[Q] Can not enter recovery mode anymore - Galaxy Tab 8.9 General

I need your help here. Coud´t not find an anwser anywhere.
I tried to use ROM Manager (premium) to flash ClockWorkMod recovery on my P7300. It did not work and after reboot into recovery the screen flashes some lines and then goes dark. If I try to turn it on I get the same result.
If I try to go in recovery mode manually (by pressing on/off and Volume button) I get the same result. I can go to download mode but as soon I try to flash a stock rom via odin3 it does not work either and I get a fail in the first blok (of odin3). Drivers are OK, Odin3 gives a yellow comport number so it seems that the USB connection is OK.
Any help will be appriciated.

dutchguy2 said:
I need your help here. Coud´t not find an anwser anywhere.
I tried to use ROM Manager (premium) to flash ClockWorkMod recovery on my P7300. It did not work and after reboot into recovery the screen flashes some lines and then goes dark. If I try to turn it on I get the same result.
If I try to go in recovery mode manually (by pressing on/off and Volume button) I get the same result. I can go to download mode but as soon I try to flash a stock rom via odin3 it does not work either and I get a fail in the first blok (of odin3). Drivers are OK, Odin3 gives a yellow comport number so it seems that the USB connection is OK.
Any help will be appriciated.
Click to expand...
Click to collapse
Same problem here as you described....so if any of you guys can help...pls..
Pls..
Sent from my GT-N8000 using xda premium

Related

Samsung Galaxy S

I installed I897UCJF6-final-CSO REV0 it is Odin3 One-Click downloader and I started it on the PC and USB cable for mobile in PC and installed it. Everything went great and now when I want turn on the phone show me pictures of the "at&t world phone" and mobile phone constantly restarts... not impossible at all turned on. Does anyone know what should I do?
Hi , if you can get into recovery try reflashing ....if you cannot get into recovery you will probably have to get into download mode and flash a stock rom .
imgibby123 said:
Hi , if you can get into recovery try reflashing ....if you cannot get into recovery you will probably have to get into download mode and flash a stock rom .
Click to expand...
Click to collapse
But how to get in download mode? volume down+middle button+power? If is that... this not work Mobile is again restarting.... Can I get on other way to download mode?
rigzrk said:
But how to get in download mode? volume down+middle button+power? If is that... this not work Mobile is again restarting.... Can I get on other way to download mode?
Click to expand...
Click to collapse
you will have to buy a usb jig(ebay £2) this will force download mode.
As long as it boots up, there is no problem. Try the following (you will need some help):
1. Pull the battery
2. Press Volume down+Homebutton+Power at the same time
3. Let a friend put the battery back into the phone while you are pressing the buttons.
Maybe the phone will go into DL mode so you can flash a new ROM. I advise you to flash a clean stock ROM from sammobile.
If this doesn't work, you will need a JIG.
Cheers!

[Q] Flash Custom ROM with Odin?

Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro

[Q] Help unbricking Samsung Galaxy Ace S5830

Hello everyone,
I've been using this community for a while, but this is my first post. One or two months ago I successfully rooted my Samsung Galaxy Ace S5830 and installed Imaginary ICS Final along with CWM Recovery 5.0.2.6. Everything worked fine but today I decided to update to a 4.4 custom rom. I installed CM 11 from this post http://forum.xda-developers.com/showthread.php?t=2659269, but after selecting my language a popup apeared which said "The setup aplication has stopped working", so I looked for another ROM. I found this one http://forum.xda-developers.com/showthread.php?t=2684893, but it required TWRP Recovery to be installed. I downloaded it, copied it to my SD and tried to install it form CWM 5.0.2.6.
Now, my phone goes into a blue screen whether I try to boot normally or into the recovery menu and I don't now how to solve it. Since I can boot into download mode, I've tried using Odin, but it doesn't recognize my phone. Can anyone help me, please? Thanks a lot in advance.
PS: I'm using Windows 8.1 x64.
EDIT: Now Odin recognizes it, but it gets stuck in "<1> setup connection...".
EDIT 2: I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
de1mos said:
Hello everyone,
I've been using this community for a while, but this is my first post. One or two months ago I successfully rooted my Samsung Galaxy Ace S5830 and installed Imaginary ICS Final along with CWM Recovery 5.0.2.6. Everything worked fine but today I decided to update to a 4.4 custom rom. I installed CM 11 from this post http://forum.xda-developers.com/showthread.php?t=2659269, but after selecting my language a popup apeared which said "The setup aplication has stopped working", so I looked for another ROM. I found this one http://forum.xda-developers.com/showthread.php?t=2684893, but it required TWRP Recovery to be installed. I downloaded it, copied it to my SD and tried to install it form CWM 5.0.2.6.
Now, my phone goes into a blue screen whether I try to boot normally or into the recovery menu and I don't now how to solve it. Since I can boot into download mode, I've tried using Odin, but it doesn't recognize my phone. Can anyone help me, please? Thanks a lot in advance.
PS: I'm using Windows 8.1 x64.
EDIT: Now Odin recognizes it, but it gets stuck in "<1> setup connection...".
Click to expand...
Click to collapse
You usually get the "setup connection" error when you are in the Emergency Download Mode instead of Download Mode. You go to Emergency Download Mode by holding down Volume Up + Volume Down + Home Button + Power Button in which it loads a screen that says "Emergency Download Mode" and you go to Download mode by holding down Volume Down + Home Button + Power Button in which it does load the correct download screen with the yellowish message that say "Downloading…". Please make sure you are going to the Download Mode. Then try to flash again. Do post the result. Hope I Helped
Phone should detect in odin if you've Installed proper drivers for your phone.
Try this guide,
http://forum.xda-developers.com/showthread.php?t=2609021
Sent from my Galaxy Ace GT-S5830 using xda app-developers app
mahithm said:
You usually get the "setup connection" error when you are in the Emergency Download Mode instead of Download Mode. You go to Emergency Download Mode by holding down Volume Up + Volume Down + Home Button + Power Button in which it loads a screen that says "Emergency Download Mode" and you go to Download mode by holding down Volume Down + Home Button + Power Button in which it does load the correct download screen with the yellowish message that say "Downloading…". Please make sure you are going to the Download Mode. Then try to flash again. Do post the result. Hope I Helped
Click to expand...
Click to collapse
You're right, I was entering Emergency Download Mode (the one which says ARM9 mode). However, if I enter the normal download mode and plug my phone, Odin doesn't recognize it and Windows shows a message in the traybar which says "Can't recognize USB device".
brijeshep said:
Phone should detect in odin if you've Installed proper drivers for your phone.
Try this guide,
http://forum.xda-developers.com/showthread.php?t=2609021
Sent from my Galaxy Ace GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I've followed it step by step and Odin still doesn't recognize my phone.
de1mos said:
You're right, I was entering Emergency Download Mode (the one which says ARM9 mode). However, if I enter the normal download mode and plug my phone, Odin doesn't recognize it and Windows shows a message in the traybar which says "Can't recognize USB device".
I've followed it step by step and Odin still doesn't recognize my phone.
Click to expand...
Click to collapse
Try this link on how to install stock rom using odin along with all firmwares. Go to the "Preparation" section where you will find all the necessary downloads including the drivers.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Do post the result. Hope I Helped
Thanks a lot, but I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
de1mos said:
Thanks a lot, but I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
Click to expand...
Click to collapse
Glad to hear that buddy
try updating ur drivers online first, go to the download mode by pressing the vol up, down and the power button simultaneously, and then odin vud recognise it..
when u have successfully installed the stock rom from Odin, go to recoverymode, then to clockworkmod, remove cahe and dalvik data and then install the rom that u want.
This shud do as it worked for me..
Hit the "Thanks" button if it helped..
ShardulS. said:
try updating ur drivers online first, go to the download mode by pressing the vol up, down and the power button simultaneously, and then odin vud recognise it..
when u have successfully installed the stock rom from Odin, go to recoverymode, then to clockworkmod, remove cahe and dalvik data and then install the rom that u want.
This shud do as it worked for me..
Hit the "Thanks" button if it helped..
Click to expand...
Click to collapse
Bro, this question is solved. See "Edit 2" in the question where the author has specified what he did to solve this problem.

[Q] GT-S5570 Bricked (need help)

Hi,
I have a GT-S5570 in my hand, actualy....its my friends. It was broken because of fail OTA upgrade. The laucher always freezing. Knowing that, I want to help him to reflashing it. When I checked, I cannot go to download or recovery mode using combo button. I can go to download mode using adb command and it work. I can install CWM (tass-recovery-cwm.tar) which I get it from some site. I can go to CWM recovery mode, I can select the menu using volume button, but I cannot choose the menu using home button. So I try to install several CWM version. First, I try to install clockworkmod-5.0.2.8.tar.md5 (But I'm forget from where I download this file). After flashing and restart, the phone won't start the system. It always stuck on samsung logo and then restarting again. I cannot reflash, because odin no recognizing it, even adb cannot connent to device.
I use jig too (with 301K resistor), but it failed.
Conclusion:
USB JIG : FAILED
Combo button (home+power, home+vol down+power, home+vol down+vol up) : FAILED
Combo button (home+vol up) : FAILED. it only show text below :
lcd_backlight_ctrl start
determine_lcd_type, LCD Type:61bc11
Anyone can help me how to go to download mode on this situation?
If you see the samsung logo you can still go in fastboot, because this last is previous. By phone off go in fastboot and if odin doesn't recognize the phone you probably have a driver problem.

[Q] Softbricked my phone... need help!

Hi,
So I try to flash my phone with Odin, but it seems I made a mistake. It's a long story... When I go back to stock rom from custom, I use Odin and my phone goes to a bootloop. Then I try to reflash stock rom with Odin again and I have the same problem every time. I like to clear cache/user but when my phone goes to recovery mode I can't navigate with hardware buttons (not hardware issue) just the power button works so I can't do nothing here. Ok here start a strange part (for me) bc. download mode it's not accessible with key combination just from command line and when I get download mode I try to flash twrp recovey with Odin but the result is sofbrick. My phone not recognized by Odin and adb commands not working anymore. I can't access recovery or download mode. My phone stay on logo and nothing happen.
Thank You for any solution!
P
djbalogi said:
Hi,
So I try to flash my phone with Odin, but it seems I made a mistake. It's a long story... When I go back to stock rom from custom, I use Odin and my phone goes to a bootloop. Then I try to reflash stock rom with Odin again and I have the same problem every time. I like to clear cache/user but when my phone goes to recovery mode I can't navigate with hardware buttons (not hardware issue) just the power button works so I can't do nothing here. Ok here start a strange part (for me) bc. download mode it's not accessible with key combination just from command line and when I get download mode I try to flash twrp recovey with Odin but the result is sofbrick. My phone not recognized by Odin and adb commands not working anymore. I can't access recovery or download mode. My phone stay on logo and nothing happen.
Thank You for any solution!
P
Click to expand...
Click to collapse
Hi to all...
i've got the same problem...
any idea???
thanks in advance...
Edy

Categories

Resources