Related
So far, this is going to be a guide for noobs. Please read through this, and ask any questions that you have. This has been compiled from different guides around XDA, and information has been stripped that does not relate to our phones. More will be put up here when I find it, and all credit will be provided. This will be from 'duh' to 'didn't know that'. The idea is to provide a beginning to end explanation: Stock Incredible to Rooted with custom Rom.
Topics so far - ADB, Rooting (reflash), Unrooting, Nandroid, Remove/Install Apps, roms, kernels...
I'M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE DOING ANY OF THIS.... REGARDLESS OF WHY. Yadda, yadda, yadda...
**********At this point, I'm going to ask that you uninstall HTC Sync. Also, please uninstall HTC Driver... (whatever it's called) Nobody likes them (really though, it will mess up a lot of things. You can install them later when all this is done).**********
1) Setting up ADB
ADB stands for Android Development Bridge. It is used by Android developers for programming. For us, it is used to hack into our phones . For our purposes, just know that it is like the cmd (command prompt) that allows us to send commands to our phone. This is extremely useful when we're in the custom recovery
Download the Android SDK from Google: http://developer.android.com/sdk/index.html
Unzip to your desktop
Take the "android-sdk-_**-windows" folder and move it to the root of your hard drive (C:\)
** will change, it is revision of SDK, like "r6"
****The below is not necessary, but is useful sometimes if you just want to run "adb shell" from anywhere without going into the sdk directory****
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista/Windows 7)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-_**-windows\tools
****End of the "This is not necessary thing****
Now, we get USB drivers to work. Some use HTC Sync for drivers, however HTC Sync does not like to play nice with the reflash tool (later on this), so we will use the generic google USB drivers.
1. Run SDK Setup.exe
2. If it gives you any error go to settings and click on "Force http//....."
3. Select usb driver package, let it download and install
4. Some say the below step is not needed, but I did this so I'm posting it
Go to tools folder, and edit "android_winusb.inf" (you can do this by opening it via wordpad). Add the following at the end of the [Google.NTx86] and [Google.NTamd64] blocks:
;HTC Incredible
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9E
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9E&MI_01
%SingleBootLoaderInterface% = USB_Install, USB\VID_0BB4&PID_0C94
Save the file and exit.
5). Plug your phone into PC, when windows asks to install drivers for new found hardware, point the New Hardware Found wizaed to android_winusb.inf that you just edited.
============================================================
2) Preparing your phone for ADB
Go to Settings on your phone
Select Applications
Select Development
Make sure 'USB Debugging' is checked
============================================================
3) Check if your phone is detected by ADB
Open up Command Prompt (Go to run, type in cmd, press enter)
Type in:
cd C:\**your sdk name**\tools (Press Enter)
adb devices (Enter) You should see your device listed
adb shell (Enter) you should see $ in the next line
**After you obtain root**
su (Enter) you should see # in the next line if you are already rooted
**you may need to allow adb shell to run as root. Look at the phone and see if Superuser.apk is asking for your permission to allow adb root access. Click on "Remeber my selection" and select yes.
Now you are all set to run adb commands as root or as a regular user
**Note: for a list of commands that you can type using adb type "adb" in cmd
All Credit for Topics 1 - 3 go to user XDA member nephron. I mostly copied all of his guide, but updated some information on it to make sense for our phones. Also, removed some stuff I didn't see necessary. Please go to the original thread for the G1: http://forum.xda-developers.com/showthread.php?t=532719&highlight=nandroid+guide for a list of further Credits, and for information I've left out. If you like this thread, please donate to HIM
============================================================
4) Rooting your phone - READ THIS WHOLE SECTION BEFORE GOING TO ANY EXTERNAL LINKS PLEASE. At this point, running the UnrEVOked reflash3 tool will root your phone and install a custom recovery. To try to make it really easy to understand, recovery allows you to access your phone to make PERMANENT changes (something we can't do while booted yet), flash custom roms, and save your sorry little @$$ if you do something that you weren't supposed to
Ok, at this point, I'm going to ASSUME that you don't have HTC SYNC installed (or uninstalled it), and that you have the Google USB drivers installed (i.e. you read at least some of this post). The first thing we're going to do is:
1) Read this: http://forum.xda-developers.com/showpost.php?p=6875912&postcount=1
2) If you read #1, you already went here: http://www.unrevoked.com/rootwiki/doku.php?id=public:windows_hboot_driver_install
and downloaded the MODIFIED (i.e. changed, not the same, DON'T SKIP THIS STEP) driver and installed it
3) If you read #1, you already downloaded the reflash tool executable
4) If you read #1, you've already done #2, and 3, and this is just a worthless step of me explaining how important it is that you did #1
5) Lets do this. #1,2,3 and 4 were "get ready" steps. By now, you installed the modified driver, went to the webpage and downloaded the UnrEVOked3 reflash tool. HTC sync is also uninstalled. Plug in your phone (normally booted) to your pc and select "Charge Only" when asked how to connect to PC, and click on "remember my selection". Click Done.
6) Unplug Phone from PC.
6a) If you have double twist installed, at this time open the task manager on your pc, and kill doubletwist.devicehelpder....
7) Run the "reflash_package" executable that you just downloaded. Notice the path that it lists and click "install". This will unzip "reflash.exe" and a bunch of other stuff that is needed to the directory that you just noted. Go to this directory (usually the same one where the executable you just ran is) and run "reflash.exe"
8) Plug in your phone.
9) When the program is finished, you should see koush's clockworkmod recovery on your phone's screen and reflash will say that it's done. Congrats, you have root and a new recovery.
If something went wrong, and you're not on koush's recovery and reflash says it's done, don't worry, just re-run reflash. You can run it as many times as necessary. It will not hurt anything AT THIS TIME (this may change later)
10) Koush's recover works a little differently:
a) Vol+ and - scroll up / down
b) the Power button work as a "Back" button, and will turn off screen if you're at the root of the menu. If your screen goes blank, don't read, just hit Power again
c) To make a selection, click the optical trackpad
11) Reboot your phone by highlighting the selection and choosing it
For the most part, these instructions were written from memory, but all credit goes to UnrEVOked, Shadowmite, and anyone that they've given credit to in original links.
============================================================
5) Unrooting - I didn't want to re-invent the wheel, so I'm posting an external link:
http://androidforums.com/all-things...ideo-howto-unroot-incredible-downgrading.html
Just follow the instructions. Credit goes to the OP. If this link ever goes to a 404, pm me and I will find another link with instructions and update this. Also, if you don't understand something, just ask in this thread, someone will answer (maybe even me ).
============================================================
6) Whats is a Nandroid Backup?
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
Nandroid Backup is a tool allowing your Incredible that has koush ClokworkMod Recovery to create a full system backup and restore it, which, when flashing and testing different roms can be very useful.
A) Creating a Backup using Nandroid
Boot up your phone in recovery (Turn off, then turn on while holding Vol- and Power. Press Vol- once to highlight recovery, hit Power once to go into it)
You will now see your new koush recovery
Scroll down (Vol -) to "nandroid" and select it (press the optical button in)
"Backup" will be highlighted. select it
Let it work, it might take a while for a full system backup
Once its done, your backup is complete and is saved on your sdcard in the "clockworkmod" folder. Normally it's stored in the "nandroid" folder, however our Recovery does things a little differently.
B) Recovering to Your Nandroid Backup
Make sure u made a backup and its in the clockworkmod folder on your sdcard
Boot up your phone in recovery (Explained Above)
Go into "nandroid" in the recovery (also explained above)
Select "restore backup" and select from the backups you have (if you have multiple) that you want to restore; this will do a simple, "restore all" of your latest nandroid backup
:OR:
Select "Advanced Restore", choose from the backups that you have on your SD card, and then what you want to restore. You can individually restore "system", "data", "cache", etc....
In "Advanced Restore", i have not seen a way to restore multiple options (cashe AND system, etc...) Koush, am I missing something?
Let it work
Once its done, restore more options through the Advanced Restore menu, or reboot your phone and your selections will now be restored!
============================================================
7) Remove Apps
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
1) Go into Clockworkmod Recovery (With phone turned off, Vol - + Power, then Vol - to select recovery, then hit Power)
2) Select "partitions" from menu, then select "mount sytem" You can also "mount sdcard" if you want to back apps up to sdcard
3) Connect Phone to PC
3a) Open a command prompt and navigate to your sdk\tools directory
3b) Type: adb remount (it shoud return successful)
4) Open Adb Shell on your pc (Type: adb shell)
It should automatically show #, otherwise type "su"
Type:
cd /system/app (enter)
5)Type ls (this will show you all of the stuff in the /system/app directory)
6) To "delete" apps, type the following:
/system/bin/mv Your_APP.apk Your_APP.apk.bak (i.e. CityID.apk CityID.apk.bak). If you want to clear up space on your internal storage for whatever reason, you can replace Your_APP.apk.bak with /sdcard/Your_APP.apk.bak (this will move the app to the root of your SD Card instead of just change it's name)
If you don't get errors, you're done.
*This does not delete apps, but changes their file type so they will not show up as an app, in case you want to get them back at any time later you still have them and don't have to frantically post threads on XDA asking for them.
============================================================
8) Install Apps to /system/app
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
1) Place your app you want to install into the root of your sd card (this is easiest)
2) Go into Clockworkmod Recovery (Explained in 7)
3) Mount system and sdcard under partitions (Explained in 7)
4) Connect Phone to PC
4a) adb remount in command prompt (should sow successful) (again, in 7)
5) Open Adb Shell on your PC
6)
IF NOT at #, type "su" to go from $ to #.
Type:
/system/bin/mv /sdcard/Your_App_Name.apk /system/app/Your_App_Name.apk
7) If you don't get errors, you're done. You can unplug phone, and reboot
============================================================
9) Flashing Custom Roms
Download a ROM that you want to try. One of the roms from here are a good starting point: http://inc.sodpit.com/. They are mostly stable might get a few random reboots.
Steps:
1. Download Rom of your choice
1a. Right now, there might be two ROM types, a nandroid backup and an update.zip type file. For right now, I recommend sticking with the update.zip kind. These instructions are meant for it, but I just want you to make sure you know which type it is before you try to flash it.
2. Copy and Paste the downloaded file onto sdcard. Make sure it is not in any directory's of SD card, just on the sdcard (the "root" of it).
3. Verify it's there using Astro or some other File Manager just to be safe.
4. Download and Run Titanium Backup from the Market if you haven't already. (If you don't have it, get it, it's must have for root users.)
a. Select Menu, Batch, Backup user apps. (in Titanium Backup)
b. let it run, this will take some time.
5. When that's done open your command prompt, navigate to your sdk\tools directory, and type "adb reboot recovery" (Not within adb shell, but in command prompt in that directory. I'm not going to explain how to do this because it's already explained above. Also, if you're flashing roms then you're already familiar with it, or maybe you shouldn't be flashing roms ).
6. Do "Wipe data/factory reset" and "wipe cache partition" in Recovery **This WILL WIPE your phone**
7. Select "install zip from sdcard", then select "choose zip from sdcard", then select the name of the zip you want to install.
8. When that's done reboot your phone, once your done setting up all the settings, download titanium backup from the market again, and set that up.
9. In Titanium, Select Menu, Batch, Restore User apps.
After that's done you'll have all your apps that you had before, data included, with a fresh new rom to try out. Hope this helps!!
All credit for these instructions goes to tcbert2010, they were suggested to me, and I liked them. I modified them a BIT, so they make more sense to me and hopefully to you. See post #2 in Original Thread = http://forum.xda-developers.com/showthread.php?p=6953608#post6953608
============================================================
10) Installing custom kernels
I'm only mentioning Hydra's kernels. I'm running the Undervolted, NOT overclocked kernel with wireless N to preserve my battery to get more life out of it
**Taken from website's FAQ**
Q: So how do I install the kernel?
A: First step is to either download the kernel zip file straight to your phone, or download it onto your computer and put it on the sdcard of your phone. Next you turn the phone off hold volume down and power at the same time. When the phone is in HBOOT wait a few seconds for it to initialize then hit volume down once and then power to boot into Clockwork recovery. Once in clockwork recovery you want to select "Install zip from sdcard", then "Choose zip from sdcard". You will now see a listing of files on your sdcard select the kernel zip you downloaded, or if you downloaded strait to your phone go to the Downloads folder and select the kernel zip file. The kernel will now install to the phone and once it's done it will say install complete. Now you can hit the power button once to return to main menu and select "reboot system now" . Your phone will now reboot with the new kernel.
***
Go to: http://hydrakernel.net/ to download the kernels
Please read: http://hydrakernel.net/faq.htm to educate yourself. It's worth it.
Credit to EJHEART for the wonderful kernels! Where are my 2.2 kernels EJ ?
============================================================
Again, if you have suggestions, requests, or whatever please post or PM me.
PM Me if I missed giving someone credit. PLEASE!!!
reserved
reserved for future.
Reserved
reserved for future
Great thread topic... reserved for future use
Updated
Updated with Reflash instructions.
dreamersipaq said:
Help I'm stuck at waiting for system to settle
check these common issues:
- You switched your driver to the one from this post? It's NOT identical to the SDK one.
- You don't have any usb applications that might be taking focus while we are working with the phone right?
- Is the SD card present in the device?
- You did give su permenent access when you allowed it in superuser right?
More to come...
Click to expand...
Click to collapse
Good start, iPaq! I just want to plug Linux AGAIN. I had zero problems using reflash for linux and using Gparted in Ubuntu/Debian/Linux Mint mint means one can do all kinds of things that will become helpful very soon if not already (e.g., manipulate ext and swap partitions on the sdacard!). Aside from linux being Android's native file system, using a Linux distro just makes 110% good sense if you plan to do any developing for the DI/Android. Why poeple struggle so much with Windows when Linux is free is beyond me
2 cents deposited!
Additional items to add
1) After I have rooted and reflashed - How do I flash new ROMs
2) After I have rooted and reflashed - Is there an easier way to get back in and get rid of CityID, etc?
3) How do I update to a later version of ClockworkMod
Great topic
Sent from my ADR6300 using XDA App
...
jdmba said:
1) After I have rooted and reflashed - How do I flash new ROMs
2) After I have rooted and reflashed - Is there an easier way to get back in and get rid of CityID, etc?
3) How do I update to a later version of ClockworkMod
Click to expand...
Click to collapse
1) - Will update soon
2) - I BELIEVE that this works:
1) Go into Clockworkmod Recovery
2) Mount Internal Storage under partitions
3) Connect Phone to PC
4) Open Adb Shell on your pc
Type:
su (will change to #)
cd /system/app
mv CityID.apk CityID.apk.bak
you're done.
Not in front of my phone at this sec, but if mv does not work, try
busybox mv CityID.apk CityID.apk.bak or
/system/bin/mv CityID.apk CityID.apk.bak
*This does not delete it, but changes the file type so it will not show up as an add, in case you want to get it back at any time later.
If I'm wrong please correct me.
3) The easiest way to update recovery at this time is through Koush's Rom Manager. However, at this time I've read somewhere that it's not persistent. Let's give this a few days.
Updated
First Post Updated.
here is my problem, apparently when I got root I didn't push superuser.apk as a system app correctly.
SO, I have root in the OS after each boot, once I install superuser.apk.
Problem is, I can't get back in recovery to fix this. I have gotten into recovery with ADB again (maybe twice in the 2000 times I have tried again), but when I get to the step where you do the update and push the zip file at the same time, it never works now. So I am unable to push the apk as a system file.
So, the unrevoked recovery flash fails because it doesn't have su rights when it gets to the os on reboot.
Anyone want to help me out?
qwho said:
here is my problem, apparently when I got root I didn't push superuser.apk as a system app correctly.
SO, I have root in the OS after each boot, once I install superuser.apk.
Problem is, I can't get back in recovery to fix this. I have gotten into recovery with ADB again (maybe twice in the 2000 times I have tried again), but when I get to the step where you do the update and push the zip file at the same time, it never works now. So I am unable to push the apk as a system file.
So, the unrevoked recovery flash fails because it doesn't have su rights when it gets to the os on reboot.
Anyone want to help me out?
Click to expand...
Click to collapse
Take this opportunity to flash up to HBOOT 79, wipe, and re-root. Start fresh. Re-reflash w/unrevoked2. Alles in Ordnung! At least, that solved all of my problems. Start with the big headache to avoid later headaches. Once you have a nandroid of a "proper" root, you'll never have to do the annoying initial root again.
So you can get HBOOT 79 how? by flashing the latest HTC rom RUU?
qwho said:
So you can get HBOOT 79 how? by flashing the latest HTC rom RUU?
Click to expand...
Click to collapse
Exactly. Doing will wipe out all userdata, everything not stored online, on your card, or on internal disk. It's really the best way to go, to start fresh and remove all the little variable piecemeal rooting has placed in your path to date.
can you point me to the RUU you would use? I did some searching, here and at htc.com, and I couldn't find an RUU anywhere.
qwho said:
can you point me to the RUU you would use? I did some searching, here and at htc.com, and I couldn't find an RUU anywhere.
Click to expand...
Click to collapse
Just down this, run it in Windoze, and before it tries to flash (you don't need your DI connected!), go into your AppData/temp directory, find the ~142mb rom.zip file, rename it to PB31IMG.zip, put it on /sdcard root directory, boot into bootloader, let the card/file get picked up while holding down-volume, ok the flash, no need to ok the reboot, then boot into to recovery and proceed with adb shell/rooting process one
I've been having some trouble with the nandroid step, and creating a backup. I've done everything listed prior to that with success, but when I load into recovery I don't see the option to create a nandroid backup. I have also dl'ed RomManager and have tried to create backups through that.
I also dl'ed the unrevoked reflash and tried running that, but that also fails. I'm not really sure what I'm doing wrong, so any help wold be appreciated!
sanchagrins said:
I've been having some trouble with the nandroid step, and creating a backup. I've done everything listed prior to that with success, but when I load into recovery I don't see the option to create a nandroid backup. I have also dl'ed RomManager and have tried to create backups through that.
I also dl'ed the unrevoked reflash and tried running that, but that also fails. I'm not really sure what I'm doing wrong, so any help wold be appreciated!
Click to expand...
Click to collapse
Not sure what you mean. Go into Hboot, and select recovery. When Koush's recovery loads, use Vol- to highlight "nandroid". Click the optical button in, and you'll enter another menu. Select the first option, which should be highlighted by default, which should be "Create Backup" or "Backup Device" or something like that.
Let me know if that works.
When I go into recovery the only options I get are:
Reboot System now
Apply sdcard: update.zip
Wipe data/factory reset
Wipe Cache partition
----------------------------------
E:Can't open /cache/recovery/command
Click to expand...
Click to collapse
I'm not seeing anything about nandroid backup. I'm assuming I'm either not doing something correctly (I'm currently not booting into recovery while running reflash.exe) or somehow the clockworkmod isn't correctly installed.
Any ideas? Or what other information could I give you to help better answer my question?
sanchagrins said:
When I go into recovery the only options I get are:
I'm not seeing anything about nandroid backup. I'm assuming I'm either not doing something correctly (I'm currently not booting into recovery while running reflash.exe) or somehow the clockworkmod isn't correctly installed.
Any ideas? Or what other information could I give you to help better answer my question?
Click to expand...
Click to collapse
You can't install anything to recovery that will stick until you get root via procedure 1, then reflash with unrevoked 2. Sounds to me like you've gotten ahead of yourself
Slight issue here, not sure if anyone has had it before.
Just acquired a Captivate as an xmas gift to myself (sick of that iPhone), and began the whole process of getting a new ROM onto it. Rooted, installed ROM Manager, flashed a clockworkmod recovery (2.5.1.2), and hit "Backup Current ROM".
The device reboots into the standard recovery mode with the usual options (reboot system now, reinstall packages, delete all user data, delete cache data).
No backup is made, and I just have to continue the reboot. I've tried flashing to an older version, clearing the download cache, and using the option to go to ROM Manager's recovery mode (just takes me to the default recovery boot).
Am I doing something wrong here? I followed all of the instructions step by step.
Velshtein said:
Slight issue here, not sure if anyone has had it before.
Just acquired a Captivate as an xmas gift to myself (sick of that iPhone), and began the whole process of getting a new ROM onto it. Rooted, installed ROM Manager, flashed a clockworkmod recovery (2.5.1.2), and hit "Backup Current ROM".
The device reboots into the standard recovery mode with the usual options (reboot system now, reinstall packages, delete all user data, delete cache data).
No backup is made, and I just have to continue the reboot. I've tried flashing to an older version, clearing the download cache, and using the option to go to ROM Manager's recovery mode (just takes me to the default recovery boot).
Am I doing something wrong here? I followed all of the instructions step by step.
Click to expand...
Click to collapse
Try doing "reinstall packages".
Steps:
1. Copy the clockwork recovery "update.zip" attached to this post to ur sdcard root.
2. Reboot to recovery.
3. Select "reinstall packages".
4. It would say something like replacing recovery with clockwork recovery, and reboot into recovery. This happens only the first time u use this.
5. Select "reinstall packages" again.
6. You should be in clockwork recovery.
diablo009 said:
Try doing "reinstall packages".
Steps:
1. Copy the clockwork recovery "update.zip" attached to this post to ur sdcard root.
2. Reboot to recovery.
3. Select "reinstall packages".
4. It would say something like replacing recovery with clockwork recovery, and reboot into recovery. This happens only the first time u use this.
5. Select "reinstall packages" again.
6. You should be in clockwork recovery.
Click to expand...
Click to collapse
Good deal. Worked perfectly. Out of curiosity, do we know why the phone was doing this?
Velshtein said:
Good deal. Worked perfectly. Out of curiosity, do we know why the phone was doing this?
Click to expand...
Click to collapse
Ok. I'll explain to the best of my knowledge.
The zip I gave u is the most non-intrusive way of CWM. No ROM manager installer is needed on phone apart from placing this zip on sdcard root.
When the phone boots up, it loads the default recovery console. When we select "reinstall packages", it loads "update.zip" on the sdcard root by default. Since the update.zip we have there is the CWM zip, it loads it therby loading CWM console.
If u don't want CWM, just delete this update.zip.
Hope this helps.
I have this exact same issue ROM Manager is doing nothing but rebooting into recovery. So if I use your workaround, I need to keep this update.zip file on my device at all times?
NISMOFO said:
I have this exact same issue ROM Manager is doing nothing but rebooting into recovery. So if I use your workaround, I need to keep this update.zip file on my device at all times?
Click to expand...
Click to collapse
Yes best to do so
All ROM Manager does is download the update.zip that was posted and put it on your SD Card. The other steps need to be done regardless.
MikeyMike01 said:
All ROM Manager does is download the update.zip that was posted and put it on your SD Card. The other steps need to be done regardless.
Click to expand...
Click to collapse
I got the ROM backup working. I guess I was too impatient the first time. I cleared/moved a lot of stuff off my internal SD card too....doubt that it mattered.
But it works quite well.
I initially looked for a complete update guide on here and eventually found all the information I needed, but it was in multiple places and sometimes hard to find. After getting everything installed on my N1 I thought I would write a guide for other noobs like me that want to try out ICS or JB but would like a step-by-step guide. I hope that it is helpful. SpazeDog ROMs (both ICS and JB) are working wonderfully on my N1 - its a very nice update from CM7 with only minor issues so far.
Note: this was initially written specifically for SpazeDog roms, but as they have not been updated in a while I have provided links to other popular roms as well. If you would like to try a different ICS or JB rom this guide should work, just substitute with the appropriate rom and depending on the one you choose, you may also need to install Google apps.
If you looking at this guide and don't know the basics yet, check out the Newbie Friendly thread first.
Links to popular roms that will work using this guide:
Evervolv JB 4.2
Evervolv JB 4.1
CM 10, JB 4.1.2 by vijendrahs
CM 10, JB 4.2.1 by vijendrahs
Spazedog ICS/JB
Disclaimer: This guide involves making changes to your phone that potentially could brick your phone leaving it unusable. I am not liable for any changes you make or problems you may have with your phone. You should at least be familiar with entering commands using command prompt. This procedure will erase ALL the data on your phone. Make sure you have a backup of everything. A nandroid backup is highly recommended. Proceed at your own risk.
Before we get started make sure you have the following: a rooted Nexus One, a USB cable to attach your phone to a computer, and the Android SDK. If you are just now installing the Android SDK, open the SDK manager and make sure to install the "Tools" and in "Extras" the "Google USB Driver" are checked off and download them. Alternatively, you just download ADB and Fastboot (search this forum or google). If you have a Mac see this thread to get started with ADB and Fastboot.
If you Nexus One is NOT already rooted, then follow this guide from Cyanogenmod to root your phone. If you plan to use the adb commands below (they are optional) make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Step 1 - Download everything you will need:
4EXTRecovery Updater - the first link will download the .apk to your computer or phone.
BlackRose - go down to bottom of the first post to "Attached Files" and download the latest BlackRose zip file. If you don't want to do it yourself, check out this thread to flash a pre-made partition scheme. Often the developers (Evervolv) will also have a partition schemes that you can flash via Fastboot from your PC as well.
Your rom of choice - go to the downloads section and choose which rom you would like to try. Download the zip installation file.
Since you will be decreasing the size of your partition that apps can be stored on consider something like Mounts2SD or AD2SDX to move apps to your SD card.
Step 2 - Install and use 4EXTRecovery Updater on your phone:
The easiest thing to do is go to the 4ext link above, download and install it, directly from your nexus one. You can also install it by copying the APK file to your SD card, then using a file manager to find it and install it or you can use command prompt by opening command prompt, cd to the location of the Android SDK tools, and then type in the following command (replacing "path" with the path to where the APK is located on your computer):
Code:
adb install /path/4EXTRecoveryUpdater.apk
After you have installed 4ext open the 4EXT Recovery Updater. Tap "Settings" → "Allow" superuser request → "Yes" to connect to 4ext to get new data. Now select "Online install/upgrade" → "Yes" assuming it detects your nexus one correctly → select and install the latest 4ext recovery (at the top of the list).
After 4ext has installed, it will have placed a recovery image on your SD card - find it (its called recover.img) and it should be located in SD/Download/4EXT_Recovery_Touch/ folder. Copy this to your computer in case something goes wrong later and you need to re-flash the recovery image!
After installation of the 4ext recovery turn off your phone and boot into recovery by turning off your phone, turning it on again while holding the trackball down. This will boot into the bootloader, then press the power button once, use Volume Down to select "recovery" and press the trackball to select. Alternatively you can use the command prompt:
Code:
adb reboot recovery
Your phone should now boot into the 4ext recovery menu. Before moving on make sure you have any important stuff backed up because you are about to erase your entire SD card! Select "tools" →“partition sd card” → “remove all partitions and start from scratch.” Then for the 1st partition select “1024″ for a 1GB partition (this will be where ICS will be able to put your applications & data). Select "skip" for the 2nd partition and for the swap partition. Finally select the system “ext4″.
Step 3 - Copy the Evervolv, SpazeDog, or whatever zip installation file you have chosen to your phone's SD card
Download the ICS or JB zip file above and copy it to the root of your newly formatted SD card.
Step 4 - Installing and using BlackRose to resize the system partition:
Download the BlackRose application and install it on your computer. (Alternatively people have made flash-able partition schemes that you can just flash from your PC - usually links and instructions are provided in the installation rom's thread, Evervolv's here. If you do have access to a computer you can check out this thread).
Make sure your nexus one is attached via USB to your computer.
Open the BlackRose application - it will install and reboot your phone. Then follow along as shown in this video to resize your partitions for a JB ROM.
If you plan to install the ICS rom then use the video above as a guide but use the numbers (sizes) for the different partitions as indicated below.
After BlackRose has installed you will need to restart the application. After it has started up and recognized your device select "apply stock/custom blackrose" by typing in 1 and enter.
Then select "custom blackrose" by typing in 2.
Then type "resize" when prompted.
Now you will need to change the sizes of the system partition to 220 for ICS or 260 for JB.
Change the cache size to 8.
Finally name the new system partition, either "ICS" or "JB" depending on what you plan to install.
Note: some people have reported having problems getting into recovery at this point (if not move on to step 5). If that happens, luckily for you, 4ext put a recovery image in the downloads folder of your SD card and if you did what I said in step 2 you saved it. Try reflashing that recovery image using fastboot (remember the one that was in SD/Download/4EXT_Recovery_Touch/ and was named "recovery.img"). Put your phone into the bootloader by turning off your phone, turning it on again while holding the trackball down. To reflash the recovery open command prompt and cd to the location of the Android SDK tools. Then type in the following command (replacing "path" with the path to where the recovery image is located on your computer):
Code:
fastboot flash recovery /path/recovery.img
If that does not solve your problems (inability to get into recovery) then I would recommend going back to the cyanogenmod wiki and installing Amon_Ra's recovery. Then you can use it to flash your installation zip.
Step 5 - Install JB or ICS:
Now turn your phone off and boot into recovery as you did in step 2.
4ext will load. Select "wipe/format" → "format all partitions (except sdcard)" and then also "wipe data/factory reset."
Now go back and select "install from sdcard" → "choose zip from sdcard" → and then select the ICS or JB zip you copied to the SD card in step 3.
Now either the ICS/JB installer will load or it will just install in one step. Just follow the prompts to install and enjoy.
Depending on the ROM you chose you may need to install Google apps (see the specific ROM thread for details) and will also likely want to flash an apps-to-SD script as mentioned above so you do not run out of space.
This method worked perfectly for me, hopefully it will work well for you as well. Enjoy.
Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!
diegolm said:
Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!
Click to expand...
Click to collapse
I am sorry to hear that. Can you boot into recovery or is that broken as well? If you can boot into ext recovery try selecting "wipe/restore" → "wipe data/factory reset" and then try to install BCM again. I probably should have added that above, I will do that now.
If your recovery is broken but you can get into the bootloader (holding down trackball while starting up), you should be ok. You will probably need to flash Amon_Ra's Recovery using Hboot as was described in the guide from cyanogenmod link above. If there is a way to directly hboot flash 4ext recovery I don't know how to do it. Then you can try installing BCM again from the Amon_Ra's recovery and re-install 4ext after you get everything working.
I tried the Texasice ROM and it worked, but I didn't like it! Later I tried again BCM and It worked! I dont know, maybe I did something wrong... Anyway thanks again for the guide!!
Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2
intel415 said:
Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I am not sure which part you are referring to, but, yes, a few of the above instructions could be replaced with fastboot commands.
The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2
intel415 said:
The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I used the adb commands above because you can use adb to reboot directly into recovery (fastboot you can only reboot normally or into the bootloader) and you can also use adb to directly install apk files - fastboot cannot do those two things - it is more for flashing images (recovery, roms, etc). In order for adb to work make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Note that adb commands are not required - you can reboot into recovery and install the 4ext manually.
It won't let me post a link right now, but just google "adb commands" to find a list of all the commands you can use.
Hope that helps.
Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2
intel415 said:
Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
Yeah, its not bad - glad you got it working! ICS has been smoother than cm 7.2 for me as well.
Blackrose didn't ask me about userdata - it just assumed that automatically after putting in 220 system and 16 cache... I'll make note of that in the guide so its clearer. Thanks.
Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.
Look for "recovery.img"
bobbyphoenix said:
Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.
Click to expand...
Click to collapse
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.
c2med said:
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.
Click to expand...
Click to collapse
OK I'm stuck on what the path name is suppose to be. I tried it every way I can think of. Can you take a look at my screen shot, and tell me where I'm going wrong? The recovery image is on my desktop, so I'm not sure what exactly I should be replacing "path" with. I tried it from the link, and how you have it in your note. You don't have the "/to/" after path as in the CM link.
Well I tried a couple more times, and I can get it to seemingly do it, but it just hangs on this: (see screen shot) I get no error, and if I try to enter recovery on the phone I still get the reboot to the android and triangle with the ! in it.
place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk
And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".
n1newbie said:
place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
tommert38 said:
And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".
Click to expand...
Click to collapse
WOW Thank you both. I spent literally hours yesterday trying to get it to work. Tried your suggestions, and in five minutes it was up and running!
---------- Post added at 12:31 PM ---------- Previous post was at 11:33 AM ----------
I may have spoke too soon. I followed the instructions to the end. Installed the ROM, and rebooted, but now after the X I get the Spazdog splash screen with the big Z in the middle and green dots moving, but it stays there forever. I waited 20 minutes one time. Tried reflashing, but I get the same thing.
---------- Post added at 01:17 PM ---------- Previous post was at 12:31 PM ----------
Just giving an update on progress (in case someone else is in my boat too) Flashed back to stock GB. Reinstalled recovery, and reflashed Spaz. Got past the X, and the splash screen, but now it's stuck on the Android logo that looks like the night rider beam that goes across the word. Been there now for about 10 minutes.
You do have Blackrose, right?
Yep. Installed everything according to OP. I think it may be the partition sizes as I think flashing back to GB messed with them. It says 220 and 10, but after checking some threads, it looks like there is one missing (userdata). I tried flashing a custom GB from here http://forum.xda-developers.com/showthread.php?t=1214543&page=98 and I was able to install everything. Got it up and running, so I'm going to start over for ICS, or do you think I can flash one of these for ICS http://forum.xda-developers.com/showthread.php?t=1637166 , and then just flash the ROM after?
220/10 means that you have 220MB for system and 10MB for cache, everything that's left will be userdata, so it doesn't ask (total is ~436MB, so userdata will be ~206MB in that case).
In HBOOT you can check how large your partitions are, or you could use the FreeSpace app for example. Always make sure your system partition is large enough before flashing a ROM.
This HOW-TO is meant for individuals who like to do things manually and see each process as they occur, versus using a toolkit. I prefer manually unlocking/rooting as I can confirm each step visually and I believe it makes for a more educational experience. Familiarity and confidence with fastboot/adb can be beneficial later on for restoring/troubleshooting/flashing etc down the road.
Unknown at this point if OTA updates will install after flashing CWM. There may be a check file in the OTA that could prevent installation if modified file structure is detected. I’ll edit when I confirm. At any rate, not really an issue as you can flash the OTA yourself as someone on XDA will most likely post it up, or you could re-flash the stock recovery using fastboot which you will now be comfortable with after using this guide! Additionally, if an OTA causes you to lose root you can revisit the appropriate steps to flash SuperSU again.
There are several ways to do these procedures, and I’ve certainly taken the long way on some of them. So by no means am I claiming this to the best or most efficient method, but my hopes are to make things a little more clear and simple based off some of the questions and challenges I’ve seen in a few threads.
This how-to was written for Windows and uses adb and fastboot for installation.
Please let me know of any corrections, additions or errors. Many thanks to the members and devs who made these files available.
1. Download all of the following files and place them in the same directory. I will note whether you need to extract them or not.
Download and extract platform-tools-v16.zip from here: (thanks to efrant)
http://forum.xda-developers.com/showthread.php?t=1626895
Download and extract [ADB/FB/APX Driver] Universal Naked Driver 0.72 from here:
http://forum.xda-developers.com/showpost.php?p=20058157&postcount=1
Download SuperSU from here: (look for UPDATE-SuperSU-v1.25.zip or current version)
http://forum.xda-developers.com/showthread.php?t=1538053
Download ClockworkMod from here: (look for Galaxy Nexus 7, Download Recovery 6.0.3.1 or current version – Recommend non-Touch as of ver 6.0.10, some reported issues with the Touch version)
http://www.clockworkmod.com/rommanager/
2. Now we will install the drivers and verify they are working. If you cannot verify drivers are functioning in both normal boot and recovery you need to stop and figure out what you are doing wrong. Proceeding further would be pointless. If you are having trouble, visit the Naked Driver thread listed above or here: http://forum.xda-developers.com/showpost.php?p=29044502&postcount=735
a. Make sure you have USB debugging enabled on your Nexus: setttings ->develop options ->USB Debugging.
b. USB connect your Nexus to your Windows pc. If you get a notification for unknown/driver not found, look in Device Manager for the exclamation point, and right click for update driver software, then browse my computer, then point to where you saved and extracted the Universal Naked Driver folder. If you get a warning from Windows complaining the driver is not signed, hit ‘Install driver anyway’. After the driver installs, you should now have ‘Nexus 7’ listed under ‘Portable Devices’ with no exclamation point.
Now we will verify using adb. You will need to launch a command prompt from the directory you saved all the files from step 1 to. Easiest way is to navigate to the directory via file explorer, then hold down shift and the RIGHT mouse button, and select “Open command window from here”.
In the cmd prompt, type:
adb devices
You should get a response with your Nexus serial number. If not, stop. Drivers are not loaded, re-read above and visit threads mentioned, try again. You should see something like:
List of devices attached
945d3339495 device
if instead you see:
List of devices attached
945d3339495 offline
then most likely you need to look on your nexus for a notice to allow the connected computer permissions to use usb debugging. If you don't see a notice, disable/enable usb debugging in "Settings -> Developer options" and then you should get the prompt. You should select 'remember this computer', if not you will have to do it again upon reboot.
c. Now we need to reboot into the bootloader and load the drivers again. So type:
adb reboot bootloader
and your Nexus should reboot into the bootloader. My laptop found the driver on its own, note that in Device Manager it is now listed as ‘Android Device’ instead of under ‘Portable Devices’. If your system does not find the driver, follow the same steps as above to update your driver after you located the exclamation point in Device Manager.
Now we will verify that the driver is installed correctly while in the bootloader. Again from a command prompt opened from the directory where you saved all the files from step 1, type:
fastboot devices
You should get a response with your Nexus serial number. If not, stop. Drivers are not loaded, re-read above and visit threads mentioned, try again.
3. Perform device unlock. NOTE: !!!THIS WILL ERASE ALL YOUR USER DATA!!! Please backup accordingly.
Your Nexus should still be in the bootloader. Type:
fastboot oem unlock
Your Nexus will prompt you to accept. NOTE: !!!THIS WILL ERASE ALL YOUR USER DATA!!! After a short moment, the device should report unlocked under “lock state”. Reboot device by typing:
fastboot reboot
After rebooting, sign in, etc.
4. Copy over SuperSU . In windows explorer locate the UPDATE-SuperSU-v1.25.zip and copy it to your Nexus internal storage area. Don’t put it any of the folders, just dump it in there. Now reboot into the bootloader again by typing:
adb reboot bootloader
5. Flash CWM. Once in the bootloader type:
fastboot flash recovery recovery-clockwork-6.0.3.1-grouper.img
after you get ‘finished’ from the command window, reboot your Nexus into CWM recovery by navigating with the volume buttons to ‘recovery mode’, then press power button.
6. Root Nexus. Using the volume keys, navigate to ‘install zip from sdcard’ and hit the power button. Now select ‘choose zip from sdcard’ and hit the power button. Navigate down to UPDATE-SuperSU-v1.25.zip’ and hit the power button. Select ‘Yes’, hit power. Once done select ‘go back’, then ‘reboot system now’.
Congrats, you’ve unlocked and rooted your Nexus!
Now at this point CWM recovery may or may not still be present on your device. There have been mixed reports on whether it will ‘stick’ the first time you flash it. The stock ROM has a check file that will replace CWM with the stock recovery upon reboot. To determine if CWM is still present simply reboot into recovery and see if it is there. Type:
adb reboot recovery
Obviously if you see the droid with exclamation point CWM did not stick. If you have no need for CWM, and simply wanted root you could stop now. Wait a few minutes and your device will reboot on its own and you are all done.
However, if you desire CWM then proceed on.
7. Rename recovery-from-boot.p to prevent stock recovery re-installation. Your Nexus should be booted normally at this point.
a. Go to the Play store and install ES File Explorer File Manager. Under settings enable ‘up to root’, ‘root explorer’, and ’mount file system’.
b. Navigate to /system and rename:
recovery-from-boot.p
to
recovery-from-boot.bak
by long pressing and selecting ‘rename’. Note: Be careful while navigating your device with these options enabled, a typo or slip-up could cripple your device and require a restore. I suggest once this rename is competed to disable the above options to avoid any mistakes in future exploring.
8. Flash CWM again.
a. Reboot into bootloader by typing:
adb reboot bootloader
b. once in bootloader type:
fastboot flash recovery recovery-clockwork-6.0.3.1-grouper.img
c. reboot device by typing:
fastboot reboot
d. verify CWM stuck by rebooting into recovery:
adb reboot recovery
And that should be it!
Some additional notes: CWM does make notice on rebooting with a message ”ROM may flash stock recovery on reboot. Fix? This can not be undone”. I don’t know what CWM will do there, so I prefer to rename the recovery-from-boot file so that I could easily restore it if I wanted. But perhaps that is what CWM does, although the message persists even after I renamed the file. Maybe someone could clarify this.
Hope this helps some people out in enjoying this great device even more, thanks for reading.
4.1.2 and 4.2.1 updates...
Thought I would revisit the thread as we've had two updates since I wrote the above. I installed 4.1.2 OTA with no problems but as expected, I lost root and CWM.
Because I'm lazy, I didn't worry over it much and then 4.2.1 shows up and also installed perfectly. Finally got around to getting root back and here are the steps I used.
Notes:
* Need to make sure drivers are correctly installed. See first post.
* I never really used CWM so I elected not to permanently install it this time.
* This update is a brief synopsis of how I got root back. If the steps are not clear, review the first post as the procedure is very similar.
1.) Ensure USB debugging is still enabled. On 4.2.1 "Developers options" are hidden by default. To enable simply tap "Settings > About tablet > Build number" 7 times. Back out and "Developers options" should now be available. In my case USB debugging was still enabled.
2.) Download SuperSU v0.99 and CWM 6.0.1.9 from links in first post. I used non-touch version of CWM.
3.) Transfer SuperSU over to internal storage of your Nexus. Be sure you know where you dumped it.
4.) Reboot into bootloader: adb reboot bootloader
5.) Temporarily boot or permanently install CWM so we can install SuperSU zip.
for temp boot type: fastboot boot recovery-clockwork-6.0.1.9-grouper.img
for perm install type: fastboot flash recovery recovery-clockwork-6.0.1.9-grouper.img
6.) Once in CWM select:
a. install zip from sdcard
b. choose zip from sdcard
c. navigate to /0/ then wherever you put SuperSU
7.) Once finished back out and reboot system now. I selected "No" on allowing CWM to disable stock recovery. If you are only temp booting CWM then this likely won't matter either choice you make. If you perm flashed CWM then you may wish to choose 'Yes".
That should cover it. Thanks for reading, any questions or corrections be sure to let me know.
I have a question about this:
I rooted and installed CWM on my 4.2 N7, but now, then I try to install the 4.2.1 OTA update, I get this error:
Code:
assert failed: apply_patch_check("/system/lib/libweb rtc_audio_preprocessing.so", "bin_number", "big_number""),
E: error in /cache/jop40d-from-jop40c.zip
(Status 7)
It's wise to apply this if I already have a rooted+CWM N7?
Some root procedures, or third party apps like Titanium Pro can make changes to certain system files that will cause an official update to fail. In your case, it appears at least "rtc_audio_preprocessing.so" located in "/system/lib/libweb" has been altered.
The easiest solution is to flash the current factory image then root. You can find them here: https://developers.google.com/android/nexus/images#nakasi.
However, you will lose your data. So back up accordingly.
If that's not an option, you can try:
a.) figure out which app you have that caused the change, and see if it has a 'revert' option or if uninstalling will put the file(s) back to stock.
b.) find the unmodified contents of /system/app and /system/lib and replace yours. Needs to be from 4.2 in your case.
c.) find a modified manual update patch (either zip for CWM or .img for fastboot) that has been altered to ignore the integrity check.
Curious, just went looking for "rtc_audio_preprocessing.so" in a factory 4.2 system.img and can not locate it, or the lib/libweb directory. Perhaps a third party app made these additions and thus the integrity check is failing as the files are unknown/unaccounted for?
At any rate, I went ahead and sourced a 4.2 system.img and extracted the /app and /lib directories in case this helps you or anyone else searching along.
Extracted from: nakasi-jop40c-factory-6aabb391.tgz
https://dl.dropbox.com/u/34704640/sys_apps_dir.zip
https://dl.dropbox.com/u/34704640/sys_lib_dir.zip
https://dl.dropbox.com/u/34704640/sys_apps_dir.zip.md5
https://dl.dropbox.com/u/34704640/sys_lib_dir.zip.md5
so I factory-reseted my N7, but it didn't helped. I found the file /system/lib/libwebrtc_audio_preprocessing.so so I tried to replace it with the file you posted (thanks btw!), but while using a console (su, then cp file.so file.so.backup) I get the error saying it's a read-only system, so I can't replace that file
any other idea?
EDIT: So I was playing around with the N7 (although I can really remember, I think I formated /system ?):
So, yeah, I actually formated /system for some unknown reason and there is no OS to boot, so I'm downloading at 25 KBps (yes...I know) and I'll be installing the JOP40D version for the N7.
ah, so the file is actually:
/lib/libwebrtc_audio_preprocessing.so
not
/lib/libweb/rtc_audio_preprocessing.so
That makes a little more sense. On cp over the original file, as you discovered the /system partition needs to be remounted as writable before you would be able to make changes. You could easily accomplish this with one of the root file explorers from the market. I use "ES File Explorer" as its free. Then simply copy over your file.
Or if you prefer adb: mount -o remount rw /system
Regardless, you are starting over from scratch so no worries. One of the things I love about this device is the option to start fresh-from-factory with minimal fuss.
igot a question. im currently running or 4.2.1 (rooted/unlocked). i used wugsfresh to root and unlock my device. wugfresh uses TWR and i want to try CWM and remove the TWR, would it be possible? i want to try different roms like cyanogen and i think CWM would be a good option.TIA
cub0ne said:
igot a question. im currently running or 4.2.1 (rooted/unlocked). i used wugsfresh to root and unlock my device. wugfresh uses TWR and i want to try CWM and remove the TWR, would it be possible? i want to try different roms like cyanogen and i think CWM would be a good option.TIA
Click to expand...
Click to collapse
I am also on 4.2.1 unlocked and rooted with wugfresh toolkit. I downloaded CWM from the play store, the app can download the latest CWM recovery and flash it for you. That is what I did, All I have used CWM for is a nandroid backup, but have booted into recovery and wiped cache and fixed permission
Has anyone had issue is SuperSU and CWM running Fix Permissions in the CWM app? I get an error...
Thank you!
Thank you very much for the excellent guide, your explanations were very clear!
It was a lot of fun following it, and I am very happy for choosing this guide over the 'one-click' toolkits.
I'll give it a try
After trying a "all in one toolbox" to unlock and root I think I'll give this a shot. I got stuck at not being able to root and like your OP said, doing it manually would help with the learning curve.
Quick questions that has popped up is.
Do I lock my bootloader back to use your guide?
I've noticed drivers I have in device manager have different names. Does this mean there are dif drivers that do the same thing? Should i delete them and use the ones in the OP?
Late response, but I'll answer for future users following this thread...
Once your bootloader is unlocked by any means, no need to relock in order to follow this guide. We simply have to have it unlocked so we can gain root
Drivers are probably the most common issues people have in any instance of trying to interact with their device. While its not imperative that the names are the same, what is most important is that you can communicate with the device. There really isn't the right or wrong driver name, just that the driver works! Having said that, if you are wondering whether you have the correct drivers installed, simply follow the steps and attempt a "adb devices" or "fastboot devices" command depending on your device status as is outlined in the tutorial. If you do not have the appropriate response, then you need to stop and determine the issue.
Update after OTA 4.2.2
Lost root as expected, and followed procedure in post #2 to gain root back. Also updated OP file versions to current as of this post as they all worked successfully.
Only thing I would note: If you get a "offline" notice after trying 'adb devices', be sure to check your nexus for a notification to allow the connected computer access for USB debugging. If you don't see one, go to "Settings -> Developer options" and disable/enable USB debugging and it should pop up. I don't remember this behavior when I first wrote the tutorial, so it may be something new for 4.2.2. After reboot it will require approval again, so you may wish to select 'remember this computer'. I added this note in the OP as well in the appropriate step.
Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
_______________________________________________________________________________
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...
Thank you for posting this. I tried three other methods to get root back before this, and none of them worked. This one did the trick without any problems at all. Thanks again!
Wug's Nexus Root Toolkit 1.9.4
kyoshiro22 said:
Wug's Nexus Root Toolkit 1.9.4
Click to expand...
Click to collapse
I know there's Toolkit's out there, but this is for those who choose to take the "Fastboot" approach.
gestevez1213 said:
Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP[ - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...
Click to expand...
Click to collapse
This is NOT working.... I tried it 3 times on 2 devices
papayayoghurt said:
This is NOT working.... I tried it 3 times on 2 devices
Click to expand...
Click to collapse
What part are you stuck at?
For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.
I used chainfires auto root for the N5 (stock lollipop Boot loader). Worked great. Just download to a PC put phone into boot loader and run the bat file. I can't link but a quick google will find it for you.
Sent from my Nexus 5 using Tapatalk
andrelessa said:
For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.
Click to expand...
Click to collapse
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?
Personally, I'm using the autoroot from chainfire. Works like a charm, no custom recovery is needed (I have the stock recovery).
gestevez1213 said:
What part are you stuck at?
Click to expand...
Click to collapse
Everything is working, but then SuperSU can´t find a Binary.
gestevez1213 said:
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?
Click to expand...
Click to collapse
Yes, I read somewhere that TWRP need this...
papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Are you running the official lollipop release? It should work with that. Delete the app, and try again.
Just put your phone in bootloader and run cf-autoroot from windows if you dont want twrp.
I have twrp but its not working like that
papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Had the same issue and needed to flash the updated kernel from chainfire : https://www.androidfilehost.com/?fid=95747613655047375
Why are you trying to do this the hard way? Just use chainfire's autoroot.
It works perfect and it's literally one command
fastboot boot CHautoroot.img (or whatever the file name is)
cf-auto-root is the way
I agree, just use cf-auto-root. You should be good to go in no time.
Just for FYI, if you already have unlocked bootloader, it won't wipe your data, if you are concerned.
CF-auto-root roots N5 without modifying your kernel. I believe, if you flash the SuperSU in TWRP, it would modify the kernel. It's nothing bad, but if you want to remain "stock" and don't want to reflash stock ROM later to get the OTA, just use "Full unroot" from SuperSU app and you are stock and ready for next OTA.
I have encrypted the storage on my Nexus 5. Will CF-Auto-Root wipe my storage?
papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
I have the same error.