Related
who's using them? i horribly failed at putting one on today (a free one that came with my case..looked crappy though with tons of bubbles between the 3 layers before i even put it on lol) but yeah, i'm real bad at putting protectors on tablets because it kept coming out crooked because of that damn home button etc.
anyway, i've got a pack of 5 coming in the mail sometime this week, and i'm wondering if i should even bother attempting again, or just use it naked. it feels so good without a protector, but i'm afraid of scratching the screen. i've been using screen protectors since 2011 with my HTC Rezound, so idk what to do. i always end up with tiny scratches on my protectors, so i'm thinking i'll end up scratching the screen..
jayochs said:
who's using them? i horribly failed at putting one on today (a free one that came with my case..looked crappy though with tons of bubbles between the 3 layers before i even put it on lol) but yeah, i'm real bad at putting protectors on tablets because it kept coming out crooked because of that damn home button etc.
anyway, i've got a pack of 5 coming in the mail sometime this week, and i'm wondering if i should even bother attempting again, or just use it naked. it feels so good without a protector, but i'm afraid of scratching the screen. i've been using screen protectors since 2011 with my HTC Rezound, so idk what to do. i always end up with tiny scratches on my protectors, so i'm thinking i'll end up scratching the screen..
Click to expand...
Click to collapse
I was thinking about picking up some myself. Which ones did you order?
Put one on but spend at least 10 bucks for a decent one. Illunisheild thats the one I got from amazon for the 8.4 its pretty good.
I got these:
http://www.ebay.com/itm/161361388722?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Sent from my SM-T700 using Tapatalk
I always put screen protectors on all of my phones and tablets. I've just put one on my Tab S 8.4, had a few dusts under the protector. usually I would rip it out and try again, but I thought not today! Because fortunately the screen protector came with some stickers to help get rid of the dust.
Happy to say it is dust and bubble free now. Although it is not one of those fancy screen protectors, just a cheap one called elec shield.
invisible shield is the best.
will6316 said:
Put one on but spend at least 10 bucks for a decent one. Illunisheild thats the one I got from amazon for the 8.4 its pretty good.
Click to expand...
Click to collapse
I ordered these from Amazon as well. Should be in today.
I'll give it a try and see if I like it. Probably gonna feel weird at first though.
I too would like to buy one. I asked ismooth on twitter but they are not gonna make one for the tab S (I have one for my note 3 and it's just perfect).
I think I'm gonna go Invisibleshield. It's not cheap but I've only heard good things about their products :good:
anyone have any tricks as to how to get it on nice and straight on the tablets? I'm bad at tablets for protectors but decent at phones. I saw one idea where you place it down on the screen then tape the sides like a hinge, then you flip it over, peel it off, and just flip it back and lay it on the tablet and it should line up perfectly. wonder if it works.
Sent from my VS980 4G using Tapatalk
jayochs said:
anyone have any tricks as to how to get it on nice and straight on the tablets? I'm bad at tablets for protectors but decent at phones. I saw one idea where you place it down on the screen then tape the sides like a hinge, then you flip it over, peel it off, and just flip it back and lay it on the tablet and it should line up perfectly. wonder if it works.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
That's exactly what I did. Works perfectly. The screen protector I bought even came with the positioning tape and stickers for dust removal. But you can just use Scotch tapes.
Mr shield
I have used many different screen protector products. I like spigen and I just installed the Mr shield ones. The are two finishes. Clear and matte. The matte finish cuts a lot of glare but impacts out door viewing. I now have the clear and love it. No bubbles. I have several videos on screen protectors that show tips on install . Herr is my initial install http://youtu.be/NHzarYjTtzE
kliu888 said:
That's exactly what I did. Works perfectly. The screen protector I bought even came with the positioning tape and stickers for dust removal. But you can just use Scotch tapes.
Click to expand...
Click to collapse
sweet! i'll give it a try when they come in
Putting on a screen protector reminds one of what a dirty filthy planet we live on. There is dust EVERYWHERE. One tried and true method is to run a hot shower in your bathroom for 10 minutes with the door closed until the room steams up. This pulls all of the airborne dust from the air. Turn the shower off, and use the tape hinge method to apply the protector.
Despite your best efforts you are likely to STILL get that ONE DAMNED PIECE OF DUST FROM HELL that manages to somehow get on the screen. If that happens, DO NOT TRY TO PEEL THE PROTECTOR UP FROM THE EDGE because if you bend it at all it will never seat again properly and you'll have a bubble that won't go away. Use tape to stick to the outside near the corner and gently lift that way, then use another piece of tape to grab the dust particle.
One negative of putting a screen protector on a tablet this size. Unless the protector is tempered glass, you are likely to feel a bit of drag as you swipe the screen - no plastic will ever feel as smooth as glass - and because the area is larger than your phone, you'll notice the resistance more. Also, unless the screen protector has an oleophobic coating, it will be harder to clean greasy fingerprints of it than from glass. Last point, most screen protectors are actually softer than glass so you are likely to get it pretty scratched up which, while saving your glass, leaves you with a scratched up viewing surface you have to look at. The alternative is to buy a screen protector with a hardness of 9 or above with an oleophobic coating but those tend to be a lot more expensive.
Get a pack of 3 or more if you can. You WILL screw it up a few times and you WILL want to replace them occasionally as they get scratched up pretty easily depending upon how anal you are about such things.
good advice, thanks! but do you guys think this thing needs one in the end? I know gorilla glass is pretty soft and scratches easily so idk..
Sent from my SM-T700 using Tapatalk
jayochs said:
good advice, thanks! but do you guys think this thing needs one in the end? I know gorilla glass is pretty soft and scratches easily so idk..
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
I don't believe this tablet has Gorilla Glass, at least I don't believe the specs say so (could be wrong?). So yes, it could scratch easily. You can try and be careful but all takes is a tiny bit of grit on your finger, stylus or wiping cloth and you are done, Gorilla Glass or no.
Actually you know, skip the steamy bathroom. Just do it in a dry room but use a strip of masking tape and screen until every bit of dust is gone. Also remember, after you place the protector on the screen with the taped hinge, make sure you clean the screen again because it will get dust on it from the bottom of the protector.
Mr Shield makes very good inexpensive protectors.
http://www.amazon.com/gp/product/B00KATOH2S/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
perfect install on first one using the painters tape technique.
heres how
https://www.youtube.com/watch?v=PMPqDwVZzzM
Why put a cheap screen protector on a premium device like the tab s. The best deserves the best or better. my screen protector cost 2 for 13 and a tempered glass on is on its way for $18. You cant even tell there on when installed correct.
will6316 said:
Why put a cheap screen protector on a premium device like the tab s. The best deserves the best or better. my screen protector cost 2 for 13 and a tempered glass on is on its way for $18. You cant even tell there on when installed correct.
Click to expand...
Click to collapse
Be very careful with the tempered glass protector. NEVER left it up by the edges - use tape. They bend VERY easily and once bent will never lay down flat properly again. Every tempered glass protector I've ever used developed sealing problems along the edges, especially near the home button. YMMV but that is my experience.
There aren't good selection of screen protectors in the UK. Looked in Amazon, Ebay, Google, nothing with quality. So I only got the Elec shield.
I'd get tempered glass if I could, but as long as I screen is protected for now, then I'm happy enough.
Hey everyone. So I just got my brand new droid turbo and was wondering what brand and type of screen protector you are using and if you recommend it.
I understand the general pros and cons of matte vs glossy, but with the droid turbo having a quadHD display and having the pixels not so close to the top of the screen as other phones (from what I heard) should that affect choosing one over the other?
Thanks for any and all input!
Waiting for zagg glass or zagg invisishield HD... don't get anything else.
I've been a long time Zagg user, but picked up the Skinomi - http://www.amazon.com/gp/product/B00OYX80W4/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 Put it on last night and pretty happy with how easy it went on and the fact it fit pretty much edge to edge (a little shy on the bottom but since I'm using the Tech21 case from Verizon pretty unnoticable. A lot cheaper than the Zagg but quality seems on par. It will be interesting to see how it holds up.
The skinomi looks like a quality product. How is the 'drag' when sliding your finger across the screen compared to zagg?
Mikey503 said:
The skinomi looks like a quality product. How is the 'drag' when sliding your finger across the screen compared to zagg?
Click to expand...
Click to collapse
Non-existent. Comparable to a Zagg HD screen, no orange peel feel on the Skinomi. I think I'm noticing a little more finger oil left behind on the Skinomi vs. the Zagg but not enough to be noticeable and not 100% sure. The screen fit is much better than the Zagg's I put on my wife and son's MotoX's.
rgerrans said:
I've been a long time Zagg user, but picked up the Skinomi - http://www.amazon.com/gp/product/B00OYX80W4/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 Put it on last night and pretty happy with how easy it went on and the fact it fit pretty much edge to edge (a little shy on the bottom but since I'm using the Tech21 case from Verizon pretty unnoticable. A lot cheaper than the Zagg but quality seems on par. It will be interesting to see how it holds up.
Click to expand...
Click to collapse
Just ordered one. I'll let you guys know how I like it. I have used every other screen product known to man
Sent from my XT1254 using Tapatalk
Just ordered the Skinomi.
Sent from my XT1254 using Tapatalk
Edit: I echo a later comment about 'dents' in the Skinomi. I imagine it's the same property that allows for self healing, but it's making me crazy. I've ordered
Motorola Droid Turbo (Verizon) XT1254 Tempered Glass Screen Protect... http://www.amazon.com/dp/B00P8V5J4I/ref=cm_sw_r_udp_awd_RvFGub1RNXY44 and will follow up.
1/7/15 the tempered glass is great. Fits great.
Skinomi has been great so far. I also will note, that once the application fully dried there was no clarity issues (rainbowing) that I've have had in the past with some screen protectors.
I'm not having a good experience with the skinomi. Ordered two a week ago for mine and my wife's turbo, they both went on ok, yet mine had some bubbles in the lower left corner, figured it would clear up in a day or two when all the solution dried up. Wrong, instead it peeled up and would not stick back down. Contacted skinomi for a replacement, recieved Monday, today the upper right corner on the new one peeled up... Bummed.
The upper right corner on the new one had the same type of little bubbles the lower left corner had on the previous. I think it's something to do with the adhesive underside..
I installed skinomi 3 days ago and so far so good. Clarity is solid and the feel of the screen, which is important to me, is smooth . My only problem is that the screen protector gets indents easily, even when I softly press my fingernail against it. I'm not sure if they will work themselves out after a while, but I wouldn't say it's a deal breaker since the product is still doing its job well.
Mikey503 said:
I installed skinomi 3 days ago and so far so good. Clarity is solid and the feel of the screen, which is important to me, is smooth . My only problem is that the screen protector gets indents easily, even when I softly press my fingernail against it. I'm not sure if they will work themselves out after a while, but I wouldn't say it's a deal breaker since the product is still doing its job well.
Click to expand...
Click to collapse
Unfortunately mine are not clearing up and I'm noticing more appearing Not really noticeable during regular use, just if I look for them but will have to see what the next few weeks brings...
I would advise anyone who is unsure to get an HD Clear screen protector. I've never really liked my husband's anti-glare very much. I think it takes away from the screen quality.
Skinomi no go
rgerrans said:
I've been a long time Zagg user, but picked up the Skinomi - http://www.amazon.com/gp/product/B00OYX80W4/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 Put it on last night and pretty happy with how easy it went on and the fact it fit pretty much edge to edge (a little shy on the bottom but since I'm using the Tech21 case from Verizon pretty unnoticable. A lot cheaper than the Zagg but quality seems on par. It will be interesting to see how it holds up.
Click to expand...
Click to collapse
So it started off well enough but what I noticed is that over time it continued to pick up more and more marks in the protector which never healed and now it's starting to peel up on the edges. Time to find another brand or just go naked since they give us one free screen replacement.
Posted in the glass thread but I am pretty satisfied with this so figure I would share....
If anybody is looking for Zagg quality (plastic glossy) screen protectors I will recommend the XtremeGuard wet install. Very easy to install and after 8 hours you will not have any bubbles. I will eventually get a tempered glass version but not right now as it seems the jury is mostly out still. This is a cheap ($1.99) fix. I am super picky on screen protectors and will stand by this guy. It fits exactly edge to edge. Total screen coverage with no overhang.
For reference, I worked at Best Buy (back in the day) and always used Zagg protectors and would say this rivals it for 10% of the price. Definitely worth a try for those feeling adventurous with the wet install. I hate the crappy dry installs..
Linky:
http://www.ebay.com/itm/Genuine-Xtr...l_Phone_Screen_Protectors&hash=item51c6268089
Now I am just waiting for people on here to recommend a Tempered glass that isn't garbage..
germanmafia88 said:
Posted in the glass thread but I am pretty satisfied with this so figure I would share....
If anybody is looking for Zagg quality (plastic glossy) screen protectors I will recommend the XtremeGuard wet install. Very easy to install and after 8 hours you will not have any bubbles. I will eventually get a tempered glass version but not right now as it seems the jury is mostly out still. This is a cheap ($1.99) fix. I am super picky on screen protectors and will stand by this guy. It fits exactly edge to edge. Total screen coverage with no overhang.
For reference, I worked at Best Buy (back in the day) and always used Zagg protectors and would say this rivals it for 10% of the price. Definitely worth a try for those feeling adventurous with the wet install. I hate the crappy dry installs..
Now I am just waiting for people on here to recommend a Tempered glass that isn't garbage..
Click to expand...
Click to collapse
Still waiting for that tempered glass as well. I bought an hd screen protector from ebay, which left a bubbly mess... so now that Im waiting for the next brand to come in the mail, I've been going with no screen protector, and it's sooooo much better. I'm just going to have to be super careful not to drop. Not sure that I'll ever be able to use a device with a screen protector again after this.
Augman said:
Still waiting for that tempered glass as well. I bought an hd screen protector from ebay, which left a bubbly mess... so now that Im waiting for the next brand to come in the mail, I've been going with no screen protector, and it's sooooo much better. I'm just going to have to be super careful not to drop. Not sure that I'll ever be able to use a device with a screen protector again after this.
Click to expand...
Click to collapse
The 'HD' dry installs are always bubbly messes. I guess that's why they sell them in packs of 6. I will never go back to them regardless if they are a name brand like Xtremeguard.
I really don't like screen protectors in general but use my phone at the gym and don't trust myself. The wet install is a solid protector until a good tempered glass comes out.
germanmafia88 said:
The 'HD' dry installs are always bubbly messes. I guess that's why they sell them in packs of 6. I will never go back to them regardless if they are a name brand like Xtremeguard.
I really don't like screen protectors in general but use my phone at the gym and don't trust myself. The wet install is a solid protector until a good tempered glass comes out.
Click to expand...
Click to collapse
Hm, I've had some fair luck with the dry install ones. As long as you do it properly, most brands are pretty good. my favorites are tech armor and amfilm, personally, although amfilm doesnt have a screen protector for the turbo, seemingly.
avilancaster said:
Hm, I've had some fair luck with the dry install ones. As long as you do it properly, most brands are pretty good. my favorites are tech armor and amfilm, personally, although amfilm doesnt have a screen protector for the turbo, seemingly.
Click to expand...
Click to collapse
I got a dry install, and it worked KINDA okay, but not sure that I really like it. I might get used to it
Glossy VS Matt screen protector Ipad?
I noticed there are two types. For the ipad which is better ( i generally use it at home, sometimes take it outside). Whats the difference and which ones better?
phojyt said:
I noticed there are two types. For the ipad which is better ( i generally use it at home, sometimes take it outside). Whats the difference and which ones better?
Click to expand...
Click to collapse
If you take it outside, the anti-glare screen protectors will help with sun rays and glare on your screen, but you DO lose some quality of the image. HD will just be a clear piece of plastic that protects the screen, but fingerprints and glare are a bit more of an issue.
Decided I shouldn't go without a screen protector, looks like the tempered glass ones won't work well because the screen in curved on the edges. Anyone have experience with or can recommend a good one? I often see suggestions on here that I couldn't find on my own and I'm thinking one of you guys can help.
By the way i went with this case:
https://www.amazon.com/gp/product/B01M15T2I3/ref=oh_aui_detailpage_o02_s01?ie=UTF8&th=1
I like it except that the camera and volume buttons aren't cut outs. It fits the phone well.
I appreciate any suggestions.
Same boat as you. The ones offered Amazon all seem to complain about them being too thin, bezel to bezel.
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
Would you mind posting some pictures of your screen protector? I'd love to see it.
hikihibiki said:
Would you mind posting some pictures of your screen protector? I'd love to see it.
Click to expand...
Click to collapse
Not a very good pic. Just used an old phone I had laying around buy hopefully it gives you some idea of how it sits.
http://www.dumpt.com/img/viewer.php?file=mcavzh8s6o1d51d9c95j.jpg
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
olegfusion said:
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
Click to expand...
Click to collapse
Nillkin has crappy cases for F5321 that offer little more than scratch protection, and you're incessant advertising for them across the all the device boards is obvious, so you can hardly be considered objective. Please go troll your mother and go away. There are people here looking for serious solutions.
Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
I decided to go with the Skinomi as well, put it on my XC yesterday. Very happy with the results, it's been a while since I have used a non-tempered glass screen protector and for some reason I was expecting the touch screen to be hard to use and the experience generally unpleasant. This wasn't the case and it fits perfectly. recommended.
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
tlxxxsracer said:
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
Click to expand...
Click to collapse
I saw those but have seen to many negative things about G Color protectors to ever try one out myself. Lots of videos on youtube about them being crap.
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
enjoimadcow said:
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
Click to expand...
Click to collapse
Lol, I am positive I saw your review on Amazon when I left mine (we also have the same case). Anyhow, although I disagree with the installation, I agree with everything else. Installation for me was slightly confusing, but really easy once I understood what to do. Air bubbles were a pain to get out, but that's to be expected. As for the quality, it's perfectly fine except for your two points. Mostly your second point: the pixel cutoff. While definitely bearable and not very noticeable most of the time, in certain apps it really is irritatingly noticeable. I would have to recommend against getting this screen protector and waiting until a better one comes out. I'm keeping it on until I find a really good case and/or a better glass screen protector.
Has anyone tried the Nillkin "Amazing H tempered glass screen protector"? Would really like to know if it's any good because I enjoy their frosted case.
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
BTW, their case for this phone is really thick. Not as stylish as their early, asymmetrical cases :/
asmad said:
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
Click to expand...
Click to collapse
This is not great, but is the best I've found so far. It's not got perfect adhesion on the edges, but I've tried the super soft screen protector, flat glass and curved glass with glue only on the edges so dirt gets under it. I'd love to find a curved glass one that has glue all over it instead of just a tiny but around the edges.
I'm also looking for a curved screen protector that "glues" properly (direct contact) to the entire screen, not just the edges.
It doesn't have to be tempered glass either, simple cheap TPU would work fine.
The ebay one mentioned above doesn't ship outside of UK, so it's no good for me.
jayarmstrong said:
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
Click to expand...
Click to collapse
I have a problem with that screen protector, it turns proximity sensor always on, so you can't access the phone in call.
When I removed the devilcase curved glass screen protector, the proximity sensor starts to work again.
Seems that roxfit screen protector has similar issue.
https://talk.sonymobile.com/t5/Xper...-on-gt-black-screen-during-phone/td-p/1203936
Otao sent me their new screen protector for the Note 8, and I have to say, this is probably as good as it gets for normal stick on tempered glass protectors on this phone.
The box is pretty standard and comes with all the screen protector installation essentials.
The key to a good installation on any screen protector is making sure that your phone is clean and that you line up the protector perfectly. This is where the installation tray shines... I have installed protectors in the past on phones (feel free to look at old posts) and I can honestly say that this installation tray is the best one I have used... Initially I was worried because when I went to put the glass into it, it was tight. I thought maybe the sizes were off, but no, it was exactly the right size to make sure that there was very little to no wiggle room in there for the protector. This is good obviously because it only lets you put it in one spot, the right one.
Once you have it lined up, you just drop on the glass and make sure the edges are all the way down. (I just used the included microfiber cloth and went over them a few times.) Next you pop off the guide tray and you're done.
If you are using this screen protector without a case you will notice the increase in thickness, but it's not terrible. With a case however it fixes one of my biggest pet peeves.
You have to be careful when putting cases on when you have this screen protector installed because the bezels are so small on the phone that in order for it to actually protect the whole screen it goes pretty much all the way to the end. BUT this is awesome because the cases that I tried (ringke and rhinoshield) didn't knock off or move the screen protector, they came right up to the edge of it and sat almost flush. (I like this because I HATE when pocket lint gets caught between the protector and the case as I am sure many of you do.)
One thing I noticed is that while this protector does have the black bars all the way around it, it looks like they shrunk on the sides a little bit when compared to the Otao protector from the s8+. This makes it sort of a middle ground between the ones that have the clear sides but you can see the glue and the protectors that have black all the way around but cut off some of the screen. It's not perfect but I like how you don't lose much, if any of the screen real estate and you can only see a little bit of the adhesive.
Overall I would say that this screen protector (so far) is pretty legit. I haven't noticed any loss in sensitivity, no rainbowing, no clicking and no covering over any sensors. The dot matrix is visible under certain lighting conditions but that is to be expected.
I only just installed this protector and will update this post if anything goes wrong or changes, but if this is like my S8+ version, i'm sure I won't have any issues.
If you have any questions or anything let me know and i'll try to respond and get them answered.
Gurule92 said:
Otao sent me their new screen protector for the Note 8, and I have to say, this is probably as good as it gets for normal stick on tempered glass protectors on this phone.
The box is pretty standard and comes with all the screen protector installation essentials.
The key to a good installation on any screen protector is making sure that your phone is clean and that you line up the protector perfectly. This is where the installation tray shines... I have installed protectors in the past on phones (feel free to look at old posts) and I can honestly say that this installation tray is the best one I have used... Initially I was worried because when I went to put the glass into it, it was tight. I thought maybe the sizes were off, but no, it was exactly the right size to make sure that there was very little to no wiggle room in there for the protector. This is good obviously because it only lets you put it in one spot, the right one.
Once you have it lined up, you just drop on the glass and make sure the edges are all the way down. (I just used the included microfiber cloth and went over them a few times.) Next you pop off the guide tray and you're done.
If you are using this screen protector without a case you will notice the increase in thickness, but it's not terrible. With a case however it fixes one of my biggest pet peeves.
You have to be careful when putting cases on when you have this screen protector installed because the bezels are so small on the phone that in order for it to actually protect the whole screen it goes pretty much all the way to the end. BUT this is awesome because the cases that I tried (ringke and rhinoshield) didn't knock off or move the screen protector, they came right up to the edge of it and sat almost flush. (I like this because I HATE when pocket lint gets caught between the protector and the case as I am sure many of you do.)
One thing I noticed is that while this protector does have the black bars all the way around it, it looks like they shrunk on the sides a little bit when compared to the Otao protector from the s8+. This makes it sort of a middle ground between the ones that have the clear sides but you can see the glue and the protectors that have black all the way around but cut off some of the screen. It's not perfect but I like how you don't lose much, if any of the screen real estate and you can only see a little bit of the adhesive.
Overall I would say that this screen protector (so far) is pretty legit. I haven't noticed any loss in sensitivity, no rainbowing, no clicking and no covering over any sensors. The dot matrix is visible under certain lighting conditions but that is to be expected.
I only just installed this protector and will update this post if anything goes wrong or changes, but if this is like my S8+ version, i'm sure I won't have any issues.
If you have any questions or anything let me know and i'll try to respond and get them answered.
Click to expand...
Click to collapse
Product link
[Installation Tray] Galaxy Note 8 Screen Protector, OTAO 3D Tempered Glass Screen protector [case friendly] 9H Hardness Tough Sensitivity Samsung screen protector Note 8
https://www.amazon.com/dp/B075XKZX3Y/ref=cm_sw_r_cp_apa_nEZbAbFG3Z0DK
Sent from my SM-N950U1 using Tapatalk
badrsj said:
Product...
Click to expand...
Click to collapse
But you really don't need to quote the whole OP post again...
Sent from my Galaxy Note8 using XDA Labs
Hadn't realized that
Sent from my SM-N950U1 using Tapatalk
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
I made the Whitestone Dome work with the UAG PLASMA AND PLYO. With a Dremel and sanding the corners. The PLASMA is my flavored case for looks and protection.
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
I don't have any UAG cases but it can't be bigger in the front then rhinoshield can it? I would guess itd work but can't say for sure
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
If it's the corners you're worried about they come in pretty good. Check out the pic
So is it a full adhesive protector?
Sokudoningyou said:
So is it a full adhesive protector?
Click to expand...
Click to collapse
I don't think it is. I see micro dots in one of the pictures.
Sokudoningyou said:
So is it a full adhesive protector?
Click to expand...
Click to collapse
Nope sadly its not. But its still not bad for what it is
What Sh!ts me off the most is that here in Oz NOTHING can be delivered...
If I want it delivered I have to use a redirect service thaty will add anywhere from $5 to $20 to send it....:crying:
ultramag69 said:
What Sh!ts me off the most is that here in Oz NOTHING can be delivered...
If I want it delivered I have to use a redirect service thaty will add anywhere from $5 to $20 to send it....:crying:
Click to expand...
Click to collapse
That's unfortunate. 5 bucks isn't too bad. But 20. Nahh
says out of stock, how much was it?
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
This one fits, the one from the OP 100% no, the corner rounding isn't flat enough. If you compare both on the pictures you'll see.
https://www.amazon.de/dp/B075YPSQSY/..._9w3aAb97J1R50
On Amazon.com it is available too.
https://www.amazon.com/gp/aw/d/B075Y...k+note+8&psc=1
pappschlumpf said:
This one fits, the one from the OP 100% no, the corner rounding isn't flat enough. If you compare both on the pictures you'll see.
https://www.amazon.de/dp/B075YPSQSY/..._9w3aAb97J1R50
On Amazon.com it is available too.
https://www.amazon.com/gp/aw/d/B075Y...k+note+8&psc=1
Click to expand...
Click to collapse
Is this full adhesive, or just the edges?
deebo007 said:
Is this full adhesive, or just the edges?
Click to expand...
Click to collapse
Edge only. Forget about full adhesive, except whitestone. I've ordered two classic full adhesive @ AliExpress. A joke Bubbles, not adhering properly on the right and left side. And well the UAG wouldn't have fit with both too. Opened a dispute for both and got my money back.
Gesendet von meinem SM-N950F mit Tapatalk
Hi folk,
With another OnePlus product comes another OnePlus attempt at making a tempered glass screen protector which works for it. Will it be this time that is the magic attempt?
If you dont want to or can't watch the video here are my thoughts:
Yes, they seem to have finally made a tempered glass which fits perfectly on the screen without much cut off. I say much as I think there is still a tiny cut off, but it's nowhere near as noticeable as it was on the 3/3t or 5. If you want to take a look, its on the video at around the 4:04 mark.
The quality is excellent, you can barely feel or see that it's there. There are no sharp edges as the screen tapers off at the edge. It's a full glue screen protector so there is no dot matrix or rainbox effects. You do however have to be fairly careful whilst applying it and taking it off its bed as it feels like it could snap fairly easy if you rush it.
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Let me know if you have any questions.
Jono
Thanks for that, good to know as I ordered one with my 5T.
Hopefully there is a decent bunch of 3rd party ones too.
A spigen tempered glass is my all time favorite screen guard.
niijonodhg said:
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Click to expand...
Click to collapse
Thanks for this. I wanted to know how much it will cut of the screen but its much lesser than earlier.
But i need to disagree something with you. You (and many others) said it was issue etc. on OP3/3T/5 what last TGSP cutted off screen. Well it wasnt really issue or fault on Oneplus side. They needed to choose to have adhesives only on sides and no cut-off or adhesives on fully but had to cut-off. That was because of OP3/3T/5 front glass design where glass started ro bend (2.5D) earlier than usual. Thats why black borders was bigger as otherwise you would get ugly halo's and nobody likes that.
About price. Dont know where you leave but here in Finland 20€ price is nearly cheapest TGSP avaible here. Usually TGSP's here costs around 25-50€ depending of phone model so 20€ is more than just normal price for us. So okay maybe its little pricey compared ro your country but on many others it isnt.
This is my first OP device so I know nothing about past issues, but this is by far the best fitting, best sealing TGSP I have ever installed. Typically with screen protectors the edges do not want to seal/stick but the squeegee made quick work of getting all the bubbles out. There are a few pieces of inevitable lint but not one single bubble.
It does cut a tiny bit of the screen off which gives a weird depth to the screens appearance so for that I give it 9/10. If it was totally clear or just had the black at the top and bottom it would be 10/10 for sure.
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I'm using the original one and is perfect with the original case/Bumper.
Mine is not so perfect and the screen is slightly cover on the edge. is not a huge problem, but is noticeble if you see the phone from a side.
in any case is far better than the original plastic protector and perfect with a case.
DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
niijonodhg said:
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
Click to expand...
Click to collapse
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
DeathStroke said:
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Which case do you have?
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
Honestly, I haven't noticed.
niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
The one that came in the box. I want to order a 3d tempered glass and a premium case so that they can work together. Looking yet for a compatible combo.
Sent from my ONEPLUS A5010 using Tapatalk
niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
I just removed the protector to see how the screen looks naked. The "grainy-ness" is gone. I also noticed a potential problem with the protector. The adhesive doesn't go all the way to the top or bottom of the protector, so when I removed it I found a lot of dust stuck to the top and bottom bezel of the phone. This could cause scratches. Even though the scratches would not be on the display, I don't want scratches anywhere on the glass. If I keep this phone I'll try an IQshield.
With the bubbles settling behind, a lot of little dust has been captured.
I also notice grainy-ness. I'm likely going to ditch it and just go naked...
I just got my for 10€. And yes, it still crops a bit from both sides but not like OP3/3T/5. And yes, there is grainy-ness as stated above. You cant notice on black background but on white yes.
I bought the '5T full scratch protection' bundle with my phone. I have an unopened "3D Tempered Glass Screen Protector" and an opened (but unused) "Sandstone Protective Case". My plan was going to be to use the case until Spigen comes out with a 5T case, but I just decided to rock the case that came with my 5T instead.
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
To be frank I wouldn't have noticed the grainy screen till I read your comment. But now that I've read it.... The screen protector does induce the grainy effect. It's a perfect fit imho, though it definitely does give out that grainy effect. I'm guessing I'll stop noticing it in a couple of days time.
I had an extra IQshield (wet apply) protector for a Pixel 2 XL. I cut a little off the top and it fit fine. I must say, the IQshield is very clear, no grainy screen for me.
I have to put my 2 cents in on this. The official tempered glass is pretty great. I had no issue installing, it stayed in place, zero bubble at all, and feels great. using it with the official sandstone case.