Related
Hi all,
I'm searching for the most ideal situating to play the music from my phone in my car.
My new idea was to use a car hifi system that has a USB port, the advantage of this is that I only have to connect 1 cable.
And when that's done, it automatically charges..
And I hope that the car player has good control for exporing the files on my SD card..
My question is, before ordering one, does it work good? Does someone have bad experience's with this?
Working slow, bad control of your audio files? Tips suggestions?
I had a car radio which had sd and usb input
if the device is set to usb storage mode then it should act
as a usbStick would and the radio would have
access to anything on the sdcard
it worked ok for me with normal sdcards but it was stolen before
i tried using it with my phone
The optimal setup is a bluetooth A2dp one, so that you never even need to take the phone out of your pocket. Use MS Voice Command, and you can even seek your tracks by voice.
As for USB, it won't work, unless you have a custom ROM with the HTC Mass Storage option.
are you sure mine comes with the option to work as mass storage under usb to pc in settings
but of cause haven't tried it with a car radio but it sure works as a usbstick in computers
First off al, in the standard roms, there is a option under connections, where you can switch from activesync to mass storage..
Bluethooth audio will be not as good as the original output of the phone, and, my most important thing, it won't charge..
But, i just orderd a very cheap radio with usb and a aux input..
( elta 7527 )
Will let you guys know when it's installed..
Yes, Xperia comes with Mass Storage option and many cabs available if your ROM doesn't have it.
I got a head unit with USB and as long as set as mass storage it's just like an SD card. For simplicity's sake after a while I got tired of hooking my phone up to the radio and just bought a 32gb usb stick for cheap at Office Max.
wallie-s said:
First off al, in the standard roms, there is a option under connections, where you can switch from activesync to mass storage..
Bluethooth audio will be not as good as the original output of the phone, and, my most important thing, it won't charge..
But, i just orderd a very cheap radio with usb and a aux input..
( elta 7527 )
Will let you guys know when it's installed..
Click to expand...
Click to collapse
Wow, I guess I learned something new, I just figured the Mass Storage option wasn't there, as it doesn't pop up like in the Touch Flo 3D ROMS.
As far as Stereo BT audio quality. You are right, but you'd be hard pressed to be able to discern ANY difference in quality in a car, and I'd call it impossible to discern while actually driving.
Hi everyone,
I have a 2010 Honda Insight model with a USB compatible car radio.
I have owned other phones and the car radio supports iPhone 3G, Nexus One and an ordinary USB flash drive.
However a Samsung Galaxy S it does want to recognize. It says first USB LOAD and later UNSUPPORTED on the display.
I have tried several methods on the phone after USB is plugged in: click on home button after MTP connect screen appears, put USB in debug mode and choose to connect drive after USB dialog appears.
Does not work with and without external SD.
Is it the MTP background process that bothers the car radio?
Or it does not support drives which are partioned into several filesystems. The first filesystem is FAT32. But why the Nexus One is supported?
Any clues are very welcome!
not sure but this is my guess.
the MTP is not what the car is expecting. It expects a mass storage usb-drive. In settings you will find usb-options. There you can set it to be recognised as a mass storage device instead.
By some odd reason you also have to pull down the infoscreen and click usb, and then click mount
thanks for your help
in my phone i dont have settings to choose MTP vs MSC (mass storage device).
I did choose in info screen for mass storage device and I connected, but the car radio did not want to recognize.
How can I kill the mtp background process? What is the process name?
i have the same problem with my 2009 Civic Si
I tried all of the usb modes, with debugging on and off for each. still no luck.
insteads of USB, use bluetooth
for usb to work, you need to mount the drive, and make it run as a mass storage device
Is there any other solution for a car without Bluetooth?
I also have a Honda Civic with the USB audio and a Galaxy S Captivate phone. Every connect method I've tried so far fails. Has anyone gotten this to work? My car doesn't have Bluetooth.
Any help is appreciated. I am welcome to solutions that include rooting and loading a different ROM.
I have the same problem on Honda stereo... Is it possible to update the care stereo itself? Maybe someone could develope this into a ROM?
I a have a Samsung Vibrant and a 2010 Honda Civic LX. I used a "Dynex - Microphone Headset for Select Music Mobile Phones" Model: DX-MP3MA SKU: 9535327 (from Best Buy) and attached that to my phone. Then I attached a "Dynex 3' 3.5 mm stereo Audio Cable" Model: DX-MP353B SKU: 8915178 to the "Aux" input underneath the "Lighter". It worked PERFECTLY! It also works perfectly when attached to a Yamaha Home Theater System that was made to be compatible with iPhones/iPods. I used the input for "Portable." I hope this helps!
Obviously I attached both cables to one another.
In fact I am listening to Pandora (using Samsung Vibrant) connected to my Yamaha Home Theater right now and it sounds awesome.
prometeoprometheus said:
In fact I am listening to Pandora (using Samsung Vibrant) connected to my Yamaha Home Theater right now and it sounds awesome.
Click to expand...
Click to collapse
Total cost: $ 23.01
illusoryphoenix said:
I also have a Honda Civic with the USB audio and a Galaxy S Captivate phone. Every connect method I've tried so far fails. Has anyone gotten this to work? My car doesn't have Bluetooth.
Any help is appreciated. I am welcome to solutions that include rooting and loading a different ROM.
Click to expand...
Click to collapse
Please see my solution.
4myra said:
Hi everyone,
I have a 2010 Honda Insight model with a USB compatible car radio.
I have owned other phones and the car radio supports iPhone 3G, Nexus One and an ordinary USB flash drive.
However a Samsung Galaxy S it does want to recognize. It says first USB LOAD and later UNSUPPORTED on the display.
I have tried several methods on the phone after USB is plugged in: click on home button after MTP connect screen appears, put USB in debug mode and choose to connect drive after USB dialog appears.
Does not work with and without external SD.
Is it the MTP background process that bothers the car radio?
Or it does not support drives which are partioned into several filesystems. The first filesystem is FAT32. But why the Nexus One is supported?
Any clues are very welcome!
Click to expand...
Click to collapse
Please see my solution if you have an "Aux" input.
thedarkpassenger said:
i have the same problem with my 2009 Civic Si
I tried all of the usb modes, with debugging on and off for each. still no luck.
Click to expand...
Click to collapse
Please see my solution. I used to have an 2009 Civic Si (Dyno Blue Pearl and it was stolen ) Now I have an 2010 LX because I couldn't find a replacement in SoCal.
Pititul said:
I have the same problem on Honda stereo... Is it possible to update the care stereo itself? Maybe someone could develope this into a ROM?
Click to expand...
Click to collapse
Please see my solution.
If you buy the equipment from Best Buy, you can always return it.
promet, in theory that won't have the same audio quality as connecting the car stereo to the SGS via USB as a USB storage device.
this is a solution i got working on pretty much all types of car stereos
http://www.samsunggalaxysforum.com/hardware-problems/hooking-up-galaxy-s-to-car-radio-via-usb/
Patersr03 said:
this is a solution i got working on pretty much all types of car stereos
http://www.samsunggalaxysforum.com/hardware-problems/hooking-up-galaxy-s-to-car-radio-via-usb/
Click to expand...
Click to collapse
Unfortunately this did not work with my AVH-5200bt . It charged, but wouldn't mount!
Anyone have another possible solution? Pretty much the only use I have for my ipod is hooking it up to my stereo lol.
Hey all,
I've been having the same problem on my Samsung Galaxy II LTE (almost identical to the "Skyrocket" from AT&T) in my 2010 Honda Civic USB.
For what it's worth, I've managed to get it at least partially working.
I used "Multi Mount SD-Card" (you can find it in Android Market/Google Play, requires root unfortunately) and tried enabling only one SD card to be mounted at a time.
For whatever reason, it works fine if I only share the the internal storage, but not if I share my 32GB external card. Both music folders are identical, so I don't know if it has a problem with the card being used, the size of it, or if I need to low-level format it, etc (hence another round of troubleshooting next week).
So, I've sorta gotten it working, but not the way I want it to be working. I hope this helps someone.
bitemark01 said:
Hey all,
I've been having the same problem on my Samsung Galaxy II LTE (almost identical to the "Skyrocket" from AT&T) in my 2010 Honda Civic USB.
For what it's worth, I've managed to get it at least partially working.
I used "Multi Mount SD-Card" (you can find it in Android Market/Google Play, requires root unfortunately) and tried enabling only one SD card to be mounted at a time.
For whatever reason, it works fine if I only share the the internal storage, but not if I share my 32GB external card. Both music folders are identical, so I don't know if it has a problem with the card being used, the size of it, or if I need to low-level format it, etc (hence another round of troubleshooting next week).
So, I've sorta gotten it working, but not the way I want it to be working. I hope this helps someone.
Click to expand...
Click to collapse
Any news on this? Thanks!
I got LG stylo and sumsong Galxy s3 could not get my car Bluetooth to work and neither the usb any help
I am having issues with the activation of USB Mass Storage mode on CM7 v7.10. When I first connected my nook (just got it yesterday), I was able to enable mass storage mode as per normal. However, after this it's just stopped working!
There's nothing wrong with the cable afaics because the empty drives come up on the PC (Win7) no problem, it's just that the nook doesn't detect that the USB is plugged in and so never gives me the option to enable Mass Storage mode. I have had success once running ROM Manager's 'Fix Permissions' function, but since then it's not made any differences. The issue remains on multiple PCs with multiple cables.
Anyone got any fixes for this issue?
+ can you wiggle the micro-usb end a bit to see if anything better?
+ do you have the "usb debugging" check?
+ do you see the usb icon displayed on the NC notification bar?
- No wiggling makes any difference
- Tried with USB debugging on and off - no difference
- No USB icon (but empty drives still show up on my PC) so there is some kind of connection going on.
If the empty drives do show up on the PC, it definitely some sorts of connection made, it's a good sign.
Now back on your NC, go into Storage, try to Unmount then Remount the uSD and see if it gets any going.
Note: leave the Debugging USB Mode on.
Might also be worth considering moving from 7.1 to the MiRaGe 7.2 build. I'm not saying there is a specific fix but using the later ROM may help and I think most people find it more stable, faster and problem free.
Yeah, I actually updated to KANG 7.2 this avo and the USB Mass Storage option is back!
Thanks everyone for your suggestions!
I currently having KANG Mirage 7.2 with Tablet Tweak but it did not work. I bought an OTG cable from ebay so I assumed it's bc the OTG cable. The Drive works fine on my laptop but nothing appears on the Nook.
Maybe a re-flash with the same ROM might do the trick?
I'll try to reflash sometime soon!
Will post
uSB mass storage
I had the same issue. Have the USB connected and while connected reboot your device once it has rebooted you'll be able to access the USB files on your device. You'll be able to see the USB signal at the bottom, which you can activate. You'll have to do this most likely everytime you want to access USB storage
tinydog13 said:
I had the same issue. Have the USB connected and while connected reboot your device once it has rebooted you'll be able to access the USB files on your device. You'll be able to see the USB signal at the bottom, which you can activate. You'll have to do this most likely everytime you want to access USB storage
Click to expand...
Click to collapse
I tried it this morning but it nothing appeared to work.
tinydog13 said:
I had the same issue. Have the USB connected and while connected reboot your device once it has rebooted you'll be able to access the USB files on your device. You'll be able to see the USB signal at the bottom, which you can activate. You'll have to do this most likely everytime you want to access USB storage
Click to expand...
Click to collapse
I'm on MIRAGE 7.2 running off EMMC. SD card is in the Nook.
I shut nook off, plugged in the cable to my pc and started the nook.
5 drives show up but I cannot access any of them. The USB icon is in the tray on the Nook and it says "USB connected". Just above that it says, "USB debugging connected"
Anybody have any success?
After doing some reading I've decided to use ES-FILE Explorer wirelessly. Its very easy to use. You need to SHARE folders on your PC in order for it to access the files.
Playing around with the USB option some more, I didn't realize that you could TOUCH the message in the notification bar. When you do, it launches a program and from there, you turn the USB connection on or off.
Geeeeeeez........ya learn something new every day.
Hi,
I am facing the following 2 issues with my Xperia T when using it in the car:
1. I have an USB port in the car that I could use in the past with the Arc for charging the phone and sometimes even for playing music from SD card instead of bluetooth. When I plugged the T I got "Unrecgnized device" message from the car and I cannot charge the phone nor play music/browse from the usb port. Is this because the special port Xperia T is having? is there any solution to this (I just want to charge the phone and I don't want to use a converter from the car lighter)
2. When connected via bluetooth I can easily play music/jump to next song, pause, call, answer calls from the car controls but sometimes when I reconnect the phone player is paused and I cannot resume (only if I play from phone). Also when browsing through the songs, sometimes the name of the song/artist is not changed in the car player. Have you tried this? Do you have such issues? With the Arc was working perfect (I had Apolo player and Jely bean already)
Thanks,
Mugur
http://mugur-ionescu.ro/tag/xperia
It might because the phone is in MTP mode by default. Try changing it to mass storage mode in Settings, Xperia and see if that fixes the charging issue. Grasping at straws but it might work and you might be able to access your music that way too if supported by your stereo.
(Music access with mass storage mode works for me on my fathers car.)
emuX said:
It might because the phone is in MTP mode by default. Try changing it to mass storage mode in Settings, Xperia and see if that fixes the charging issue. Grasping at straws but it might work and you might be able to access your music that way too if supported by your stereo.
(Music access with mass storage mode works for me on my fathers car.)
Click to expand...
Click to collapse
It worked!! Thanks
Just got my Moto X4 and it won't connect to my car stereo via USB like it should. Bluetooth works just fine for the most part (it does blank out for a few seconds every once in a while), but I want to connect to AppRadio on my car stereo for better sound and functionality.
I have a Pioneer AVH X3800BHS stereo in my car that has an AppRadio mode that I'm trying to connect to through USB, but the phone has to be in MTP mode. I'm able to click USB settings and see the option for MTP, press that and the phone automatically talks to the car stereo for a second and launches the AppRadio app but then immediately reverts back to charging only mode.
Is there any way to force the phone to stay in MTP mode, or does anyone have any thoughts on what's wrong? I have seen that a lot of people have had issues connecting to Android Auto, so I wonder if the same issue is causing this.
Stuff I've tried:
different USB cables
USB debugging on/off (restarted phone after changing)
Uninstall/re-install AppRadio app
in developer settings- changing Select USB Configuration setting to MTP, PTP, RNDIS, Audio Source (i've tried all the options just to see if would work.. it didn't)
swearing at the phone
turning Bluetooth off
resetting car stereo
turning off fingerprint login
activating car stereo as trusted device
Btw, the phone connects to my PC just fine and stays in MTP mode.
I can't think of anything else to try unless there's a way to force the phone into MTP and somehow make it stay there!
Is this just not going to work until possibly the Pi update? I've thought about rooting and trying another ROM but would prefer to keep the phone stock at least for a while.