Database Develop

Is it possible to retain root with The 77.12.22 update using Voodoo OTA

Or using the "1. root, 2. use ota to backup, 3.temp unroot, 4. restore root, and 5. flash jb" method? I dont want to update to the cheesecake leak...but I do want the 77.12.22 OTA update. Is it possible to use the cheesecake method to retain root on this OTA update?

Junior-J said:
Or using the "1. root, 2. use ota to backup, 3.temp unroot, 4. restore root, and 5. flash jb" method? I dont want to update to the cheesecake leak...but I do want the 77.12.22 OTA update. Is it possible to use the cheesecake method to retain root on this OTA update?
Click to expand...
Click to collapse
Wrong section. Has been answered more than once. Yes you can retain root, but you need to read through the threads to find out how.

I too have been looking for this...
I probably took longer to type the "wrong forum" comment, then to actually help someone out.
I searched as well, and the only guide I could find is for the JB Leak...
Can anybody provide a step by step for going to 77.12.22.MB886.ATT.en.US from rooted shipped and retaining root?

mattpall said:
I probably took longer to type the "wrong forum" comment, then to actually help someone out.
I searched as well, and the only guide I could find is for the JB Leak...
Can anybody provide a step by step for going to 77.12.22.MB886.ATT.en.US from rooted shipped and retaining root?
Click to expand...
Click to collapse
I just used the atrix hd utility and then rerooted.

mattpall said:
I probably took longer to type the "wrong forum" comment, then to actually help someone out.
I searched as well, and the only guide I could find is for the JB Leak...
Can anybody provide a step by step for going to 77.12.22.MB886.ATT.en.US from rooted shipped and retaining root?
Click to expand...
Click to collapse
It probably didn't take longer. I also did help him out by telling him that you could retain root. Also I was not even being rude about it, I was just pointing out that it is much easier for everyone to look for answers before asking questions.

Edit: Sorry friend, I thought you were talking about JB leak. This method should work anyway though, if it does't, bleh.
....ahem.
Before you flash JB leak, make sure Superuser app AND Su binary are both fully updated. Current version of Su bin is 3.1.X. After that, use OTA Rootkeeper like normal.
So,
1 Root ICS
2 Update Superuser
3 Update Su
4 Protect root with Rootkeeper
5 Temp Unroot
6 Flash JB
7 Restore Root
8 Profit

[ROOT][System R/W Enabling] 4.4 (System Version 19.5.3 ONLY)

DISCLAIMER: I AM NOT RESPONSIBLE IF YOUR PHONE GROWS LEGS AND EATS YOUR DOG, YOUR LOVE LIFE IS DESTROYED, YOUR PET ROCK GOES MISSING OR ANYTHING ALONG ANY LINES REGARDING YOU, YOUR FAMILY, YOUR PHONE, OR ANYTHING FOR THAT MATTER.
------------------------------------------------------------------------------------------------------------------------------------------------------------
Now that we have gotten that out of the way on to the root.
I will tell you now this is a LONG grueling process not meant for most new comers but if you want to take a stab feel free ill help if need be.
Now first things first before we do ANYTHING make sure your using a Droid Maxx, Droid Ultra, Moto X or any of those phones and make sure their on System version: 19.5.3 and Android: 4.4. Now that we've separated the men from the women (no sexism implied) lets move on.
You now need to go into your settings and make sure you have developer options available if not go to about phone in settings and scroll down and tap build number till it tells you your a developer. Pretty straight forward and simple. Now go back and go into developer options and enable USB Debugging and plug your phone into your PC (don't forget you need a computer for this process). Now it will most likely prompt you to authorize your pc on your device. Tap the check box and tap OK.
Now I need you to do a couple of things. Make sure you don't have an update pending, make sure your battery is charged, and make sure you have no root apps installed, this is almost specifically pointed at SuperSu, Superuser, etc. This will ensure your safe to do this whole process error free (not guaranteed but almost positive it prevents all your problems).
Now that we've separated the boys from the men lets continue.
Your going to want to download the file below ROOT.zip. That is the file with all the goodies. Download it and extract it to your C drive (root directory).
Go to the ROOT/PIE folder and run the ROOT.bat it will direct you from there. If you want me to paste what it says here, well then here you go-->
First it will say​
--Root Achived--
Click to expand...
Click to collapse
Now you'll need to follow the other directions it gives you.​
Please run wpbegone.exe in /ROOT/RWPD/ as administrator-------------------------
-----------------------------------------------------------------------------------------------------
Press Enter when you've done so and its made you say yes a couple of times----
Click to expand...
Click to collapse
This is somewhat what it will look like. Do what it says and it will say the next thing.​
Please click ONCE on 1.bat and hold Enter once it says waiting for adb-----------
Once its rerooted your device with pie and has said must play a little while--------
longer please wait till it goes through the process and gets to clobbering 2--------
Then click 2.bat ONCE and press and hold enter till it roots your device-----------
After your rooted wait till all is completed and it tells you to press enter------------
Then reroot your device using pie and go to the safestrap app now in your app-
drawer and tap install recovery. Then reboot into recovery using safestrap-------
and install su.zip on your sdcard/internalstorage and reboot-------------------------
After all of that go to SuperSu and update your binary--------------------------------
now your done PROFIT B**** ;D
Click to expand...
Click to collapse
Follow those instructions to the tee or it will NOT work.​If you need urgent help email me at [email protected] if not just post on here and ill get back to you asap i am a busy person and may be living on the streets soon so please don't be a d*** to me. Be patient.
Credits:
Credits for Pie go to jcase
Credits for MotoWpNoMo (wpbegone.exe) go to beaups
Credits for the batch files go to Muah (ME)
Credits for the time and effort put into all of this go maily to jcase,beaups, and somewhat myself.
Download Section:
Mod edit

Is this root tethered or is it all untethered and just full on root for 4.4?

Jay_P11 said:
Is this root tethered or is it all untethered and just full on root for 4.4?
Click to expand...
Click to collapse
Its full unthethered root on 4.4. You just have to downgrade from 19.6.3 system version to the 19.5.3 system version if your not already on it.

Why are you reposting and repackaging devs' exploits. This is essentially a repost and repackage. Not sure @jcase or @beaups would approve of this.

Topsnake said:
Why are you reposting and repackaging devs' exploits. This is essentially a repost and repackage not sure @jcase or @beaups would approve of this.
Click to expand...
Click to collapse
Your right neither of us would, this behavior is why I'm toning down my public work.

jcase said:
Your right neither of us would, this behavior is why I'm toning down my public work.
Click to expand...
Click to collapse
And that is sad to hear @jcase but I understand and have followed your lead with my work ( granted it is MUCH LESS than yours).
Know that some of us such as @samwathegreat @SamuriHL @bigv5150 @caseky621 and myself do appreciate your work and understand the frustration you must feel when someone does this.
---------- Post added at 02:40 PM ---------- Previous post was at 02:36 PM ----------
[/COLOR @jcase anyway we cant get a lock for this thread and the one linked below for repost?
http://forum.xda-developers.com/showthread.php?t=2849171

Repost
While all guides and tutorials are highly appreciated, reposting them is highly unnecessary and will only be confusing for people trying to find the right guide. Pie root by Jcase can be found here, and as his thread states:
Pie is a root for motorola devices, should work up to and including 4.4.2.
Click to expand...
Click to collapse
Meaning it also works on the Droid Ultra or any Motorola device for that matter.
Link removed & thread closed

[Q] KingRoot can ROOT turbo ?

who can tell me how to kingroot..
I kingroot failed..

Nooooooooo！it can't.
这软件是中国骗子公司出的烂东西，别信。
don't understand?use - https://translate.google.com/

Then try again, roots for me the first time all the time.

Temp root only.

Technogen said:
Temp root only.
Click to expand...
Click to collapse
I don't care temp root..
Ijust want root..
I need Titanium Backup..

a8365523 said:
I don't care temp root..
Ijust want root..
I need Titanium Backup..
Click to expand...
Click to collapse
Don't hold your breath there, pal....

Then you will want to spend $20 and get Moforoot, however there is a good chance it will not work under lollipop when they push out the update.

With Kingroot, i rooted my limited edition 1254 the second time i tried, but it resulted in a lot of pop ups, showing android system apps crashes..the only way out was hard reboot.
Better off wait for OTA update, then a few chances for devs in finding exploits,and hopefully removing write protection..the real iceberg so far..

[email protected] said:
With Kingroot, i rooted my limited edition 1254 the second time i tried, but it resulted in a lot of pop ups, showing android system apps crashes..the only way out was hard reboot.
Better off wait for OTA update, then a few chances for devs in finding exploits,and hopefully removing write protection..the real iceberg so far..
Click to expand...
Click to collapse
Mine did the same thing

Used kingroot and it worked seamlessly on HTC m8 to place GPE ROM via twrp , so idk about the softroot ...

a8365523 said:
I don't care temp root..
Ijust want root..
I need Titanium Backup..
Click to expand...
Click to collapse
It works & Ti too
http://forum.xda-developers.com/droid-ultra/general/root-kingroot-4-4-4-su-6-7-t3117552

Need Root

guy's i want to asking you
i have Galaxy S5-SMG900A AT&T
Android version 6.0.1 update via OTA at that time Baseband : G900AUCU4DPH2
The phone not ROOt yet
how to install cover recovery like TWRP,CMM and busybox can you teach me step by step do install that Thank you guy's.

yes

hardwellmouad said:
guy's i want to asking you
i have Galaxy S5-SMG900A AT&T
Android version 6.0.1 update via OTA at that time Baseband : G900AUCU4DPH2
The phone not ROOt yet
how to install cover recovery like TWRP,CMM and busybox can you teach me step by step do install that Thank you guy's.
Click to expand...
Click to collapse
If this is your question, then you are probably not ready to root just yet, anyway. You should always research before rooting anything. A lack of doing research before rooting any phone is good way to brick phones. A simple search will easily answer your question(s) about rooting this phone.

How to root the AT&T Galaxy S5 Marshmellow
Step 1. Stop Creating posts about the same topic
Step 2. Stop creating topics about anything without searching first
Step 3. Get a phone that can be rooted
Step 4. No stop. This phone can't be rooted for the forseeable future and much development interest in it has died.
Step 5. Go back to step 3

QuillOmega0 said:
How to root the AT&T Galaxy S5 Marshmellow
Step 1. Stop Creating posts about the same topic
Step 2. Stop creating topics about anything without searching first
Step 3. Get a phone that can be rooted
Step 4. No stop. This phone can't be rooted for the forseeable future and much development interest in it has died.
Step 5. Go back to step 3
Click to expand...
Click to collapse
I DONT SAY HELP ME TO YOU AND WHAT YOUR PROBLEM WITH ME WTF !! IF YOU DONT WANT TO HELP ME OR YOU WANT TO INSULT ME JUST EXIT THIS TOPIC

The issue is that you have a couple topics on how to root this phone, if it has lollipop or marshmallow, it can not be rooted. Searching for this instead of creating 2 posts about it would have prevented the sarcastic answer. This phone is old and developers have moved on to newer phones.

hardwellmouad said:
guy's i want to asking you
i have Galaxy S5-SMG900A AT&T
Android version 6.0.1 update via OTA at that time Baseband : G900AUCU4DPH2
The phone not ROOt yet
how to install cover recovery like TWRP,CMM and busybox can you teach me step by step do install that Thank you guy's.
Click to expand...
Click to collapse
THREAD CLOSED
1. Search before posting.
Use one of our search functions before posting or creating a new thread. Whether you have a question or just something new to share, it's very likely that someone has already asked that question or shared that news.
Click to expand...
Click to collapse
5. Create a thread or post a message only once.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
Click to expand...
Click to collapse

Request for Root on NWS2.170620.003 Security Patch level July 1, 2017

hi,
i am new in these forums,
i searched over the web and also tried many root methods, but none worked.
root method for NXH19X is not working for me i tried multiple times.
the main error i am getting is "unable to mount /system; no such thing found" in TWRP
i also tried multiple Supersu files official ones and unofficial ones as well.
after some research i found out about new file system squashfs FS
then i tried this rom which supports EXT4 File System
here is link: https://forum.xda-developers.com/g-watch-r/development/rom-ext4all-g-watch-r-skin1980-t3589917
but it didnot work out as well,(get boot looped)
so flashed stock rom and now on latest update as told earlier,
so its my request, i need help. if someone please come up with any working method to root latest stock rom and security patches(build number and security patch in title)
why stock rom?
i personally like stock rom and it is working fine for me.
why root?
i have root on my phone (one plus one), i felt like i am unable to use my watch on full potential without root.
and we all like root that's why we are here right
thank you
(i actually don't know the how to write any threads so bear with me please) :fingers-crossed:

This post of mine will work. Tried on many roms and it works.
Some play store apps says i dont have root but I do as the app i use that needs root works : https://play.google.com/store/apps/details?id=com.skin1980.buttonremap
So use this procedure :
https://forum.xda-developers.com/g-watch-r/development/nxh19x-boot-img-rooted-t3651039
The problem is that u need a TWRP for squash images which you can find in the mentioned post

Grumps said:
This post of mine will work. Tried on many roms and it works.
Some play store apps says i dont have root but I do as the app i use that needs root works : https://play.google.com/store/apps/details?id=com.skin1980.buttonremap
So use this procedure :
https://forum.xda-developers.com/g-watch-r/development/nxh19x-boot-img-rooted-t3651039
The problem is that u need a TWRP for squash images which you can find in the mentioned post
Click to expand...
Click to collapse
hi
i tried your given method,
twrp seems to work fine first time,
but i lost twrp as soon as i boot into system,
some how system replace recovery with default one each time watch booted into android itself,
however i am able to boot into recovery, when tried directly from fast-boot after flashing it,
but still unable to obtain root,
the zip files seems to flash perfectly, but there is no su in app drawer,
thanks for your support, but i think new version makes it harder to gain root,
and i am fine without root i can live without it.
thanks again.

Talwinder8872 said:
hi
i tried your given method,
twrp seems to work fine first time,
but i lost twrp as soon as i boot into system,
some how system replace recovery with default one each time watch booted into android itself,
however i am able to boot into recovery, when tried directly from fast-boot after flashing it,
but still unable to obtain root,
the zip files seems to flash perfectly, but there is no su in app drawer,
thanks for your support, but i think new version makes it harder to gain root,
and i am fine without root i can live without it.
thanks again.
Click to expand...
Click to collapse
There is no SuperUser for android wear watches. It will automatically allow root access for all apps that request it...

Grumps said:
There is no SuperUser for android wear watches. It will automatically allow root access for all apps that request it...
Click to expand...
Click to collapse
ok i see, but how to confirm, it is rooted because i don't want to purchase that 'Button Re-Mapper App', before confirming,

Talwinder8872 said:
ok i see, but how to confirm, it is rooted because i don't want to purchase that 'Button Re-Mapper App', before confirming,
Click to expand...
Click to collapse
ok boom , i got it ,
i am such a noob, didn't bother to check it with root check now we are good to go, cool
thanks a million guys :good: :good:
ok i don't know how to attach screen shot,

Talwinder8872 said:
ok boom , i got it ,
i am such a noob, didn't bother to check it with root check now we are good to go, cool
thanks a million guys :good: :good:
ok i don't know how to attach screen shot,
Click to expand...
Click to collapse
Dont worry be believe you haha