Hi folk,
With another OnePlus product comes another OnePlus attempt at making a tempered glass screen protector which works for it. Will it be this time that is the magic attempt?
If you dont want to or can't watch the video here are my thoughts:
Yes, they seem to have finally made a tempered glass which fits perfectly on the screen without much cut off. I say much as I think there is still a tiny cut off, but it's nowhere near as noticeable as it was on the 3/3t or 5. If you want to take a look, its on the video at around the 4:04 mark.
The quality is excellent, you can barely feel or see that it's there. There are no sharp edges as the screen tapers off at the edge. It's a full glue screen protector so there is no dot matrix or rainbox effects. You do however have to be fairly careful whilst applying it and taking it off its bed as it feels like it could snap fairly easy if you rush it.
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Let me know if you have any questions.
Jono
Thanks for that, good to know as I ordered one with my 5T.
Hopefully there is a decent bunch of 3rd party ones too.
A spigen tempered glass is my all time favorite screen guard.
niijonodhg said:
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Click to expand...
Click to collapse
Thanks for this. I wanted to know how much it will cut of the screen but its much lesser than earlier.
But i need to disagree something with you. You (and many others) said it was issue etc. on OP3/3T/5 what last TGSP cutted off screen. Well it wasnt really issue or fault on Oneplus side. They needed to choose to have adhesives only on sides and no cut-off or adhesives on fully but had to cut-off. That was because of OP3/3T/5 front glass design where glass started ro bend (2.5D) earlier than usual. Thats why black borders was bigger as otherwise you would get ugly halo's and nobody likes that.
About price. Dont know where you leave but here in Finland 20€ price is nearly cheapest TGSP avaible here. Usually TGSP's here costs around 25-50€ depending of phone model so 20€ is more than just normal price for us. So okay maybe its little pricey compared ro your country but on many others it isnt.
This is my first OP device so I know nothing about past issues, but this is by far the best fitting, best sealing TGSP I have ever installed. Typically with screen protectors the edges do not want to seal/stick but the squeegee made quick work of getting all the bubbles out. There are a few pieces of inevitable lint but not one single bubble.
It does cut a tiny bit of the screen off which gives a weird depth to the screens appearance so for that I give it 9/10. If it was totally clear or just had the black at the top and bottom it would be 10/10 for sure.
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I'm using the original one and is perfect with the original case/Bumper.
Mine is not so perfect and the screen is slightly cover on the edge. is not a huge problem, but is noticeble if you see the phone from a side.
in any case is far better than the original plastic protector and perfect with a case.
DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
niijonodhg said:
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
Click to expand...
Click to collapse
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
DeathStroke said:
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Which case do you have?
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
Honestly, I haven't noticed.
niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
The one that came in the box. I want to order a 3d tempered glass and a premium case so that they can work together. Looking yet for a compatible combo.
Sent from my ONEPLUS A5010 using Tapatalk
niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
I just removed the protector to see how the screen looks naked. The "grainy-ness" is gone. I also noticed a potential problem with the protector. The adhesive doesn't go all the way to the top or bottom of the protector, so when I removed it I found a lot of dust stuck to the top and bottom bezel of the phone. This could cause scratches. Even though the scratches would not be on the display, I don't want scratches anywhere on the glass. If I keep this phone I'll try an IQshield.
With the bubbles settling behind, a lot of little dust has been captured.
I also notice grainy-ness. I'm likely going to ditch it and just go naked...
I just got my for 10€. And yes, it still crops a bit from both sides but not like OP3/3T/5. And yes, there is grainy-ness as stated above. You cant notice on black background but on white yes.
I bought the '5T full scratch protection' bundle with my phone. I have an unopened "3D Tempered Glass Screen Protector" and an opened (but unused) "Sandstone Protective Case". My plan was going to be to use the case until Spigen comes out with a 5T case, but I just decided to rock the case that came with my 5T instead.
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
To be frank I wouldn't have noticed the grainy screen till I read your comment. But now that I've read it.... The screen protector does induce the grainy effect. It's a perfect fit imho, though it definitely does give out that grainy effect. I'm guessing I'll stop noticing it in a couple of days time.
I had an extra IQshield (wet apply) protector for a Pixel 2 XL. I cut a little off the top and it fit fine. I must say, the IQshield is very clear, no grainy screen for me.
I have to put my 2 cents in on this. The official tempered glass is pretty great. I had no issue installing, it stayed in place, zero bubble at all, and feels great. using it with the official sandstone case.
Related
Hi there!
I need simple plastic film, clear screen protector, similar to what is installed on new OnePlus 3 out of the box, but this one don't cover edges of the LED, leaving about 2mm exposed from both sides.
Kindly someone give me names or links of full screen protector which is not hard glass, but soft regular screen protector which cover complete screen
Or any other Phones screen protect which can cover OnePlus 3, may be of galaxy S7 Edge
Why i need simple screen protector:
- Its thinner
- Its not noticeable, you don't feel if its there
- Prevents scratches
- Don't make device thicker, by putting extra thick layer
- Can access home button/finger print reader easily, without digging your thumb in
Why i hate Glass Screen protectors
- Thicker, makes phone fatter
- Untidy, makes phone bulky
- buries home button further inside
- At times, i have seen they can damage the screen as well
I am using the IQ Shield and I love it. Fits great and was pretty easy to apply.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
I have the iq shield and one thing I didn't like about it is that there is visible orange peeling at certain angles.
chaztro1892 said:
I am using the IQ Shield and I love it. Fits great and was pretty easy to apply.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for replying, but i feel installing that wet thing is little scary, to wet your phone and everything?
dwang said:
I have the iq shield and one thing I didn't like about it is that there is visible orange peeling at certain angles.
Click to expand...
Click to collapse
protector that comes preinstalled on OnePlus 3 seem to be of a very nice quality to me, issue is that, its short, i feel they could extend it little more to sides, just before it curves down, they made it short intentionally to make people buy there full screen or other temper glass screen protectors.
May be i should try to take screen protector of some other phone, like that of Samsung and try to cut it as per OP3.
May be i can extend it to black bars where the screen ends.
I decided to try the Orzly tempered glass. Normally I'm a huge fan of the Spigen Crystal and Ultra Crystal plastic ones - still almost no noticeable marking on the Crystal I have on my LG G4, and the Ultra Crystal on my wife's Nexus 5 literally saved us a screen replacement last winter. I thought the screen HAD broken, down to ordering a replacement to put in it ... but when I peeled the Spigen off, the screen was fine. They don't have one for the OP3 yet though. So this time I thought I'd try something different with the tempered glass. If I don't like it, I'll have to keep looking.
Interested in seeing if there are any good plastic screen protector recommendations though, in case I find that I'm not a fan of the glass ones.
Best non-glass screen protector.
BestSkinsEver Thank me later (or don't b*tch at me when you F up the wet install, ZAGG style)
I actually really like the original film protector. I still have mine on and I got the phone as soon as t was available and it still looks great.
Anyone know where I can get another? They don't seem to have them at the oneplus store.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Get this blindly-
http://www.amazon.in/Orzly%C2%AE-Protector-OnePlus-Multi-Pack-SmartPhone/dp/B01H7BTSM0?ie=UTF8&redirect=true&ref_=ya_st_dp_summary
You can thank me later
Palauv said:
Get this blindly-
http://www.amazon.in/Orzly%C2%AE-Protector-OnePlus-Multi-Pack-SmartPhone/dp/B01H7BTSM0?ie=UTF8&redirect=true&ref_=ya_st_dp_summary
You can thank me later
Click to expand...
Click to collapse
Why later, have it now!
bryanus said:
I actually really like the original film protector. I still have mine on and I got the phone as soon as t was available and it still looks great.
Anyone know where I can get another? They don't seem to have them at the oneplus store.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Its of good quality, they could cover sides bit more, as curve starts from where black line starts, i guess the made it short for people to buy their accessories and remove it, probably.
GeneralDisaray2 said:
Best non-glass screen protector.
BestSkinsEver Thank me later (or don't b*tch at me when you F up the wet install, ZAGG style)
Click to expand...
Click to collapse
Thanks bro.
Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr
Well I started the Orzly plastic film trend on Xda. Its the first thing I wanted to do after 4 failed tempered glass abd its still the best. Got mine at 499 of 5 pieces. The first one is still in use and I love it.
Sent from my ONEPLUS A3003 using Tapatalk
sangalaxyi9003 said:
Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr
Click to expand...
Click to collapse
Let me know the quality please. I buyed the first one some days ago and I'm waiting fot the delivery.
sangalaxyi9003 said:
Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr
Click to expand...
Click to collapse
They look tempting, but i am not sure how they will even cover the curves, i heard they come off from edges, it would have been better if they had left the curves exposed, just cover the complete LED, just up to the point where LED starts.
Hopefully it will give surprising results.
khandelwalgaurav said:
Well I started the Orzly plastic film trend on Xda. Its the first thing I wanted to do after 4 failed tempered glass abd its still the best. Got mine at 499 of 5 pieces. The first one is still in use and I love it.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Do you have to wet it, to apply?
Decided I shouldn't go without a screen protector, looks like the tempered glass ones won't work well because the screen in curved on the edges. Anyone have experience with or can recommend a good one? I often see suggestions on here that I couldn't find on my own and I'm thinking one of you guys can help.
By the way i went with this case:
https://www.amazon.com/gp/product/B01M15T2I3/ref=oh_aui_detailpage_o02_s01?ie=UTF8&th=1
I like it except that the camera and volume buttons aren't cut outs. It fits the phone well.
I appreciate any suggestions.
Same boat as you. The ones offered Amazon all seem to complain about them being too thin, bezel to bezel.
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
Would you mind posting some pictures of your screen protector? I'd love to see it.
hikihibiki said:
Would you mind posting some pictures of your screen protector? I'd love to see it.
Click to expand...
Click to collapse
Not a very good pic. Just used an old phone I had laying around buy hopefully it gives you some idea of how it sits.
http://www.dumpt.com/img/viewer.php?file=mcavzh8s6o1d51d9c95j.jpg
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
olegfusion said:
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
Click to expand...
Click to collapse
Nillkin has crappy cases for F5321 that offer little more than scratch protection, and you're incessant advertising for them across the all the device boards is obvious, so you can hardly be considered objective. Please go troll your mother and go away. There are people here looking for serious solutions.
Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
I decided to go with the Skinomi as well, put it on my XC yesterday. Very happy with the results, it's been a while since I have used a non-tempered glass screen protector and for some reason I was expecting the touch screen to be hard to use and the experience generally unpleasant. This wasn't the case and it fits perfectly. recommended.
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
tlxxxsracer said:
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
Click to expand...
Click to collapse
I saw those but have seen to many negative things about G Color protectors to ever try one out myself. Lots of videos on youtube about them being crap.
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
enjoimadcow said:
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
Click to expand...
Click to collapse
Lol, I am positive I saw your review on Amazon when I left mine (we also have the same case). Anyhow, although I disagree with the installation, I agree with everything else. Installation for me was slightly confusing, but really easy once I understood what to do. Air bubbles were a pain to get out, but that's to be expected. As for the quality, it's perfectly fine except for your two points. Mostly your second point: the pixel cutoff. While definitely bearable and not very noticeable most of the time, in certain apps it really is irritatingly noticeable. I would have to recommend against getting this screen protector and waiting until a better one comes out. I'm keeping it on until I find a really good case and/or a better glass screen protector.
Has anyone tried the Nillkin "Amazing H tempered glass screen protector"? Would really like to know if it's any good because I enjoy their frosted case.
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
BTW, their case for this phone is really thick. Not as stylish as their early, asymmetrical cases :/
asmad said:
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
Click to expand...
Click to collapse
This is not great, but is the best I've found so far. It's not got perfect adhesion on the edges, but I've tried the super soft screen protector, flat glass and curved glass with glue only on the edges so dirt gets under it. I'd love to find a curved glass one that has glue all over it instead of just a tiny but around the edges.
I'm also looking for a curved screen protector that "glues" properly (direct contact) to the entire screen, not just the edges.
It doesn't have to be tempered glass either, simple cheap TPU would work fine.
The ebay one mentioned above doesn't ship outside of UK, so it's no good for me.
jayarmstrong said:
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
Click to expand...
Click to collapse
I have a problem with that screen protector, it turns proximity sensor always on, so you can't access the phone in call.
When I removed the devilcase curved glass screen protector, the proximity sensor starts to work again.
Seems that roxfit screen protector has similar issue.
https://talk.sonymobile.com/t5/Xper...-on-gt-black-screen-during-phone/td-p/1203936
I just received an IQ Shield Matte screen protector and I'm really disappointed. It screws up the colors and whites have a rainbow effect to them. I took it off and now I'm looking for a new one. I'd like one that is:
1. Anti-glare
2. Anti-fingerprint
3. Clear and doesn't screw with this beautiful display.
Any recommendations?
Thanks in advance!
Thee one and only,,,,but more importantly expensive whitestone dome screen protector is probably the most I've heard of working...45 to 50 dollars tho
Any you can recommend about $20 and under?
First I tried the Spigen NeoFlex film screen protectors and they are garbage. Then I ordered a cheapo full cover tempered glass screen protector from eBay and it works great.
http://www.ebay.com/itm/3D-Full-Cov...ector-For-Samsung-Galaxy-Note-8-/332345555824
I've only been using it for about a week so I can't say how well it will keep dust out. Sensitivity is great, I don't notice it's on at all. It's not Anti-glare or Anti-fingerprint but it's only $8.
I'm using the i-blason tempered glass.
Under $20, it's still on, doesn't interfere with the screen.
It's still going to collect fingerprints and smudges due to the oils in our skin, but it wipes off easily.
jellyhead said:
First I tried the Spigen NeoFlex film screen protectors and they are garbage. Then I ordered a cheapo full cover tempered glass screen protector from eBay and it works great.
http://www.ebay.com/itm/3D-Full-Cov...ector-For-Samsung-Galaxy-Note-8-/332345555824
I've only been using it for about a week so I can't say how well it will keep dust out. Sensitivity is great, I don't notice it's on at all. It's not Anti-glare or Anti-fingerprint but it's only $8.
Click to expand...
Click to collapse
thats becuz the neoflex is a rubber 3m film, not plasti-glass. i honestly like Spigen Neoflex screen protector. only downfall is using the pen on it leaves lines where youve drawn .. but cant be felt by your touch
Sent from my SM-N950U using XDA-Developers Legacy app
mlock420 said:
Thee one and only,,,,but more importantly expensive whitestone dome screen protector is probably the most I've heard of working...45 to 50 dollars tho
Click to expand...
Click to collapse
I've never seen this warning before on anything from Amazon.
roaduardo said:
I've never seen this warning before on anything from Amazon.
Click to expand...
Click to collapse
Somebody got a knock off, I read. The screen protector he got was plastic instead of glass.
Sent from my SM-N950U using XDA-Developers Legacy app
roaduardo said:
I've never seen this warning before on anything from Amazon.
Click to expand...
Click to collapse
Oh wow that sucks but for some reason YouTubers recommend this for s8 and note 8 idk man it looks promising but yeah that warning I've never seen before
There are plenty of discussions under the accessories section
But I'd say don't bother. I had one tempered glass protector on for an hour before it annoyed me too much and I removed it! Destroys the feel and use of the phone.
I have been buying the RhinoShield stuff for my stuff and its held up really well for me.
rhinoshield.io is where you'll find it.. (I havn't logged in long enough that I forgot my account info :/ )
edit: found my login info so now I can add the link:
https://rhinoshield.io/collections/samsung-galaxy-note-8
Plus, nobody else's stuff has any evidence that even suggests it actually works.
I havn't tried it for the note8 but I came by this thread while I was researching if anyone had so figure I'd mention it. It is expensive to get the whole kit (screen protector, bumper, and in this case rear glass protector), but I found it worth it..
I have a cheapo '2.5D' glass and its doing well. Touch response is worse mind.
There is a speaker hole at the top; this needs covering with a bit of tape or you wil get dust between the screen and the protector.
bonerp said:
There are plenty of discussions under the accessories section
But I'd say don't bother. I had one tempered glass protector on for an hour before it annoyed me too much and I removed it! Destroys the feel and use of the phone.
Click to expand...
Click to collapse
I purchased a relatively inexpensive TG protector. While it exhibits many of the drawbacks of TG protectors that aren't full-adhesive (i.e. all of them except the Whitestone Dome), it doesn't have quite the "rainbow effect" that I've seen with other protectors.
Its real downside, though, is its slickness ... I need a more paper-like surface to better control the s-pen. Just the tiniest bit of friction would help. I'm thinking that I may have to go to a film protector rather than TG to get that, though. Does anyone else have this issue with TG protectors?
eglesiaw said:
I just received an IQ Shield Matte screen protector and I'm really disappointed. It screws up the colors and whites have a rainbow effect to them. I took it off and now I'm looking for a new one. I'd like one that is:
1. Anti-glare
2. Anti-fingerprint
3. Clear and doesn't screw with this beautiful display.
Any recommendations?
Thanks in advance!
Click to expand...
Click to collapse
Ever since the introduction of the edge curved screen (and I have owned the lot) I have never found a decent screen saver. It is a subject on every forum here on XDA and concerning all the Samsung edge models.
I have taken recommendations only to find them useless. Some use a glue, some have a dotted appearance after application some just suck period!
I used a partial screen saver once that just covered the centre of the screen but even that proved awful. Even used Samsungs own on the Note 7 and though that was not glass it also was horrible.
If any peer here does find a working screen protector PLEASE let us know.
Ryland
Whitestone is the best.
I like the Spigen NeoFlex, it's been great so far for me. Went on easily, hasn't peeled off the corners/edge (and I use the Spigen Tough Armor case) and after the 12 hours to settle on the screen it looks great and writing on it with the s-pen feels good too. My personal opinion and the only one I've tried so far on my Note 8
faded03cobra said:
Whitestone is the best.
Click to expand...
Click to collapse
Can the Whiitestone be removed once it's been glued to the Screen?
yes
I got the Bodyguardz glass protector sold to me at the AT&T store (lazy me). The guy installed it and it's ok. Glass protectors have an innate problem in that they sometimes don't transmit touches to the touchscreen itself. This one is no different but it does fit well. And it has a lifetime free replacement policy. I'll keep it to protect my screen.
Otao sent me their new screen protector for the Note 8, and I have to say, this is probably as good as it gets for normal stick on tempered glass protectors on this phone.
The box is pretty standard and comes with all the screen protector installation essentials.
The key to a good installation on any screen protector is making sure that your phone is clean and that you line up the protector perfectly. This is where the installation tray shines... I have installed protectors in the past on phones (feel free to look at old posts) and I can honestly say that this installation tray is the best one I have used... Initially I was worried because when I went to put the glass into it, it was tight. I thought maybe the sizes were off, but no, it was exactly the right size to make sure that there was very little to no wiggle room in there for the protector. This is good obviously because it only lets you put it in one spot, the right one.
Once you have it lined up, you just drop on the glass and make sure the edges are all the way down. (I just used the included microfiber cloth and went over them a few times.) Next you pop off the guide tray and you're done.
If you are using this screen protector without a case you will notice the increase in thickness, but it's not terrible. With a case however it fixes one of my biggest pet peeves.
You have to be careful when putting cases on when you have this screen protector installed because the bezels are so small on the phone that in order for it to actually protect the whole screen it goes pretty much all the way to the end. BUT this is awesome because the cases that I tried (ringke and rhinoshield) didn't knock off or move the screen protector, they came right up to the edge of it and sat almost flush. (I like this because I HATE when pocket lint gets caught between the protector and the case as I am sure many of you do.)
One thing I noticed is that while this protector does have the black bars all the way around it, it looks like they shrunk on the sides a little bit when compared to the Otao protector from the s8+. This makes it sort of a middle ground between the ones that have the clear sides but you can see the glue and the protectors that have black all the way around but cut off some of the screen. It's not perfect but I like how you don't lose much, if any of the screen real estate and you can only see a little bit of the adhesive.
Overall I would say that this screen protector (so far) is pretty legit. I haven't noticed any loss in sensitivity, no rainbowing, no clicking and no covering over any sensors. The dot matrix is visible under certain lighting conditions but that is to be expected.
I only just installed this protector and will update this post if anything goes wrong or changes, but if this is like my S8+ version, i'm sure I won't have any issues.
If you have any questions or anything let me know and i'll try to respond and get them answered.
Gurule92 said:
Otao sent me their new screen protector for the Note 8, and I have to say, this is probably as good as it gets for normal stick on tempered glass protectors on this phone.
The box is pretty standard and comes with all the screen protector installation essentials.
The key to a good installation on any screen protector is making sure that your phone is clean and that you line up the protector perfectly. This is where the installation tray shines... I have installed protectors in the past on phones (feel free to look at old posts) and I can honestly say that this installation tray is the best one I have used... Initially I was worried because when I went to put the glass into it, it was tight. I thought maybe the sizes were off, but no, it was exactly the right size to make sure that there was very little to no wiggle room in there for the protector. This is good obviously because it only lets you put it in one spot, the right one.
Once you have it lined up, you just drop on the glass and make sure the edges are all the way down. (I just used the included microfiber cloth and went over them a few times.) Next you pop off the guide tray and you're done.
If you are using this screen protector without a case you will notice the increase in thickness, but it's not terrible. With a case however it fixes one of my biggest pet peeves.
You have to be careful when putting cases on when you have this screen protector installed because the bezels are so small on the phone that in order for it to actually protect the whole screen it goes pretty much all the way to the end. BUT this is awesome because the cases that I tried (ringke and rhinoshield) didn't knock off or move the screen protector, they came right up to the edge of it and sat almost flush. (I like this because I HATE when pocket lint gets caught between the protector and the case as I am sure many of you do.)
One thing I noticed is that while this protector does have the black bars all the way around it, it looks like they shrunk on the sides a little bit when compared to the Otao protector from the s8+. This makes it sort of a middle ground between the ones that have the clear sides but you can see the glue and the protectors that have black all the way around but cut off some of the screen. It's not perfect but I like how you don't lose much, if any of the screen real estate and you can only see a little bit of the adhesive.
Overall I would say that this screen protector (so far) is pretty legit. I haven't noticed any loss in sensitivity, no rainbowing, no clicking and no covering over any sensors. The dot matrix is visible under certain lighting conditions but that is to be expected.
I only just installed this protector and will update this post if anything goes wrong or changes, but if this is like my S8+ version, i'm sure I won't have any issues.
If you have any questions or anything let me know and i'll try to respond and get them answered.
Click to expand...
Click to collapse
Product link
[Installation Tray] Galaxy Note 8 Screen Protector, OTAO 3D Tempered Glass Screen protector [case friendly] 9H Hardness Tough Sensitivity Samsung screen protector Note 8
https://www.amazon.com/dp/B075XKZX3Y/ref=cm_sw_r_cp_apa_nEZbAbFG3Z0DK
Sent from my SM-N950U1 using Tapatalk
badrsj said:
Product...
Click to expand...
Click to collapse
But you really don't need to quote the whole OP post again...
Sent from my Galaxy Note8 using XDA Labs
Hadn't realized that
Sent from my SM-N950U1 using Tapatalk
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
I made the Whitestone Dome work with the UAG PLASMA AND PLYO. With a Dremel and sanding the corners. The PLASMA is my flavored case for looks and protection.
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
I don't have any UAG cases but it can't be bigger in the front then rhinoshield can it? I would guess itd work but can't say for sure
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
If it's the corners you're worried about they come in pretty good. Check out the pic
So is it a full adhesive protector?
Sokudoningyou said:
So is it a full adhesive protector?
Click to expand...
Click to collapse
I don't think it is. I see micro dots in one of the pictures.
Sokudoningyou said:
So is it a full adhesive protector?
Click to expand...
Click to collapse
Nope sadly its not. But its still not bad for what it is
What Sh!ts me off the most is that here in Oz NOTHING can be delivered...
If I want it delivered I have to use a redirect service thaty will add anywhere from $5 to $20 to send it....:crying:
ultramag69 said:
What Sh!ts me off the most is that here in Oz NOTHING can be delivered...
If I want it delivered I have to use a redirect service thaty will add anywhere from $5 to $20 to send it....:crying:
Click to expand...
Click to collapse
That's unfortunate. 5 bucks isn't too bad. But 20. Nahh
says out of stock, how much was it?
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
This one fits, the one from the OP 100% no, the corner rounding isn't flat enough. If you compare both on the pictures you'll see.
https://www.amazon.de/dp/B075YPSQSY/..._9w3aAb97J1R50
On Amazon.com it is available too.
https://www.amazon.com/gp/aw/d/B075Y...k+note+8&psc=1
pappschlumpf said:
This one fits, the one from the OP 100% no, the corner rounding isn't flat enough. If you compare both on the pictures you'll see.
https://www.amazon.de/dp/B075YPSQSY/..._9w3aAb97J1R50
On Amazon.com it is available too.
https://www.amazon.com/gp/aw/d/B075Y...k+note+8&psc=1
Click to expand...
Click to collapse
Is this full adhesive, or just the edges?
deebo007 said:
Is this full adhesive, or just the edges?
Click to expand...
Click to collapse
Edge only. Forget about full adhesive, except whitestone. I've ordered two classic full adhesive @ AliExpress. A joke Bubbles, not adhering properly on the right and left side. And well the UAG wouldn't have fit with both too. Opened a dispute for both and got my money back.
Gesendet von meinem SM-N950F mit Tapatalk
I Just bought these and these are the best for the 5T.
Check how to install here -
matrix.bharath said:
I Just bought these and these are the best for the 5T.
Check how to install here -
Click to expand...
Click to collapse
I'm thinking of buying the OP5T On-the-Go bundle (which will cost abt 2k) is it worth that price?
rondias18 said:
I'm thinking of buying the OP5T On-the-Go bundle (which will cost abt 2k) is it worth that price?
Click to expand...
Click to collapse
the case will not give you drop protections. wait and buy spigen or any drop protection case. highly recommend that.. for now just pick the screen guard.
matrix.bharath said:
the case will not give you drop protections. wait and buy spigen or any drop protection case. highly recommend that.. for now just pick the screen guard.
Click to expand...
Click to collapse
OMG! Yes, I've been thinking the same thing. There were a few xda users that said the Spigen cases were overrated. I'll consider getting the screen guard. Need to see it in person.
I bought the Official Glass Protector. Installation went okay but I managed to get a few small dust specs to catch onto the bottom of the glass so have a few bubbles. Other than that it is perfect. Can't even tell a glass protector is on. Touch response remains the same too.
The original OP 5T case is outstanding, it has a very good grip and looks like carbon fiber material and not to forget the 1+ legendary logo on the back.
does it go above the case or is it pretty even with the stock case? meaning is the screen protector thick
Also got the official tempered glass protector.
Touch response and feel is fine, but both sides have been clipped by the black side bars of the protector, not much, but noticeable especially if watching a zoomed video, on the fastboot screen and unlocked bootloader warning screen (ala OP5).
soxfor said:
Also got the official tempered glass protector.
Touch response and feel is fine, but both sides have been clipped by the black side bars of the protector, not much, but noticeable especially if watching a zoomed video, on the fastboot screen and unlocked bootloader warning screen (ala OP5).
Click to expand...
Click to collapse
Cropping is much smaller than what it was with OP3/3T/5.
Yes it's less, just thought mentioning it's still present was relevant.
Sent from my OnePlus 5T using XDA Labs
Whoever wishes to install the glass, do it in your bathroom after having a hot steamy shower. The price of the glass is totally justified iff you are able to install it properly without any single bubble. Otherwise its a waste. I really wouldn't recommend it to anyone who hasn't installed screen protectors by themselves because you are bound to go wrong either with the alignment or the application/cleaning. Go for a good quality plastic screen protector instead or keep your original screen protector that came with the phone
I bought the official big boss bundle.
The glass protector was great and fitted perfect without any bubbles.
I gave the headphone to my friend as I already had a good pair and the case is a bit useless it's not even raised or anything so does jot protect it at all, I went for the carbon fibre one.
Sent from my ONEPLUS A5010 using Tapatalk