Database Develop

[Q] need help about knzo kernel and huexxx

if im use huexx kernelhttp://forum.xda-developers.com/showthread.php?t=1332311
its include knzo patched libsqlite?or i must instal that(again)???which performance governor smatass v2 or minmax(huexx v3 kernel)I/O bfq or deadline??sorry for may bad english

If you had readed the first post of my thread, you could read that since V2 I've included the patched libsqlite.so.
Regards.
---------- Post added at 12:14 PM ---------- Previous post was at 12:12 PM ----------
And, to say that yo don't HAVE TO patch anything, it's not mandatory, it will give you some advantages in SQL transactions, but without this patch your phone will work flawlessly.
I'll give a file to restore original libsqlite because to patch it can loss data in case of a suddenly lack of power or reboot of the phone.
Regards.

Huexxx said:
If you had readed the first post of my thread, you could read that since V2 I've included the patched libsqlite.so.
Regards.
---------- Post added at 12:14 PM ---------- Previous post was at 12:12 PM ----------
And, to say that yo don't HAVE TO patch anything, it's not mandatory, it will give you some advantages in SQL transactions, but without this patch your phone will work flawlessly.
I'll give a file to restore original libsqlite because to patch it can loss data in case of a suddenly lack of power or reboot of the phone.
Regards.
Click to expand...
Click to collapse
thanks sir...rrrrrr,cm7 support overclock??

Not yet...

Bigmem tweak broke on last Tsunami build (5.5)

Escuse me if this isn't the right place, but I didn't knew where to put it since I have no privileges to post in the development forums, still my problem is that since I installed the latest Tsunami build (5.5) I wasn't able to use bigmem (amongst a few other glitches). I tried Devil Kernel utility as well as Semaphore to no avail, it says that it can't write sys/kernel/bigmem folder, I tried to create it manually using some file managers but without luck.
I'm quite stuck at it, perhaps some has acknowledge this very same problem and already solved, it would be much apreciated since my Samsung really need all the RAM it can get its hands off!

Maybe bigmem libs
vertigoz said:
Escuse me if this isn't the right place, but I didn't knew where to put it since I have no privileges to post in the development forums, still my problem is that since I installed the latest Tsunami build (5.5) I wasn't able to use bigmem (amongst a few other glitches). I tried Devil Kernel utility as well as Semaphore to no avail, it says that it can't write sys/kernel/bigmem folder, I tried to create it manually using some file managers but without luck.
I'm quite stuck at it, perhaps some has acknowledge this very same problem and already solved, it would be much apreciated since my Samsung really need all the RAM it can get its hands off!
Click to expand...
Click to collapse
with semaphore s version you have to aply patch
http://forum.xda-developers.com/showthread.php?p=30725734
---------- Post added at 01:28 PM ---------- Previous post was at 01:23 PM ----------
JB_BigMem_26-aug-12.zip
http://forum.xda-developers.com/showpost.php?p=30725734&postcount=61

idroj said:
with semaphore s version you have to aply patch
http://forum.xda-developers.com/showthread.php?p=30725734
---------- Post added at 01:28 PM ---------- Previous post was at 01:23 PM ----------
JB_BigMem_26-aug-12.zip
http://forum.xda-developers.com/showpost.php?p=30725734&postcount=61
Click to expand...
Click to collapse
Thanks... It's that with Tsunami 5.2 it worked, so I find it strange this 'downgrade', well a bit of things changed as well. I'll try to see if this solve it.

BTW do you know how to install the patch?

idroj said:
with semaphore s version you have to aply patch
http://forum.xda-developers.com/showthread.php?p=30725734
---------- Post added at 01:28 PM ---------- Previous post was at 01:23 PM ----------
JB_BigMem_26-aug-12.zip
http://forum.xda-developers.com/showpost.php?p=30725734&postcount=61
Click to expand...
Click to collapse
It made it worse, got a black background and my status bar ceased to work

Send a private message to Tsunami developer
I will try a clean flash, and if you change the kernel, mount data and datadata anf fix permissions. If problem persists send a PM to developer.
When i have a question to developer I send PM if I don't find a solution.

vertigoz said:
Escuse me if this isn't the right place, but I didn't knew where to put it since I have no privileges to post in the development forums, still my problem is that since I installed the latest Tsunami build (5.5) I wasn't able to use bigmem (amongst a few other glitches). I tried Devil Kernel utility as well as Semaphore to no avail, it says that it can't write sys/kernel/bigmem folder, I tried to create it manually using some file managers but without luck.
I'm quite stuck at it, perhaps some has acknowledge this very same problem and already solved, it would be much apreciated since my Samsung really need all the RAM it can get its hands off!
Click to expand...
Click to collapse
Hi bro,
try to install SEMAPHORE 3.0.0s... or wait for new TSUNAMI 5.6 ...... I'll realese it today...
Lory

xlory said:
Hi bro,
try to install SEMAPHORE 3.0.0s... or wait for new TSUNAMI 5.6 ...... I'll realese it today...
Lory
Click to expand...
Click to collapse
\o/ )

idroj said:
I will try a clean flash, and if you change the kernel, mount data and datadata anf fix permissions. If problem persists send a PM to developer.
When i have a question to developer I send PM if I don't find a solution.
Click to expand...
Click to collapse
Well, I will probably do it in the future, thanks for the advice.

[KERNEL][4.3.x AOSP] NX-Kernel v1.0.4 [10/25]

Hey guys,
Keeping description short, this kernel will aim for performance, battery-saving, and stability for AOSP 4.3.x Jellybean ROMs.
Kernel Main Features:
- CM Source Synced Till Date
- Linaro Built (for more performance)
- Added Governors - SmartAssV2, OnDemandX (Default), SavagedZen, AssWax
- Miscellaneous Fixes (Check changelog and github source)
- Added Schedulers - BFQ, Zen, VR
- OC possible (See changelog)
- Dynamix Fsync
- More Free RAM
- LowMemoryKiller fine tuned
- Updated ZRAM
For upcoming builds:
- Requests?
Source:
https://github.com/neobuddy89/android_kernel_samsung_aries
Download:
http://www.mediafire.com/?24eu30jjvaue3
Installation Instructions:
1. Make sure you are on 4.3 AOSP ROM (Tested only on CM10.2)
2. Reboot in recovery
3. Flash Kernel
4. Reboot.
Be part of our FB Group HERE to get in touch with crazy androidphiles!!
Thanks to:
CyanogenMod Team - Team Hacksung
XDA Contributors keeping forum alive
Nelson - my mentor! Team Passion Developer
FB Group Crazy people

Changelog:
v1.0.4(25-Oct-13)
- Compatible with New CM 10.2 builts (Fixed Phone apk FC)
- Linux Kernel Version upgraded to v3.0.101
- Now compiled with Linaro 4..8-2013.09 toolchain
- Updated ROW scheduling algorithm
- Updated BFQ scheduling algorithm
- Restored softvfp instead of Neon libraries to avoid visual artifact
- Added optimized ZRAM_FOR_ANDROID (which is suprisingly missing in i9000 source)
- Updated ZRAM massively
- ZRAM uses faster LZ4 instead of CSNAPPY compression
- ZRAM of 50 MB on device
- Performance tweaked
- Reduced wifi wakelocks
v1.0.3(20-Oct-13)
- More free RAM without breaking Video functionality
- Performance improvement
- OC upto 1400 MHz. Default max is 1000 MHz. (WARNING: Untested. 1100 MHz maybe unstable. Please report)
- New default governor - OndemandX
- Removed HYPER governor
- Added AssWax and SavagedZen governors
- Added BFQ, ZEN and VR I/O schedulers
- Dynamic FSync feature added
- Low Memory Killer fine tuned
- Implemented Google's Snappy Compression for ZRam
- ZRam enabled by default - 300 MB
- Swappiness is set to 0. (Swap will occur only in Out of Memory situation)
- Network tweaks
- Use NEON library for VFP. Improved VFP functionality.
- Memory leak fixes
- Scripted: Junk cleaning on boot.
- Scripted: Mount partitions with tweaked options.
- Many minor fixes
v1.0.2 (19-Oct-13)
- Add SmartAssv2 and HYPER governor. Try out HYPER.
- Fix entropy depletion.
- Fix minor memory leak on thread exit.
v1.0.1 (19-Oct-13)
-Make Linaro Build
v1.0.0 (19-Oct-13)
-Standalone Build of basic CM Kernel dated 19th Oct

Reserved for Syria

Reserved for NASA

Planning on adding oc?
Sent from my SAMSUNG-SGH-T959 using xda app-developers app
---------- Post added at 09:21 PM ---------- Previous post was at 09:20 PM ----------
And more ram? Possibly. Just a sudgestion
Sent from my SAMSUNG-SGH-T959 using xda app-developers app
---------- Post added at 09:22 PM ---------- Previous post was at 09:21 PM ----------
DL link broken
Sent from my SAMSUNG-SGH-T959 using xda app-developers app

cannondaleV2000 said:
Planning on adding oc?
Sent from my SAMSUNG-SGH-T959 using xda app-developers app
---------- Post added at 09:21 PM ---------- Previous post was at 09:20 PM ----------
And more ram? Possibly. Just a sudgestion
Sent from my SAMSUNG-SGH-T959 using xda app-developers app
---------- Post added at 09:22 PM ---------- Previous post was at 09:21 PM ----------
DL link broken
Sent from my SAMSUNG-SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Optional OC will be added in later builds.
RAM management will be improved - ofcourse we cannot physically increase it
Checking download link - check back back in 2 min.
EDIT - DL fixed.

cannondaleV2000 said:
Planning on adding oc?
Sent from my SAMSUNG-SGH-T959 using xda app-developers app
---------- Post added at 09:21 PM ---------- Previous post was at 09:20 PM ----------
And more ram? Possibly. Just a sudgestion
Sent from my SAMSUNG-SGH-T959 using xda app-developers app
---------- Post added at 09:22 PM ---------- Previous post was at 09:21 PM ----------
DL link broken
Sent from my SAMSUNG-SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
You can change it from the normal 368 or so available to 395 though I can help with that if needed just pm me. Iv got expirence building for this device so I'll be able to help if needed
Sent from my SAMSUNG-SGH-T959 using xda app-developers app

cannondaleV2000 said:
You can change it from the normal 368 or so available to 395 though I can help with that if needed just pm me. Iv got expirence building for this device so I'll be able to help if needed
Sent from my SAMSUNG-SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Won't that break recording at high quality? As what I heard.
You can link me to the commit, if you have one.

neobuddy89 said:
Won't that break recording at high quality? As what I heard.
You can link me to the commit, if you have one.
Click to expand...
Click to collapse
395 is the max you can go without breaking anything. So at 395 everything works. Above that is when stuff starts breaking
---------- Post added at 10:02 PM ---------- Previous post was at 09:52 PM ----------
neobuddy89 said:
Won't that break recording at high quality? As what I heard.
You can link me to the commit, if you have one.
Click to expand...
Click to collapse
Check pms I sent you a link to the 395 ram commit. Btw if you need testers sign me up! Il test anything

cannondaleV2000 said:
395 is the max you can go without breaking anything. So at 395 everything works. Above that is when stuff starts breaking
---------- Post added at 10:02 PM ---------- Previous post was at 09:52 PM ----------
Check pms I sent you a link to the 395 ram commit. Btw if you need testers sign me up! Il test anything
Click to expand...
Click to collapse
Thanks, I will check it out
Will surely let you know if I need any test prior release.
v1.0.2 uploaded with 2 added governors and 2 crucial fixes.

neobuddy89 said:
Thanks, I will check it out
Will surely let you know if I need any test prior release.
v1.0.3 uploaded with 2 added governors and 2 crucial fixes.
Click to expand...
Click to collapse
Cool. What 2 governors. And good work on the kernel will flash now. But I just flashed 1.0.1 like 20 minutes ago lol
---------- Post added at 10:14 PM ---------- Previous post was at 10:10 PM ----------
cannondaleV2000 said:
Cool. What 2 governors. And good work on the kernel will flash now. But I just flashed 1.0.1 like 20 minutes ago lol
Click to expand...
Click to collapse
Only see 1.0.2 in do folder not 1.0.3
---------- Post added at 10:30 PM ---------- Previous post was at 10:14 PM ----------
Boot loop on newest version? Won't get past kernel splash
---------- Post added at 10:30 PM ---------- Previous post was at 10:30 PM ----------
Boot loop on newest version? Won't get past kernel splash

cannondaleV2000 said:
Cool. What 2 governors. And good work on the kernel will flash now. But I just flashed 1.0.1 like 20 minutes ago lol
---------- Post added at 10:14 PM ---------- Previous post was at 10:10 PM ----------
Only see 1.0.2 in do folder not 1.0.3
---------- Post added at 10:30 PM ---------- Previous post was at 10:14 PM ----------
Boot loop on newest version? Won't get past kernel splash
---------- Post added at 10:30 PM ---------- Previous post was at 10:30 PM ----------
Boot loop on newest version? Won't get past kernel splash
Click to expand...
Click to collapse
Yes, 1.0.2.
Sure for bootloop? There is no major change in it.
Got booted here properly.
EDIT : REUPLOADING. Seems uploading error.
EDIT: Reuploaded. Please check.

neobuddy89 said:
Yes, 1.0.2.
Sure for bootloop? There is no major change in it.
Got booted here properly.
EDIT : REUPLOADING. Seems uploading error.
EDIT: Reuploaded. Please check.
Click to expand...
Click to collapse
Will redo load right now. Does this have the 395mb ram? And this kernel already has 1.2ghz overclock which is cool
---------- Post added at 11:37 PM ---------- Previous post was at 11:20 PM ----------
Still bootlooping
Sent from my SAMSUNG-SGH-T959 using xda app-developers app

excited for this kernel. nice to see you building for viby again neo... :good:

Just upgraded to yours newest kernel.. It just saved me from rolling back to earlier version of CM.. As I was having a lot of problems with the newest version 10.2..But This 1.0.3 kernel has made this ROM a lot snappier and less problematic.. As I was experiencing forced closes and lethargic performance.. So anyway TY!!.. Job well done.. Its working flawlessly with 0 defects.. On My T-959 Vibrant...
Sent from my SGH-T959 using XDA Premium 4 mobile app

Ok got it booting but it won't reboot to recovery from the rom. I tried 2 different roms. So I have to go to recovery by shutting it off and using the me combo as of now. If you can fid. a fix for that it will be good. What was changed between 1.0.1 and 1.0.2?

cannondaleV2000 said:
Ok got it booting but it won't reboot to recovery from the rom. I tried 2 different roms. So I have to go to recovery by shutting it off and using the me combo as of now. If you can fid. a fix for that it will be good. What was changed between 1.0.1 and 1.0.2?
Click to expand...
Click to collapse
Not much changes in 1.0.2, you can check Changelog posted on page 1.
Recovery working here on CM10.2 ROM.
Just wait for next release within few mins.
Lot of changes!

neobuddy89 said:
Not much changes in 1.0.2, you can check Changelog posted on page 1.
Recovery working here on CM10.2 ROM.
Just wait for next release within few mins.
Lot of changes!
Click to expand...
Click to collapse
Cool. And if you add more over clocking I recommend not adding the 1100mhz step because it's extremely unstable on most vibrant devices for come reason

v1.0.3 is now up.
Changelog for v1.0.3:
- More free RAM without breaking Video functionality
- Performance improvement
- OC upto 1400 MHz. Default max is 1000 MHz. (WARNING: Untested. 1100 MHz maybe unstable. Please report)
- New default governor - OndemandX
- Removed HYPER governor
- Added AssWax and SavagedZen governors
- Added BFQ, ZEN and VR I/O schedulers
- Dynamic FSync feature added
- Low Memory Killer fine tuned
- Implemented Google's Snappy Compression for ZRam
- ZRam enabled by default - 300 MB
- Swappiness is set to 0. (Swap will occur only in Out of Memory situation)
- Network tweaks
- Use NEON library for VFP. Improved VFP functionality.
- Memory leak fixes
- Scripted: Junk cleaning on boot.
- Scripted: Mount partitions with tweaked options.
- Many minor fixes

Lz4 zram
One more idea LZ4 zram from dertuefel's source. It makes zram compression decompression better without extra CPU cycles

[ROM][4.0.4][CM9] CMLight by MoNTE48

CMLight 4.0.4​
Android 4.0.4, based on CM9!​ Based on the works kasper_h (Mackay ROM), CyanogenMod Team, Slim Tean, Remics Team, Stratosk, etc. ​
=> RAM: 373 MB;
=> Acceleration up to 1200 MHz;
=> Size: ~72 MB;
* Plenty of free RAM;
* Good playability (ROM for Gamers!);
* I'm a speed of your phone you did not expect!
Code:
I did it for myself and users 4PDA, but I want to share with you. I have long had a desire to do something like this, @ kasper_h podtolkunl me to do and I did it!
Download​All build: https://www.dropbox.com/sh/a2bwrpwckwlzu3y/Lyb0jK6JeX
Click to expand...
Click to collapse
GApps​New Market and Null. Realy:laugh:
02/2014:https://www.dropbox.com/sh/o8rzwcbdyfutwqm/kT9Omi8vat [7MB]
Click to expand...
Click to collapse
Thank You and Bye!
Your's MoNTE48.​

Reserve:laugh:...

port or fully compiled？:good:
---------- Post added at 03:27 PM ---------- Previous post was at 03:23 PM ----------
You can upload some screenshots?
---------- Post added at 03:33 PM ---------- Previous post was at 03:27 PM ----------
based galaxysmtd_2014_1.4 or 2014.1.3?

waihung0626 said:
port or fully compiled？:good:
---------- Post added at 03:27 PM ---------- Previous post was at 03:23 PM ----------
You can upload some screenshots?
---------- Post added at 03:33 PM ---------- Previous post was at 03:27 PM ----------
based galaxysmtd_2014_1.4 or 2014.1.3?
Click to expand...
Click to collapse
And port, and rebuild, and compiled.
Screenshots... Wait one day.
Based on ver. 1.3. 1.3/1.4, small modify.

Beware of ics it is prone to the eu bug. I am not saying anything about this ROM just ics in general.
SlimKat Mako

Don't get me wrong, but I don't see the point of creating a new thread for an ICS rom...

flapane said:
Don't get me wrong, but I don't see the point of creating a new thread for an ICS rom...
Click to expand...
Click to collapse
All the old threads are outdated (here is an updated version of the programme), on many threads can download links are not working. And let's face it: two weeks ago I was sitting on 4.2/4.3/4.4, and did not know what Real Racing 3, Asphalt 7, Iron Man 3, NFS work on Vibrant so good! I play for hours, the phone is not hung never!

jrongi1 said:
Beware of ics it is prone to the eu bug. I am not saying anything about this ROM just ics in general.
SlimKat Mako
Click to expand...
Click to collapse
Isn CyanogenMod not solved this problem? I had the EU on some ICS. Normally on the first day. This ROM I use more than 2 weeks, all is fine!

how to rebuild, and compiled what！thank you,I want to learn！

Xposed not install

no installl what at do

Post a log of your install would be best, a screenshot won't be enough to give solid feedback.
---------- Post added at 04:32 ---------- Previous post was at 04:29 ----------
However, looking at it it looks like a partially successful install.
Try to tick box "disable resource hooks".