Hi,
I am facing the following 2 issues with my Xperia T when using it in the car:
1. I have an USB port in the car that I could use in the past with the Arc for charging the phone and sometimes even for playing music from SD card instead of bluetooth. When I plugged the T I got "Unrecgnized device" message from the car and I cannot charge the phone nor play music/browse from the usb port. Is this because the special port Xperia T is having? is there any solution to this (I just want to charge the phone and I don't want to use a converter from the car lighter)
2. When connected via bluetooth I can easily play music/jump to next song, pause, call, answer calls from the car controls but sometimes when I reconnect the phone player is paused and I cannot resume (only if I play from phone). Also when browsing through the songs, sometimes the name of the song/artist is not changed in the car player. Have you tried this? Do you have such issues? With the Arc was working perfect (I had Apolo player and Jely bean already)
Thanks,
Mugur
http://mugur-ionescu.ro/tag/xperia
It might because the phone is in MTP mode by default. Try changing it to mass storage mode in Settings, Xperia and see if that fixes the charging issue. Grasping at straws but it might work and you might be able to access your music that way too if supported by your stereo.
(Music access with mass storage mode works for me on my fathers car.)
emuX said:
It might because the phone is in MTP mode by default. Try changing it to mass storage mode in Settings, Xperia and see if that fixes the charging issue. Grasping at straws but it might work and you might be able to access your music that way too if supported by your stereo.
(Music access with mass storage mode works for me on my fathers car.)
Click to expand...
Click to collapse
It worked!! Thanks
Related
i use my TD to play music in my car, so i connect it with the USB entrance of my car radio, i have to choose 'DiskDrive' else it doesn't work...
(just to say, sometimes the connection goes dead and i have to reconnect it wich is jdkfjmkdkfjfkjjsfksdkfj...)
now while listening to my music, i also wonna use tomtom, but tomtom is installed in my internal storage (WE map = 1.7 GB) so i can't access it because my TD is connected with my radio as a 'diskdrive'
does anyone know a solution for this???
http://www.mymemory.co.uk/USB-Flash-Drives/Kingston/Kingston-4GB-Data-Traveler-USB-Flash-Drive
just so u know, i allready tried installing tomtom application on my diamond and only the maps on the internal storage...
same result
Davey101 said:
http://www.mymemory.co.uk/USB-Flash-Drives/Kingston/Kingston-4GB-Data-Traveler-USB-Flash-Drive
Click to expand...
Click to collapse
good hint, problem is, i wonna know if this is possible, cuz i just ordered a new car and it doens't have a radio USB input, but i can connect my TD to it with some accessoires, but if i can't play my music and tomtom in the same time i will have to buy an ipod or so
nickgeys said:
good hint, problem is, i wonna know if this is possible, cuz i just ordered a new car and it doens't have a radio USB input, but i can connect my TD to it with some accessoires, but if i can't play my music and tomtom in the same time i will have to buy an ipod or so
Click to expand...
Click to collapse
I don't think it's possible. Even if it were then a separate USB flash drive (plus a Diamond car charger) would always be a better solution.
What accessories? Do you mean an audio cable, feeding the audio out from the diamond to an aux input on the head unit? If that's the case then you don't need access to the internal storage.
As Davey said, if you're using a USB <--> Stereo adapter, then the phone isn't in disk-drive mode, and therefore you can use GPS and Windows Media Player (or whatever) at the same time.
I did this not more than 15 minutes ago.
hexydes said:
As Davey said, if you're using a USB <--> Stereo adapter, then the phone isn't in disk-drive mode, and therefore you can use GPS and Windows Media Player (or whatever) at the same time.
I did this not more than 15 minutes ago.
Click to expand...
Click to collapse
lol i doubt that, but i'll try it when i have my new car... when plugged in USB drive i HAVE to use 'disk-drive' cuz it won't work with active sync...
nickgeys said:
lol i doubt that, but i'll try it when i have my new car... when plugged in USB drive i HAVE to use 'disk-drive' cuz it won't work with active sync...
Click to expand...
Click to collapse
You're right in that it probably won't use activesync.
You're wrong in that it probably won't use "disk-drive" either. If it did, you could just use a USB pen drive instead. You certainly couldn't use the Diamond running TomTom, given that this is NOT possible.
As explained, you're probably talking about a simple USB audio cable. Don't expect it to sound very good and don't expect to be able to control the music from your head unit. An iPod may turn out to be a better option seeing as many head units with iPod adapters feature full iPod control. Good luck!
@nickgeys
I've got the same problem as you.
I've put one USB cable beetwen the Diamond and the car radio.
the car radio see an USB storage drive and scan it to find mp3 (5 min for me, my drive is 3/4 full).
So yes, we use "disk-drive" on the diamond in a car.
Perhaps we didn't want to hear "turn left" on the radio, perhaps we want to make a phone call while listening music and following GPS instructions.
Perhaps we didn't want to manage multiple MP3 folder (one on the Diamond, one on the USB card for the car...)
Perhaps we want to use the car remote control on the driving weel to switch between albums..... many reason
I won't buy a USB storage card or an Ipod !!!!! When i go to a car garage to repair my car, i don't expet to hear the mechanic telling me to buy a bike.
I've already use an USB storage card for my wife music (far from my taste)
I want to share on the USB only a folder.
BTW, i understand that the 'disk-drive' function plug the usb directly to the storage for performance reason. When you transfert files by ActiveSync and DriveStorage, we can see different tranferts speed.
Well, if you have a bluetooth enabled car stereo, your problems will be solved
Anyways, do you only have a usb port in your car stereo? Don't you have an AUX (mini-jack, 3,5mm)? Because if you do, I believe you can use an usb to 3,5mm adapter and plug it to your AUX...if I'm not mistaken? Haven't tried this myself tho, cause I got myself a Sony Bluetooth car stereo
Thank you for you help, but this didn't give response to my answer.
I know how to plug à 3.5 mn on my car radio.
but i want tomtom sound (radar alarm) on the phone, and music in the car radio.
With your 3.5mn jack solution, how do you
- use the car remote control ?
- make a phone call while listening music ?
Buy an Ipod ?
Don't you think it's cheaper to burn a CD-rom with mp3 on it ?
The question was : How to limit the usd driver to one folder and not the entire 4gb storage.
For those how read "how to listen music in my car", please re-read the question.
I tried searching, no dice. I tried asking in the tips and tricks thread, nobody answered, so I'll ask here. Is there a way to force the G1 into mass storage mode? I want to connect it to my car stereo via usb, but the radio won't detect it, so the G1 never gives me the option to mount. If I could force it into mass storage mode, I'm fairly sure it would connect. Is it a simple terminal command? All help is appreciated.
edit: sorry, misread post ><
I do this occasionally. What I found is that if I have "USB debugging" on in the phone settings the G1 doesn't detect the connection and give me the option to mount the sd card. If I turn it off, it immediately detects the connection.
I leave USB debugging off all the time. Anyone know how to force the SD card into mass storage mode like you could in RC28?
Dowload AnyCut from the market
create a new shortcut
activity
scroll down and pick SD card
the short cut should be on your desktop. I've tried this on my car stereo and couldn't get it to work. Let me know if you better luck
Yah my Pioneer FH-P8000BT hates my G1 USB no workie, just errors out after 20 seconds or so. Pioneer punted when I emailed them saying that they have no plans to update their support of devices with this head unit; bummer. At least receiving calls on it via BT works okay. Hoping with the full bluetooth stack to be released that the voicedialing app might actually revised to be worth a **** so that you can activate it via the stereo like my last phone. And also maybe contact transfer/sync might actually work for me
So close... so frustrating!
Would also love to see a solution to having the option to automount on USB connection, as per OP.
bitbybit said:
Yah my Pioneer FH-P8000BT hates my G1 USB no workie, just errors out after 20 seconds or so. Pioneer punted when I emailed them saying that they have no plans to update their support of devices with this head unit; bummer. At least receiving calls on it via BT works okay. Hoping with the full bluetooth stack to be released that the voicedialing app might actually revised to be worth a **** so that you can activate it via the stereo like my last phone. And also maybe contact transfer/sync might actually work for me
So close... so frustrating!
Would also love to see a solution to having the option to automount on USB connection, as per OP.
Click to expand...
Click to collapse
Did you uncheck the "USB DEBUGGING" in Development?
polaris0352 said:
I leave USB debugging off all the time. Anyone know how to force the SD card into mass storage mode like you could in RC28?
Click to expand...
Click to collapse
Sorry that doesn't work for you. Just for reference, the G1 recognizes and works with the usb port on the Dual XDM-6400BT just fine. The bluetooth works as well, but I assume all bluetooth capable decks will.
I have the G1 connected to my stereo but I use a converter that came with my diamond. Converts mini usb to stereo 3.5mm or 2.5mm headphone jack. That goes to the crossover which connects to the amp and I have my music without a head unit.
I stopped using the G1 and use my diamond because it comes with a equalizer which makes a noticable difference in sound between the two.
bwWing said:
Sorry that doesn't work for you. Just for reference, the G1 recognizes and works with the usb port on the Dual XDM-6400BT just fine. The bluetooth works as well, but I assume all bluetooth capable decks will.
Click to expand...
Click to collapse
I have the Dual but the one that doesn't have the BT. The G1 picks up the connection and the unit even looks for music file but say "NO FILES". How did you get yours to work?
saul972 said:
Did you uncheck the "USB DEBUGGING" in Development?
Click to expand...
Click to collapse
Yah, I've tried both ways; no difference unfortunately. Head unit shows "Format Read" for approx 20 seconds before giving me a "USB N/A" display and doing nothing.
Thus far I've heard of people having success with at least some Clarion and some Dual decks. I can't tell if the phone is to blame or the car stereo manufacturers... seems like obviously somebody isn't supporting the full USB Mass Storage spec properly, but hard to point the finger when the G1 works fine on my computer and the car stereo works fine with a USB thumbdrive. *shrug*
saul972 said:
I have the Dual but the one that doesn't have the BT. The G1 picks up the connection and the unit even looks for music file but say "NO FILES". How did you get yours to work?
Click to expand...
Click to collapse
I didn't have to do anything special to get it to work, it just worked the first time I plugged it in. I can tell you some more about my setup. I'm using a 4GB sandisk sd card in the phone. My music is all mp3 and in the path \music\[album name]\*.mp3.
bwWing said:
I didn't have to do anything special to get it to work, it just worked the first time I plugged it in. I can tell you some more about my setup. I'm using a 4GB sandisk sd card in the phone. My music is all mp3 and in the path \music\[album name]\*.mp3.
Click to expand...
Click to collapse
Cool. I have a Kingston 8gb class 4 but I have it partitioned to have my apps run on it. I wonder if that has anything to do with it. I'm gonna try it on a different sd card later see what happens
Thanks for the info
Just a quick update for anyone who happens upon this thread. I just upgraded to the 1.5 ION Cupcake version of Android and am happy to report that in conjunction with disabling USB debugging on the G1, my Pioneer FHP800BT / FHP8000BT is now able successfully mount my G1 as a USB device
On a semi-related note, Bluetooth stereo (basic back/next, no browsing or id3 support) and phonebook downloading also work now as well.
Now if only I could convince Google to bring back support for automatic USB mounting and bluetooth/gps toggling via Locale or some such, I'd be a *really* happy camper
Hi all,
I'm searching for the most ideal situating to play the music from my phone in my car.
My new idea was to use a car hifi system that has a USB port, the advantage of this is that I only have to connect 1 cable.
And when that's done, it automatically charges..
And I hope that the car player has good control for exporing the files on my SD card..
My question is, before ordering one, does it work good? Does someone have bad experience's with this?
Working slow, bad control of your audio files? Tips suggestions?
I had a car radio which had sd and usb input
if the device is set to usb storage mode then it should act
as a usbStick would and the radio would have
access to anything on the sdcard
it worked ok for me with normal sdcards but it was stolen before
i tried using it with my phone
The optimal setup is a bluetooth A2dp one, so that you never even need to take the phone out of your pocket. Use MS Voice Command, and you can even seek your tracks by voice.
As for USB, it won't work, unless you have a custom ROM with the HTC Mass Storage option.
are you sure mine comes with the option to work as mass storage under usb to pc in settings
but of cause haven't tried it with a car radio but it sure works as a usbstick in computers
First off al, in the standard roms, there is a option under connections, where you can switch from activesync to mass storage..
Bluethooth audio will be not as good as the original output of the phone, and, my most important thing, it won't charge..
But, i just orderd a very cheap radio with usb and a aux input..
( elta 7527 )
Will let you guys know when it's installed..
Yes, Xperia comes with Mass Storage option and many cabs available if your ROM doesn't have it.
I got a head unit with USB and as long as set as mass storage it's just like an SD card. For simplicity's sake after a while I got tired of hooking my phone up to the radio and just bought a 32gb usb stick for cheap at Office Max.
wallie-s said:
First off al, in the standard roms, there is a option under connections, where you can switch from activesync to mass storage..
Bluethooth audio will be not as good as the original output of the phone, and, my most important thing, it won't charge..
But, i just orderd a very cheap radio with usb and a aux input..
( elta 7527 )
Will let you guys know when it's installed..
Click to expand...
Click to collapse
Wow, I guess I learned something new, I just figured the Mass Storage option wasn't there, as it doesn't pop up like in the Touch Flo 3D ROMS.
As far as Stereo BT audio quality. You are right, but you'd be hard pressed to be able to discern ANY difference in quality in a car, and I'd call it impossible to discern while actually driving.
Hi Folks,
i'm using USB-ROM on my N7 3G 32GB. My setup consists of a passiv USB-HUB, Sabre USB DAC and a 128GB USB 3.0 Flash Drive.
I checked the FI-Mode and all media-related options in the ROMs settings. By turning the ignition on and waking the tablet, the flash drive is shown as connecty under "slave devices", but it's not mounted and Poweramp could not resume the playback. After every wakeup i had to reboot the tablet, than it is working until i turn the ignition off.
Does someone have advise for me?
Just got my Moto X4 and it won't connect to my car stereo via USB like it should. Bluetooth works just fine for the most part (it does blank out for a few seconds every once in a while), but I want to connect to AppRadio on my car stereo for better sound and functionality.
I have a Pioneer AVH X3800BHS stereo in my car that has an AppRadio mode that I'm trying to connect to through USB, but the phone has to be in MTP mode. I'm able to click USB settings and see the option for MTP, press that and the phone automatically talks to the car stereo for a second and launches the AppRadio app but then immediately reverts back to charging only mode.
Is there any way to force the phone to stay in MTP mode, or does anyone have any thoughts on what's wrong? I have seen that a lot of people have had issues connecting to Android Auto, so I wonder if the same issue is causing this.
Stuff I've tried:
different USB cables
USB debugging on/off (restarted phone after changing)
Uninstall/re-install AppRadio app
in developer settings- changing Select USB Configuration setting to MTP, PTP, RNDIS, Audio Source (i've tried all the options just to see if would work.. it didn't)
swearing at the phone
turning Bluetooth off
resetting car stereo
turning off fingerprint login
activating car stereo as trusted device
Btw, the phone connects to my PC just fine and stays in MTP mode.
I can't think of anything else to try unless there's a way to force the phone into MTP and somehow make it stay there!
Is this just not going to work until possibly the Pi update? I've thought about rooting and trying another ROM but would prefer to keep the phone stock at least for a while.