i tryed searching but i cant seem to figure out how to fix this problem.... my phone is a p925g from rogers. it would boot up normally till it reaches the rogers boot up and it would just reboot itself. i tried going into recovery and doing a factory reset but it still has the same problem.i even tryed reflashing the stock os from the lgmobile support tool and also tryed reflashing the stock kdz and im still stuck on a bootloop? p.s sometimes it would load normally but but give it a few min and it would reboot itself into a boot loop again?? can anyone help me out here?
What version of android are you/ were you on?
Sent from my phone.
Markyzz said:
What version of android are you/ were you on?
Sent from my phone.
Click to expand...
Click to collapse
stock gingerbread 2.3.5 rooted on stock recovery.
Related
here's the thing..
i'm running on v20g, i rooted it using LG extract and injected CWM, flashed it using smart flash. but everytime i go to Reboot to recovery i always end up on a boot loop.
will someone help me? is there any way to downgrade from v20g to v20o??
please help me, i'm unable to use my phone for about a week now. :crying: :crying: :crying:
try using smartflash.... works for me everytime... and also try flashing the normal cwm not the touch one... might help...
Zaihanzainal said:
try using smartflash.... works for me everytime... and also try flashing the normal cwm not the touch one... might help...
Click to expand...
Click to collapse
you suggest i download the v20o kdz then extract bin/fls files then flash with smartflash? will that work?
yup you can try that, i normally do that when bootlooped or bricked =P
same problem for me
Zaihanzainal said:
yup you can try that, i normally do that when bootlooped or bricked =P
Click to expand...
Click to collapse
still boot loop.
Hey buddy! I have same problem with you! I noticed that when i'm on stock rooted rom i always ended into bootloop going into recovery using either rom manager or quickboot. When i'm on custom rom like marvel, zeus etc. i also ended into bootloop going into recovery but after 1 hr or more, i will turn on the phone and then it will boot into recovery. I have a hard time flashing different custom rom because of this. Its like there is a time out before entering cwm recovery. It also happened to me everytime i used smartflash tool. It takes an hour before my phone got boot. 2 weeks ago someone upload a flashable V20s spain stock rom that has capable of entering cwm recovery after flashing the stock rom and luckily i manage to save it to my computer. I flash it using smartflash tool, after flashing it will reboot and then it will stock into bootloop. I will remove the battery and wait for atleast 1 hr and then i will turn on my phone and it will automatically boot into recovery. I do data factory reset, clear cache 1st then install superuser zip and then after that i flash the custom rom. I suggest that look for a flashable stock rom that has capable of entering cwm automatically after flashing and once you got the cwm do all you want but install first the superuser zip before flashing custom rom.
EDIT:
Here's the link buddy but i don't know if its available to download.
http://forum.xda-developers.com/showthread.php?t=1775994
Sent from my LG-P970 using xda app-developers app
Hi,
I just recently installed a custom ROM which is this: PAC ROM then I removed it and installed anew which is this: Jellybean V3. Now the problem is that, I can't pass through the boot animation, it is stuck up. I tried re-flashing an original 2.3.6 via Odin but still, after starting my phone, all I can see is the boot animation.
Is this what you call a brick? Or was it something else? And what are the possible solutions? Thanks.
Regards,
Heero
TheHeeroYuy said:
Hi,
I just recently installed a custom ROM which is this: PAC ROM then I removed it and installed anew which is this: Jellybean V3. Now the problem is that, I can't pass through the boot animation, it is stuck up. I tried re-flashing an original 2.3.6 via Odin but still, after starting my phone, all I can see is the boot animation.
Is this what you call a brick? Or was it something else? And what are the possible solutions? Thanks.
Regards,
Heero
Click to expand...
Click to collapse
It's called bootloop.
F4uzan said:
It's called bootloop.
Click to expand...
Click to collapse
and it happened because you flashed a rom meant for gt-s5570i (galaxy mini plus) which have slightly different hardware. just flash some other rom.
after flashing stock firmware with odin, u must wipe data and cache..its mandatory or else u'l be in bootloop forever
TheHeeroYuy said:
Hi,
I just recently installed a custom ROM which is this: PAC ROM then I removed it and installed anew which is this: Jellybean V3. Now the problem is that, I can't pass through the boot animation, it is stuck up. I tried re-flashing an original 2.3.6 via Odin but still, after starting my phone, all I can see is the boot animation.
Is this what you call a brick? Or was it something else? And what are the possible solutions? Thanks.
Regards,
Heero
Click to expand...
Click to collapse
Be happy! Using ROM meant for Mini Plus can brick your device completly. Which means no life signs. No backlight, no sound, no vibration, no recovery, no download mode. SO nothing. And your device is still alive. So just be happy. That was close.
or flash a four package firmware
as it will refresh your data partition
LOL BOOTLOOP!clear data and cache after installing the ROM.
Radu M. ^_^
Hi
I'm having a few problems with my trusty Galaxy S.
I tried to update to Cyanogen 10, got it installed through Clockwork mod no probs. I had a few problems with it , thought I'd try 9 as my friend gets on great with that.
It hasn't successfully flashed though. It's stuck in a loop where it enters Clockwork, then crashes back to the loading screen. I haven't done much of this for ages so guess I got careless and made an error somewhere.
I assume I need to flash through Odin now as I can still get to download mode, but not recovery. I don't know which kernel to get and use though? no idea what will work and don't want to brick my phone. I'd just like a working kernel that so I can put Cyanogen on again. Any advice is appreciated thanks.
pjimbo said:
Hi
I'm having a few problems with my trusty Galaxy S.
I tried to update to Cyanogen 10, got it installed through Clockwork mod no probs. I had a few problems with it , thought I'd try 9 as my friend gets on great with that.
It hasn't successfully flashed though. It's stuck in a loop where it enters Clockwork, then crashes back to the loading screen. I haven't done much of this for ages so guess I got careless and made an error somewhere.
I assume I need to flash through Odin now as I can still get to download mode, but not recovery. I don't know which kernel to get and use though? no idea what will work and don't want to brick my phone. I'd just like a working kernel that so I can put Cyanogen on again. Any advice is appreciated thanks.
Click to expand...
Click to collapse
Flash .tar semaphore kernel via odin then flash cm10.1 3 time from recovery
http://forum.xda-developers.com/showthread.php?t=1786220
Sent from my GT-I9000 using xda app-developers app
5aaled said:
Flash .tar semaphore kernel via odin then flash cm10.1 3 time from recovery
http://forum.xda-developers.com/showthread.php?t=1786220
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Thanks that worked just fine. Nearly bricked the phone using someone's restore to stock guide. But now this kernel has installed fine.
Unfortunately I am trying to flash cm10, it installs fine, but it just loads back up into recovery mode, and wont boot properly.
Does anyone have any ideas on how I can get out of this CWM recovery boot-loop I'm stuck in?
The Semaphore Kernel is just stuck for me.
pjimbo said:
Does anyone have any ideas on how I can get out of this CWM recovery boot-loop I'm stuck in?
The Semaphore Kernel is just stuck for me.
Click to expand...
Click to collapse
All sorted now, flashed it back to stock with a recovery pack from a post on here
Sooo, I got a problem with my Galaxy Mini 2.
First, I wanted to flash Cm11 (by TheWhisp), but something went wrong during flashing process, and my device bootlooped.
I tried to go into recovery, but it didn't work.
Than I thought it might be a good idea to flash stock ROM via odin. I did it once in the past, with a succesful outcomes, so I fought it will work again.
This ended with a bootloop, only change was the logo during boot process. Than I tried to flash recovery but it didn't change anything.
So my phone is in bootloop, stock ROM flashing doesn't help, and I can't run recovery.
Any ideas how can I fix it?
Do a search before posting
myrczu said:
Sooo, I got a problem with my Galaxy Mini 2.
First, I wanted to flash Cm11 (by TheWhisp), but something went wrong during flashing process, and my device bootlooped.
I tried to go into recovery, but it didn't work.
Than I thought it might be a good idea to flash stock ROM via odin. I did it once in the past, with a succesful outcomes, so I fought it will work again.
This ended with a bootloop, only change was the logo during boot process. Than I tried to flash recovery but it didn't change anything.
So my phone is in bootloop, stock ROM flashing doesn't help, and I can't run recovery.
Any ideas how can I fix it?
Click to expand...
Click to collapse
You forgot to wipe data and now you got bootloop !
Find yourself a solution by read threads from here <click>
Or go here for solution !
Same issue here and ill the upper link to resolved the problem.Thanks for the link
Wonderful
Lodaserves said:
...Thanks for the link
Click to expand...
Click to collapse
Thanks button? :laugh:
Ok i will dont worry =)
Hi Guys,
Im using n950f and recently had bootloop. I tired to flash new stock firmware. But still same, device is still keep on bootloop not able to get home screen.. just samsung welcome logo and restart to the same place. I tried twrp that not responding to touch, i tried different versions but no luck. From the last 2months its in same state, i tried different stock firmwares 3months old,previous security patch..1yr old and current but same.. phone can able to pass odin flash but after this also keep on boot loop. Please help me, this issue happened when it is in use and suddenly went bootloop. And phone not able to get recovery mode using the key combinations..
Are you able to logcat the device during boot?
XDHx86 said:
Are you able to logcat the device during boot?
Click to expand...
Click to collapse
How to get?
abyabrahammathew said:
How to get?
Click to expand...
Click to collapse
Do you have usb debugging enabled? You have to use adb logcat in cmd while the device is connected and is booting.
I tried to install stock rom using twrp but zip is failing.. file is good only, I tried different firmwares..same errors
abyabrahammathew said:
I tried to install stock rom using twrp but zip is failing.. file is good only, I tried different firmwares..same errors
Click to expand...
Click to collapse
You can't flash Samsung stock ROM through TWRP, you need ODIN to do so. You can get your stock ROM from here (SM-N950F).
I tried using odin, it passed and boot loop still there
abyabrahammathew said:
I tried using odin, it passed and boot loop still there
Click to expand...
Click to collapse
That's why you need to logcat the device...