Related
In this thread I will try try to answer all of your questions that are retaining to the Samsung Captivate!
Ask away!
Sent from my SAMSUNG-SGH-I897 using xda premium
I just installed DLEV 5 and it doesn't have asian font support. Can't change the system locale to the korean. I was wondering how I could solve this problem
Languages have to be in the ROM or built to add to the ROM in a CWM flashable ZIP. I can't make that, sorry. ..
Sent from my SAMSUNG-SGH-I897 using xda premium
what steps do I have to take to go back to a froyo rom if i'm on a gingerbread ROM with at&t bootloaders
Well flash to stock using Odin one click
Sent from my SAMSUNG-SGH-I897 using xda premium
Which odin
erraz said:
Which odin
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731989
if you have a later build phone that came with froyo on it, odin one click may cause a bootloop. if that happens:
1.calm down
2. at the bottom of the op of the thread i linked there are links to other firmware packages usewd in the pda slot of full odin. get back into download mode and flash one of those.
Or you can just flash a froyo kernel with odin and then flash the froyo rom in recobery and keep the gb boots as they are backward compatible.
I just got my captivate. Before this all I have had is HTC Androids. It was already rooted and I put cm7 on it but I want to try other roms and I can't flash any other ROM. It just stays on cm7. How can I flash another ROM on here? I think I have the Froyo boot loader on it. I hope I don't have to use Odin because I only have a Mac and haven't been able to find Odin for Mac
Sent from my SGH-I897 using xda premium
bfinch said:
I just got my captivate. Before this all I have had is HTC Androids. It was already rooted and I put cm7 on it but I want to try other roms and I can't flash any other ROM. It just stays on cm7. How can I flash another ROM on here? I think I have the Froyo boot loader on it. I hope I don't have to use Odin because I only have a Mac and haven't been able to find Odin for Mac
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Have to use odin. Or Heimdall, idk if that works on MAC
Sent from my SAMSUNG-SGH-I897 using xda premium
studacris said:
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
Thanks I was gone for a while and didn't see that.
Sent from my SAMSUNG-SGH-I897 using xda premium
b-eock said:
Have to use odin. Or Heimdall, idk if that works on MAC
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
i think heimdall is cross platform, linux, windows, and mac
Yes it is! Should work!
Sent from my SAMSUNG-SGH-I897 using xda premium
b-eock said:
Have to use odin. Or Heimdall, idk if that works on MAC
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Heimdall works on MAC. Odin doesnt.
if you are going to be supplying answers to noob questions, please try and answer with actual knowledge rather than 'maybes'. your reply that someone needed to use ODIN one click could lead them to a bootloop, but you didnt think about that, did you? then you would be to blame for it when he comes crying back on the forum when hes freaking out about his phone not working after following your advice.
not trying to be rude, because i know you mean well, but you need to fully understand the captivate before you can open a thread like this.
Thanks for the quick answers. looks like I've got a project for today.
Sent from my SGH-I897 using xda premium
Pirateghost said:
Heimdall works on MAC. Odin doesnt.
if you are going to be supplying answers to noob questions, please try and answer with actual knowledge rather than 'maybes'. your reply that someone needed to use ODIN one click could lead them to a bootloop, but you didnt think about that, did you? then you would be to blame for it when he comes crying back on the forum when hes freaking out about his phone not working after following your advice.
not trying to be rude, because i know you mean well, but you need to fully understand the captivate before you can open a thread like this.
Click to expand...
Click to collapse
Hey dude I know what I'm talking about cuz he didn't mention that He had Mac not windows. Also if he did flash with odin it would only soft brick which is Totally recoverable, only hard brick would be flashing the 3 button fix, that would hard brick him.
Sent from my SAMSUNG-SGH-I897 using xda premium
I did mention that I only have a Mac
Sent from my SGH-I897 using xda premium
bfinch said:
I did mention that I only have a Mac
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Sorry wrong person my b
Sent from my SAMSUNG-SGH-I897 using xda premium
b-eock said:
Hey dude I know what I'm talking about cuz he didn't mention that He had Mac not windows. Also if he did flash with odin it would only soft brick which is Totally recoverable, only hard brick would be flashing the 3 button fix, that would hard brick him.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Soft bricks are recoverable, but what if he has the bad luck and his key combos dont work for what ever reason (it happend to me once) You just made that noob freak out and spend unnecessary time to make/ buy a jig when it could have been avoided. Don't get me wrong Im one that believes everyone should have atleast a jig.
And show a little more respect Pirateghost is a dev with 3,000+ post I think he knows more then us... Just saying.
I was about to say that i'm not
a noob. But I guess I am to Samsung. Lol.
I do know that if I mess my phone up its my fault. Trust me, I won't come back pissed at anyone.
But thanks again for the help!
Sent from my SGH-I897 using xda premium
Din't mean anything against you.
I am generally new (noob) if you will to dev for androids. I am rooted, over clocked, add free and other thing but what I haven't tried yet is getting new roms, kernels, etc. I would like to learn these functions so I can upgrade my phone. Does anyone have and material, websites, etc. on flashing or installing different roms that I.can look over to learn about the process and how to do it exactly? Any help would be appreciated. Thanks.
Sent from my LG-P925 using xda app-developers app
I can't imagine how your over clocked if u haven't flashed a different kernel. Anyways look around the general section, you may have to dig alittle but all the info your looking for is here.
Sent from my LG-P920 using xda app-developers app
akwhite23 said:
I can't imagine how your over clocked if u haven't flashed a different kernel. Anyways look around the general section, you may have to dig alittle but all the info your looking for is here.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
You can use stock kernel and overclock at the same time.
I finally tried it last night but I.got stuck in a loop I believe.. I tried flashing thriller.. lucky I installed cwm recovery and had backed up my last phone. When I flash a.new Rom do I have to return the phone to factory settings? The tutorial I was using was for the old version on cwm recovery and didn't translate to the new one so I basically had to make an educated guess.
Sent from my LG-P925 using xda app-developers app
This is exactly what I did. I installed cwm recovery. I.backed up my phone. I downloaded the thriller zip. Connected my.phone to computer and cut and pasted the thriller zip folder onto my SD card. I booted in cwm recovery. And clicked install from SD I found the thriller Rom and downloaded it. Once it was done I clicked re booted normally and when I did this it only showed a bunch of colors coming.g together into and x and did that for 10 minutes until I booted into cwm recovery again and restored from my latest back up. Anything I did wrong or didn't do? Any help would be appreciated.
Sent from my LG-P925 using xda app-developers app
Yeah, I didnt figure he knew how to configure an overclock module asking all those questions.
---------- Post added at 01:25 AM ---------- Previous post was at 01:23 AM ----------
Not quite sure what your asking but yes if i was you when you flash a knew rom do three wipes, factory,cache,davik. if you dont it could cause boot issues.
akwhite23 said:
Yeah, I didnt figure he knew how to configure an overclock module asking all those questions.
---------- Post added at 01:25 AM ---------- Previous post was at 01:23 AM ----------
Not quite sure what your asking but yes if i was you when you flash a knew rom do three wipes, factory,cache,davik. if you dont it could cause boot issues.
Click to expand...
Click to collapse
Extremely unnecessary wipes.
Factory reset does these three things.
Wipes /data
Wipes /cache
Wiping dalvik-cache is useless in a factory reset as "dalvik-cache" is stored in "/data".
OK so from your experience am I doing it right except for the factory wipe? Or are the wipes unnecessary? Thanks for the print responses too!
Sent from my LG-P925 using xda app-developers app
Its important to know what version software your running. I believe the thriller rom only works on android software version 2.2 aka froyo. If your phone is running 2.3 gingerbread that would be the reason why the rom didn't work. Check in settings>aboutthisphone>androidversion to see which software you've got. I'm relatively new to all this also but I hope I helped
Sent from my LG-P925 using xda premium
ANdroid1AC said:
OK so from your experience am I doing it right except for the factory wipe? Or are the wipes unnecessary? Thanks for the print responses too!
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
I'd suggest always doing a wipe when going from ROM to ROM.
This is how I do my wipes.
NANDROID current ROM
Flash new ROM
If I even see one force close, I factory reset.
@lestat.. but when I do wipe it.. doesn't it wipe the SD card too? Like when I hit factory settings does it clear SD as well?
Sent from my LG-P925 using xda app-developers app
ANdroid1AC said:
@lestat.. but when I do wipe it.. doesn't it wipe the SD card too? Like when I hit factory settings does it clear SD as well?
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure on that as I always use ClockworkMod to factory reset.
It doesn't touch your SDcard.
Sent from my Samsung Galaxy S II w/ DUAL BOOT: AOKP / MIUI
@twin.. I'm running gingerbread so what's a good Rom to run with 2.3.5? @ lestat.. OK cool then ill try it through CWM.. thanks man
Sent from my LG-P925 using xda app-developers app
ANdroid1AC said:
@twin.. I'm running gingerbread so what's a good Rom to run with 2.3.5? @ lestat.. OK cool then ill try it through CWM.. thanks man
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
You'll have to try the ROMs for yourself. I can't say for myself as a dev.
I personally like thrill seeker. The original developer had to give up on it because he's been busy, but another dev (Bdadd34) has picked it up and is continuing to work on it. I like it because its stable and very simple to flash and I don't have to flash to a different baseband (which I've never tried). Also from reading on here for a while I know lestat's acidhazard rom is a favorite among most not only for the thrill here in the US, but also for a lot O3D users. His is a rom kitchen so you pretty much build the rom with features you want. its still a little over my head but lestat has a great reputation on here for being super helpful. I'm sure he'd explain it much better or just check out his website which I'm sure a link is in the post for his rom.
Sent from my LG-P925 using xda premium
I'm using Dark's acidhazard rom with acura's beast 1.3 extreme low voltage kernel. I have no complaints and the support from dark is incredible. I'm on v20p too and I haven't experienced any ghost calls yet. *knocks on wood* I would definitely recommend acid hazard..
Sent from my LG-P920 using xda app-developers app
I tried to flash thrill seeker to it but it put my phone in a loop so I don't know what's going on.. I don't think I know enough yet. Any suggestions. Play by play would be nice.
Sent from my LG-P925 using xda app-developers app
ANdroid1AC said:
I tried to flash thrill seeker to it but it put my phone in a loop so I don't know what's going on.. I don't think I know enough yet. Any suggestions. Play by play would be nice.
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
You need to go into cwm using the 3d volume down and power button combo when you see of symbol let off power button then once in cwm recovery then you need to do a factory reset then reboot phone that should fix your problem
Sent from my LG-P920 using xda app-developers app
Lg Thrill (p925) on tmobile network v10e ROM HELP
hi everyone.. i was wondering could anyone tell me which roms i could flash on my stock 2.2.2 v10e lg thrill 3D? i liked CM 7.2 but no baseband... i tried a few methods posted around the site here but jus keep gettin bricked and looped at startup screen..thanks goozeness for CWM lol...thanks in advance
oh and probably dumb to ask since all leads have pointed me to a hell NO
but can i get 3g/4g on my thrill using tmobile?? i know smack me now lol but i ran into what someone called "the golden ticket" and when i d/l the zip to my sd whether its internal or external sd.. i cant find it in CWM mode to flash it.
wayno140 said:
You need to go into cwm using the 3d volume down and power button combo when you see of symbol let off power button then once in cwm recovery then you need to do a factory reset then reboot phone that should fix your problem ..
Thanks man but when you factory reset does it clear ur external SD card?
My other question is when I copy n paste it zip file containing the ROM to my phone should it be on internal or external?
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
A friend tried messin around with his tab when he doesnt even know how to jailbreak an iphone 3g... The tab wouldnt even boot past the Samsung Galaxy Tab screen, but it was able to get to download mode... I used a guide to update it to gingerbread using odin, and everything went well! I opened odin, selected PIT and chose the P1_add_hidden.pit file, then i selected PDA and chose the P1000NVFJP6_P1000NUBJP3_P1000NUUBJPB_HOME.tar.md5 file, and i made sure i checked Re-Partition, Auto Reboot, F. Reset Time, Phone EFS Clear and Phone Bootloader Update.. everything went well, but on recovery it was unable to update the systemfile.. but everything else on recovery updated and installed fine! as it reboots, it gets stuck in the bootanimation in the part it says Samsung glowing.. did i do something wrong? how can i fix this? I am still able to get to recovery and download mode fine..
Use overcome method like described here
http://forum.xda-developers.com/showthread.php?t=1855591
Btw, you should not have checked Clear Efs.
The replace bootloader too.
And best to use Odin 1.7 included in the gb stock safe in that link I give you.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Use overcome method like described here
http://forum.xda-developers.com/showthread.php?t=1855591
Btw, you should not have checked Clear Efs.
The replace bootloader too.
And best to use Odin 1.7 included in the gb stock safe in that link I give you.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
thanks! will check this out now!
Why do some people think its rational to use absolutely ridiculous titles like "hlp plz" etc etc??
Please use common sense and use descriptive titles, ie a short title that describes your topic for people browsing the forum. "help plz" does not describe your topic in absolutely any way other then somebody using a completely generic title.
priyana said:
Use overcome method like described here
http://forum.xda-developers.com/showthread.php?t=1855591
Btw, you should not have checked Clear Efs.
The replace bootloader too.
And best to use Odin 1.7 included in the gb stock safe in that link I give you.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
hey! i just wanted to thank you, i did it all and the tab finally booted and is working perfectly!! i forgot to reply about it cause i was so busy with college... but yeah thanks again bro u saved my rep and my friend's tab xD
You a describing your friend to be a noob. Why are you yourself a developer? And do you even know the hard work required to develop a jailbreak for the first time? So don't talk about others' ignorance.
Sent from my GT-P1000 using XDA Premium HD app
In the mood for spamming threads eh, Gogol?
Sent from my GT-P1000 using xda app-developers app
gogol1996 said:
You a describing your friend to be a noob. Why are you yourself a developer? And do you even know the hard work required to develop a jailbreak for the first time? So don't talk about others' ignorance.
Sent from my GT-P1000 using XDA Premium HD app
Click to expand...
Click to collapse
Got a personal or emotional problem bro? Dnt care about it, he did something stupid instead of letting me root it for him and I just described wt he did, no need to get all *****y... Plus I already fixed it, so fk off mod plz close thread
V1P3R-X
[Q] is CM10 ready to use by normal user or still under construction ??????
Sent from my GT-N7000 using xda premium
azaza852 said:
[Q] is CM10 ready to use by normal user or still under construction ??????
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
still under construction. as of right now you have to build it yourself, although nrvate may be releasing something depending on how stable it can become.
azaza852 said:
[Q] is CM10 ready to use by normal user or still under construction ??????
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Its stable now check it out.
Sent from my SAMSUNG-SGH-I957 using xda premium
Thank u for your reply
& I have a request from u
I want a full steps to instal it from A to Z because i am a normal user not dev
& i will be grateful for u
Sent from my GT-N7000 using xda premium
Up up up
Sent from my GT-N7000 using xda premium
Use TWRP
azaza852 said:
Up up up
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hey you need to get TWRP installed and then you should be good from there. Find the TWRP forum back a page then follow the instructions there. If you have never flashed a recovery before there are really good instructions in the CWMR thread. You might try flashing CWM first if you are a noob (I used CWMR for a while and it's a great recovery too) . Basically you need to get odin, and the adb drivers for your device. Turn your device off and put it in download mode (Power button and both volumes, then release power once it vibrates). Have odin ready with your custom recovery in the PDA slot. Once your device plugged in and in d/l mode odin will recognize it (if not you did something wrong).
pussyliquor said:
Its stable now check it out.
Click to expand...
Click to collapse
Depends on what you mean by stable. While most features seemed to work okay, for me video play-back was horrible. Videos skipped and lagged. Since video playback is a major thing for me it's a deal breaker as it stands. I hope it in the future it gets fixed. Other than that though.. all was good with it
Hi all. Ii have a 4G I9305T and want to root it but don't have access to my pc is there away to do it via my mobile ?
Sent from my Galaxy S3 4G
aussiesausage said:
Hi all. Ii have a 4G I9305T and want to root it but don't have access to my pc is there away to do it via my mobile ?
Sent from my Galaxy S3 4G
Click to expand...
Click to collapse
Depending on the firmware version, ExynosAbuse should do the trick (http://forum.xda-developers.com/showthread.php?t=2050297).
I got DVALI6 so would be safe? I dont want to end up with a dead phone.
Sent from my Galaxy S3 4G
So it worked and phone still working so now I have to back up everything so I don't kill my phone.
Edit: now how do I get custom recovery on my phone I can't find anything?
Sent from my Galaxy S3 4G
Is there away to install cwm with my phone now ? I downloaded ripper Rom 651mb! Can't install it until I have cwm though
Sent from my Galaxy S3 4G
Do a little more search then just asking laying on your back.
Anyway look for threads in the development section.. there is a few topics that would help you. The titles are self explainatory.
A little digging is good.. then you will learn in deapth and perhaps solv a few things your selfe.
Good luck
Sent from my GT-I9305 using XDA Premium HD app
tissot said:
Do a little more search then just asking laying on your back.
Anyway look for threads in the development section.. there is a few topics that would help you. The titles are self explainatory.
A little digging is good.. then you will learn in deapth and perhaps solv a few things your selfe.
Good luck
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
I did search but can't find one explaining how to do it via phone. Funny how people praise the search button and it barely helps.
Sent from my Galaxy S3 4G
Sorry.. dont want to be rude.
But if you read a little more in the forum you will ensure you dont destroy your phone soon.
The easy way then:
1: Buy mobile odin from play or find the creators xda thread and download for free
2: Go to http://forum.xda-developers.com/showthread.php?t=1914394
Download I9305_CWM_Recovery.tar.md5 to your phone.
3: run mobile odin from your phone.
In mobile odin, scroll down a bit and chose "Open file..." choose the sdcard you downloaded the file to. Now brows to the prev. downloaded file I9305_CWM_Recovery.tar.md5 and run. Dont check any boxes.
Done
But if you want to understand the deapth of the dangers you could encounter and prevent , check this thread from xda:
http://forum.xda-developers.com/showthread.php?t=1967124
All links are from xda.
Sent from my GT-I9305 using XDA Premium HD app
You can get mobile odin and flash either cwm, philz or twrp recovery with it. Just make sure you download the .tar file. Once that's done you will have a recovery you can flash zips in
Sent from my GT-I9305 using XDA Premium HD app
Thanks very much for all the help
Sent from my Galaxy S3 4G