Database Develop

[Q] Gingerbread 2.3.6. cannot enter to recovery menu

Hi,
I bought galaxy ace a week ago... updated via the latest gingerbread 2.3.6. (official way). After few days of testing the phone I found out that it is quite slow therefore I decided to root it... there is the problem, I cannot enter to recovery menu (home + power), even to download menu (home + vol down + power), everytime I hold the above mentioned combination I got soft reset of the phone... no menu, no nothing. I could not find anything on the web.. Could you help me how to enter to recovery menu OR how to root to CM7.2. a CWM without entering to recovery menu.
I believe the recovery menu has been blocked with new gingerbread 2.3.6.
Thank you.

I don't think so (about the blocked recovery) ..u go on trying dude ..recovery mode is a bit tougher to get in stock rom ..u should get it on the 10th attempt ( at least) I believe ..btw there are rooting guides in this forum ...check them out
Proud to own an ANDROID
Prouder to be a part of XDA

does it mean that i should hold power + home for 10 soft restarts?

I think so here's a tip press the home button first ..keep it pressed and then press the power button UNTILL THE SCREEN COMES ON...recovery mode is tougher to get in stock rom(well at least for me )..in cm7 its nothing ..
Proud to own an ANDROID
Prouder to be a part of XDA

I tried to soft restart 10 times no luck... even with your tip...can anyone else help me please?

only odin can help you as if you are not able to get into any kind of recovery and want cwm then odin is the only path for you .. do backup contacts,sms if you want
all other things will be lost..
and if you don't want to loose things then choose to skip rooting and love what you have now
and 2.3.6 haven't blocked recovery btw as i am using it

I cant use ODIN as I cannot access to download menu (vol down + home + power). Anyone else who can me advice?

turn your phone off!
Now without pressing the power button!
Hold the center button and plug your charger!

Still does not work, any other solution?

Try this if you have root access then install ROM toolbox from the market and try going into recovery via the app
----------------
Sent from my Ace. Galaxy Ace

jumbobombo said:
Try this if you have root access then install ROM toolbox from the market and try going into recovery via the app
----------------
Sent from my Ace. Galaxy Ace
Click to expand...
Click to collapse
Dude read the post properly I guess he's on stock rom and the only way of rooting gingerbread is the update.zip method ( correct me if I'm wrong ) ..so there's no way he could have root access ...
Proud to own an ANDROID
Prouder to be a part of XDA

Try adb
Adb reboot recovery
herpderp © aint got money to pay to my fish

Dragonoid said:
Dude read the post properly I guess he's on stock rom and the only way of rooting gingerbread is the update.zip method ( correct me if I'm wrong ) ..so there's no way he could have root access ...
Proud to own an ANDROID
Prouder to be a part of XDA
Click to expand...
Click to collapse
Ohhhh yeah... Srry my bad
----------------
Sent from my Ace. Galaxy Ace

Check this video.. Skip to 0:50
http://www.youtube.com/watch?v=3TCXm-1kTLM

NJosh said:
Check this video.. Skip to 0:50
http://www.youtube.com/watch?v=3TCXm-1kTLM
Click to expand...
Click to collapse
.... ****%n OUt!
HE CANNOT ENTER RECOVERY MODE!
If you bought that way you should take it back show problem and let service take care of that!
Say that you were trying to do a factory reset when you found out that you coudn´t enter recovery mode!

I'm on stock ROM, just flashed this morning using ODIN. Even root will go then. To go into recovery press the home+power button till the phone turns on, leave the power button not the home button. You should land up in recovery. If that doesn't work then try using ADB. Go to adb with your phone normally on:
adb reboot recovery
but try flash recovery again
to enter fastboot:
adb reboot bootloader
And if You've worked with ODIN then download a new bootloader and flash it using ODIN.I think (not sure) the problem is with secondary bootloader (SBL).Put the phone into download mode using ADB:
adb reboot download
This will put your phone in download mode. Check Odin now, and if ID:COM has turned yellow, you’re good to gnce you’re satisfied, press the Start button on Odin. The flash will take couple of seconds, after which your phone will reboot automatically.
That’s it. This should fix your download and recovery mode 3-button combo issue. You can now apply any mods with the normal procedure.
I bought galaxy ace a week ago... updated via the latest gingerbread 2.3.6. (official way).
Click to expand...
Click to collapse
You had mentioned updating to 2.3.6 in the official way? Kies or Service center? If Kies then did you get the download mode when it was updating? And No, Recovery is not blocked on 2.3.6

Xr01d_GT said:
I'm on stock ROM, just flashed this morning using ODIN. Even root will go then. To go into recovery press the home+power button till the phone turns on, leave the power button not the home button. You should land up in recovery. If that doesn't work then try using ADB. Go to adb with your phone normally on:
adb reboot recovery
but try flash recovery again
to enter fastboot:
adb reboot bootloader
And if You've worked with ODIN then download a new bootloader and flash it using ODIN.I think (not sure) the problem is with secondary bootloader (SBL).Put the phone into download mode using ADB:
adb reboot download
This will put your phone in download mode. Check Odin now, and if ID:COM has turned yellow, you’re good to gnce you’re satisfied, press the Start button on Odin. The flash will take couple of seconds, after which your phone will reboot automatically.
That’s it. This should fix your download and recovery mode 3-button combo issue. You can now apply any mods with the normal procedure.
You had mentioned updating to 2.3.6 in the official way? Kies or Service center? If Kies then did you get the download mode when it was updating? And No, Recovery is not blocked on 2.3.6
Click to expand...
Click to collapse
hi all i got the same problem on 2.3.6, however i tried the adb method n is not workin either ....~~ anyone else any idea ??

noty81 said:
hi all i got the same problem on 2.3.6, however i tried the adb method n is not workin either ....~~ anyone else any idea ??
Click to expand...
Click to collapse
If even adb isn't working
I would take it in to the service center and tell them you can't access (stock)recovery
Sent from my GT-S5830 using my hands

yeps it might be difficult first time,,,but never after i found it difficult,,,,
u need a working hand and usable brain....
hold the middle button and power button and as when u see the start screen just let go off the power button but still hold on middle button,,,
and u are in recovery mode...
same goes for download mode
keep hold on the vol down+middle button+power and then just let go off power button as u see the start screen(rather anything coming on screen )
enjoy
---------- Post added at 02:25 PM ---------- Previous post was at 02:21 PM ----------
there is also an app in market ... quick boot or speed boot something like that...
and it DOESNT need root permission (long time no use so dont remember exactly but it should be)
u can try that

I had the same problem, but luckily I found this thread.
I can enter to recovery ONLY with adb reboot recovery command, pressing home button does nothing.

[Q] Flash Custom ROM with Odin?

Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...

If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.

surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843

Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP

KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843

same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery

Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset

Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....

Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh

surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro

HELP Me problem CWM button

Hi,
I installed cwm v6 which installed correctly but once i rebooted the device - it landed on recovery mode only. And from recovery i cant select any option either, when i press home button it just scrolls down and power button also not working. I only can go up and down but no select
Help me guys. very appreciate it
if cant repair this, someone can teach me how to change to other recovery mode using ODIN
my device i9001

Try to use menu button or back button. Does it work?

You should be able to flash a Kernel for example Semaphore over ODIN. The .tar files can be flashed after you have set your phone in download mode..

thanks to all reply, i reset my phone with odin use stock rom and flash back with touch cwm. now its working

n7000 battery power button problem

I experienced power button problem, after flashing latest build (4.4.2 on note n7000) my phone rebooted and and once it got back in system I couldnt turn off screen from power button or shut down phone, so i tried to remove battery and start again. But it is the same. So i didnt know what to do, i installed reboot recovery app to try to flash earlier build and from philz kernel (touch based) flashed raw4 kernel and now in recovery my power button stilll dont work, I can not flash anything I cant reboot in sistem . What to do?
p.s. I tried removing a battery and as soon as i inserted it the phone boots in recovery automaticly (like the power buttton is pressed all the time ?), and still power button wont work
I can go into download mode with Volume up and home button (and again like power button is all the time presed but i am not pressing it) and i could go to download mode and i have odin 1.85 on my computer and i could flash raw5 kernel or asylum kernel just to boot in system and use OS, but RAW5 iz ZIP extension like ASYlum,( i guess i need tar file extensions for odin?) so i dont know what to do via odin? What do you think? And thank you so much.. for you time reading this.

[Q] Bootloop: Broken Home Button

Hi.
My note bootloop after trying new kernel. Forgot the kernel bcoz it happen 3 months ago.
The issues:
1. Home button broken. So i cant go to recovery mode.
2. Try using adb reboot to recovery but device is not detected. My phone keep rebooting.
3. The phone can go to download mode only. (using usb jig)
4. Try flash stock rom, others kernel but the problem still.
im trying search for this problem but the solution only i must boot to recovery.
Sorry for my bad english.
Thanks.

mikagami29 said:
Hi.
My note bootloop after trying new kernel. Forgot the kernel bcoz it happen 3 months ago.
The issues:
1. Home button broken. So i cant go to recovery mode.
2. Try using adb reboot to recovery but device is not detected. My phone keep rebooting.
3. The phone can go to download mode only. (using usb jig)
4. Try flash stock rom, others kernel but the problem still.
im trying search for this problem but the solution only i must boot to recovery.
Sorry for my bad english.
Thanks.
Click to expand...
Click to collapse
after flashing stock rom using odin when device restarts remove usb jig and press home and volume plus to go to recovery mode.. then clear cache and dalvik cache .. tis should solve ur problem. tricky part is after completion of odin flash u have to quickly go to recovery using volume and home button once the flash is complete so that when device restarts u can go to recovery direct.