feature and UV module
"> http://www.mediafire.com/?jj12ups72r8xpyp <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (868Mhz ) smart boot 15 feature and UV module
"> http://www.mediafire.com/?e7yhpc5jnokb7ai <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 18 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV/GPU module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 18 feature and UV/GPU module
"> http://www.mediafire.com/?61vx9id6kih66a2 <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
This is from @Squadzone , thanks before. :good:
Click to expand...
Click to collapse
Checkout the Processor of Ace s5830i and then post man
---------- Post added at 07:43 PM ---------- Previous post was at 07:41 PM ----------
iamareebjamal said:
Checkout the Processor of Ace s5830i and then post man
Click to expand...
Click to collapse
Mod
Please close this thread too
Its for Galaxy Fit I think
DID ANY 1 TRIED DIS OVERCLOCK
I THINK
HOW COULD IT BE OVERCLOCK IF WE MADE D CPU 700MHZ?
ISNT D CPU 832MHZ?
SOME 1 TELL ME
This kernel is not for ace-i,is for galaxy fit,ok?
Moderator notified
POTATO!!!!
Thread closed. I have some serious doubts about this kernel. Also the sources haven't been provided.
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 17 feature Governors
"> www.mediafire.com/?1jvyh6lv8qabdap <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV/GPU module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 17 feature Governors with UV/GPU module
"> www.mediafire.com/?i2f8wtt3occy7p3 <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop --------------------
Download Link for OverClock kernel (801Mhz ) smart boot 17 feature Governors
"> www.mediafire.com/?a0a8lyfn0u0f0gg <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
Download for app ( No-frills, antutu power saver, MIUIcamera, WiredTether )
">>>> www.mediafire.com/?3ne3v721u0d08wi <<<<<"
install Manually
Feature added into kernel :
1. ext4 filesystem as default ( support ext2 and ext3 too )
2. SIO, VR, NOOP, BFQ, CFQ, DEADLINE scheduler, SIO as default ( choose with no-Frillis )
3. 17 Governors ( see POLL ABOVE ) ( choose with no-Frillis )
4. Overclock upto 801,2Mhz ( 868Mhz coming soon )
5. UnderVolt module
6. Gpu module
for reference about Governor and I/O scheduler
thanks to knzo
all module is port from
[Module] X8Undervolt | v001 | X8 | X10 mini | X10 mini pro | by doixanh
Dont forget to give a thanks to squadzone, raj3534, because of him, i can publish this kernel
this kernel base on cm-kernel
CyanogenMod
for Overclock reference
burstlam
Wrong device. :\
EDIT: This kernel is for Galaxy Fit
Download Link for OverClock kernel (763 Mhz )
Download Link for OverClock kernel (801Mhz )
use no-Frills for OC and I/O setting
if get unstable , please set max 600 Mhz again, enjoy
Feature added into kernel :
4. Overclock upto 801,2Mhz ( 868Mhz coming soon )
Click to expand...
Click to collapse
Guy, this processor is not 763 MHz when overclocked, it's 832 MHz when not overclocked !!!!!
This is for another processor !
Sent from my GT-S5830i using xda premium
This is bull **** ;/ THIS IS NOT FOR S5830I !! sorry for my english
refazta90 said:
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 17 feature Governors
"> www.mediafire.com/?1jvyh6lv8qabdap <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV/GPU module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 17 feature Governors with UV/GPU module
"> www.mediafire.com/?i2f8wtt3occy7p3 <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop --------------------
Download Link for OverClock kernel (801Mhz ) smart boot 17 feature Governors
"> www.mediafire.com/?a0a8lyfn0u0f0gg <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
Download for app ( No-frills, antutu power saver, MIUIcamera, WiredTether )
">>>> www.mediafire.com/?3ne3v721u0d08wi <<<<<"
install Manually
Feature added into kernel :
1. ext4 filesystem as default ( support ext2 and ext3 too )
2. SIO, VR, NOOP, BFQ, CFQ, DEADLINE scheduler, SIO as default ( choose with no-Frillis )
3. 17 Governors ( see POLL ABOVE ) ( choose with no-Frillis )
4. Overclock upto 801,2Mhz ( 868Mhz coming soon )
5. UnderVolt module
6. Gpu module
for reference about Governor and I/O scheduler
thanks to knzo
all module is port from
[Module] X8Undervolt | v001 | X8 | X10 mini | X10 mini pro | by doixanh
Dont forget to give a thanks to squadzone, raj3534, because of him, i can publish this kernel
this kernel base on cm-kernel
CyanogenMod
for Overclock reference
burstlam
Click to expand...
Click to collapse
PROVE IT!!!
wrong thread
what is this??????
the OP is posting kernel of galaxy fit on this section.........
------------------ check the link with exactly same post --------------------
http://forum.xda-developers.com/showthread.php?t=1333883
Members please post relevant things to our device..............
" never do such things like the OP "
if i help u in any way then hit thanks button........................
Thread closed.
Best kernel for battery performance and user experience (Lag free).
Please mention:
- Which ROM you are on and the kernel version
- CPU Governor if not default
- I/O Scheduler if not default
- If you manually UC/OC the CPU/GPU (mention frequency)
- If you manually adjust UV values then how low (if not kernel default)
PS: If any other Kernel apart from the Poll options then do write about it.
Let me start off
- Stock (rooted) with Franco R15
- Governor Interactive (default)
- I/O Deadline (default)
- No OC/UC done to CPU/GPU (default)
- No UV done (default)
mjehan said:
Best kernel for battery performance and user experience (Lag free).
Please mention:
- Which ROM you are on and the kernel version
- CPU Governor if not default
- I/O Scheduler if not default
- If you manually UC/OC the CPU/GPU (mention frequency)
- If you manually adjust UV values then how low (if not kernel default)
PS: If any other Kernel apart from the Poll options then do write about it.
Click to expand...
Click to collapse
Firstly, should NOT be in this section, maybe in General. Secondly, I'm pretty sure best ROM/kernel threads are not allowed on xda, or so I've been told.
This is not appropriate for a development section. Moved to General.
INTRODUCTION
Following @Lord Boeffla's wish I decided to start a new unofficial Samsung Galaxy S5 Boeffla-Config sharing thread, similar to already existing threads for Samsung Galaxy S3 by @boyheadkick and OnePlus Onehttp://forum.xda-developers.com/oneplus-one/general/unofficial-boeffla-kernel-profile-t2998145 by @S1ay3r666.
Please read this first:
The main purpose of this thread is to share Boeffla-Config profiles for Samsung Galaxy S5 Boeffla-Kernels made by the users.
Please post your profiles on this thread providing following information:
- rom;
- purpose (battery saving, performance or balanced);
- short description;
- download link.
I will collect links to all shared profiles on Post #2
Don't ask what configuration/profile is the best - there is NON. Everybody should find his/her best fitting profile according to your set up and personal phone usage. Just read about the profiles, choose one, apply, test and decide if you keep it or not.
By applying any of shared profiles you take full responsibility of their usage.
HOW TO MAKE AND ACTIVATE A PROFILE:
-> HOW TO MAKE A PROFILE FILE:
[1] Generate a profile file in Boeffla Config V2 app:
- open Boeffla Config V2 app;
- go to profiles ("Profile maintenance");
- tap and hold on a profile;
- Choose "EXPORT TO FILE" option.
[2] Find your "xxx.bcprofile" file in "/data/media/0/boeffla-kernel-data" folder;
-> HOW TO ACTIVATE A PROFILE FILE:
[1] Download "xxx.bcprofile" file;
[2] Put it into "/data/media/0/boeffla-kernel-data" folder;
[3] Activate the profile in Boeffla Config V2 app:
- open Boeffla Config V2 app;
- go to profiles ("Profile maintenance");
- choose "LOAD FOREIGN" option if you don't like custom CPU voltages and LKM settings to be loaded or
- choose "LOAD" option if you would like all profile settings to be loaded;
- choose downloaded profile;
- activate it in the list by tapping on it (it should be blue).
LINKS:
[1] Official Boeffla-Kernel DEV thread for Samsung Stock Lollipop roms by @Lord Boeffla -> donload link for kernels, Boeffla-Config app, development related discussion;
[2] Official Boeffla-Kernel DEV thread for CM roms by @Lord Boeffla -> donload link for kernels, Boeffla-Config app, development related discussion;
[3] Most up to date guide on CPU governors and I/O schedulers by @gsstudios -> a lot of useful information one CPU governors, I/O schedulers and tuning tips;
[4] KERNELS EXPLAINED, governors, hotplug, frequency, CPU, GPU, I/O, etc by @bloof -> some more information about kernel settings.
Now is your turn - post your profiles!
PROFILES:
SAMSUNG:
1. @Many40 profiles:
- Many40_Battery1 profile - battery
2. @cooperke profiles:
- Daily use / impulse profile - balanced
3. @farid993 profiles:
- Daily use / lionheart profile - balanced
4. @4Smoky profiles:
- 4Smoky optimize profile - battery
5. @aeonix_05 profiles:
- aeonix_05 Performance and battery friendly config - balanced
6. @marco_wack profiles:
- marco_wack yankactive profile - balanced?CM11:
1.
2.
3.
CM12:
1. @1indwurm profiles:
- 1indwurm daily use profile - balanced
2. @Lord Boeffla profiles:
- Lord Boeffla daily-usage profile - balanced
3.
- Reserved #1 -
- Reserved #2 -
Here is my Boeffla-Config profile which I'm using on a daily basis:
1. Purpose: Battery saving
2. Rom: Samsung Lolipop / Alliance v8,0;
3. Description:
- Governor: Pegasusq tweaked by me for better battery life
- I/O scheduler: Sio;
- CPU UC -> max frequency: 1728 MHz;
- Hotplug settings: Optimized;
- CPU voltages: -50mV undervolt for all frequencies;
- GPU UC -> max frequency: 462 MHz;
- Touch boost: OFF
- Logging: OFF
- The other settings - default
This gives me very good battery life without any noticeable downgrade of performance/stability of my phone -> I don't use my phone on a daily basis in "a performance-demanding way"
Important: if you experience reboots turn off undervolting as phones don't behave in the same way when undervolted.
4. Download:
Hi
I'm using alexndr odex BOE 3 rom.
Purpose : Stability and battery saving
Governor Interactive
interactive-battery
Scheduler row / row
No under volting or OC
LED fade on
touch wake on
Currently on boeffla 1.2 b4
chiacp said:
Hi
I'm using alexndr odex BOE 3 rom.
Purpose : Stability and battery saving
Governor Interactive
interactive-battery
Scheduler row / row
No under volting or OC
LED fade on
touch wake on
Currently on boeffla 1.2 b4
Click to expand...
Click to collapse
Thanks but could you export Boeffla config profile to a file and upload the link to it here?
Sent from my SM-G900F using Tapatalk 2
http://d-h.st/SYZL
This is the profile i use.
1. Purpose: daily use
2. Rom: Samsung Lolipop / stock BOB7
3. Description:
- Governor: Impulse
- I/O scheduler: BFQ
- Hotplug settings: Optimized;
- Logging: OFF
- Boost frequentie: 729
- The other settings - default
cooperke said:
http://d-h.st/SYZL
This is the profile i use.
Click to expand...
Click to collapse
Thanks but for the others who would like to try it would be useful if you provide some info about it. As an example please see my post above.
Just edit your post with profile description like described in OP.
Edit: profile linked to post #2
1. Purpose: daily use
2. Rom: Samsung Lolipop / stock BOE5
3. Description:
- Governor: lionheart
- I/O scheduler: fiops
- Readahead buffer: 1024
- GPU min: 27MHz
- The other settings: default
I really like this setting. love it!! Its great on performance and multi tasking and also has good battery life.
farid993 said:
1. Purpose: daily use
2. Rom: Samsung Lolipop / stock BOE5
3. Description:
- Governor: lionheart
- I/O scheduler: fiops
- Readahead buffer: 1024
- GPU min: 27MHz
- The other settings: default
I really like this setting. love it!! Its great on performance and multi tasking and also has good battery life.
Click to expand...
Click to collapse
Thanks. But upload (make an archive zip file before) / or post the link to your config profile file here please
Just edit your post and put the file or the link to file.
thank you for sharing i will try!
Here is my Boeffla-Config profile which I'm using daily
1. Purpose: Stable-little Battery saving
2. Rom: Samsung Lolipop / Alexander Bo6
3. Description:
- Governor: smartmax
- I/O scheduler: tripndroid
- Hotplug settings: Optimized
- CPU voltages: -25mV undervolt for all frequencies
- Touch boost: OFF
- Logging: OFF
- Led speed 8
-Led Brightness 255
Many40 said:
Here is my Boeffla-Config profile which I'm using on a daily basis:
1. Purpose: Battery saving
2. Rom: Samsung Lolipop / Alliance v8,0;
3. Description:
- Governor: Pegasusq tweaked by me for better battery life
- I/O scheduler: Sio;
- CPU UC -> max frequency: 1728 MHz;
- Hotplug settings: Optimized;
- CPU voltages: -50mV undervolt for all frequencies;
- GPU UC -> max frequency: 462 MHz;
- Touch boost: OFF
- Logging: OFF
- The other settings - default
This gives me very good battery life without any noticeable downgrade of performance/stability of my phone -> I don't use my phone on a daily basis in "a performance-demanding way"
Important: if you experience reboots turn off undervolting as phones don't behave in the same way when undervolted.
4. Download link: http://d-h.st/jMho
Click to expand...
Click to collapse
No file in the .zip got another download location ? (mirror)
ryanraven said:
No file in the .zip got another download location ? (mirror)
Click to expand...
Click to collapse
Try again from post #5
Sent from my SM-G900F using Tapatalk 2
1. Purpose: Battery saving
2. Rom: CM11;
3. Description:
- Governor: Interactive;
- I/O scheduler: Noop;
- CPU UC -> max frequency: 1958 MHz;
- Hotplug settings: Default;
- CPU voltages: -50mV undervolt for all frequencies;
- GPU UC -> max frequency: 320 MHz;
- Touch boost: 960Mhz
- Logging: OFF
- The other settings: Vnswap 820
core720 said:
1. Purpose: Battery saving
2. Rom: CM11;
3. Description:
- Governor: Interactive;
- I/O scheduler: Noop;
- CPU UC -> max frequency: 1958 MHz;
- Hotplug settings: Default;
- CPU voltages: -50mV undervolt for all frequencies;
- GPU UC -> max frequency: 320 MHz;
- Touch boost: 960Mhz
- Logging: OFF
- The other settings: Vnswap 820
Click to expand...
Click to collapse
Thanks but could you please upload (or provide a link) your profile file into your post as well?
Sent from my SM-G900F using Tapatalk 2
Best deep-sleep(0.5%/h) , performance and battery friendly config:
TW ROM
Governor: zzmove
Profile: insane
Scheduler: row
No OC
Hotplug settings: zzmove native default
No UV
GPU Governor: msm-adreno-tz
Touch boost set to 1497
aeonix_05 said:
Best deep-sleep(0.5%/h) , performance and battery friendly config:
Governor: zzmove
Profile: insane
Scheduler: row
No OC
Hotplug settings: zzmove native default
No UV
GPU Governor: msm-adreno-tz
Touch boost set to 1497
Click to expand...
Click to collapse
Thanks. Is it for Sammy rom?
Many40 said:
Thanks. Is it for Sammy rom?
Click to expand...
Click to collapse
Yes. Ill update my post
Code:
/*
*
* I not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns do some research
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, i will laugh at you.
*
*/
Kernel Features:
-GOVERNORS
ADAPTIVE
BIOSHOCK
CONSERVATIVEX
INTERACTIVE
LAGFREE
LIONHEART
ONDEMAND
PERFORMANCE
POWERSAVE
BARRY ALLEN
USERSPACE
WHEATLEY
ALUCARD
INTERACTIVEX
FRANKENSTEIN
DYNAMIC INTERACTIVE
HOTPLUG
SMARTMAX
LULZACTIVE
DARKNESS
IMPULSE
CYAN
BLUACTIVE
NIGHTMARE
LAZY
PEGASUSQ
INTELLIACTIVE
SMARTASSH3
YANKACTIVE
THESSJACTIVE
SMARTASS2
HOTPLUG
HYBRID
INTEL
HOTPLUGS
AUTOSMP
ALUCARD
INTELLIPLUG
MAKO HOTPLUG
MSM HOTPLUG
ZEN DECISION
-SCHDULERS
NOOP
BFQ
SIO
DEADLINE
CFQ
SIOPLUS
ROW
FIOPS
FIFO
ZEN
VR
TRIPNDROID
-TCP CONG.
BIC
CUBIC
WESTWOOD
HTCP
HSTCP
HYBLA
VEGAS
SCALABLE
LP
VENO
YEAH
ILLINOIS
-OC
-UC
-KSM optimized
-CPU Optimizations
-Built with custom GCC 5.3.1 toolchain
-ZRAM support
-Some Tweaks
Kernel Link
https://www.androidfilehost.com/?w=files&flid=57205
OLD builds
https://www.androidfilehost.com/?w=files&flid=62867
XDA:DevDB Information
OctoDex, Kernel for the Asus ZenFone 2
Contributors
Nyks45, say99
Source Code: https://github.com/Nyks45/OctoDex-Kernel
Kernel Special Features: ME
Version Information
Status: Stable
Created 2016-05-09
Last Updated 2016-08-19
Reserved
wrongly created that post dunno how to delete
Change-log V5.0
Kernel Name Changed To OctoDex
Fixed AOSP Issues
Fixed Issues Beacuse Of Linux Ver Updates
Add A New GPU Driver
Add Frankenstein Governor
Add USB Keyboard Mouse Tweak
Disable CRC Check
Add-Tune-Update MSM-Hotplug
Add-Tune AUTOSMP
Tune-Update Intelli-Plug
Add Intelliactive Governor
Add TheSSJActive Governor
Add Yankactive Governor
Add Sio-Plus
Add ROW
Add Barry Allen Governor
Add lulzactive Governor
Add Dynamic Interactive Governor
Add Mako Hotplug
Add Support For Set minimum GPU frequency according to screen state
And Intel Powerclamp For Term.
Add tweaked simpleondemand GPU governor
Add Smartass2 Governor
Update And Modify InteractiveX For Quad Core Devices
Update Interactive
Add Hybrid Governor
Add Hotplug Governor
Implement zen-tune v4
Update smartass2
---------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------
Change-log V4.0
Linux Kernel Version Updated To Latest 3.10.102
AOSP support Added
Init.d support Added
GPU Tweaks
Deep Sleep Tweaks
Some Fixes For Annoying Bugs
Kernel Re-Base
----------------------------------------------------------------------------------------------------------------------------------------------
Change-log V3.5
Re-added Alucard Hotplug
Removed Hotplug Governor
Switched Gcc5.3.1
Kernel Version updated to 3.10.98
Corrections on deep sleep
Fixing some governors
Fixing GPU
New Power Management Controller Thanks To Sayeed
Switch to OFAST
Update intelli-plug
Correct About Phone/Kernel Version
Some Corrections on power efficient workqueues
---------------------------------------------------------------------------------------------------------------------------------------------
Change-log V3.0
Removed Alucard Hotplug
Some Makefile additions and tweaks
Add QuickWakeUp For Fixing Possible Wake Up İssues
Update Kernel Version Up To 3.10.30
More Agressive Power efficient Work queues
Fix GPU Clock Speed(Still Looks Not Changing But İt is Changing i tried
Some GPU Tweaks
Add İntelli-Plug Hotplug
Make İntelli-Plug Hotplug Better
---------------------------------------------------------------------------------------------------------------------------------------------
Change-log V2.5
Power efficient Work queues Added and Fixed
Nightmare governor added
Lazy governor Added
Blueactive Governor added
Pegasusq governor added
Min Brightness can be 0 (From Sayeed's Modded Kernel Auditor)
GPU Tweaks
GPU Frequency issue fixed
Gpu Unlocked NOW
AUTOSMP Hotplug Removed
Zen_Desicion Hotplug added
Possible Fix For wake up
OPTIMAL KVM ADDED
Versions are seperated
-KVM_OC
-KVM_NON_OC
-OC
-NON_OC
---------------------------------------------------------------------------------------------------------------------------------------------
Change-log V2.0
Cyan Governor added
Impulse governor added
Alucard Hotplug added
Dynamic FSync v1.5 added
Powersuspend v1.5 added
Gpu Unlocked
Simpleondemand tweaked gpu governor added
Quick wake up added
Implemented Async Fsync from HTC
Switched 4.9 Toolchain
---------------------------------------------------------------------------------------------------------------------------------------------
Change-log V1.3
Deadline Schduler Added
Tripndroid Schduler added
Battery Life Extender Added
Exfat Support Added
Darkness Governor added
Tcp Algoritms Added
-Westwood
-reno
-bic
-cubic
-highspeed
-htcp
-vegas
-veno
-scalable
-lp
-yeah
-illinois
---------------------------------------------------------------------------------------------------------------------------------------------
If u want features please write
one more
Nice one, xposed is supported ?
:good:
nazagan said:
Nice one, xposed is supported ?
:good:
Click to expand...
Click to collapse
didin't tried but i think yes
Awesome!
I saw that you are going to release an important Beanstalk build
Will this kernel be built in Beanstalk or is it compatible to flash?
gugas123 said:
Awesome!
I saw that you are going to release an important Beanstalk build
Will this kernel be built in Beanstalk or is it compatible to flash?
Click to expand...
Click to collapse
which one is good u think
Nice work
Great.
I will download to test, it is running in ROM Bliss 6.3 ??
Can I install it on AOSP ROM? THANKS
Thanks
Fishcat7 said:
Can I install it on AOSP ROM? THANKS
Click to expand...
Click to collapse
didn't tried
GuilhermeXtreme said:
I will download to test, it is running in ROM Bliss 6.3 ??
Click to expand...
Click to collapse
yes
Another kernel, wow
Great job!
On Temasek rom latest build kernel works fast... no benchmarks yet, looks promising ?
Wysłane z mojego ASUS_Z00A przy użyciu Tapatalka
Automatic rotation is broken on DU.
Would like to see Tripndroid scheduler, battery life extender and network tcp algorithms,implemented if possible ? other than that it's running smooth so far @Nyks45
Sent from my ASUS_Z00A using Tapatalk
nazagan said:
Automatic rotation is broken on DU.
Click to expand...
Click to collapse
Aosp not supported yet
kos4all said:
Would like to see Tripndroid scheduler, battery life extender and network tcp algorithms,implemented if possible other than that it's running smooth so far @Nyks45
Thanks
I will add
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Nyks45 said:
Aosp not supported yet
Click to expand...
Click to collapse
I'm using the kernel with DU and apart from the rotation everything is incredibly smooth!
Sent from my ASUS_Z00A using Tapatalk