Hello,
I have a Problem with my Xperia x8. I rooted it before a while and tried to make a custom rom. I did this more times before. But this time after I intalled the custom Rom and rebototed, the phone stucks by the SE Logo. So I tried to flash it with SEUS. But this says that is already the newest Software and i can olny press the Exit Button. The Repair Button isnt there. The Same with PCC.
I also tried to flash it with the Flashtool but i cant find the 1.6 kernel anywhere. All the Links I find are dead.
I dont now what to do now.
I hope someone can help me.
Regards, FiireLove
just download the stock 2.1 firmware and flash it with flashtool. or use seus.
Sent from my rooted tomato using xda app
How i said, SEUS dont works. I will try it with a 2.1 Kernel so far I found one. Because all Links i found are deleted.
FiireLove said:
How i said, SEUS dont works. I will try it with a 2.1 Kernel so far I found one. Because all Links i found are deleted.
Click to expand...
Click to collapse
sorry about that. just get the 2.1 firmware, not the kernel unless you've unlocked your bl and flashed a custom kernel. and full wipe if you're going to flash other custom roms afterwards.
Sent from my rooted tomato using xda app
FiireLove said:
How i said, SEUS dont works. I will try it with a 2.1 Kernel so far I found one. Because all Links i found are deleted.
Click to expand...
Click to collapse
You don't need the kernel. Flash there 2.1 stock firmware with flashtool and that's it.
Sent from my GT-I9000 using xda premium
Just in google search for x8/w8 stock ROM not kernel it will be a .tft file or .ftf file& flash it..Thats all
Sent from my E15i using xda premium
http://forum.xda-developers.com/showthread.php?t=1575266
Related
I want to install MiniCM7 2.2.1, I understand that the nAa-13 kernel is required before installing this.
I have tried flashing this kernel but get the error: ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
My phone details are:
Xperia X8i (E15i)
Firmware: 2.1 update1
Baseband: M76XX-TSNCJOLYM-53404015
Kernel: 2.6.29 [email protected]#1
Build no. 2.1.1.C.0.O
I tried installing the mini CM7 rom without the nAa-13 kernel and this soft bricked my phone. I had to download a stock 2.1 rom and reflash it.
Anyone know where I am going wrong?
Thanks in advance
Nakiboy said:
I want to install MiniCM7 2.2.1, I understand that the nAa-13 kernel is required before installing this.
I have tried flashing this kernel but get the error: ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
My phone details are:
Xperia X8i (E15i)
Firmware: 2.1 update1
Baseband: M76XX-TSNCJOLYM-53404015
Kernel: 2.6.29 [email protected]#1
Build no. 2.1.1.C.0.O
I tried installing the mini CM7 rom without the nAa-13 kernel and this soft bricked my phone. I had to download a stock 2.1 rom and reflash it.
Anyone know where I am going wrong?
Thanks in advance
Click to expand...
Click to collapse
You have to unlock your bootloader first before you can flash custom kernels.
Guide here: http://forum.xda-developers.com/showthread.php?t=1254225
If you find it too complicated, there are links to other guides in the OP. Make sure that your phone's manufacture date is 11W28 or below.
Sent from my X8 using Tapatalk 2
yeah
using s1 tool or flash tool
and read this too
http://forum.xda-developers.com/showthread.php?t=1481630
BlackRabbit1703 said:
yeah
using s1 tool or flash tool
and read this too
http://forum.xda-developers.com/showthread.php?t=1481630
Click to expand...
Click to collapse
Thanks for the replies guys, I'll git it a go
Im om mini cm7. And i want to install naa ics 4 kernel and mini cm9. Cant i flash it directly the kernel ? Thanks and sorry for noob question
Sent from my E15i using xda premium
playjun said:
Im om mini cm7. And i want to install naa ics 4 kernel and mini cm9. Cant i flash it directly the kernel ? Thanks and sorry for noob question
Sent from my E15i using xda premium
Click to expand...
Click to collapse
Flash kernel > Go to recovery > Full Wipe > Flash Rom.
Sent from my E15i using xda app-developers app
Thanks .so i dont need to uninstall naa 13.just direct flashing from naa 13 to naa ics4.
Sent from my E15i using xda premium
playjun said:
Thanks .so i dont need to uninstall naa 13.just direct flashing from naa 13 to naa ics4.
Sent from my E15i using xda premium
Click to expand...
Click to collapse
yes
playjun said:
Thanks .so i dont need to uninstall naa 13.just direct flashing from naa 13 to naa ics4.
Sent from my E15i using xda premium
Click to expand...
Click to collapse
yes you can
from MiniCM7 you can directly flash he ICS kernel and ICS ROM without any prob
if you stuck on logo or boot animation just wait
or flash it again..kernel and ROM
and dont forget to backup after flash kernel,, then factory reset, etc after flash the kernel
SpyderX said:
You have to unlock your bootloader first before you can flash custom kernels.
Guide here: http://forum.xda-developers.com/showthread.php?t=1254225
If you find it too complicated, there are links to other guides in the OP. Make sure that your phone's manufacture date is 11W28 or below.
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
I have a problem, after flashing my x10mini I got a black screen and i cant even get into recovery. I have allready unlocked the bootloader and every time I flash same thing happens... :\ any help????
Betogil89 said:
I have a problem, after flashing my x10mini I got a black screen and i cant even get into recovery. I have allready unlocked the bootloader and every time I flash same thing happens... :\ any help????
Click to expand...
Click to collapse
try to reflash the whole system with Sony Ericsson Update Service. If your phone can be switch on then just flash the kernel with Flash tool, and try again to access the recovery. Good luck
if you still can connect your phone to PC, there's way to safe your phone
Hi, I was trying ROMs in my X8 and now I want to come back to the original stock 2.1 firmware, but the PC Companion says that there arent updates for my phone, so I cant flash it using companion.
I want tu use the FlashTools but I cant find the E15a firmware becouse all the links are in megaupload or are dead. I only found this thread http://forum.xda-developers.com/showthread.php?t=1575266 but I dont stand what you have to do with that X8.sin, really I dont stand nothing in that thread, I need only the E15a tft and there says you have to build it...
Check the link in here
Sent from my X8 using Tapatalk 2
Did you? Try to find the Sony Update Service (not Sony Ericsson ... - it's old version and doesn't work). After install it you can install Stock software, even if it detects correct - as the restoration in case of problems.
here the link bro-
http://www.mediafire.com/?8bce4dx39e4vp
I'm sorry, couldn't paste the Url before post
Good Luck
Try to use the latest version of seus
Sent from my E15i using xda premium
The link its dead
Downloading Sony Update Service...
iyurcic95 said:
Downloading Sony Update Service...
Click to expand...
Click to collapse
click here
or here
Dear friends,
I always stuck at SE logo whenever I try to install custom rom. Here is what I do:
1. Root My stock 2.1 with Flashtool
2. Install Busybox with flash tool
3. Copy xrecovery's 3 files to system/bin
4. Restart in xrecovery and Choose Install custom zip
5. After installation, I reboot and stuck!!!
I have tried "MiniCM7-2.2.1-shakira" and "GingerDX-v029-shakira.zip"
Any Help?? I dont want to unlock my bootloader.
Thnx
"MiniCM7-2.2.1-shakira" and "GingerDX-v029-shakira.zip" uses custom kernel.must on unlockbootloader
use gingerdx v29 for stuck
sent from my x8™ using gingerDX®
Did you do a full wipe?
Skickat från min ST18i via Tapatalk 2
Find some help here ... don't use xrecovery, cwm is better ... and use gingerDX stock... my recommendation
http://forum.xda-developers.com/showthread.php?t=1932560
CWM recovery needs bootloader to be unlocked??
Jahanzaib Irfan said:
CWM recovery needs bootloader to be unlocked??
Click to expand...
Click to collapse
No,its like xrecovery
So,use cwm,full wipe before installing and check(at the about phone) your baseband,it should be like this, xxx15,if its not, update it with pccompanion or flashtool
Sent from my X8 using xda premium
Thnx to all, you made my day Guyzz... Blessings!!!
Jahanzaib Irfan said:
Thnx to all, you made my day Guyzz... Blessings!!!
Click to expand...
Click to collapse
goodluck.and be sure to use a custom rom for stock kernel.
sent from my x8™ using gingerDX®
playjun said:
goodluck.and be sure to use a custom rom for stuck.
sent from my x8™ using gingerDX®
Click to expand...
Click to collapse
Its not "for stuck",its "for stock (kernel)"
Sent from my X8 using xda premium
thanks for correction
sent from my x8™ using gingerDX®
One more thing friendz, after installing GingerDX for stock, i am unable to overclock my phone from cyanogenmod settings. Min and Max values are just faded and i cant change them. Any Solution?
Have you flashed baseband xxxx15??? i didnt saw that in the steps you provided...
Steven87 said:
Have you flashed baseband xxxx15??? i didnt saw that in the steps you provided...
Click to expand...
Click to collapse
No, how to do this?? is there any risk of hard brick?
No just find the baseband file and flash it on flashtool
Sent from my X8 using xda app-developers app
i recommend to you to start from scratch, 2.1, root, flash baseband, install busybox, install CWM recovery, the full wipe and flash rom, you can flash the baseband with flashtool, and i think there is no risk, i have done it several times, the baseband xxxx15 is required to flash custom roms.
Jahanzaib Irfan said:
No, how to do this?? is there any risk of hard brick?
Click to expand...
Click to collapse
If you have installed gingerdx there is no need to flash baseband xxx15 because you already have it!
Sent from my X8 using xda premium
stamatis16 said:
If you have installed gingerdx there is no need to flash baseband xxx15 because you already have it!
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Why cant I overclock??
Jahanzaib Irfan said:
Why cant I overclock??
Click to expand...
Click to collapse
Did you flash the overclock module? If yes,use setcpu or similar apps to change frequency
I don't recommend overclock,but if you want it that much...its your phone after all...
Sent from my X8 using xda premium
Btw when you get all of that done you can do these steps to have better battery life
http://forum.xda-developers.com/showthread.php?p=19938469#post19938469
http://forum.xda-developers.com/showthread.php?t=942241
You stuck on Sony ...... logo because all new ROMS need to be installed from CWM and not from xRecovery :laugh:
Hi guys. Today I tried upgrading GingerDX from v030 to v031b but I mistakenly downloaded (and flashed) Alfs/nAa instead of Stock kernel.
Now the phone screen won't pass the Sony Ericsson boot scree... I can't find the key combinations to enter into CWM recovery menu. Is there any other way I can flash the proper ROM using Flashtool? I found this guide but I don't want to go back to the stock kernel (if possible).
Thank you!
You mean to. Say stock rom??
You are already on stock kernel...
& no other option you must follow that guide if you can't unlock bootloader!
see boot animation without rebooting
Gogeta said:
You mean to. Say stock rom??
You are already on stock kernel...
& no other option you must follow that guide if you can't unlock bootloader!
see boot animation without rebooting
Click to expand...
Click to collapse
Right, I already have the stock kernel, but I flashed Alfs/nAa ROM instead of the Stock one (from the download options) and now the phone won't pass the bootloader... Will try that guide since I can't enter CWM recovery using the key combinations I found
See the second post of the following thread
http://forum.xda-developers.com/showthread.php?t=1481630
stamatis said:
See the second post of the following thread
http://forum.xda-developers.com/showthread.php?t=1481630
Click to expand...
Click to collapse
He already stated that link in OP
see boot animation without rebooting
Gogeta said:
He already stated that link in OP
see boot animation without rebooting
Click to expand...
Click to collapse
Oops,my mistake, I didn't notice there were a link.
Ok, looks like there's no other way than going back to stock :crying:
Thanks anyway guys!
Re-flash back to stock 2.1, root, recovery and ROM again.
Sent from my LT26i using Tapatalk 2
Mistev said:
Re-flash back to stock 2.1, root, recovery and ROM again.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Yes,its not harder isn't it? really easy and fast way. you do this couple of times and you automatically capture the method easily
i unbricked my soft brick X8,root and install Xrec without guide for 4 times.that nice
sorry for my baddest english.
I re-installed 2.1 e15a stock kernel, then xRecovery and tried with 31b and 30 to no avail (SE -> GingerDX logo loop).
I can't figure out what I'm doing wrong...
Sent from my Galaxy Nexus using xda app-developers app
vazquezjm said:
I re-installed 2.1 e15a stock kernel, then xRecovery and tried with 31b and 30 to no avail (SE -> GingerDX logo loop).
I can't figure out what I'm doing wrong...
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
1. Use CWM to flash GDX!
2. Wipe dalvik cache that you forgot..
Sent from my E15i using xda app-developers app
Gogeta said:
1. Use CWM to flash GDX!
2. Wipe dalvik cache that you forgot..
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
Where can I downloadCWM? I couldn't find it and that's why I used xrecovery
Sent from my Galaxy Nexus using xda app-developers app
Will xtoolbox do the job?
It I'll be great if everything comes from one place instead of having to root using guide A, install CWM from guide B to end up using XDA's guide to install GDX. Just un idea, specially for noobs
Sent from my Galaxy Nexus using xda app-developers app
X8 toolbox gives almost everything
Sent from my E15i using xda app-developers app
Well, when I softbricked my X8, I never used my PC to unbrick it. I will just go into the recovery and flash a working rom. Problem solved..
But I can't figure out why he is sayig he can't go into the recovery. The button patterns remains the same no matter what rom you are on or what kernel you use. But I can be wrong.
Anyway did you do all these steps:
# Wipe Full System
# Wipe Cache, Dalvik-Cache
These steps are very important. But we often forget them.
Dude.....
Sometimes can't get into recovery while on stock kernel
Happened 3 times to me
Sent from my X8 using xda app-developers app
Maybe the op is downloading gdx for custom kernel...
dagger said:
Maybe the op is downloading gdx for custom kernel...
Click to expand...
Click to collapse
If he downloaded for custom kernel ...
he can't see the GDX logo
only 'Sony Ericsson'
Sent from my X8 using xda app-developers app
We dont see the sony ericsson logo on custom kernels..
it is seen only on stock kernel.
so there is a high possibility that op downloaded the wrong rom..
Gogeta said:
If he downloaded for custom kernel ...
he can't see the GDX logo
only 'Sony Ericsson'
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
if you use rom for stock kernel you can see the GDX logo...that is part of boot animation. alfs shows WLAN version not GDX. the Sony Ericsson logo is of stock kernel. so if you flash a rom for custom kernel you will still see that logo
it is possible (as dagger said) that OP downloaded rom for custom kernel.
Hi guys,
I am now stuck at finding a compatible CMW for my N7000SZLA2 Kernel. Does anyone know how to flash custom room without using CMW app or have a link to download N7000SZLA2 Kernel. Please help,
Thank you very much,
AnmiacAndroid said:
Hi guys,
I am now stuck at finding a compatible CMW for my N7000SZLA2 Kernel. Does anyone know how to flash custom room without using CMW app or have a link to download N7000SZLA2 Kernel. Please help,
Thank you very much,
Click to expand...
Click to collapse
Go to Here to read and find your answers. If you're still stuck, then ask again. Even though there a few custom roms that can be flashed through Odin, I suggest you avoid using it unless you want to flash stock firmwares.
How to upgrade my Note to 4.0 ? I check the update but nothing show up, I tried to using Kie but still nothing ? I searched this forum but It seem my phone don't have a change to upgrade.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
sangvu86 said:
How to upgrade my Note to 4.0 ? I check the update but nothing show up, I tried to using Kie but still nothing ? I searched this forum but It seem my phone don't have a change to upgrade.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Why would u choose 4.0 with all the emmc brick bug threat presents? Search the forum or google with the keyword "how to upgrade my N7000 from Gingerbread to Jellybean/ICS" n see what turns out.
Sent from my GT-N7000 using XDA Free mobile app
Here my system info. I rooted it successful by using kingo. How do I flash a JB room ? Do I need to flash kernel before flashing 4.1.2 room ?
Many thanks
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
sangvu86 said:
Here my system info. I rooted it successful by using kingo. How do I flash a JB room ? Do I need to flash kernel before flashing 4.1.2 room ?
Many thanks
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Hello. Firstly, I'm sorry to say that I don't have much experience as mine came directly from ICS. I can suggest a long roundabout way which is to update your android vers. from GB To JB through Odin procedure first, then just flash philz safe kernel. and then flash any roms u want. Or if you just want stock JB, then u can download stock JB firmware n flash it through odin.
Edit : Go Here And watch the video and read. The link for the kernel provided includes CWM. After Installing CWM, you can directly flash philz safe kernel, reboot to recovery, do a clean wipe and formats (Follow OP of the rom you want to install)