[Q] need help with bricked captivate - Captivate Q&A, Help & Troubleshooting

my son got the captivate and I upgraded it OK to AOCP 4.1 (I believe). He went and messed around with it and got it in a bricked state. Its a long story but here's where I am now:
On power up, it goes to the At&T world phone screen and stays.
If I hold both buttons while powering on, it goes to the stock recovery screen but reports:
Media files copy failed.
# Manual Mode#
--Appling Multi-CSC...
Installing Multi-SCS
Can't access to '/system/csc/ATT/system/'.
E:failed to mount /cache (invalid argument)
E:Cant mount /cache/recovery/log
E:Cant open /cache/recovery/log
E:Gailed to mount /cache (invalid argument)
E:Cant mount /cache/recovery/last_log
E:Cant open /cache/recovery/last_log
E:failed to mount /cache (invalid argument)
It no longer shows up in Odin All I can ever get is it showing up as two removable drives in windows, that say "please insert media" (or whatever). If I insert an sdcard in the slot it won't show up in one of the drives.
Help!

Have you tried getting into download mode? If you can your best bet would be to revert to stock using a one click. There's a sticky thread in the development section for the one clicks. I suggest kk4 it will do a complete wipe and should get you back up and running on gingerbread. From there you'll just need to Odin a custom kernel and then you can flash to whatever ROM you would like.
Sent from my SGH-I897 using xda app-developers app

Also see this thread... Captivate PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SGH-I897 using xda premium

4-2ndtwin said:
Also see this thread... Captivate PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Thanks for the link! The first thing in the list got me into download mode. I thought I'd tried everything.

Related

Phone won't boot

I'm not sure what I've done, but I obviously wasn't paying attention. I had RyanZA's 2.3 beta lagfix installed and I decided to uninstall it using the supplied script. At some point I saw my phone reboot and I thought it had finished, but I don't really remember what happened after that.
Anyway, I've got it to the stage where it just shows the i9000 startup screen, goes black, then shows the i9000 screen again. I can get into recovery and I've got clockwork recovery installed as well, so I can get into that. I've used adb, but I can't get a log of it booting because it just says waiting for device and never gets past that stage. I used adb shell to see if I could manually process the scripts, but it looks like all the data and the backups of the data folders are gone.
I've wiped data in both clockwork and stock recovery, but I still can't get the phone to boot. System still looks ok, so I'm not sure why it's not working.
Anyway, my main question is, how can I get my phone back up and running? The mount usb option doesn't seem to be working, so I guess I'll have to use Odin or KIES, but what do I flash? Is there a link for a stock UK i9000 firmware somewhere?
Update:
Ok, I've got the phone working again, but after using Odin to flash the firmware, it reboots into recovery and I get the message can't mount /dev/block/stl11 (invalid argument)
The phone boots ok, but I can't download anything from the market ("download unsuccessful" almost immediately)
Internet works fine, so I don't think that's the problem.
Further update:
After Odin has flashed, the phone boots into recovery with the following messages:
E: Can't mount /dev/block/stl11 (invalid argument)
update media, please wait ...
E: Can't mount /dev/block/stl10 (invalid argument)
E: copy_dbdata_media:Can't mount DBDATA: copy default media content failed
E: Can't mount /dev/block/stl11 (invalid argument)
E: Can't mount /dev/block/stl11 (invalid argument)
This was after flashing WJM6 with .513 pit
You can try this...connect your phone with KIES and update it with the official firmware. I have not tried this so I dont know if it will help you.
Thanks, I eventually got it to work by flashing the WJG5 firmware. It would probably help if I'd known what it was actually running in the first place.
Now I've got it working though, I might try connecting to KIES and seeing if there's an updated version.
hey there, is this resolved? i got mine working after
can't mount /dev/block/stl11 (invalid argument)
but its still there. Do u know how to clean this error?
Update: I Fixed it by reflashing to WJG5 as stated above. BUT when i tryed reflashing with newer rom its still there..
Joans said:
I'm not sure what I've done, but I obviously wasn't paying attention. I had RyanZA's 2.3 beta lagfix installed and I decided to uninstall it using the supplied script. At some point I saw my phone reboot and I thought it had finished, but I don't really remember what happened after that.
Anyway, I've got it to the stage where it just shows the i9000 startup screen, goes black, then shows the i9000 screen again. I can get into recovery and I've got clockwork recovery installed as well, so I can get into that. I've used adb, but I can't get a log of it booting because it just says waiting for device and never gets past that stage. I used adb shell to see if I could manually process the scripts, but it looks like all the data and the backups of the data folders are gone.
I've wiped data in both clockwork and stock recovery, but I still can't get the phone to boot. System still looks ok, so I'm not sure why it's not working.
Anyway, my main question is, how can I get my phone back up and running? The mount usb option doesn't seem to be working, so I guess I'll have to use Odin or KIES, but what do I flash? Is there a link for a stock UK i9000 firmware somewhere?
Update:
Ok, I've got the phone working again, but after using Odin to flash the firmware, it reboots into recovery and I get the message can't mount /dev/block/stl11 (invalid argument)
The phone boots ok, but I can't download anything from the market ("download unsuccessful" almost immediately)
Internet works fine, so I don't think that's the problem.
Further update:
After Odin has flashed, the phone boots into recovery with the following messages:
E: Can't mount /dev/block/stl11 (invalid argument)
update media, please wait ...
E: Can't mount /dev/block/stl10 (invalid argument)
E: copy_dbdata_media:Can't mount DBDATA: copy default media content failed
E: Can't mount /dev/block/stl11 (invalid argument)
E: Can't mount /dev/block/stl11 (invalid argument)
This was after flashing WJM6 with .513 pit
Click to expand...
Click to collapse
Hello
I had the same and i solved through the guide here:
http://briefmobile.com/how-to-android-2-2-on-galaxy-s
But i think the problem really was that i have make an ext2 partition on sd-card.
I removed the sd-card during flashing.
Hi Guys, I'm looking for some help for a mate of mine who can't get his Samsung Galaxy S to start up.
The phone is box standard from Vodafone and only a couple of months old. It hasn't been rooted or tampered with in any way.
Today he decided to plug it into kies to check for updates and it showed him that there was an update available for his phone. he followed the on screen prompts and went about updating it. After it updated the phone just died on him. I have spoke to him over the phone to try and explain the 3 button recovery method to him but he still can't get it to boot up. He has sent me a photo of his phone so hopefully that may help for any potential advice. I'm no phone expert but could easily follow any instructions/ guides on flashing etc.
Any advice or help would be most grateful
Cheers, Sean
Pull out the usb cord.
Sent from my GT-I9000 using XDA App
DamianGto said:
Pull out the usb cord.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
He has done that and still no Joy
sean2476 said:
Hi Guys, I'm looking for some help for a mate of mine who can't get his Samsung Galaxy S to start up.
The phone is box standard from Vodafone and only a couple of months old. It hasn't been rooted or tampered with in any way.
Today he decided to plug it into kies to check for updates and it showed him that there was an update available for his phone. he followed the on screen prompts and went about updating it. After it updated the phone just died on him. I have spoke to him over the phone to try and explain the 3 button recovery method to him but he still can't get it to boot up. He has sent me a photo of his phone so hopefully that may help for any potential advice. I'm no phone expert but could easily follow any instructions/ guides on flashing etc.
Any advice or help would be most grateful
Cheers, Sean
Click to expand...
Click to collapse
If the phone can enter download mode, it can be rescued. Otherwise, it was definitely bricked.
Sent from my GT-I9000 using XDA App
Try to pull out the battery for 10 minutes. Then but the batteri back.
Then try to get in download mode.
If you can't, the try to see if odin see it.
If odin can see it try to flash back original firmware.
If you are lucky it can work.
If not then it seems very bad.
Sent from my GT-I9000 using XDA App
Thanks Damian, I will pass this info on to him tomorrow. I wish my mate lived closer so I could have a go at it myself.
i do have the exact same problem but flashing JM8 doesn't solve it.
in odin 1.3 with re-partition enabled I used s1_odin_20100512.pit, CODE_I9000XWJM8.tar.md5 as PDA and MODEM_I9000XXJM4.tar.md5 as phone
on startup I still get "E:Can't mount /dev/block/stl11 (Invalid argument)"
any ideas please?
XlAfbk said:
i do have the exact same problem but flashing JM8 doesn't solve it.
in odin 1.3 with re-partition enabled I used s1_odin_20100512.pit, CODE_I9000XWJM8.tar.md5 as PDA and MODEM_I9000XXJM4.tar.md5 as phone
on startup I still get "E:Can't mount /dev/block/stl11 (Invalid argument)"
any ideas please?
Click to expand...
Click to collapse
Why dont you flash crc also?
Try to do a complete flash.
Then go in recovery more and do wipe catch and a factory reset.
If you manage to get it to boot do format your internal sdcard.
Sent from GT-I9000 Jpm OS kernel with z4mod

Please help.. E:failed to mount /system problem

my Samsung galaxy tab 7.0 plus wifi us version P6210ma is stuck on the samsung startup logo it started when my tab got lowbat then i recharged it for awhile when i opened it the issue happened. i already tried using odin and flashing my tab to its original firmware then wipe data/ factory reset then reboot but after reboot this problem showed up.
updating application
E:failed to mount /system (invalid argument)
E:install_application_for_customer:Cant mount /system
appling Multi-CSC
E:failed to mount /system (invalid argument)
E:multi_csc:cant mount /system
please help me i dont know what to do anymore .... thank you in advance!!
Sure I don't know about galaxy tab 7 plus, but try to flash stock rom via Odin and make sure to select re-partition when you select the pit file.
BTW you post this in the wrong forum.
Sent from my GT-P1000 using XDA
help please...
You are in the wrong forum. He told you so.
This is for original galaxy tab 7".
Sent from my GT-P1000 using XDA

[Q] failed to mount /data (Invalid argument)

Once wiped and rebooted stills shows the next message:
E:failed to mount /data (invalid argument)
E: copy_log_files_to_data :: can't mount /dataRebooting
Could the inner partition be restored?
The phone admits recovery and download options, but any (official or not) rom can be installed without access to the damaged inner partition.
pd. it's a samsung galaxy ace s5830i, which was rooted and enhanced with the LINK2SD app and nothing more (no previous overclocking, no flashing attemp)
Thanks in advance.
In Odin, put the .pit file, and tick "Repartition" (your phone must be in the download mode).
This should (yes, SHOULD) work.
Sent from my GT-S5830i using xda premium

[Q] SHW-M180S repartition successfull but with undesirable result...[SOLVED abit]

ok now that i sucesfully reparttioned my shw-m180s,
i have a tiny bit of problem on the internal sd card...
its not showing the 16gb storage,instead its 210mb size..
.i have now sucesfully collected all the files i need to flash and keep on reflashing,
but i cant find a way to successfully make the internal sd to gb
,instead it keeps goin back to the 210mb,
before i have the no internal sd card detected or error,
but it shows upfor a sec then gone,now its just 210mb,
anyone else who have this problem that successfully corrected the repartition process kindly guide me to make it to gb instead of just mb...
for those interested heres the file url links for you to use
stock SHW-M180S Files:
http://gadgetmodder.com/2012/11/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
Ice Cream Sandwich rom:
http://gadgetmodder.com/2012/11/gui...m180s-korean-anycall-tablet-to-android-4-0-4/
Theres another thread here on forums for the Jelly Bean system but i wouldnt suggest it coz i cant access the recovery mode but ill add the link too
Jelly Bean Rom Thread Link:
http://forum.xda-developers.com/showthread.php?t=2057050
this threads and files are not mine,i just looked hard to get these from all the sites i came across,thanks to them i can use my tab even with 210mb (^^,)
after many months of being stuck,
i have now successfully restored my internal to stock with some threads and files ive collected,
all came clear after 2 days ago,why? coz I was always partying and drinking lol
ok the trick is
1. enter download mode to flash m180s_4.1.2_CN_130109 tarball via odin 1.85
2. it be a constant loop in recovery choose advance option reparation sd card to settings u want
3. mount sd card to pc to check desired internal
4. clear all data cache dalvik etc if u can
5.enter download again to flash the rom that worked before,as for me im stuck with Jiwon ROM 2.0S Full
I cant retun to stock froyo,gb and rooted ics. the error still shows when im using those roms
now its what im working on,hope to fix it as soon as possible
and they say it cant be fixed lol, go prove them wrong (^_^)
heres a site with the files I used,credit goes to all to ones that shared it
http://main.develoid.com:81/samsung/Galaxy/Galaxy Tab/SHW-M180S/
site is moved
hi this site is moved to mobile-hub.net
here is the new links
4.0.4 ugrade is here http://mobile-hub.com/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
root guide is here http://mobile-hub.com/guide-how-to-root-samsung-shw-m180s-korean-anycall-tablet/
back to stock is here http://mobile-hub.com/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
After Flash it shows E:failed to mount
After i flash my Samsung Galaxy Tab SHW M180S(B) with \HOME_M180S.UC27.2041_CL1058960_REV03_user_low_ship.tar.md5
and it seccessfully pass in Odin.but after reset it shows a error message like
E:Failed to mount /Cache (Invalid Argument) what should i do now......
E:failed to mount /data (Invalid argument)
E:failed to mount /cache (Invalid argument)
E:Can’t mount /cache/recovery/command
Checksum confirmation -> check(0)
Not need checksum confirmation
Already executed!!...
# MANUAL MODE #
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/recovery_kernel_log
E:copy_kernel_file :: Can't open /cache/recovery/recovery_kernal_kernel_log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/log
E:Can't open /cache/reovery/log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (Invalid argument)
stock rom i have same result, only way to fix that is by jtag, the solution i found was to bring back the internal

[Q] Tab stuck on Samsung logo

Samsung Galaxy Tab SPH-P100
Carrier: Sprint
Tab is stuck on Samsung boot screen, I am able to go in to download mode, and tried multiple times to do a factory reset but keep Showing up (E:can't open/cache/recovery/last_log)
I tried to flash it with a SPH-P100 Rom but no luck.
Tried putting EA24 modem no luck
Ive been looking but all threads are old can not access links
Any type of help would be appreciated.
Thanks in advanced
probably same as this thread just a few below your.
Have you tried?
Including my post that link to the Mega development thread on Sprint tab, that has a live link of downloads?
priyana said:
probably same as this thread just a few below your.
Have you tried?
Including my post that link to the Mega development thread on Sprint tab, that has a live link of downloads?
Click to expand...
Click to collapse
Thanks for the fast response to tell you the truth I am a noob on android Ive been searching how to fix but can't If I could get a link to instructions and updated files to resolve my problem?
Thank You!!!
This one
http://forum.xda-developers.com/showthread.php?t=2373340
and the thread I linked to near the end before the user got his fixed.
Heeeellpppp
I have this Samsung Galaxy tab GT-p1000 whose applications are getting error message of "force close", I tried to delete all the installed applications, restored factory settings but It doesnt seem to uninstall all the applications, So I decided to
upgrade it from Gingerbread 2.3.6 to ICS after installing it I got an error message of "Encryption Unsuccessful", So tried resetting it, rebooting, wiping factory settings, wiping cache but nothing happened, I even removed the sdcard before rebooting it but still I got the same error message.
I got frustrated and made a stupid mistake, I formatted everything thru recovery mode, format /data, format /sdcard, format /system and all. Yes every possible format. Here comes the problem when I rebooted the system, I only got the "Galaxy Tab, Samsung" screen. I can't enter recovery mode anymore, I can still enter download mode but my pc won't recognize it, so Odin can't recognize it too. What should I do now? HEEEELPPPP pleassseeeee :crying:
If Odin can't recognise it, use a new PC.
Many have done so, even one last week.
Sent from my GT-P1000 using xda app-developers app
priyana said:
This one
http://forum.xda-developers.com/showthread.php?t=2373340
and the thread I linked to near the end before the user got his fixed.
Click to expand...
Click to collapse
I tried the process but after usig the tar file on odin I get this message
--botmode7=7 from cmdline...
E:failed to mount /cache (no such file or directory)
E:can't mount /cache /recovery/comand
--wiping data...
formatting data...
E:formating_volume: rfs format faild on /dev/block/mmcblk0p2
formatting /dbdata...
formatting /cache...
E:format_volume: rfs format failed on /dev/block/mmcblk0p1
data wipe faild.
E:failed to mount /cache (no such file or directory)
E:can't mount /cache/recovery_kernel_log
E:copy_kernel_file :: can't open /cache/recovery/recovery_kernel_log
E:failed to mount /cache (no such file or directory)
E:can't mount /cache /recovery/log
E:can't open /cache /recovery/comand
E:failed to mount /cache (no such file or directory)
E:can't mount /cache /recovery/log
E:can't open /cache /recovery/comand
E:failed to mount /cache (no such file or directory)
Any solution for this after this I try to reboot but The TaB is still bricked.:S
Thanks for your Help.
same comment here as in there.
It is either the partition is screwed up or the NAND chip is bad.
If you did Odin with PIT file and repartition ticked, and didn't come back alive like the other forumer there, then your internal NAND chip is bad.
There are several threads dealing with how to use external SD only and on damaged internal SD.
priyana said:
same comment here as in there.
It is either the partition is screwed up or the NAND chip is bad.
If you did Odin with PIT file and repartition ticked, and didn't come back alive like the other forumer there, then your internal NAND chip is bad.
There are several threads dealing with how to use external SD only and on damaged internal SD.
Click to expand...
Click to collapse
Sir, it seems that this internal chip problem is a huge problem for gtab7 users.. is it better if someone make the tutorial on how to use the external sd to stickies so ppl can notice it? Thanks..
Sent from my Galaxy Nexus using xda app-developers app
There is already one such thread
http://forum.xda-developers.com/showthread.php?t=1463756
Sent from my GT-P1000 using xda app-developers app

Categories

Resources