Hi guys, I have a problem with the 2G/3G toggle in the notification bar. It doesn't seem to work properly. When I want to switch to 2G, it immediately switches back to 3G.
A reboot does not help.
Does anyone else have this problem? Is there a solution?
I just want to have a quick way to switch between 2G and 3G. It worked fine in CM9.
i9000
CM10 stable
Stock kernel
Toggle settings is set to 2G/2G+3G
Am I really the only one having this problem?
I find that hard to believe, having only stock kernel and not having changed anything in the developer settings.
Can no one reproduce the bug?
2G-3G switch
Holzarbeit said:
Am I really the only one having this problem?
I find that hard to believe, having only stock kernel and not having changed anything in the developer settings.
Can no one reproduce the bug?
Click to expand...
Click to collapse
You're not alone.
I also don't work. I tried lots of modem (jvt, jvu, jw4) same results. :crying:
And cm9 works fine !
I can confirm that. But I find it quite weird that a reboot doesn't help. Oo For me it works a couple of times and after that it stops working and I have to reboot.
Sent from my Gameboy Color
you are not alone
Same Problem here...my phone (SGS I9000) doesn't seem to work on 2G anymore since yesterday update. If I switch to 3G it works. there seems to be some problem on 2G networking??
Welp, I tried using Semaphore 2.5.0. Didn't work, the problem's still there and unchanged.
Any ideas?
Same problem here. Sometimes reboot helps, sometimes not. I tried with stock and Sema 2.6 kernel and with stock and jw1 modem. Neither of them are working correctly. I'm using a nightly.
+1 on stable cm10
with latest HellyBean the same problem. sometimes the toggle work, sometimes not.
edit: after wipe cache again, it works. a bit slow... but it works!
Related
Installed Cm7 Insanity yesterday, great Rom.
Issues
No Bluetooth, tried clear data and reboot, not working.
I flashed Glitch kernal and lost signal, also could not acess settings. But Glitch gives me bluetooth
Anyone got any ideas ?
Friend what is your problem ??
also try upgrading your ROM as i think it solves some problems
Hey, problem is sorted, I re-flashed Insanity, and still got no bluetooth, so then I flashed glitch and got bluetooth but no signal, so I re-flashed Insanity then Glitch and all is well, signal and bluetooth.
Though I found using Go Launcher Ex and Go SmS cause me problems with Insanity.
I dont want to move away from Insanity as I like CM7 Rom, and this is the most stable CM Rom I have found so far the nightlys just dont seem to work very well yet.
Hi guys,
I'm being annoyed by my SGS about his data connection. Hope someone could help me!
Few days ago I flashed MIUI Mintberry 2.1.20 and everything was working like a charm, but this morning data connection switch failed several times.
I've tried to wipe everything, re-flash Mintberry and even to flash JVU stock with Odin, but I still can't switch on my data connection.
I can't even see any icon on the status bar.
Any idea? Is my phone broken?
kpaolo said:
Hi guys,
I'm being annoyed by my SGS about his data connection. Hope someone could help me!
Few days ago I flashed MIUI Mintberry 2.1.20 and everything was working like a charm, but this morning data connection switch failed several times.
I've tried to wipe everything, re-flash Mintberry and even to flash JVU stock with Odin, but I still can't switch on my data connection.
I can't even see any icon on the status bar.
Any idea? Is my phone broken?
Click to expand...
Click to collapse
Hmm this is strange, so you turned data on but theres no symbol, right? Have you tried installing another kernel (maybe also applying the Kernel Cleaning Script)?
I' ve tried everything with Odin, and at the moment I have a beautiful black screen of death.
Odin cannot recognize my phone... I'm very frustrated
EDIT: Upgrading Kies'drivers, I managed to connect the phone with Odin again, so I've flashed the lastest official stock firmware to check my antennas. In the worst case, I'll be able to go to the shop for assistance without problems.
Have u tried typin ur apn maually?
Sent from my GT-I9000 using xda premium
Sounds like a settings issue. Never heard of anyone have this problem before - I've flashed every version of mintberry including betas.
I just had this issue
I just had this and figured out what is wrong, its a easy fix too! Just go to settings and wireless and change the access point for your mobile connection. I had 2 access points and just switched it to the other one and my data started working again!
Hope I could help
Hi guys! thank you for all these answers!
I've tried to set APN manually, to change custom ROM and custom kernels and coming back to stock too, but still no data connection icon (neither data connection itself).
At the moment, I'm on JVO, the latest official italian firmware, everything is fine but 3g data connection.
Other ideas? Shall i need of Samsung customer service (I hope no!)?
Solved...
MIUI default settings fault: SMS notification has ran out my money and my provider has blocked 3g connection.
My phone is safe!
am I the only cm7 user who's phone turns on airplane mode by itself? is this a rom or kernel related issue? I am on temasek's latest kang, running the latest 32s cm7/miui kernel... I have had this issue for a while... any insight would be greatly appreciated...
my apologies if this has been answered many times before... but I have searched this topic before posting...
download the getril app fron android market and instalma matching ril.. this will solve your problem
hit *thanks*button if this helped you
Sent from my Optimus 2X using xda premium
lefterakos said:
download the getril app fron android market and instalma matching ril.. this will solve your problem
hit *thanks*button if this helped you
Sent from my Optimus 2X using xda premium
Click to expand...
Click to collapse
already have that, still the same...
kemmo123 said:
am I the only cm7 user who's phone turns on airplane mode by itself? is this a rom or kernel related issue? I am on temasek's latest kang, running the latest 32s cm7/miui kernel... I have had this issue for a while... any insight would be greatly appreciated...
my apologies if this has been answered many times before... but I have searched this topic before posting...
Click to expand...
Click to collapse
maybe your ril is just not combatible,
instead of just using the recommended ril try a few others.
also, if you have any power saving programs set to auto switch to 2g when screen is off, could be causing the phone to turn off the radio to switch to 2g / 3g and thats not working because the network is unavailible.
changing your ril orchecking your power settings with any radio manager (like the power manager in CM) you can set it to turn off / on 3g when wifi is on / off and so forth.
could be some of these settings messing with it, and becasue the ril / bb is not working correctly its just bomming out and staying on flight mode because its lost the signal.
so either try a fresh full wipe install install (do a nandroid for backup testing)
check your problem with a fresh install. change rils if you experience the problem (use any of the rils with the same number (.eg. 0725 rils or whatever) check the discription on getril as it pops up what it is and where it came from in a pop up as you select them.
keep matching til you find something that works, (try about 4 - 6)
if all of the above dont work you may try a BB change. but take extreme care*
i dont like changing basebands unless i have to =/
Try 218 ril.
i had that problem while using temaseks kang with proper RIL (phone would lose signal and wouldn't reconnect to network, and trying to reboot with a airplane mode on/off would just make the phone stuck in airplane, even after reboot). the thing that i noticed is that airplane mode would get stuck if activated from power menu, wireless networks menu .. but solved the problem adding the Airplane mode to the notification bar power widgets (icons in notification bar) and airplane mode would then get deactivated normally. that was the only way i got to deactivate airplane mode running temaseks kang.
hmm, still trouble. Flight mode is randomly enabled, and only reboot can change this...
I have used [CM7][UNOFFICIAL][NOV10] temasek's ROM for more than one year with default kernel,
I now have updated all my phone
Only change i have now is that i use kernel: 2.6.32.59 symbi0sis-v1.3.1-UHC [email protected]#1
Thanks to temasek for a really nice ROM!
But, could this kernel make this type of flight mode trouble?
Should i use another kernel?
Or is there a other solutions?
In app GetRIL i get message that RIL/baseband dosnt match.
Seems that i have RL 0218 /V10b Erope) but i should have 0725 (V10d, europe) Any comments?
Thanks
I fixed this problem by disabling automatic time in settings. I then installed Clocksync to set the proper time. Dont know why this worked, but it just did, so give it a try and reboot.
Sent from my Optimus 2X using xda app-developers app
same problem
if it helps,
i have a same problem with cm7 and galaxy3.
still trying to determine what triggers it.
i'm not willing to give up on cm7. it's a great rom
Hi,
first of all I want to thank all of you pushing the SGS to the newest level of smartphone software.
Here is the problem:
I installed CM9 exactly as it was discribed in the tutorials. Everything is working fine, except the wifi module.
When the device is in the airplane mode and wlan is activated, there is no problem, but when I turn off the airplane mode and turn it on again after a short time, I get a reboot or the wlan settings screen freezes at "WLAN is activating", when I want to turn on WIFI again.
I tried all available kernels (devil, semaphore,...), tried TeamNyx RC5, tried CM10 and nothing improved this situation!
Flashing the JVU(or another stock Gingerbread) via Odin, I can use the WLAN correctly.
Thanks for your efforts!
EDIT:
I get the same problem on CM10
Using CM7 everything works perfect!
Please: If you got the same problem, answer to this thread!
Same here on Vibrant. CM9 and 10 only.
Sent from my T-Mobile Vibrant using Tapatalk
Hello everyone,
I flashed CM 10.1.2 with build-date 2013 Jul 11 and I can't activate my WiFi anymore.
Bluetooth is ok, but I can't disable NFC - same as WiFi.
I push the button and it's "working" to activate wifi or deactivate nfc - but nothing happens. [edit: nfc working after reboot]
I've got not many ideas what I can do. Everything is working fine with the stock rom v.20a EUR_Open.
Has got someone an idea what I can try?
I did every step on it's own to have a look on which point the problem appears - after installing cm 10.1.2 with cwm recovery.
Bootloader is unlocked.
I'm looking forward to your suggestions and please accept my apologies for my bad english.
Kind Regards
FChaos
For nfc, just restart once, that will fix it
Hey,
im having the same issue with wifi.
When i try to activate the switch gets stuck in grey but it does not activate.
I have it since I installed CM 10.1.2 stable. Before everything worked just fine.
Any solutions for this problem?
Greetz
Wipe cache & dalvik cache
Fix permissions
Reboot
If that doesn't work then full wipe and reflash.
Note: WEP encryption will not work with CM v10.x so make sure you are using WPA on your wireless networks.
I already tried everything you mentioned, but nothing works for me.
WEP is not the problem, because I can't even get to the point to select my router. Also I'm using WPA2 at home.
eliarno said:
I already tried everything you mentioned, but nothing works for me.
WEP is not the problem, because I can't even get to the point to select my router. Also I'm using WPA2 at home.
Click to expand...
Click to collapse
I presume the CM build you refer to is a nightly? Try a different one or CM stable - nightlies are a beta software and may have random bugs.
The problem occurs since I installed the CM 10.1.2 stable.
After that I also tried some of the new CM 10.2 nightlies, but the problem still exists.
Any other ideas?
Edit:
When I install Android 4.1.2 Stock everything works just fine, but the moment I install CM wifi does not work anymore.