Database Develop

Require Simple Screen Protector - No Glass Screen Protector

Hi there!
I need simple plastic film, clear screen protector, similar to what is installed on new OnePlus 3 out of the box, but this one don't cover edges of the LED, leaving about 2mm exposed from both sides.
Kindly someone give me names or links of full screen protector which is not hard glass, but soft regular screen protector which cover complete screen
Or any other Phones screen protect which can cover OnePlus 3, may be of galaxy S7 Edge
Why i need simple screen protector:
- Its thinner
- Its not noticeable, you don't feel if its there
- Prevents scratches
- Don't make device thicker, by putting extra thick layer
- Can access home button/finger print reader easily, without digging your thumb in
Why i hate Glass Screen protectors
- Thicker, makes phone fatter
- Untidy, makes phone bulky
- buries home button further inside
- At times, i have seen they can damage the screen as well

I am using the IQ Shield and I love it. Fits great and was pretty easy to apply.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

I have the iq shield and one thing I didn't like about it is that there is visible orange peeling at certain angles.

chaztro1892 said:
I am using the IQ Shield and I love it. Fits great and was pretty easy to apply.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for replying, but i feel installing that wet thing is little scary, to wet your phone and everything?

dwang said:
I have the iq shield and one thing I didn't like about it is that there is visible orange peeling at certain angles.
Click to expand...
Click to collapse
protector that comes preinstalled on OnePlus 3 seem to be of a very nice quality to me, issue is that, its short, i feel they could extend it little more to sides, just before it curves down, they made it short intentionally to make people buy there full screen or other temper glass screen protectors.
May be i should try to take screen protector of some other phone, like that of Samsung and try to cut it as per OP3.
May be i can extend it to black bars where the screen ends.

I decided to try the Orzly tempered glass. Normally I'm a huge fan of the Spigen Crystal and Ultra Crystal plastic ones - still almost no noticeable marking on the Crystal I have on my LG G4, and the Ultra Crystal on my wife's Nexus 5 literally saved us a screen replacement last winter. I thought the screen HAD broken, down to ordering a replacement to put in it ... but when I peeled the Spigen off, the screen was fine. They don't have one for the OP3 yet though. So this time I thought I'd try something different with the tempered glass. If I don't like it, I'll have to keep looking.
Interested in seeing if there are any good plastic screen protector recommendations though, in case I find that I'm not a fan of the glass ones.

Best non-glass screen protector.
BestSkinsEver Thank me later (or don't b*tch at me when you F up the wet install, ZAGG style)

I actually really like the original film protector. I still have mine on and I got the phone as soon as t was available and it still looks great.
Anyone know where I can get another? They don't seem to have them at the oneplus store.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

Get this blindly-
http://www.amazon.in/Orzly%C2%AE-Protector-OnePlus-Multi-Pack-SmartPhone/dp/B01H7BTSM0?ie=UTF8&redirect=true&ref_=ya_st_dp_summary
You can thank me later

Palauv said:
Get this blindly-
http://www.amazon.in/Orzly%C2%AE-Protector-OnePlus-Multi-Pack-SmartPhone/dp/B01H7BTSM0?ie=UTF8&redirect=true&ref_=ya_st_dp_summary
You can thank me later
Click to expand...
Click to collapse
Why later, have it now!

bryanus said:
I actually really like the original film protector. I still have mine on and I got the phone as soon as t was available and it still looks great.
Anyone know where I can get another? They don't seem to have them at the oneplus store.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Its of good quality, they could cover sides bit more, as curve starts from where black line starts, i guess the made it short for people to buy their accessories and remove it, probably.

GeneralDisaray2 said:
Best non-glass screen protector.
BestSkinsEver Thank me later (or don't b*tch at me when you F up the wet install, ZAGG style)
Click to expand...
Click to collapse
Thanks bro.

Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr

Well I started the Orzly plastic film trend on Xda. Its the first thing I wanted to do after 4 failed tempered glass abd its still the best. Got mine at 499 of 5 pieces. The first one is still in use and I love it.
Sent from my ONEPLUS A3003 using Tapatalk

sangalaxyi9003 said:
Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr
Click to expand...
Click to collapse
Let me know the quality please. I buyed the first one some days ago and I'm waiting fot the delivery.

sangalaxyi9003 said:
Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr
Click to expand...
Click to collapse
They look tempting, but i am not sure how they will even cover the curves, i heard they come off from edges, it would have been better if they had left the curves exposed, just cover the complete LED, just up to the point where LED starts.
Hopefully it will give surprising results.

khandelwalgaurav said:
Well I started the Orzly plastic film trend on Xda. Its the first thing I wanted to do after 4 failed tempered glass abd its still the best. Got mine at 499 of 5 pieces. The first one is still in use and I love it.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Do you have to wet it, to apply?

Current case and screen protection

I was going through this thread to see what screen protectors and cases you all people use as a kind of recommendation for my next case and screen protector. But all you people are scattered in different posts discussing things.
So lets make things easy for everyone.
Post your current setup (the past one as well if you want) and your view about that. And the links and some photos would be loved for sure. :good:
.
.
And a thanks if this thread helps you get a case or skin or screen protector in future :laugh:

Am myself using Bracevor wallet cover with the the stock screen film. No skin whatsoever. (planning to change this all soon)
Amazon India: http://www.amazon.in/Bracevor-BROPL3ELLCBR-Premium-Leather-Cover/dp/B0157OUT7C

The oem carbon fiber case paired with the oem curved screen protector is absolutely perfect. Can't even feel the seam between the glass and case. I hate cases in general, but I adore this setup.

Using the orzly multifunction wallet with the official tgsp.
Works a treat.
Sent from my ONEPLUS A3003 using Tapatalk

Sandstone case and nude screen. Can't stand screen protectors

Using the OtterBox case from OnePlus with the official curved tempered glass protector. I love the case, but I botched the TGSP installation, so I'll probably end up ordering a new one.

Rhinoshield bumper with matte nilikin guard

blotting.paper said:
Rhinoshield bumper with matte nilikin guard
Click to expand...
Click to collapse
How's the day to day usage with bumper case? Is it worth the money? Any comparison with other cases you have used?

The main reason for getting the case was to showcase the metal back of the op3. And it does that beautifully.
The quality is great, however its a bit loose on the sides (by no means it will pop out, needs considerable effort) due to which sometimes the alert slider does not work, you have to press and move it. Is not noticeable unless you pull at the sides.
Does not add any thickness overall apart from the upper and the lower lip on the back. However the phone feels a bit broader in hand.
Overall happy, although pricey for 1700 inr ordered via their site 5$ discount covered the shipping.
I also have the sandstone and spigen tough armor.

blotting.paper said:
The main reason for getting the case was to showcase the metal back of the op3. And it does that beautifully.
The quality is great, however its a bit loose on the sides (by no means it will pop out, needs considerable effort) due to which sometimes the alert slider does not work, you have to press and move it. Is not noticeable unless you pull at the sides.
Does not add any thickness overall apart from the upper and the lower lip on the back. However the phone feels a bit broader in hand.
Overall happy, although pricey for 1700 inr ordered via their site 5$ discount covered the shipping.
I also have the sandstone and spigen tough armor.
Click to expand...
Click to collapse
I ordered mine last week. Still havent received
Does it go along with preapplied screen guard or will pop out? Have you tried 1+ official curved/plain screen protector with rhinoshield? I have plain one, thinking to using it with rhino bumper

silentkiller143 said:
I ordered mine last week. Still havent received
Does it go along with preapplied screen guard or will pop out? Have you tried 1+ official curved/plain screen protector with rhinoshield? I have plain one, thinking to using it with rhino bumper
Click to expand...
Click to collapse
I have always used a nilikin matte protector, had no trouble with any of the cases i have used.
I received mine after 15 days

blotting.paper said:
I have always used a nilikin matte protector, had no trouble with any of the cases i have used.
I received mine after 15 days
Click to expand...
Click to collapse
15 days Gonna have to wait for some more time then.
Can you give me link to this screen protector. cant find it on amazon.in

silentkiller143 said:
15 days Gonna have to wait for some more time then.
Can you give me link to this screen protector. cant find it on amazon.in
Click to expand...
Click to collapse
Out of stock at the moment.
http://www.amazon.in/Original-Nillk...scsubtag=769f1abc-2431-46a1-9b97-1585df1433f8

blotting.paper said:
Out of stock at the moment.
http://www.amazon.in/Original-Nillk...scsubtag=769f1abc-2431-46a1-9b97-1585df1433f8
Click to expand...
Click to collapse
Ok. Thanks!

blotting.paper said:
Out of stock at the moment.
http://www.amazon.in/Original-Nillk...scsubtag=769f1abc-2431-46a1-9b97-1585df1433f8
Click to expand...
Click to collapse
Buy the gadgetshieldz screen protector. It is also film type one and durable too. Also it gives you the option of full phone film.

I have ordered one because my onePlus3 has many scratches one the surface, but the protector has reduced the display quality. Is there any screen protector that does not reduce the display quality? I have removed the protector, because for me it is better with scratches on the display than having reduced contrast by protector.
By the way, i never had scratches on any Phone display. The resistance to scratches seems to be very bad on this phone.

Köppchen said:
I have ordered one because my onePlus3 has many scratches one the surface, but the protector has reduced the display quality. Is there any screen protector that does not reduce the display quality? I have removed the protector, because for me it is better with scratches on the display than having reduced contrast by protector.
By the way, i never had scratches on any Phone display. The resistance to scratches seems to be very bad on this phone.
Click to expand...
Click to collapse
Gadgetshieldz. Try there screen protector

Using no case, only using a gadgetshieldz screenprotector which you hardly notice. Best screen protector around IMO.

Roykooiman said:
Using no case, only using a gadgetshieldz screenprotector which you hardly notice. Best screen protector around IMO.
Click to expand...
Click to collapse
Yes that's true. I too vote them as the best screen protector currently available for oneplus 3/3T

Roykooiman said:
Using no case, only using a gadgetshieldz screenprotector which you hardly notice. Best screen protector around IMO.
Click to expand...
Click to collapse
But it doesnt protect against falls does it? THE screen will crack..😣

Recommended screen protector?

I just received an IQ Shield Matte screen protector and I'm really disappointed. It screws up the colors and whites have a rainbow effect to them. I took it off and now I'm looking for a new one. I'd like one that is:
1. Anti-glare
2. Anti-fingerprint
3. Clear and doesn't screw with this beautiful display.
Any recommendations?
Thanks in advance!

Thee one and only,,,,but more importantly expensive whitestone dome screen protector is probably the most I've heard of working...45 to 50 dollars tho

Any you can recommend about $20 and under?

First I tried the Spigen NeoFlex film screen protectors and they are garbage. Then I ordered a cheapo full cover tempered glass screen protector from eBay and it works great.
http://www.ebay.com/itm/3D-Full-Cov...ector-For-Samsung-Galaxy-Note-8-/332345555824
I've only been using it for about a week so I can't say how well it will keep dust out. Sensitivity is great, I don't notice it's on at all. It's not Anti-glare or Anti-fingerprint but it's only $8.

I'm using the i-blason tempered glass.
Under $20, it's still on, doesn't interfere with the screen.
It's still going to collect fingerprints and smudges due to the oils in our skin, but it wipes off easily.

jellyhead said:
First I tried the Spigen NeoFlex film screen protectors and they are garbage. Then I ordered a cheapo full cover tempered glass screen protector from eBay and it works great.
http://www.ebay.com/itm/3D-Full-Cov...ector-For-Samsung-Galaxy-Note-8-/332345555824
I've only been using it for about a week so I can't say how well it will keep dust out. Sensitivity is great, I don't notice it's on at all. It's not Anti-glare or Anti-fingerprint but it's only $8.
Click to expand...
Click to collapse
thats becuz the neoflex is a rubber 3m film, not plasti-glass. i honestly like Spigen Neoflex screen protector. only downfall is using the pen on it leaves lines where youve drawn .. but cant be felt by your touch
Sent from my SM-N950U using XDA-Developers Legacy app

mlock420 said:
Thee one and only,,,,but more importantly expensive whitestone dome screen protector is probably the most I've heard of working...45 to 50 dollars tho
Click to expand...
Click to collapse
I've never seen this warning before on anything from Amazon.

roaduardo said:
I've never seen this warning before on anything from Amazon.
Click to expand...
Click to collapse
Somebody got a knock off, I read. The screen protector he got was plastic instead of glass.
Sent from my SM-N950U using XDA-Developers Legacy app

roaduardo said:
I've never seen this warning before on anything from Amazon.
Click to expand...
Click to collapse
Oh wow that sucks but for some reason YouTubers recommend this for s8 and note 8 idk man it looks promising but yeah that warning I've never seen before

There are plenty of discussions under the accessories section
But I'd say don't bother. I had one tempered glass protector on for an hour before it annoyed me too much and I removed it! Destroys the feel and use of the phone.

I have been buying the RhinoShield stuff for my stuff and its held up really well for me.
rhinoshield.io is where you'll find it.. (I havn't logged in long enough that I forgot my account info :/ )
edit: found my login info so now I can add the link:
https://rhinoshield.io/collections/samsung-galaxy-note-8
Plus, nobody else's stuff has any evidence that even suggests it actually works.
I havn't tried it for the note8 but I came by this thread while I was researching if anyone had so figure I'd mention it. It is expensive to get the whole kit (screen protector, bumper, and in this case rear glass protector), but I found it worth it..

I have a cheapo '2.5D' glass and its doing well. Touch response is worse mind.
There is a speaker hole at the top; this needs covering with a bit of tape or you wil get dust between the screen and the protector.

bonerp said:
There are plenty of discussions under the accessories section
But I'd say don't bother. I had one tempered glass protector on for an hour before it annoyed me too much and I removed it! Destroys the feel and use of the phone.
Click to expand...
Click to collapse

I purchased a relatively inexpensive TG protector. While it exhibits many of the drawbacks of TG protectors that aren't full-adhesive (i.e. all of them except the Whitestone Dome), it doesn't have quite the "rainbow effect" that I've seen with other protectors.
Its real downside, though, is its slickness ... I need a more paper-like surface to better control the s-pen. Just the tiniest bit of friction would help. I'm thinking that I may have to go to a film protector rather than TG to get that, though. Does anyone else have this issue with TG protectors?

eglesiaw said:
I just received an IQ Shield Matte screen protector and I'm really disappointed. It screws up the colors and whites have a rainbow effect to them. I took it off and now I'm looking for a new one. I'd like one that is:
1. Anti-glare
2. Anti-fingerprint
3. Clear and doesn't screw with this beautiful display.
Any recommendations?
Thanks in advance!
Click to expand...
Click to collapse
Ever since the introduction of the edge curved screen (and I have owned the lot) I have never found a decent screen saver. It is a subject on every forum here on XDA and concerning all the Samsung edge models.
I have taken recommendations only to find them useless. Some use a glue, some have a dotted appearance after application some just suck period!
I used a partial screen saver once that just covered the centre of the screen but even that proved awful. Even used Samsungs own on the Note 7 and though that was not glass it also was horrible.
If any peer here does find a working screen protector PLEASE let us know.
Ryland

Whitestone is the best.

I like the Spigen NeoFlex, it's been great so far for me. Went on easily, hasn't peeled off the corners/edge (and I use the Spigen Tough Armor case) and after the 12 hours to settle on the screen it looks great and writing on it with the s-pen feels good too. My personal opinion and the only one I've tried so far on my Note 8

faded03cobra said:
Whitestone is the best.
Click to expand...
Click to collapse
Can the Whiitestone be removed once it's been glued to the Screen?

yes

I got the Bodyguardz glass protector sold to me at the AT&T store (lazy me). The guy installed it and it's ok. Glass protectors have an innate problem in that they sometimes don't transmit touches to the touchscreen itself. This one is no different but it does fit well. And it has a lifetime free replacement policy. I'll keep it to protect my screen.

OnePlus 5T Official Tempered Glass Screen Protector Review

Hi folk,
With another OnePlus product comes another OnePlus attempt at making a tempered glass screen protector which works for it. Will it be this time that is the magic attempt?
If you dont want to or can't watch the video here are my thoughts:
Yes, they seem to have finally made a tempered glass which fits perfectly on the screen without much cut off. I say much as I think there is still a tiny cut off, but it's nowhere near as noticeable as it was on the 3/3t or 5. If you want to take a look, its on the video at around the 4:04 mark.
The quality is excellent, you can barely feel or see that it's there. There are no sharp edges as the screen tapers off at the edge. It's a full glue screen protector so there is no dot matrix or rainbox effects. You do however have to be fairly careful whilst applying it and taking it off its bed as it feels like it could snap fairly easy if you rush it.
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Let me know if you have any questions.
Jono

Thanks for that, good to know as I ordered one with my 5T.
Hopefully there is a decent bunch of 3rd party ones too.

A spigen tempered glass is my all time favorite screen guard.

niijonodhg said:
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Click to expand...
Click to collapse
Thanks for this. I wanted to know how much it will cut of the screen but its much lesser than earlier.
But i need to disagree something with you. You (and many others) said it was issue etc. on OP3/3T/5 what last TGSP cutted off screen. Well it wasnt really issue or fault on Oneplus side. They needed to choose to have adhesives only on sides and no cut-off or adhesives on fully but had to cut-off. That was because of OP3/3T/5 front glass design where glass started ro bend (2.5D) earlier than usual. Thats why black borders was bigger as otherwise you would get ugly halo's and nobody likes that.
About price. Dont know where you leave but here in Finland 20€ price is nearly cheapest TGSP avaible here. Usually TGSP's here costs around 25-50€ depending of phone model so 20€ is more than just normal price for us. So okay maybe its little pricey compared ro your country but on many others it isnt.

This is my first OP device so I know nothing about past issues, but this is by far the best fitting, best sealing TGSP I have ever installed. Typically with screen protectors the edges do not want to seal/stick but the squeegee made quick work of getting all the bubbles out. There are a few pieces of inevitable lint but not one single bubble.
It does cut a tiny bit of the screen off which gives a weird depth to the screens appearance so for that I give it 9/10. If it was totally clear or just had the black at the top and bottom it would be 10/10 for sure.

Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk

DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I'm using the original one and is perfect with the original case/Bumper.
Mine is not so perfect and the screen is slightly cover on the edge. is not a huge problem, but is noticeble if you see the phone from a side.
in any case is far better than the original plastic protector and perfect with a case.

DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.

niijonodhg said:
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
Click to expand...
Click to collapse
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk

Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.

DeathStroke said:
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Which case do you have?
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
Honestly, I haven't noticed.

niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
The one that came in the box. I want to order a 3d tempered glass and a premium case so that they can work together. Looking yet for a compatible combo.
Sent from my ONEPLUS A5010 using Tapatalk

niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
I just removed the protector to see how the screen looks naked. The "grainy-ness" is gone. I also noticed a potential problem with the protector. The adhesive doesn't go all the way to the top or bottom of the protector, so when I removed it I found a lot of dust stuck to the top and bottom bezel of the phone. This could cause scratches. Even though the scratches would not be on the display, I don't want scratches anywhere on the glass. If I keep this phone I'll try an IQshield.

With the bubbles settling behind, a lot of little dust has been captured.

I also notice grainy-ness. I'm likely going to ditch it and just go naked...

I just got my for 10€. And yes, it still crops a bit from both sides but not like OP3/3T/5. And yes, there is grainy-ness as stated above. You cant notice on black background but on white yes.

I bought the '5T full scratch protection' bundle with my phone. I have an unopened "3D Tempered Glass Screen Protector" and an opened (but unused) "Sandstone Protective Case". My plan was going to be to use the case until Spigen comes out with a 5T case, but I just decided to rock the case that came with my 5T instead.

lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
To be frank I wouldn't have noticed the grainy screen till I read your comment. But now that I've read it.... The screen protector does induce the grainy effect. It's a perfect fit imho, though it definitely does give out that grainy effect. I'm guessing I'll stop noticing it in a couple of days time.

I had an extra IQshield (wet apply) protector for a Pixel 2 XL. I cut a little off the top and it fit fine. I must say, the IQshield is very clear, no grainy screen for me.

I have to put my 2 cents in on this. The official tempered glass is pretty great. I had no issue installing, it stayed in place, zero bubble at all, and feels great. using it with the official sandstone case.

Supcase Unicorn beetle style series - Review

Hello all,
Just got my supcase delivered today and on first look it's really of premium quality and looks great on the phone. I had been looking out for cases from the launch date and none of them were upto the mark. I had been using supcase on my previous phones and they have always been great. So i sent them an email asking if unicorn beetle style would be available for the OnePlus 7T and got a positive reply that by November it would be available. And boom, here it is in Amazon india.
About the case :
Premium
Has a good camera cutout protection
Front display protection has a good lip on top and bottom (tempered glass applied)
Not a TPU case so no yellowish case after a few months
Cons - Makes the device slightly larger to hold but will get used to in a few days( but better than most of the cases out there).
Overall I'm really satisfied
Now let the pictures do the talking.
Oh btw i wanted a case that could show off the colour of the phone plus look good. I saw many transparent cases with black border but everything had one flaw - the camera cutout protection black strip was hiding the OnePlus logo a bit and it looked cheap(A few had their pictures posted as if the logo wasn't hiding but in real it was hiding the OnePlus logo). Guess only ringke had the correct cutout other than supcase.

Hi. Thank you for this review, was just looking at it.
Do you use the official oneplus tempered glass? Does it hinge the glass protector up like many others do? I have the official one and this is a must for me.

Question regarding the clear back; does it fill up with lint and dirt? I always felt that clear cases filled with lint and pocket **** when using it for a long period of time. Basically when I take off my 1+ case it's always got dirt in it anyway so I assume this would show through the clear back..

aleck0112 said:
Hi. Thank you for this review, was just looking at it.
Do you use the official oneplus tempered glass? Does it hinge the glass protector up like many others do? I have the official one and this is a must for me.
Click to expand...
Click to collapse
I have used tempered glass from glazed Inc and its similar to full screen tempered glass from official OnePlus and this case does not hinge.
Case is tempered glass friendly.

MrGimpGrumble said:
Question regarding the clear back; does it fill up with lint and dirt? I always felt that clear cases filled with lint and pocket **** when using it for a long period of time. Basically when I take off my 1+ case it's always got dirt in it anyway so I assume this would show through the clear back..
Click to expand...
Click to collapse
I too faced this issue using original tpu from oneplus.
I am not sure if this supacse will get filled up with dirt. For now nothing's inside the case. But I remember the OnePlus case had dirt inside it even on day one and i kept cleaning it every two days or so regularly.
From past few days there's nothing inside this clear case(supcase)

vicky2131 said:
I have used tempered glass from glazed Inc and its similar to full screen tempered glass from official OnePlus and this case does not hinge.
Case is tempered glass friendly.
Click to expand...
Click to collapse
Can you provide a top down image on the screen so I can see the case lip? May get a better idea with that. Thank you

aleck0112 said:
Can you provide a top down image on the screen so I can see the case lip? May get a better idea with that. Thank you
Click to expand...
Click to collapse
Hope this is clear.

I am supposed to get my pixel 5a tomorrow. I want a supcase but they do not have it yet. I may put off opeing the box until I get one.