Database Develop

Otterbox Commuter Series quick/dirty review

I'll do a more detailed review tonight and switch out the photos with better ones too.
First impressions: Holy crap this is huge!
It is very reminiscent of the commuter series for the HTC Hero (of course). However, this one feels a bit more "rugged".
The case has the standard plugs for the headphones and microusb ports. It also has the raised areas for the volume rocker and on/off button. The front is well protected and thick enough to not really have to worry about placing the phone face down.
It was much easier to attach than the Sedio Innocase! And conversely, it's a PAIN to remove (which is a good thing!)
It takes about the same amount of force to slide open the keyboard. It's borderline too hard for me.
Oh, the keyboard lights aren't completely covered either! Granted you still can't see them looking directly down at the phone, you can see them if you tilt the phone back a little.
My initial qualms are:
1) The case is slightly too long for the phone. The top of the case that is around the keyboard is loose. Not just a little, but it looks like it wasn't even meant for this phone.
2) Like the mini-usb plug on the Hero's commuter series, the micro-usb plug on the Shift's commuter series doesn't want to stay in.
3) Since the back side is beveled and it's semi-hard to slide out, it sometimes takes a couple tries because it keeps slipping out of my hands.
Nit-picks:
1) Backside cover is off-center (flash/camera/speaker aren't centered in their respective cutouts)
2) No silicone on the front so when it's face down it slides around easily (compared to the hero which had silicone bumpers on the front)

Where did you get it from? Still says preorder on my end
Sent from my MiuiSpeedy with that Premium XDA App

just ordered mine, hope its protective. It feels good to raw dog, but its dangerous.

Rooster85 said:
Where did you get it from? Still says preorder on my end
Sent from my MiuiSpeedy with that Premium XDA App
Click to expand...
Click to collapse
Otterbox.com EVO Shift 4G Commuter Series

southernstyle said:
just ordered mine, hope its protective. It feels good to raw dog, but its dangerous.
Click to expand...
Click to collapse
It's does a very good job of covering up the phone and not being loose.

Got mine today, as wizputer noted the mini-usb isn't snug enough to remain in the port. Otherwise, very impressed with the design and construction of the case.

got mine in today, very pleased. although it was a little bit of a b*^&h to put on. After getting it on I noticed the usb plug being a pain, and the power button seems to need a lil extra force to actually click, but other than that love it. I feel safe now

Good review, disappointed, love my Otterbox's for my EVO and HD2. The split covers though, Shift and Tilt (from experience), just do not seem to provide the same kind of coverage but I do not know what else they could do to make them better.

nativ73 said:
Got mine today, as wizputer noted the mini-usb isn't snug enough to remain in the port. Otherwise, very impressed with the design and construction of the case.
Click to expand...
Click to collapse
I ended up cutting my usb plug off because of the headache it was causing.
Sent from my MiuiSpeedy

Rooster85 said:
I ended up cutting my usb plug off because of the headache it was causing.
Sent from my MiuiSpeedy
Click to expand...
Click to collapse
Actually you just have to know how to make it stay there's a little trick to it when you close it. You have to kinda pull the thing up a little bit and then slide it in and stays. That's how mine works anyways ..

kbrn said:
Actually you just have to know how to make it stay there's a little trick to it when you close it. You have to kinda pull the thing up a little bit and then slide it in and stays. That's how mine works anyways ..
Click to expand...
Click to collapse
Oh well, too late. The microusb doesn't need to be covered really anyways
Sent from my MiuiSpeedy

I just always wiggle the flap into the port, best case by far would definately recomend. ORDER FROM OTTERBOXS WEBSITE, when it first came out I tried it from amazon (it was $10 less) but the expected shipping date was in june.
No I'm not using Tapatalk... I'm using the XDA Premium app, cause I got balls.

Be careful with the otterbox guys, dropped mine for the first time today and 3 of the 4 clips to hold the back on broke, making the case absolutely useless..... waste of 30 bucks!
Sent from my MiuiSpeedy

When. That happens call otterbox and they will no auestions asked replace it usually takes 1week shipping I've had 5 so fardo this and most recently they sent me 2x so I don't need to calll next timeill. Be prepared...love this company
Sent from my PG06100 using xda premium

+1 to that . They have like you said Replaced mine about 4x's. Never once asked for anything but my address. Best company ever . Have since bought Otter Boxes for all my Devices.

I got this case mid August, and about a week ago, I dropped it. While in free fall, the top of the case just fell off my phone and broke in half. Sad thing is, I dropped it from about 2 feet. But yes, I called it in, and they are sending me in another, just have to watch out for my phone a bit more! (At least I get to replace the screen protector, put it on kinda bad, XP

[Open Thread] Thoughts On Otterbox Case For EVO Shift 4G

So I just wanted to start a thread for myself and anyone else who may want to read it
Basically anyone who has an otterbox case for the evo shift or has seen/used it or whatever just leave your opinions/reviews whatever. I am thinking of buying one so just wondering

I don't have one for the Shift but I've used an Otterbox on other devices and would recommend it if you have the slightest fear of damaging your handset.
I believe the last one I used was a Commuter which completely encased the handset and seemed to be able to take a hit. The back was too smooth for me so I had a little trouble re-learning how to hold it and the thickness of the handset increased significantly but overall it felt safe. Worth the extra money.

I am using the otterbox commuter case on my shift right now. I like it a lot. The fit and finish seems like it is completely a part of the phone. Only two complaints are:
1. If I try to move an icon from one hone screen to another, the piece covering the screen makes it difficult to move it to the "edge" - not a big deal, you learn to adjust.
2. When opening the slider, I hear a click sound, sounding like the little tabs holding the upper piece on are catching as it moves. Again, kinda not picky.
All in all, I think it is a great case and makes me worry a lot less about dropping my device. I would definitely recommend it.
Sent from my PG06100 using XDA App

Awesome seems like ill want to pick it up. I recently cracked the screen on my shift and made a few scuff marks so that's what seriously turned me to getting the case.

notsointeresting said:
Awesome seems like ill want to pick it up. I recently cracked the screen on my shift and made a few scuff marks so that's what seriously turned me to getting the case.
Click to expand...
Click to collapse
Tip for putting on the included screen protector...patience and a clean work surface! I couldn't get it to work well at first, then I ended up dropping it on the carpet. I was ready to give up on it until my wife took it from me and got it to work. So...if you have the patience of an ADHD kid on meth like I do...lol. It was my first screen protector too so. Anyways have fun!
Sent from my PG06100 using XDA App

definitely worth getting. i have the commuter series otterbox and it makes my phone look and feel like a beast. only thing that annoys me sometimes is the dust/lint that gets stuck to the rubber on the case, but i just blow it off.

zeke803 said:
2. When opening the slider, I hear a click sound, sounding like the little tabs holding the upper piece on are catching as it moves. Again, kinda not picky.
Click to expand...
Click to collapse
I haven't had a problem opening the slider at all.
I have one and love it! Top of the line case, looks good feels good and protects good! I would totally recommend it to anyone with a Shift!..

I use it on my shift, and have had them on two other phones. Like everyone else said, its a great case, and really does look like a part of the phone.
Sent from my PG06100 using Tapatalk

I'm now on my second otterbox after a free factory replacement, my only nit pics are the usb port cover doesn't stay closed, and it clicks everytime I open it, feels like one of the clips is catching....
Sent from my MiuiSpeedy

Just got the Commuter series and I'm a fan so far. Makes the phone feel more substantial and gives a better grip. The only issue was with the headphone and USB port covers, which didn't stay down. I just removed them, but DON'T Rip them off, it'll tear the rubber casing. Found that out on the USB port one so I cut the headphone one off. Either way makes the rubber a little loose around the port but not hugely annoying unless you're a perfectionist(which I can be). I'll just apply a little glue and seat it on the plastic frame.
Sent from my PG06100 using XDA App

Thanks for the answers guys! I'm definently going to pick one up in a couple days.
I do want to keep this thread open just so anyone can ask questions/leave other reviews for other people.

notsointeresting said:
Thanks for the answers guys! I'm definently going to pick one up in a couple days.
I do want to keep this thread open just so anyone can ask questions/leave other reviews for other people.
Click to expand...
Click to collapse
Got the Otter Box Commuter of Ebay for 24.97 free shipping. in retail box

wcherin said:
Got the Otter Box Commuter of Ebay for 24.97 free shipping. in retail box
Click to expand...
Click to collapse
That's great. The retail price from otterbox.com is $35 so thats a great buy. There's just something about ebay that I can't trust lol. That's me and my paranoia tho.

notsointeresting said:
That's great. The retail price from otterbox.com is $35 so thats a great buy. There's just something about ebay that I can't trust lol. That's me and my paranoia tho.
Click to expand...
Click to collapse
Check also Amazon I got mine for about the same price .. 20 something and It's safer than eBay (for me it is)

kbrn said:
Check also Amazon I got mine for about the same price .. 20 something and It's safer than eBay (for me it is)
Click to expand...
Click to collapse
Wow I found one for 22 on amazon thanks for the tip man

Once you have the front plate on the phone. How the hell do you get it off????
Sent from my HTC Sensation 4G

Xx12thANG3LxX said:
Once you have the front plate on the phone. How the hell do you get it off????
Sent from my HTC Sensation 4G
Click to expand...
Click to collapse
Its almost inpossible without breaking the case. I broke one of the clips in the process..... thank goodness for a warranty!
Sent from my MiuiSpeedy

Rooster85 said:
Its almost inpossible without breaking the case. I broke one of the clips in the process..... thank goodness for a warranty!
Sent from my MiuiSpeedy
Click to expand...
Click to collapse
I guess that's not technically a bad thing if the fronts hard to get off.
I just hope the back isn't the same when I get mine.
Is it?

notsointeresting said:
I guess that's not technically a bad thing if the fronts hard to get off.
I just hope the back isn't the same when I get mine.
Is it?
Click to expand...
Click to collapse
Nope I can confirm that, being really careful you can take the back without any problem..
I Think that the front parts being hard to take off it's a good thing.

Had mine for 2 or 3 months now
Bought it from Amazon for like $25 when they finally came available for the shift and had to wait a month before I got it in hand.
I'm not as impressed as i would be with the protection if it was a defender case. I had the black case with fake carbon fiber and belt clip before. The otterbox commuter is better then that one, by how much I'm not sure.
I dropped my phone about a month ago. I don't know if it just hit the right place of the case, and the back case came flying off the phone, the side clips where busted off, so the back case would not stay on any more.
I decided to call up otterbox and see if it was under warr. and if they would replace it. AMAZINGLY they said YES so they shipped me a new one for free i didn't even have to pay shipping. NICE. It was quick and easy I thought that was soooo cool. Because of that i will continue to buy otterbox, and recommend them to others.
In future i hope to buy defender cases (better protection) which means no more slider phones which i think i am ready for now that touch screens are so much better. All my old phones have been sliders with full keyboards from back in the day with my old HTC t-mobile MDA, which made me find this site.
Thats my 2 cents.

Best Case *SO FAR* :)

After trying several cases for my Nexus 7, knowing there aren't any specifically for the Nexus 7 at any retail stores, this was the best one I've come across. It will hold me over until an official case comes out (I've kept the receipt so I can return it). I just can't have such an awesome piece of tech sitting around without a case and without the ability to use it as a stand for viewing. The leather is genuine and the case is simply gorgeous. I love the way if holds the tablet without the clamps/rubberized holding mechanism actually rubbing or touching the bezel. All ports are accessible while it is in the case and the power/volume buttons are very easily accessible.
Found it at Fry's this morning on the way to work but it will set you back $59.99. One of the best portfolio stand cases I've ever owned for any of my devices. High end.
http://www.frys.com/product/7190052?site=sr:SEARCH:MAIN_RSLT_PG
Here are some pictures I just took of it from various angles.

iamsupreme said:
After trying several cases for my Nexus 7, knowing there aren't any specifically for the Nexus 7 at any retail stores, this was the best one I've come across. It will hold me over until an official case comes out (I've kept the receipt so I can return it). I just can't have such an awesome piece of tech sitting around without a case and without the ability to use it as a stand for viewing. The leather is genuine and the case is simply gorgeous. I love the way if holds the tablet without the clamps/rubberized holding mechanism actually rubbing or touching the bezel. All ports are accessible while it is in the case and the power/volume buttons are very easily accessible.
Found it at Fry's this morning on the way to work but it will set you back $59.99. One of the best portfolio stand cases I've ever owned for any of my devices. High end.
http://www.frys.com/product/7190052?site=sr:SEARCH:MAIN_RSLT_PG
Here are some pictures I just took of it from various angles.
Click to expand...
Click to collapse
Nice! Any negatives that you can tell aside from price?

brianbrain said:
Nice! Any negatives that you can tell aside from price?
Click to expand...
Click to collapse
None, which is hard to say about most cases. I've always had something I've disliked about a case but have dealt with it. I've also always went for the cheaper the better in the past. This case is truly a "you get what you pay for" case. The way it holds the very edges of the tablet is my favorite part. It looks like it is floating in the case and the parts that hold the tablet in place never really become part of the view. The access to all buttons and inputs as well as the quality of the leather are great. The actual stand aspect allows for infinite viewing angles and never feels cheap, like the stand portion is going to collapse at any moment.

This case looks really nice. I personally want a colored case though and not the standard brown/black. Also, I'd rather pay a bit more for a case that I really like and thats going to last me a while then buy a cheap case that I'm not that into, deciding that Im not satisfied with it and having to buy more. So if I see something that I fall in love with then I don't mind pulling the trigger as long as its not 100+

iamsupreme said:
None, which is hard to say about most cases. I've always had something I've disliked about a case but have dealt with it. I've also always went for the cheaper the better in the past. This case is truly a "you get what you pay for" case. The way it holds the very edges of the tablet is my favorite part. It looks like it is floating in the case and the parts that hold the tablet in place never really become part of the view. The access to all buttons and inputs as well as the quality of the leather are great. The actual stand aspect allows for infinite viewing angles and never feels cheap, like the stand portion is going to collapse at any moment.
Click to expand...
Click to collapse
Nice. It fits perfectly? Usually cases with the plastic clips are pretty picky about what they'll work with. If so, I'm thinking about buying one of these gtab 2 7.0 cases and adding a "smart cover" magnet to it.

brianbrain said:
Nice. It fits perfectly? Usually cases with the plastic clips are pretty picky about what they'll work with. If so, I'm thinking about buying one of these gtab 2 7.0 cases and adding a "smart cover" magnet to it.
Click to expand...
Click to collapse
Here's how well it fits Very securely! I'm actually shaking the case while I hold it upside down. Talk about making your heart jump a bit!

are you sure? I tried the same case and it doesn't fit too well, but its the best one
the corners are still lodged

iamsupreme said:
Here's how well it fits Very securely! I'm actually shaking the case while I hold it upside down. Talk about making your heart jump a bit!
Click to expand...
Click to collapse
haha, very nice. I may have to see how some of the gtab 2 7.0 cases fit myself. Nice to see you also brought your new baby to work with you today :good:

darthchilli said:
are you sure? I tried the same case and it doesn't fit too well, but its the best one
the corners are still lodged
Click to expand...
Click to collapse
I just pulled the edges on the 4 rubber ends out slightly, if that makes sense, and when the tablet was in place, they wrapped perfectly around each corner of the tablet. It takes a tiny bit of "fitting", but once it's on, it's all good.

brianbrain said:
haha, very nice. I may have to see how some of the gtab 2 7.0 cases fit myself. Nice to see you also brought your new baby to work with you today :good:
Click to expand...
Click to collapse
I had to bring it to work! It definitely is my new baby. Tethered 4G connection from my Galaxy Nexus Streaming music while getting my work on.

Sexy! The case too!
Thanks for sharing, that case looks made to order on the Nexus 7. :good:

How about the speaker in the back, is it covered or are there holes for it?

There are no holes for the speaker. I did a test at max volume and I have no idea why but it sounds louder with it in the case then out of the case. It could be the way it's configured with the speaker near flush but with a decimeter or so gap. I know with my phones and tablets that they tend to sound louder when they are angled near a wall and I seem to get the same effect with this case.
Sent from my Nexus 7 using xda app-developers app

iamsupreme said:
There are no holes for the speaker. I did a test at max volume and I have no idea why but it sounds louder with it in the case then out of the case. It could be the way it's configured with the speaker near flush but with a decimeter or so gap. I know with my phones and tablets that they tend to sound louder when they are angled near a wall and I seem to get the same effect with this case.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
A decimeter is 10 centimeters...

mewantnexus7 said:
A decimeter is 10 centimeters...
Click to expand...
Click to collapse
Okay. My point is that it's less than a centimeter. Maybe a millimeter or so. Enough tiny space to actually amplify the sound
Sent from my Nexus 7 using xda app-developers app

rediculous price! that's 25% of the tablet. I've seen much better looking case off amazon.

qpqpqp said:
rediculous price! that's 25% of the tablet. I've seen much better looking case off amazon.
Click to expand...
Click to collapse
Link? Cause I haven't seen any. All those cheap amazon cases look cheap and tacky IMO.

http://www.amazon.com/gp/aw/d/B0083...4&linkCode=as4&ref_=as_li_ss_til&tag=noref-20
i bought this elcheapo case for now, at least they have 2 day prime shipping

This case is very similar to the one you bought, but is significantly cheaper.
http://www.yourpoetic.com/p/157/hardback-samsung-galaxy-black
The company has a case specifically for the N7, but no pictures of the N7 in a case. I'm guessing their N7 is waiting to be delivered too. Haha. Anyway, I really like the floating look, and will probably be getting this one.

masterofmayhem said:
This case is very similar to the one you bought, but is significantly cheaper.
http://www.yourpoetic.com/p/157/hardback-samsung-galaxy-black
The company has a case specifically for the N7, but no pictures of the N7 in a case. I'm guessing their N7 is waiting to be delivered too. Haha. Anyway, I really like the floating look, and will probably be getting this one.
Click to expand...
Click to collapse
People on other threads have been linking to Cases listed on Amazon and Ebay with that very similar look (they probably all use the same stock photos) with prices ranging from $10 to $20. Even cheaper.
http://www.amazon.com/MoKo-Slim-fit...?s=electronics&ie=UTF8&qid=1342489646&sr=1-12
http://www.amazon.com/i-Blason-Google-Tablet-Leather-Orange/dp/B008H3PAP2/ref=reg_hu-rd_add_1_dp
http://www.amazon.com/Poetic-HardBa...turer/dp/B008IEGS9W/ref=sr_1_24?s=electronics
I don't know, may be not the same quality but it's hard to judge from photos, or even the prizes.
Only way to judge is hand-on experience like the OP's case, his case looks good also because when the back holds on to four corners only, whereas these ones are a bit 'uneven' (when viewed in portrait mode) : p
I would perfer something that holds on to the edges of Nexus 7 only, like the Official Case or this:
http://www.amazon.com/MoKo-Folding-...ction/dp/B007SA0F7S/ref=sr_1_22?s=electronics

[Q] GALAXY NOTE 2 Metal back cover?

Hey guys, anyone know if, for the Galaxy Note 2, a metal back cover instead of the original plastic one is available to purchase from anywhere?
I want to my note 2 to have a metal back and a case is just not cutting it due to the added bulkiness, it would be much easier if instead of the detachable plastic cover, a metal cover is attached instead.
Now i know that the original plastic cover has an NFC antenna within it so im not sure if this is why im unable to find one online.
Any ideas?

The phone has been out for 3 days....give it some time.

Thanks for the reply, very useful

Keep checking ebay. I'm sure some Chinese ones will be popping up here real soon.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Wouldn't it cause interference problems? I'm no expert here...so probably wrong; but I assume samsung uses crap plastic because it would block the signals, or at least cause problems.

It would indeed. Unless they embedded some antennae into it and had a way to connect it to the main device antennae (all of them), it'll just reduce signal strength.

A metal back cover would stop NFC working and probably interfere with general signal too.

A rubber or textured back would be a nice option

MadfishGTB said:
A rubber or textured back would be a nice option
Click to expand...
Click to collapse
+1
I like the feel of some of the HTC phones.Where they use a metal back with some sort of rubberised coating. Would be nice to have a back cover with that kind of texture, even if made of plastic
Sent from my GT-N7100 using xda app-developers app

I had a brushed aluminium back on my note 1 which I bought from ebay it was sent from hong kong. Like the others said give it a couple of weeks and there will be new accessories appearing on ebay.
Im on the lookout for a desk dock and maybe an inductive charging kit
Sent from my GT-N7100 using xda app-developers app

I would be quite happy with a back cover like the one on the blue Note 1

saldawop said:
I would be quite happy with a back cover like the one on the blue Note 1
Click to expand...
Click to collapse
I'd definitely like that. I'd also like to see a manufacturer (whether Samsung or 3rd party) come out with a replacement cover that also has an integrated kickstand.

I think others have used Plasti-Dip to coat battery covers in order to give a more 'rubberized' feel. I know I'm going to be looking at something like that when I can finally get one out of Verizon.
Sent from my Xoom using xda premium

Alot of people are replying that a different case would intefer with th NFC.
As stated originally, I am aware of this, so when I ask of any alternatives, I ask with the NFC issue dealt with.
IMO, A plastic back is not worthy of my note 2 :good:

qazkamakazi said:
Alot of people are replying that a different case would intefer with th NFC.
As stated originally, I am aware of this, so when I ask of any alternatives, I ask with the NFC issue dealt with.
IMO, A plastic back is not worthy of my note 2 :good:
Click to expand...
Click to collapse
ANY metal case WILL kill your signal UNLESS it's also designed to function as an antenna; which isn't going to happen. So you can either get used to the plastic back, deal with losing some functionality, or get a different phone.

FloatingFatMan said:
ANY metal case WILL kill your signal UNLESS it's also designed to function as an antenna; which isn't going to happen. So you can either get used to the plastic back, deal with losing some functionality, or get a different phone.
Click to expand...
Click to collapse
I'm guessing you didn't read what I wrote despite you quoting it lol. If you read, I asked, with the nfc issue sorted. So in simpler words for you, a case supporting nfc.
Instead you just told me something I already know..
If you don't know of any, then next time you don't need to reply, as rather than answering my question all you just did is try to sound knowledgeable. Well done.
Anyway, asking questions on xda seems to get a lot of hate. Just read 2 other threads and it was filled with blunt, unhelpful replies.

qazkamakazi said:
I'm guessing you didn't read what I wrote despite you quoting it lol. If you read, I asked, with the nfc issue sorted. So in simpler words for you, a case supporting nfc.
Instead you just told me something I already know..
If you don't know of any, then next time you don't need to reply, as rather than answering my question all you just did is try to sound knowledgeable. Well done.
Anyway, asking questions on xda seems to get a lot of hate. Just read 2 other threads and it was filled with blunt, unhelpful replies.
Click to expand...
Click to collapse
I think he was referring more to the fact that you will lose your GSM radio signal with a metal back cover, he was not referring to the NFC.
Personally I think the plastic/polycarbonate material they use for the note 2 is of high quality and keeps the phone light yet strong and keeps radio performance at it's best...
Perhaps the note 2 isn't for you if you feel the quality is that bad?

If he was referring to the gsm, then my bad.
The note 2 is perfect, I had the Dell streak before the note series etc as I'm in love 5" phabs,
I just wondered if alternatives were available, the current back looks good but I'm just a fan of metal covers.
So don't get it wrong as I'm not slating the current back.
So anyway, if it's not available then never mind, curiosity was just asking.

There is another thread on here in this section which mentions some soon to be released alternative back covers for the GN2. They look metallic but not sure if they are actually metal... there is a lovelly carbon fiber effect one too

Great, just found it,
I think I'll stick with the original for now as original is always best looking, but I hope after a while a decent amount of accessories get produced as these days if it's not Iphone it gets slept on.

Take full advantage of magnet screen off feature!

Lol this is dorky but its actually something i wish someone had brough to my attention.
While you're sitting at your pc, or hunkered down watching a movie I found that putting my wallet on top of my nexus acts like those fancy smart cases. then i don't ever have to push a button, i just lift my wallet... SCREEN ON.... put my wallet down.... SCREEN OFF!!! obviously its the built in magnetic sensors meant for their cases, but i hate cases, and so if you have anything you carry around regularly that has a magnet, it just slightly more convenient

Hmm this seems to be interesting. I remember seeing those "surfaces" of slim magnets in a shop few days ago. If you buy those, then you just need some deco on the top if you'd like (I'm thinking of using an old T-shirt with some cool pic or writing on it), glue it on the top = custom smart case
Great find! I will try and find those
Edit: This is what I mean, but a little thinner, and of course bigger to fit the tablet. This is a magnet I have on a fridge. I can't test it however since my N7 hasn't arrived yet (expecting it in a few days).
https://www.dropbox.com/s/p2rwk66so0w5vn8/IMG_20121112_202143.jpg

Considering you're not using a case... I'm going to be blunt and say what you are doing is incredibly stupid. There is NOTHING convenient about that, instead of SIMPLY pressing the button on the side you now have another object which isn't even attached to the tablet to keep track of and move around, instead of SIMPLY pressing a button.
HOLY CRAP WHY!

Yes I know that, but what is wrong with keeping it covered? Protecting from dust, or for deco? I don't think anything is that useless, especially these DIY creative stuff, and yes I'm going to be blunt and say that your post is incredibly stupid and pointless

Why don't you take your nexus 7 and look at it... compare the amount of physical buttons to your phone 3 years ago. Heck compare the amount of physical buttons to the galaxy s3 that came out mere months ago. you're being narrow minded if you honestly can't see the value of anything that would be an effective alternative to a hardware button.

JavaJunkay said:
Yes I know that, but what is wrong with keeping it covered? Protecting from dust, or for deco? I don't think anything is that useless, especially these DIY creative stuff, and yes I'm going to be blunt and say that your post is incredibly stupid and pointless
Click to expand...
Click to collapse
Ha i like it. People carry change in their pockets all day, why not a little quarter sized magnet!

BamAlmighty said:
Considering you're not using a case... I'm going to be blunt and say what you are doing is incredibly stupid. There is NOTHING convenient about that, instead of SIMPLY pressing the button on the side you now have another object which isn't even attached to the tablet to keep track of and move around, instead of SIMPLY pressing a button.
HOLY CRAP WHY!
Click to expand...
Click to collapse
You know, it might be in your best interest to keep your opinions to yourself, because obviously you don't know how to word them nicely.

I'm surprised that there isn't a (decent) case (not the crap you see on ebay) on the market that makes use of the mag feature.

DeadlyDazza said:
I'm surprised that there isn't a (decent) case (not the crap you see on ebay) on the market that makes use of the mag feature.
Click to expand...
Click to collapse
http://www.speckproducts.com/fitfolio-for-google-nexus-7.html

DeadlyDazza said:
I'm surprised that there isn't a (decent) case (not the crap you see on ebay) on the market that makes use of the mag feature.
Click to expand...
Click to collapse
I am spectacularly happy with my RooCase:
http://www.amazon.com/rooCASE-Multi-Angle-Leather-Google-Automatically/dp/B008F05Q2E

JavaJunkay said:
Yes I know that, but what is wrong with keeping it covered? Protecting from dust, or for deco? I don't think anything is that useless, especially these DIY creative stuff, and yes I'm going to be blunt and say that your post is incredibly stupid and pointless
Click to expand...
Click to collapse
The sensor is under the glass... you can't see it. What are you protecting it from?
How is putting a magnet or a magnet in your wallet on your phone creative? How is that any better than pressing a button on the side of the phone? How?
Taking full advantage of the sensor is using an actual case or cover instead of having to take a i
magnet off and on it. Hey guys! I put a Apple sticker on the back of my N7, that is creative!

BamAlmighty said:
Hey guys! I put a Apple sticker on the back of my N7, that is creative!
Click to expand...
Click to collapse
Take my money!
Sent from my Nexus 7 using Tapatalk 2

I can't actually believe I just read this, and I just hope you are a massive troll. I am not going to present not even a piece of mountain of arguments I can open now. I'll just move away from you before I get ban. Your post brought nothing slightly productive here.
For the end of this: if you'd like to keep your sensor protected (and I'll ignore the fact that I was actually referring to the screen) just move away from this topic and lock your device with the power button. That is not the purpose of this thread anyway. Thanks.

DeadlyDazza said:
I'm surprised that there isn't a (decent) case (not the crap you see on ebay) on the market that makes use of the mag feature.
Click to expand...
Click to collapse
I have a Blurex case for my htc flyer. The nexus version is a "smart" case (has a magnet) . You can pick it up for $15. Check amazon.
You can find reviews on amazon and in xda nexus accessories forum. If you want something high end, use smart case as your search terms in the forum.
PS Blurex has at least 2 models. I prefer the slim case.

DeadlyDazza said:
I'm surprised that there isn't a (decent) case (not the crap you see on ebay) on the market that makes use of the mag feature.
Click to expand...
Click to collapse
I love my Blurex folio case. Very well made and classy looking.
http://www.amazon.com/Blurex-Multi-...352771289&sr=8-2&keywords=nexus+7+blurex+case
Sent from my Nexus 7 using xda premium

JavaJunkay said:
I can't actually believe I just read this, and I just hope you are a massive troll. I am not going to present not even a piece of mountain of arguments I can open now. I'll just move away from you before I get ban. Your post brought nothing slightly productive here.
For the end of this: if you'd like to keep your sensor protected (and I'll ignore the fact that I was actually referring to the screen) just move away from this topic and lock your device with the power button. That is not the purpose of this thread anyway. Thanks.
Click to expand...
Click to collapse
If this, well written very useful thread makes u so mad that you are worried that you will get banned why don't you check out this website, it may calm you down. www.hasbro.com/mylittlepony
EDIT; or you could check out this website. www.apple.com people at this website are just like you, they don't like to do things in fun and creative ways. They like to do the same boring thing, over and over and over.
Sent from my LG-C729 using xda app-developers app

DeadlyDazza said:
I'm surprised that there isn't a (decent) case (not the crap you see on ebay) on the market that makes use of the mag feature.
Click to expand...
Click to collapse
Despite the low price, I love my Poetic case. It has a good quality leather shell, uses the magnets, and has a hand strap and stylus holder. Best $6 case ever.
http://www.amazon.com/gp/aw/d/B008IEGSGU/ref=mp_s_a_1?qid=1352782305&sr=8-4&pi=SL75
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I'm failing to see why everyone is attacking the OP. If you don't think its convenient, don't do it. If you think it's a stupid idea, don't do it. We all live in free countries, right? OP was sharing some information, and a button- sized magnet sounds like a pretty cool idea for people who don't use cases
Sent from my DROID4 using Tapatalk 2

This was fun lol. I'd like to refer all aformentioned haters to the 4th word of my post "dorky". I knew full well this would only be helpful to a very small few people who carried a money clip with a magnet in it, or i guess those who just carry magnets out of habit. But i'd like to explain the physics behind why i though this was easier.
physical button method:
as we all know a force applied mandates an opposing force, especially to remain static. so what it comes down to is you having to pick up your nexus 7 because the button is slightly underneath the bezel, and if you have big enough hands squeezing it, thus applying equal and opposing forces to turn on your screen.
Wallet/button magnet method:
picking up your small wallet, which weights less than your tablet by many times, this reduces overall work required, is accomplished in a bit shorter time, and probably leaves a smaller CO2 footprint on our environment (i just watched a ted talk).
Thanks for all you who could just enjoy a friendly tip and not lose your heads over it. There are litterally thousands of threads just in this nexus 7 forum that are even more useless than what i poted

Also i have a strong dislike for cases on my devices, but I will admit i've never been more tempted than by some of the ones you guys shared, much thanks for the heads up!