[Q] Best CPU settings for games in Apocalypse ROM? - Galaxy Ace S5830 Q&A, Help & Troubleshooting

Hey, all.
I am running the apocalypse ROM on my SGA.
While playing, i noticed that Jetpack Joyride lags a lot.
What will be the best CPU settings and governor for gaming?
Please let me know your opinion.
Also, I rarely over clock it beyond 844mhz, so is it a good idea to go beyond?
Thanks.
Peace out.

Kabir Saxena said:
Hey, all.
I am running the apocalypse ROM on my SGA.
While playing, i noticed that Jetpack Joyride lags a lot.
What will be the best CPU settings and governor for gaming?
Please let me know your opinion.
Also, I rarely over clock it beyond 844mhz, so is it a good idea to go beyond?
Thanks.
Peace out.
Click to expand...
Click to collapse
864 or even 883 is pretty stable for me

Maximum clock speeds vary with device..Impossible to give an exact figure or predict anything
I got transformed into a potato while writing this post..

limxyz said:
864 or even 883 is pretty stable for me
Click to expand...
Click to collapse
But doesn't that kill your battery?
Sent from my GT-S5830 using xda app-developers app

Prawesome said:
Maximum clock speeds vary with device..Impossible to give an exact figure or predict anything
I got transformed into a potato while writing this post..
Click to expand...
Click to collapse
I agree.
But I was just wondering which would be the best governor for gaming. Everyone may have different opinions.
Sent from my GT-S5830 using xda app-developers app

I have mine on 902mhz, always stable, very fast and very good for gaming, the best governor for gaming is either lagfree or performance.
Best of luck!
Sent from my GT-S5830 using xda premium

I've been wanting to OC that high, but I've been afraid of heat. You had any issues, notice it running hotter than normal?
Sent from my Galaxy Ace

GlaciaDDF said:
I have mine on 902mhz, always stable, very fast and very good for gaming, the best governor for gaming is either lagfree or performance.
Best of luck!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Thanks.
But are you site you have no over heating issues?
And what is the minimum CPU frequency you set?
Sent from my GT-S5830 using xda app-developers app

Reply
well if you scared of crashes, heat and battery drain you can set maximum to 864mhz, minimum to 245 mhz and set governors to performance will be very stable and faster. it depends on your device. i found my ace oc to 902mhz is not stable for me, it crashes often and very hot, drains the battery about 1% 6-7 mins.

Rush6 said:
well if you scared of crashes, heat and battery drain you can set maximum to 864mhz, minimum to 245 mhz and set governors to performance will be very stable and faster. it depends on your device. i found my ace oc to 902mhz is not stable for me, it crashes often and very hot, drains the battery about 1% 6-7 mins.
Click to expand...
Click to collapse
Thanks.
I'll try it out
Sent from my GT-S5830 using xda app-developers app

Related

Best MHZ for longer Battery Life?

Guys, im using Overcome Icarus rom. What is the best mhz for longer battery life? Is it 800mhz? What about tye uv?
Sent from my GT-P1000 using Tapatalk
200mhz, your tab will have heaps of battery life!
Are you dead serious? 200mhz?
Sent from my Galaxy Tab using Overcome Icarus
ryn888 said:
What is the best mhz for longer battery life? Is it 800mhz? What about tye uv?
Click to expand...
Click to collapse
800Mhz with ondemand governor, UVed to ~-100mV seemed perfect balance for me; long battery life and fine performance.
I must remind that there are other (and better) ways to improve battery life; ie. calibrating with battery status; turning off unnecessary services and connections (3g, gps and most importantly wifi) etc.
Regards
Kongar
ps: below 800Mhz the tab becomes a little unresponsive for my tastes; also; I've weird "feeling" that 600Mhz is not meant to be used as a constnt freq. for that.
ps2: there are some UV issues for that release's kernel; go for Koxudaxi 0.13 or Dip's for the time being.
kongark said:
800Mhz with ondemand governor, UVed to ~-100mV seemed perfect balance for me; long battery life and fine performance.
I must remind that there are other (and better) ways to improve battery life; ie. calibrating with battery status; turning off unnecessary services and connections (3g, gps and most importantly wifi) etc.
Regards
Kongar
ps: below 800Mhz the tab becomes a little unresponsive for my tastes; also; I've weird "feeling" that 600Mhz is not meant to be used as a constnt freq. for that.
ps2: there are some UV issues for that release's kernel; go for Koxudaxi 0.13 or Dip's for the time being.
Click to expand...
Click to collapse
Finally a serious answer! Thanks kongrak. No thanks for other one.
Sent from my Galaxy Tab using Overcome Icarus
ryn888 said:
Finally a serious answer! Thanks kongrak. No thanks for other one.
Sent from my Galaxy Tab using Overcome Icarus
Click to expand...
Click to collapse
Seriously try it, you can do everything but games
Sent from my GT-P1000 using XDA Premium App
natious said:
Seriously try it, you can do everything but games
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Okay then.... i will.

help me please

hi all
i have installed prime hd 9 with custom kernel i want to exactly know at what min and max CPU frequency should i keep for good high speed performance which is stable i kept some frequency at random and it was not that much speed it slowed my phone and in what governor should i keep
I personally dont recommend doing anything with your CPU because from my experience I didnt see so much difference and speeding up your CPU will make you battery drain faster and you CPU will reach highier temps. For the governor I use the performance one because it is constantly keeping the clocks on the highest set values. It makes the phone work smoother and while changing clocks its slowing the phone down. You can try and look for every governor meaning but I recommend the performance one. To monitor the temps use SetCPU`s widget.
Smartass v2 the best
Sent from my E15i using XDA
I +1 what the guy above me said.
Sent from my R800i using xda premium
CosminAdriaan said:
Smartass v2 the best
Sent from my E15i using XDA
Click to expand...
Click to collapse
I agree this :thumbup:
Sent from my E15i using XDA
I also agree, Smartassv2 :good:
-------------------------------------
press thanks if I helped you:good:

Q - Overclock

Hy XDA,
I have a simple question:
Why does my phone turn off if i OC it too high?
Cpu can't handle it or battery overheat?
Sent from my GT-S5830 using xda premium
Menta***yi said:
Cpu can't handle it or battery overheat?
Click to expand...
Click to collapse
Cpu can't handle it or battery overheat
But Which?
All theese too?
Anyway i'll make a test:
I will OC higher and higher and run a Quadrant Benchmark, while holding my phone in front of a 90cm fan, without the phone's back cover
Will report the test's performance ^^
Sent from my GT-S5830 using xda premium
Its due to the cpu, every cpu is different, their tolerant limits for oc are different, you should oc the processor only uptill the point where it runs without any reboot.
Do not cross the safety limit, it might damage your processor.
Oh man. Accidentally pressed the thanks button again.
Volkswagen is cool and I hope to own one.
No problem, there we go there is a Big Thanks for you too
Sent from my GT-S5830 using xda premium

Fastest, stable overclock Zeus v7.04

What is the fastest but stable overclock and undervolting for LG Optimus Black on Zeus v7.04?
logannz said:
What is the fastest but stable overclock and undervolting for LG Optimus Black on Zeus v7.04?
Click to expand...
Click to collapse
Fastest mean 1350 Mhz available in Zeus, but on safeside...1100 is preferrable of most users and is recommended.
In view of voltage (0) default is good.
InteractiveX is the latest and gives better battery backup..
logannz said:
What is the fastest but stable overclock and undervolting for LG Optimus Black on Zeus v7.04?
Click to expand...
Click to collapse
For me,Best overclock is 1300MHz(you can put 1350 if you'd like)governor is smartass v2 and i/o scheduler is deadline.That is good enough for gaming and other stuff.For undervolt,go as" under" as you want
Sent from my LG-P970 using xda app-developers app
After studying on all Sources, Undervolting renders little or no use to saving power. It also reduces your performance. Take note.
Sent from my LG-P970 using Tapatalk 2
I overclocked to 1350Mhz and my phone constantly restarted so I put it down to 1200Mhz and it seems to be fine for now
Sent from my LG-P970 using xda app-developers app
logannz said:
I overclocked to 1350Mhz and my phone constantly restarted so I put it down to 1200Mhz and it seems to be fine for now
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
You can't OC that much without pushing voltage up aswel.
What do you recommend changing the voltage to if I'm going to overclock to 1350Mhz?
Sent from my LG-P970 using xda app-developers app
logannz said:
What do you recommend changing the voltage to if I'm going to overclock to 1350Mhz?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Push it up one unit at a time until it reaches a stable point (Just watch out for heat) . It's better to leave it at 1.2Ghz since I don't think you'll experience any lag at 1.2.
I put it up to 1350Mhz and voltage on the maximum of 5 and so far it's been really smooth without restarting. I'm not too worried about heat as my old Motorola Defy would get to about 60 degrees Celsius and I just played a couple of games and my phone is sitting around 30-40 degrees Celsius
Sent from my LG-P970 using xda app-developers app
logannz said:
I put it up to 1350Mhz and voltage on the maximum of 5 and so far it's been really smooth without restarting. I'm not too worried about heat as my old Motorola Defy would get to about 60 degrees Celsius and I just played a couple of games and my phone is sitting around 30-40 degrees Celsius
Click to expand...
Click to collapse
Why don't you take serious the BATTERY HEAT, it will cost life sometimes..

Best no frills setting for battery?

What do you recommend me for good battery results. The performance shouldn't be bad. Or do you recommend me a another cpu app?
Sent from my GT-S5830i using xda premium
Please
Tapatalk signature:
Sent from my banana with xda premium
I use JuiceDefender. Keeps my battery going for a whole day with moderate to heavy usage.
Android-fany said:
What do you recommend me for good battery results. The performance shouldn't be bad. Or do you recommend me a another cpu app?
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
friend im using no frills...i have changed the settings to
max-832
min-156
governor-smartassv2
io-noop
this is what im having..almost all the time cpu frequiencies falls under 156mhz...try this..
aravindraj said:
friend im using no frills...i have changed the settings to
max-832
min-156
governor-smartassv2
io-noop
this is what im having..almost all the time cpu frequiencies falls under 156mhz...try this..
Click to expand...
Click to collapse
In Rafael.baugis kernel frequency 156 is kind bugged - it causes phone restart.
In my opinion smartass + noop : 832-312
In that options 8 hours of listening music and my phone from 100% go to 85%

Categories

Resources