Database Develop

[Q] somebody help me pleasee !!!!!!

i was flashing my samsung galaxy s via odin3 and when i hit start flashing it wrote down successful0/unsuccessful1 then i waited and nothing happend so i dissconnected the usb cable and the phone rebooted but unfortunately it didnt boot a black screen with a yellow triangle symbol on a dash between a pc and a phone icons showed up ....... soo after that it kept showing me the same icons and i couldnt enter the download mode or turn it on i tried to remove/reinsert the battery hundreds of times without any result also the usb is not recognized by odin or by kies what can i do ??? someone plz give me an application or a program so i can restore the mobile and reduce this problem

if it is still showing the phone to pc triangle u still can enter download mode ( vol down + back btn + power ). keep trying

pch.radu said:
if it is still showing the phone to pc triangle u still can enter download mode ( vol down + back btn + power ). keep trying
Click to expand...
Click to collapse
Just to clarify, the yellow triangle IS download mode. You need to have that on your screen (which means you're in download mode) in order to use Odin. Simply try again!

read this [GUIDE] Recovery options for "bricked" phone.

I have try you problem.
Turn it off ,dissconnected the usb cable
keep trying down + back + power
I can enter download mode again.

thank you all !
i was making a mistake but now i did it right thanks to u all and i flashed it and it is working just fine .......

[HELP PLZ] bricked ACE, no USB connection

Hi all,
i've bricked my ACE by flashing it to CM not by Odin but by pressing <Install from ZIP> in the recovery mode ...
After it i think the filesystem was destroyed (got errors like "E:failed to mount /system (Invalid argument)").
I would flash it again but this time by Odin, and first of all flash CWM... but the issue is my ACE is not recognized
by Windows when connected to USB. I have tried reinstalling Kies, Samsung drivers without Kies, different USB ports and also
different PCs -> no result :crying:
Is there a way to recover the filesystem without using USB? Or how can i connect that damn thing to USB with properly recognize?
I have tried to give ACE to Samsung service, but all that they wrote was: "... irreparable damage due to damp ..." WTF?!?!
Please someone try to help me.
Thanks a lot.

You can't do anything if even Samsung gave up on it (they can revive almost all of there phones) .
However you could post this info so someone else does not make the same mistake.
1. Full phone model info
2. ROM you were originally on
3. Which recovery you used
4. Odin version
5. Which CM you flashed
6. What carrier(operator) are you on (the phone might had been locked)

I have managed to check if the phone is actually working or not even in the particular case you mention where it does not seem to turn on at all.
1)Kill KiesTrayAgent.
2)Remove the battery and usb cable.
3)Plug usb cable (also to the computer).
4)Keep pressed all buttons; Vol Up, Vol Down, Home and Power.
5)Replace the battery.
6)Let go of the buttons.
7)Odin recognizes the phone but will not connect to it.
If it does not work (the key combination might be wrong), try again with Up, Home and Power or Down, Home and Power.
One of those 3 combinations worked for me and realized that the phone was hard bricked.
Eventually I managed to revive it (although not myself)

The only thing that you may do is press VolDown + menu + powerbutton with odin . It will open the download mode. If it not work, your motherboard is burned!
Sorry for my bad english.

I think you used stock recovery. U need custom extended recoveries like CWM 5 to flash roms.
Sent from my GT-S5830 using Tapatalk 2

Boot Loop

Hi.. I am little new with Note with ICS
It has entered in a boot loop where it reaches the home screen. and in about 10 sec reboots itself. I tried taking out the battery, still same problem. Than I tried putting it in recovery mode and resetting it to factory settings by pressing power,up volume and home button together, but it want go to recovery mode, samsung logo and model no comes up than black screen and again samsung logo and model no. Tried it with pluged in to PC as well.
Any help will be appreciated
Thanx
Abdur

Hello abdurm, could you tell us your current firmware? You would require to give us details from Settings > About phone.
Also, did you try flashing anything? If so, what was it?
By pressing the Volume Down button + Home button + Power button simultaneously, does your device enter Download mode?

YLNdroid said:
Hello abdurm, could you tell us your current firmware? You would require to give us details from Settings > About phone.
Also, did you try flashing anything? If so, what was it?
By pressing the Volume Down button + Home button + Power button simultaneously, does your device enter Download mode?
Click to expand...
Click to collapse
It dosen give me enough time to check firmware version, it reboots. It is on ICS. It is stock and I have not tried fashing or anything.
Yes it goes in download mode by pressing Volume Down button + Home button + Power button simultaneously.

Flash gingerbread rom in PC ODIN only and it will automatically reboot by itself but if still stuck in samsung logo go to recovery mode and wipe data and cache.

abdurm said:
It dosen give me enough time to check firmware version, it reboots. It is on ICS. It is stock and I have not tried fashing or anything.
Yes it goes in download mode by pressing Volume Down button + Home button + Power button simultaneously.
Click to expand...
Click to collapse
Download pre rooted gb rom from my signature and flash it via pc odin. Your phone must be in download mode and don't change any settings in pc odin.
Cheers

sahilarora2003 said:
Download pre rooted gb rom from my signature and flash it via pc odin. Your phone must be in download mode and don't change any settings in pc odin.
Cheers
Click to expand...
Click to collapse
Thank you very much. Just one last thing I dont have to be rooted to instal this ROM and it is ok to flash directly from ICS . Just downloadFilename: SGN_XX_OXA_KJ1_FACTORYFS.zip and flash it. And it will leave me with GB?

abdurm said:
It dosen give me enough time to check firmware version, it reboots. It is on ICS. It is stock and I have not tried fashing or anything.
Yes it goes in download mode by pressing Volume Down button + Home button + Power button simultaneously.
Click to expand...
Click to collapse
Apologies abdurm, I foolishly presumed you would have made a note of your device's firmware details at some point in the past. It was stupid of me to ask you for the said information.
abdurm said:
Thank you very much. Just one last thing I dont have to be rooted to instal this ROM and it is ok to flash directly from ICS . Just downloadFilename: SGN_XX_OXA_KJ1_FACTORYFS.zip and flash it. And it will leave me with GB?
Click to expand...
Click to collapse
1] Download the pre-rooted stock Gingerbread firmware, SGN_XX_OXA_KJ1_FACTORYFS.zip and extract it to get the SGN_XX_OXA_KJ1_FACTORYFS.tar file.
2] After doing so, run PC ODIN, select the PDA tab in it and point to the extracted file (SGN_XX_OXA_KJ1_FACTORYFS.tar). Auto Reboot and F.Reset Time will be selected by default. Do not select anything else.
3] Put your device in Download Mode and then connect it to your PC via the USB cable. The ID:COM label in PC ODIN will turn yellow indicating your device is connected and recognised.
4] Click on the Start button in PC ODIN and wait for the label above ID:COM to say Pass. After it does so, disconnect your device from your PC.
Your device will reboot and you will be on a stock Gingerbread firmware with root privilege.

YLNdroid said:
Apologies abdurm, I foolishly presumed you would have made a note of your device's firmware details at some point in the past. It was stupid of me to ask you for the said information.
1] Download the pre-rooted stock Gingerbread firmware, SGN_XX_OXA_KJ1_FACTORYFS.zip and extract it to get the SGN_XX_OXA_KJ1_FACTORYFS.tar file.
2] After doing so, run PC ODIN, select the PDA tab in it and point to the extracted file (SGN_XX_OXA_KJ1_FACTORYFS.tar). Auto Reboot and F.Reset Time will be selected by default. Do not select anything else.
3] Put your device in Download Mode and then connect it to your PC via the USB cable. The ID:COM label in PC ODIN will turn yellow indicating your device is connected and recognised.
4] Click on the Start button in PC ODIN and wait for the label above ID:COM to say Pass. After it does so, disconnect your device from your PC.
Your device will reboot and you will be on a stock Gingerbread firmware with root privilege.
Click to expand...
Click to collapse
Thank you very much, my note is finally working. How can I go to ICS, it doesnt show up in software update

abdurm said:
Thank you very much, my note is finally working. How can I go to ICS, it doesnt show up in software update
Click to expand...
Click to collapse
Hello again abdurm, I am glad to learn your device is up and running again. :highfive:
Now that you are on a rooted firmware, I would advice you not to avail an OTA update as there is a very high likelihood of it breaking/undoing the root privilege.
Personally, I have not ventured into Ice Cream Sandwich yet and thus I have no right to guide you with the process of acquiring it. But, based on your quoted post may I ask you if you desire to have stock Ice Cream Sandwich with or without root privilege?
I recommend you thoroughly read dr.ketan's threads which explain the subject at hand.

[Q] Briked - Recovery not working - download mode working

Samsung galxy mini S-GT5570 briked
WORKS: Download mode, it is recogneized by ODIN
NOT WORKS: Recovery mode and the screen it is almost dead it just blinks like he wants to start to show the samsung logo and shuts down.
TRIED: odin install original firmware from samfirmware didnt worked, tried one package tried by parts package, tried smaller versions and bigger versions of stock, none worked
Curios is that with odin it flashes all successfully but it doesnt go in recovery mode or anything, all it works is just vol up + power = ARM dump and vol down + home + power = download mode
I resofted with a custom miui rom for galaxy mini with CWM after reboot dead.
Any ideas, i would apreciate???

have u try froyo firmware or/and three packs firmware?

If the stock not working means bootlooping, then wipe data from stock recovery.
Tapatalk 2-vel küldve az én GT-S5570-ről

Put the Phone in download mode
and Flash stock Rom and Stock Recovery from Odin the only way to Unbrick Your Phone

Your doomed if you still have warrenty phone samsung and send it to them, do not mention roms or flashing say either were playing game and went off or you were in middle of a call, you tried a freinds battery and charger tried plugging into computer and looked online for answers and been advised to phone them.
DO NOT MENTION FLASHING, ROOTING, OR ROMS

robertutzu said:
Samsung galxy mini S-GT5570 briked
WORKS: Download mode, it is recogneized by ODIN
NOT WORKS: Recovery mode and the screen it is almost dead it just blinks like he wants to start to show the samsung logo and shuts down.
TRIED: odin install original firmware from samfirmware didnt worked, tried one package tried by parts package, tried smaller versions and bigger versions of stock, none worked
Curios is that with odin it flashes all successfully but it doesnt go in recovery mode or anything, all it works is just vol up + power = ARM dump and vol down + home + power = download mode
I resofted with a custom miui rom for galaxy mini with CWM after reboot dead.
Any ideas, i would apreciate???
Click to expand...
Click to collapse
Have you done the tutorial of flashing stock rom via odin rightly?
Have you flashed your phone successfully? make sure that the installation is complete, appear a blue confirmation "PASS"..
If your firmware doesn't in one package, make sure that you choose the right file, I mean :
- BOOT = APBOOT_XXX
- PHONE = MODEM_XXX
- PDA = CODE_XXX
- CSC = GTS5570_CSC_XXX
and DON'T TAKE OFF your USB cable untill the installation is complete, appear a blue confirmation "PASS"..
For getting flashed successfully, please make sure that :
- your computer did not installed Samsung Kies application, I think it may interfere your installing stock-rom process, so please un-install it first..
- you have installed the right or true Samsung USB driver..
- your micro-usb cable is support for your phone
- your battery phone in 90%
- use odin v4.38 or odin v4.42

[Q] samsung galaxy s3 GT-I9305

Hi Evevryone, Please i need help, my samsung gt-i9305 got stucked on the samsung logo, i took out the battery and now displays a white background with black lines. have been trying to re intall the firmware....i downloaded he correct firmware and also installed odin 3.09 , i believe i followed the right process (extracted it on my computer and also the firmware), i opened odin put my phone to download mode, (pressing the power button + home+ down button together the the up volume to continue). wen i connect my phone to the computer and press start, it says fails.
i have discovered that id:com is not changing colour when i connect my phone. and also on kies it keeps showing connecting but never connects.
i am using original cable, changed laptops, used different pots, all the same.
please help. what can i do?

wahlay said:
Hi Evevryone, Please i need help, my samsung gt-i9305 got stucked on the samsung logo, i took out the battery and now displays a white background with black lines. have been trying to re intall the firmware....i downloaded he correct firmware and also installed odin 3.09 , i believe i followed the right process (extracted it on my computer and also the firmware), i opened odin put my phone to download mode, (pressing the power button + home+ down button together the the up volume to continue). wen i connect my phone to the computer and press start, it says fails.
i have discovered that id:com is not changing colour when i connect my phone. and also on kies it keeps showing connecting but never connects.
i am using original cable, changed laptops, used different pots, all the same.
please help. what can i do?
Click to expand...
Click to collapse
Frist change usb cable, next check you have all drivers, seems like driver issues to me