Hi,
I installed cwm v6 which installed correctly but once i rebooted the device - it landed on recovery mode only. And from recovery i cant select any option either, when i press home button it just scrolls down and power button also not working. I only can go up and down but no select
Help me guys. very appreciate it
if cant repair this, someone can teach me how to change to other recovery mode using ODIN
my device i9001
Try to use menu button or back button. Does it work?
You should be able to flash a Kernel for example Semaphore over ODIN. The .tar files can be flashed after you have set your phone in download mode..
thanks to all reply, i reset my phone with odin use stock rom and flash back with touch cwm. now its working
Related
Hi... The power button in my Captivate doesn't work, so the problem is that i wanna flash Illuminance o Sparko ROM, both whith Samurai Kernel, but i don't know if i can use a software button (like, search or home) to use the recovery mode instead the power button......... Any ideas?
I'm using Apex 11 whith DarkCore and i can use the search button to select an option....
U can install the .tar version of the Samurai Kernel through Odin (u just need download mode of course) and then u can adb reboot recovery to get u into the CWM Recovery so u can install the Rom.
But u may want to Odin the i897 Gingerbread Bootloaders as well (recommended by IlluminatedOne per the Install instructions for his Rom), if u have the i9000 ones right now.
Once you get into recovery mode using 4-2ndtwin's method, you can use the soft keys to move around (at least you can in CWM 5). Menu is up, Home is down, Back is back, and Search is select.
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
I need your help here. Coud´t not find an anwser anywhere.
I tried to use ROM Manager (premium) to flash ClockWorkMod recovery on my P7300. It did not work and after reboot into recovery the screen flashes some lines and then goes dark. If I try to turn it on I get the same result.
If I try to go in recovery mode manually (by pressing on/off and Volume button) I get the same result. I can go to download mode but as soon I try to flash a stock rom via odin3 it does not work either and I get a fail in the first blok (of odin3). Drivers are OK, Odin3 gives a yellow comport number so it seems that the USB connection is OK.
Any help will be appriciated.
dutchguy2 said:
I need your help here. Coud´t not find an anwser anywhere.
I tried to use ROM Manager (premium) to flash ClockWorkMod recovery on my P7300. It did not work and after reboot into recovery the screen flashes some lines and then goes dark. If I try to turn it on I get the same result.
If I try to go in recovery mode manually (by pressing on/off and Volume button) I get the same result. I can go to download mode but as soon I try to flash a stock rom via odin3 it does not work either and I get a fail in the first blok (of odin3). Drivers are OK, Odin3 gives a yellow comport number so it seems that the USB connection is OK.
Any help will be appriciated.
Click to expand...
Click to collapse
Same problem here as you described....so if any of you guys can help...pls..
Pls..
Sent from my GT-N8000 using xda premium
Can it be done? How to do it?
through Odin. make sure it's for the i9305
The most recent CWM ported is in this thread, which also contains a link to Odin. Make sure Kies isn't running and that you have the right USB drivers, open Odin, put your phone in download mode (turn it off, then hold volume down + home while you turn it on again), connect your phone to your PC, and flash the .tar.md5 file as PDA.
1. First, download Odin from this link
Make sure you have the drivers for your phone installed. *If not download KIES from the Samsung site and install*
2. Plug your phone into the computer and start Odin.
3. Shutdown your phone and boot it in to download-mode by pressing Vol. down + home + power
4. Press the PDA-button in Odin and select your CWM-recovery file.
5. Make sure that Auto Reboot and F. Reset Time checkboxes are selected.
6. When flashing is done you will se a message "PASS" and your device should restart automatically.
Congratiulations, you now have CWM flashed on your phone
Here's a link to a CWM recovery flashable file if you not have one alreddy. LINK
Creds for the CWM-recovery file upload goes to codeworkx
I have flashed the cwm file through odin. It passed but when I go into recovery it is still the stock recovery and not cwm. Why?
I've gotten the same problem. So.. i flashed the recovery, but whej the phone restarted i shut it down without booting.(i removed the battery when the s3 lte screen showed up). Then i entered recovery and it worked. (S3 lte reflashes stock recovery and other stock things on stock kernel when booting). If you want permanent cwm recovery, flash a custom kernel! I hope this will help you!
Sent from my GT-I9305 using XDA Premium HD app
I used this one http://forum.xda-developers.com/showthread.php?t=2140681
Seems to work fine for me
Sean.
Hi guys, so i got a new Mini2, and... messed with it, pulled a firmware version from a dif zone by mistake... after i had cwm jena and clockworkz working, installed that asian firmware, and never got the phone to work again, tried several stock rom installs (17 and counting, with/without jena firmware download also), it just keeps doing the boot loop, and i can't access the Recovery menu (vol +/- home power buttons at start).
I've been reading all the meaningful threads here, tried doing button combination with battery, without and nothing seems to work.
Any and all help will be greatly appreciated.
Take it to samsung service senter if u got warranty and if isnt try to use another mini 2 battery but I think it may not work and try to press all butoms at same time for 2min and if nothing work buy or make a JTag
Sent from my GT-S6500D using xda app-developers app
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Worked...
brainscollector said:
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Click to expand...
Click to collapse
You sir... you are my new hero! key trick is pressing the recovery combination quick before logo appears and ... guess what i was holding the damn buttons so hard i was thinking they'd eventually lose pressure
My mini2 is alive :angel:
I'm glad to help you cheers
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
mihaivt said:
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
Click to expand...
Click to collapse
Did flash a incompatible kernel? Try flashing stock kernel, recovery adn ROM.