Database Develop

[Q] Crashed after Cognition ROM 217 install

Had the cognition 216 ROM installed and working. Then tried to install the cognition 217 unhelpful ROM. It failed during the install of the files. Now I am unable to get the phone into download mode. It will go back into recovery mode. I have tried all the button combos for download mode. All I get is the battery image. Any help would be appreciated.

bubbasbaitshop said:
Had the cognition 216 ROM installed and working. Then tried to install the cognition 217 unhelpful ROM. It failed during the install of the files. Now I am unable to get the phone into download mode. It will go back into recovery mode. I have tried all the button combos for download mode. All I get is the battery image. Any help would be appreciated.
Click to expand...
Click to collapse
Which button combos did you try for download mode? Since you see the battery image, I believe you should be able to get back to download mode.

if it will go into recovery mode, then it will go into download mode....
method 3 in the ONE CLICK ODIN STOCK ROM thread....
designgears said:
Method 3KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold both Volume buttons (from i9000 just down, don't touch the power button)
Plug in the USB cable and continue holding both Volume buttons
Click to expand...
Click to collapse

holding the volume buttons down. It goes to the battery image. I will try again and see if I get different results. Took out the battery, no sim, pushed in the center of volume button, boots into recovery screen.

I can get the phone into the recovery screen no problem. Using the volume buttons does not get me into download mode. If I hold the volume bottons, it still boots into the recovery screen.

http://forum.xda-developers.com/showthread.php?t=723596
on the table of contents, click post 3: adb tutorial and follow the instructions on there until you get to where the command prompt says something like "\android-sdk-windows\tools\", plug your phone in through usb while it is recovery mode and in the command prompt type "adb reboot download" and unplug your phone immediately after the screen goes black. it will then boot into download mode, so open odin on your computer, for whatever you want to flash, plug the phone back in, and click start on odin.
edit: fixed the url

That got it. Was not aware that you could still use the SDK at this point. It is restoring from ODIN. Many thanks.

[Q] Flash Custom ROM with Odin?

Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...

If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.

surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843

Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP

KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843

same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery

Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset

Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....

Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh

surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro

[Q] Can not enter recovery mode anymore

I need your help here. Coud´t not find an anwser anywhere.
I tried to use ROM Manager (premium) to flash ClockWorkMod recovery on my P7300. It did not work and after reboot into recovery the screen flashes some lines and then goes dark. If I try to turn it on I get the same result.
If I try to go in recovery mode manually (by pressing on/off and Volume button) I get the same result. I can go to download mode but as soon I try to flash a stock rom via odin3 it does not work either and I get a fail in the first blok (of odin3). Drivers are OK, Odin3 gives a yellow comport number so it seems that the USB connection is OK.
Any help will be appriciated.

dutchguy2 said:
I need your help here. Coud´t not find an anwser anywhere.
I tried to use ROM Manager (premium) to flash ClockWorkMod recovery on my P7300. It did not work and after reboot into recovery the screen flashes some lines and then goes dark. If I try to turn it on I get the same result.
If I try to go in recovery mode manually (by pressing on/off and Volume button) I get the same result. I can go to download mode but as soon I try to flash a stock rom via odin3 it does not work either and I get a fail in the first blok (of odin3). Drivers are OK, Odin3 gives a yellow comport number so it seems that the USB connection is OK.
Any help will be appriciated.
Click to expand...
Click to collapse
Same problem here as you described....so if any of you guys can help...pls..
Pls..
Sent from my GT-N8000 using xda premium

[Q] Soft Bricked Mini2?... Help plz

Hi guys, so i got a new Mini2, and... messed with it, pulled a firmware version from a dif zone by mistake... after i had cwm jena and clockworkz working, installed that asian firmware, and never got the phone to work again, tried several stock rom installs (17 and counting, with/without jena firmware download also), it just keeps doing the boot loop, and i can't access the Recovery menu (vol +/- home power buttons at start).
I've been reading all the meaningful threads here, tried doing button combination with battery, without and nothing seems to work.
Any and all help will be greatly appreciated.

Take it to samsung service senter if u got warranty and if isnt try to use another mini 2 battery but I think it may not work and try to press all butoms at same time for 2min and if nothing work buy or make a JTag
Sent from my GT-S6500D using xda app-developers app

go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)

Worked...
brainscollector said:
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Click to expand...
Click to collapse
You sir... you are my new hero! key trick is pressing the recovery combination quick before logo appears and ... guess what i was holding the damn buttons so hard i was thinking they'd eventually lose pressure
My mini2 is alive :angel:

I'm glad to help you cheers

I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?

mihaivt said:
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
Click to expand...
Click to collapse
Did flash a incompatible kernel? Try flashing stock kernel, recovery adn ROM.

[Q] How to boot into recovery mode with power button /adb (bricked phone)

Here is my situation..
- My Note soft-bricked, keep looping the samsung logo.
- Power Button broken, tried solder new button, but not working, seems the power circuit got faulty.
- I can enter download mode
- Tried flash different rom with/without pit through odin, still same
- adb can't find device while bootloop
I think the bootloop can be solved by wiping the cache, but the problem is I can't enter recovery mode.
Please help..thanks.

teohjk said:
Here is my situation..
- My Note soft-bricked, keep looping the samsung logo.
- Power Button broken, tried solder new button, but not working, seems the power circuit got faulty.
- I can enter download mode
- Tried flash different rom with/without pit through odin, still same
- adb can't find device while bootloop
I think the bootloop can be solved by wiping the cache, but the problem is I can't enter recovery mode.
Please help..thanks.
Click to expand...
Click to collapse
I manage to solve my problem after trying several days.
Here is my solution, in case there is any people facing the same problem. Hope it helps
- Download KJ1 ROM (d-h.st/HJM) and flash through ODIN.
- ADB is able to access even though in bootloop condition
- it come with CMW 5 that able to select using HOME button in stead of POWER button
- After flashing the ROM through ODIN, access ADB while Samsung logo shown up.
- Command:
adb devices
adb reboot recovery
- Then you will able to access to CMW 5 Recovery, you can do full wipe and install a working ROM there..
- Done..