Database Develop

[Q] Micro SD card won't stay in --- returning to B&N NOT an option

Arrrrgggghhhhh . . . micro SD card won't stay in. I know I'm pushing it in far enough and it feels like it's locking in place. I had NO problem ejecting it so it just doesn't make sense.
I've tried 2 different cards and neither will stay in. I search XDA and internet for solution but the only thing that I find is to return it because it appears the SD card slot is broken. I bought my NC used on eBay over 2 months ago and everything has been working fine, so returning it is NOT solution for me.
Any suggestions are very, very much appreciated!!
By the way, this is my first post . . . so, please be gentle!!!

Can you get it to boot from it if you hold it in with your finger?
---------------------------------
Sent from my LG Optimus V using Tapatalk
If this post helped you don't forget to say thanks!

flynlady said:
Any suggestions are very, very much appreciated!!
Click to expand...
Click to collapse
The same thing happened to me, I also couldn't return it. I bought it from eBay and I live in Europe.
I couldn't fix the SD slot, but I noticed that if I force the card to stay in it connects. In the end I pushed a folded piece of thin cardboard between the card and the plastic, which forced the card to stay in. It has worked ok for the last 4 months or so. I cannot remove the sd-card though, but since I have a 32gb one, it doesn't really matter.

Could it be out of spec cards and not the nook that is causing the problems? Have you tried other cards or brand of card to see if they might stay in place?

Great_Bizarro said:
Could it be out of spec cards and not the nook that is causing the problems? Have you tried other cards or brand of card to see if they might stay in place?
Click to expand...
Click to collapse
For me at least the sd card slot was definitely broken, I tried at least three different cards from different brands that were official ones/not counterfeit.

Similar happened here. In this case, after about 8 months the 2 retaining springs fell out, so the card wouldn't "latch" in place. At least I could put the card in and have it work but had to use a dental tool to rescue it.
It was still under the original warranty (and I did buy the 1yr extended as well-I think I'm going to be glad that I did).
B+N CS was slow and slightly clueless- but unfailingly nice. Had a "new" refurb in 5 working days.
Even if you're the second owner, you might want to call CS and run the serial # to see if there's still any warranty left. Couldn't hurt.....
Otherwise, if you're brave enough, you can try to get in there and remove the springs entirely. The card will stay in place but you will need a tool of some sort to remove it when needed.

I had the same issue, called B&N and they wanted to to take it to the closest B&N to me which is like an hour away. I kinda did something that was bad for me to do but I erased everything before attempting to install a ROM. I was able to boot into recovery but I can install stuff from the uSD. i ended up erasing the entire nook to where it boots to a screen that says
Code:
A N D R O I D _
and said something had happened and the CS finally sent me a new nook.

Thanks for all of the feedback. The Nook boots up just fine. I needed to install the old version of Marketplace so that's when I discovered that the sd card won't stay in. I had JUST used it to restore a backup and I had no problems ejecting it nor to I recall hearing anything weird or seeing anything fall out (other than the sd card). I'll try rantak's sugguestion of a piece of cardboard.
I spent 45 minutes at B&N when I first bought the NC as I wanted to register it in my name but because I couldn't contact the previous owner to deregister, B&N basically refused to help me with anything! And I felt they were looking down on me because I bought a used NC on eBay. It wasn't like I would NOT be a customer but after that . . . I'm NOT a customer any longer!!!

Mine now does this to, but if I push hard it will finally stay in place, but I'm afraid that will sooner or later cease working as a solution.
And I've rarely removed the sd card.

Mine did this in the middle of a nightly update. I had to physically hold the card in while I wiped it and restored to stock so that I could get it replaced under warranty. Called B&N on a Monday night a new refurb by Wednesday night. Great customer service!
This is why I do not recommend people put CM7 on the card and then keep swapping between stock and CM7. Eventually the slot will fail. Mine failed and I never remove the card.

patruns said:
Mine did this in the middle of a nightly update. I had to physically hold the card in while I wiped it and restored to stock so that I could get it replaced under warranty. Called B&N on a Monday night a new refurb by Wednesday night. Great customer service!
This is why I do not recommend people put CM7 on the card and then keep swapping between stock and CM7. Eventually the slot will fail. Mine failed and I never remove the card.
Click to expand...
Click to collapse
I know it's an option but it would be great if you can write up a little up-to-date instructions and post in one of those HOW_TO thread such this one: http://forum.xda-developers.com/showthread.php?t=1303843
It would be great help for others.

I thought about that, but the how to restore to stock thread pretty well covers it other than you have to physically hold the card in during the entire process....
http://forum.xda-developers.com/showthread.php?t=914690&page=29

This is why I do not recommend people put CM7 on the card and then keep swapping between stock and CM7. Eventually the slot will fail. Mine failed and I never remove the card.
Click to expand...
Click to collapse
What do you mean by this? At first I thought you meant swapping as in taking out/putting in the sdcard all the time, but then you say mine failed and I never remove the card.
I have been running off the sdcard for a long time and only just recently (to update to 7.1) had a need to remove the card.
I could see constantly swapping the card out, but I don't see the effect of simply running off it.

sark666 said:
What do you mean by this? At first I thought you meant swapping as in taking out/putting in the sdcard all the time, but then you say mine failed and I never remove the card.
I have been running off the sdcard for a long time and only just recently (to update to 7.1) had a need to remove the card.
I could see constantly swapping the card out, but I don't see the effect of simply running off it.
Click to expand...
Click to collapse
I meant swapping the card in and out. In my case, it was more severe as the slot failed and I never touch the card. Just trying to emphasize the point that the slot is fragile.

Micro Sim Card Doesn't Pop in Correctly?

So I have the ATRIX HD and I love it, but there's one thing that's annoying me. I can't get my sim card to stay in place within the slot, it doesn't click in like the microsd card does. I'm not sure if that's what's supposed to happen but I've just been closing the door to the slot area and it seem to stay in place and my phone radio works. Anyone have any ideas or pics they could post as to how theirs looks? Thanks!!!
Sent from my MB886 using Tapatalk 2

The sales rep at the store had the same issue, but he eventually got it to lock in. I haven't removed it to try myself, but it looked like he had to push it in a little further than the microSD to make it work.
Edit: just tried it and I had to use a key (just what I had laying next to me) to get it to go in and click.

Sales rep had the same issue inserting my sim. She actually chipped her nail getting it in. Guess it was her first AHD
Sent from my Atix HD using xda premium

Same Problem
Me and my friend bought (both) ATRIX HDs on eBay.com (NEW IN BOX).. and when they arrived we faced the same problem, Micro SIMs does not Pop in correctly on both phones. Friend tried to force SIM to pop in and stay there but he broke spiral(or how it is called) inside and it will not Pop out without same help... On the other hand I can not Lock in my micro SIM and it pops out.. I have to force and close the cover so that SIM stays IN...
P.S. SIMs work on both phones..(even though it is not locked in my phone, but I am afraid not to break cover as sim pushes cover hard from inside

TokoVergil said:
Me and my friend bought (both) ATRIX HDs on eBay.com (NEW IN BOX).. and when they arrived we faced the same problem, Micro SIMs does not Pop in correctly on both phones. Friend tried to force SIM to pop in and stay there but he broke spiral(or how it is called) inside and it will not Pop out without same help... On the other hand I can not Lock in my micro SIM and it pops out.. I have to force and close the cover so that SIM stays IN...
P.S. SIMs work on both phones..(even though it is not locked in my phone, but I am afraid not to break cover as sim pushes cover hard from inside
Click to expand...
Click to collapse
SOOoo,,
I have the same problem here, idk if i break it or not; I tried to remove my sim card from the tray but i couldnt!!!
when I press it doesnt pop out and i cant take it off :crying::crying:
does anyone have any idea how to remove it?

Did you put it in upside down? Or in the micro sim slot?
Sent from my PACMAN MATRIX HD MAXX

deeje00 said:
Did you put it in upside down? Or in the micro sim slot?
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
no, i put it there like couple months ago and the micro sim card just works fine, no problems.
I am planning to change my career and I tried to remove it, but it seems like it is stcuked there and it doesnt pop out right now ://

Strange, mine pops in and out with minimal effort.
Sent from my MB886 using xda app-developers app

[Q] My Micro SD won't click in the micro SD slot

Hey Everyone,
I just got my Xperia T & I know it has enough memory of 16gb on the phone but I just wanted to slap in a Class 10 8gb card that I had as well & my card doesn't click into the slot. Man I don't want to be opening a new phone to fix this. Anyone else have this issue or know of a fix?
Thanks
Moe

farufas said:
Hey Everyone,
I just got my Xperia T & I know it has enough memory of 16gb on the phone but I just wanted to slap in a Class 10 8gb card that I had as well & my card doesn't click into the slot. Man I don't want to be opening a new phone to fix this. Anyone else have this issue or know of a fix?
Thanks
Moe
Click to expand...
Click to collapse
have you got the right size card, and are you putting it in the right way round?

gregbradley said:
have you got the right size card, and are you putting it in the right way round?
Click to expand...
Click to collapse
Yup there is only one way you can put it & it says microSD by the slot which I have, i've got a Samsung microSD.

farufas said:
Yup there is only one way you can put it & it says microSD by the slot which I have, i've got a Samsung microSD.
Click to expand...
Click to collapse
The card should go in with the writting towards the back of the phone and and the wobbly edge towards the bottom of the phone.
I have a samsung 32gb class 10 and it fits in fine. With this card the writting is upsaide when i put it in

That's how it is dude, like I said the card goes into the slot but just doesn't stay it pushes out. The micro sim clicks in fine?

farufas said:
That's how it is dude, like I said the card goes into the slot but just doesn't stay it pushes out. The micro sim clicks in fine?
Click to expand...
Click to collapse
Not sure what it is then....you do have to push it in quite far....you can only just see it when its in properly

gregbradley said:
Not sure what it is then....you do have to push it in quite far....you can only just see it when its in properly
Click to expand...
Click to collapse
tried that dude & it still didn't work so didn't want to break anything inside by putting more force into it. Anyway thanks for your help will try getting it checked out and if it won't get fixed last option is to sell this one and i guess get another one.

[Q] Sim card Error

Im getting the sim card error after the phone gets hot,is anyone else experiencing this?

Re seat your SIM.
Sent from my HTCONE using Tapatalk 2

I was getting that error randomly, brought it to sprint and they said they couldn't find anything wrong with my phone or the SIM card but that I'm not the only one that's had the issue and if it happens again after taking it out and putting it back in that putting a piece of tape in there to hold the SIM card in has worked for other people
Sent from my HTCONE using Tapatalk 2

JHoggAMLH said:
I was getting that error randomly, brought it to sprint and they said they couldn't find anything wrong with my phone or the SIM card but that I'm not the only one that's had the issue and if it happens again after taking it out and putting it back in that putting a piece of tape in there to hold the SIM card in has worked for other people
Click to expand...
Click to collapse
Damn.
Anyway, it would help if we could see a screen shot of what error you are talking about. There are several going around this forum, each with a different solution.

sauprankul said:
Damn.
Anyway, it would help if we could see a screen shot of what error you are talking about. There are several going around this forum, each with a different solution.
Click to expand...
Click to collapse
Here is my error, it has shown up once a day for the past 3 or 4 days and goes away after a reboot. I have had my phone for 2 months and this only started showing a few days ago.
Sent from my jacked HTC One!!

JHoggAMLH said:
I was getting that error randomly, brought it to sprint and they said they couldn't find anything wrong with my phone or the SIM card but that I'm not the only one that's had the issue and if it happens again after taking it out and putting it back in that putting a piece of tape in there to hold the SIM card in has worked for other people
Sent from my HTCONE using Tapatalk 2
Click to expand...
Click to collapse
Yes do this. Also wipe the gold part clean my wife's had a big oily finger print on it. Just put a small piece of scotch tape on top of card and reinstall.
Sent from my HTCONE using xda premium

Thanks for all the responeses, i get the same errors as celder187. But mine only does it when it gets hot no other time,was just wondering if it was a heat issue with the Sim card. i reboot phone and it goes away.

boosted125 said:
Thanks for all the responeses, i get the same errors as celder187. But mine only does it when it gets hot no other time,was just wondering if it was a heat issue with the Sim card. i reboot phone and it goes away.
Click to expand...
Click to collapse
Lol, this whole time I didn't know you could remove the sim card. I removed it and cleaned it then put it back. I haven't had the error pop up since

I started getting the same error after I flashed the s-off firmware zip. I seem to get it when I lose signal.

Missing SIM tray question

Okay so I bought this phone from a third party and it is missing the tray for the SIM but works fine without it.....so do I really need the tray?
Sent from my C6906 using xda app-developers app

No, you don't if all working fine. The tray is meant for pull out the sim easy because of it. Now probably you have to use some little tool or long nails.

eclyptos said:
No, you don't if all working fine. The tray is meant for pull out the sim easy because of it. Now probably you have to use some little tool or long nails.
Click to expand...
Click to collapse
Thanks I found one the store pulled it from their test unit but I had to donate to 5 bucks to a charity but my phone works better with lte now
Sent from my C6906 using xda app-developers app

eclyptos said:
No, you don't if all working fine. The tray is meant for pull out the sim easy because of it. Now probably you have to use some little tool or long nails.
Click to expand...
Click to collapse
In my experience, it's harder to keep the sim in the right place without the tray. I would not be happy if I lost mine.

xasbo said:
In my experience, it's harder to keep the sim in the right place without the tray. I would not be happy if I lost mine.
Click to expand...
Click to collapse
I will not be happy too but actually in Z1 it's very tiny so the sim will not go anywhere.

It seems the card tray and the card flaps are easy to lose. I lost my USB flaps before. And have to buy a set of flaps.