I9300 HD Voice - AMR-WB - ENABLED - Galaxy S III Android Development

HD Voice - AMR-WB -
supports AMR-WB as a codec, but IF YOU can't find if it is activated by default
copy the file to :root/system/csc
Tested on :
InsertCoin 4.1.1 / OmegaRom / 4.1.1 and 4.1.2
for me it worked
to check in Phone tap *#197328640# -> [8]WB-AMR status -
and to tell the diference http://www.dialogic.com/en/solutions/mobile-vas/hd-voice.aspx
P.S. - the network provider suport HD Voice
if not --

This is not development its just a ripped CSC .
jje

czar22 said:
HD Voice - AMR-WB -
supports AMR-WB as a codec, but IF YOU can't find if it is activated by default
copy the file to :root/system/csc
Tested on :
InsertCoin 4.1.1 / OmegaRom / 4.1.1 and 4.1.2
for me it worked
to check in Phone tap *#197328640# -> [8]WB-AMR status -
and to tell the diference http://www.dialogic.com/en/solutions/mobile-vas/hd-voice.aspx
P.S. - the network provider suport HD Voice
if not --
Click to expand...
Click to collapse
thanks mate .... change permission ????
p.d : excuse me my english is very little

not work on my OmegaRom 32 / 4.1.1 T-Mobile Poland

ciopik said:
not work on my OmegaRom 32 / 4.1.1 T-Mobile Poland
Click to expand...
Click to collapse
try to change permissions for the files after you copy them

czar22 said:
try to change permissions for the files after you copy them
Click to expand...
Click to collapse
RW - R - R for the 4 files ? thaks

I'm on Orange Romania network but the ROM CSC is for Morocco. Will this work with this combination? Do I have to match the CSC with my home network sim card?
Thank you.

starbucks2010 said:
I'm on Orange Romania network but the ROM CSC is for Morocco. Will this work with this combination? Do I have to match the CSC with my home network sim card?
Thank you.
Click to expand...
Click to collapse
yes
and i assume that you are on InsertCoin
it will work
tested
read #1 post

No, I'm on crDroid v6.5. Still not working.

no work for me .

try to put it on your ROM - > and flash it ..
for me it worked
it is working on InsertCoin 3.0.0

tested on ARHD 16 not working!

Tested on sotmax v8 and it's not working tried with and without changing permissions and it doesn't work
I know my carrier (3UK) supports HD voice as I had it on my stock ROM

I also Know that Orange supports HD voice but I cannot activate it this way. It could be a ROM problem. I'm on FoxHound 1.5 and is not working.
Can you give us more details about your configuration: what CSC you have on the phone, did you matched the phone CSC with the CSC inside the modded files, etc.
Thank you.

starbucks2010 said:
I also Know that Orange supports HD voice but I cannot activate it this way. It could be a ROM problem. I'm on FoxHound 1.5 and is not working.
Can you give us more details about your configuration: what CSC you have on the phone, did you matched the phone CSC with the CSC inside the modded files, etc.
Thank you.
Click to expand...
Click to collapse
sorry but now i got a Note II
the simple way to do this
1. flash a STOCK Rom - !!!! = for the region ( for me is Romania )
2. get root / extract the CSC files [folder ] + csc file in root/system /CSCVersion.txt
3. put the CSC file to the ROM you whant to flash
4. flash the new ROM
You can check to see if AMR-WB is enabled by dialling: *#197328640#
if you flash a modem after - your amr-wb will not work

not working

enigma1981 said:
Tested on sotmax v8 and it's not working tried with and without changing permissions and it doesn't work
I know my carrier (3UK) supports HD voice as I had it on my stock ROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2048228&

Anyone have a working CWM file that can enable AMR-WB (HD-Voice) on Three?

Hey...Sotmax v12 HdVoice Version 3 Uk works perfect....
Full wipe required...http://forum.xda-developers.com/showthread.php?t=1944035

Not work for me. Vodafone italy.
Any suggestion?

Related

[ROM] [XXEMR2] 4.1.2 JB With AMR-WB (HD Voice) Support on 3Three [9Feb]

Recently a few vendors in the UK have been doing some really good deals on the Galaxy S3 on the 3 network. Because of this I have just recently picked up one.
The issue with this is, because I didn't get the phone from Three it didn't come with their branded firmware. Normally this is a good thing but in this case it wasn't. The none branded firmware hasn't got 3's modem or CSC. That meant that AMR-WB wasn't enabled and the signal strength was pretty poor.
You can check to see if AMR-WB is enabled by dialling: *#197328640#
And selecting option 8
Anyway because of this I decided to roll my own ROM.
The ROM is based on the Official I9300XXEMR2 (4.1.2) Firmware and AMR-WB is confirmed working with Three networks in Europe.
You will need to be rooted and have CWM installed to be able to flash the ROM. Due to a recent exploit that has been found this can be done really easily.
All you need to do is side load the ExynosAbuse APK then run it. This will install the SU app giving you root access to the device.
Once SU is installed go to the Play Store and install ROM Manager . This app allows you to install CWM so you can flash the ROM.
Click to expand...
Click to collapse
Changes made to the ROM:
I have added AMR-WB support for the 3 Network (ripped from the Official I9300XXDLJ1 3Three branded firmware)
Fully DeOdexed
Rooted
Busybox
GoogleEars
PopUpBrowser
Unbranded
Added Beats Audio *edited* for S3 + DPSManager.
Added Bravia 2 engine
Added back GenieWidget with transparent Widgets.
Added back Flash support (ripped from the Official ICS firmware)
Built in Adblocker
Faster AGPS lockons
Faster 3G speeds
Edited build.prop to include Image & Video improvements, + many other improvements.
Scripts for Zipalign, Sqlite Otimize and Permissions Fix ect. added to init.d
Removed Video Hub, Music hub (Trialware) and ChatOn
Fackebook, Twitter, Flipboard and WhatsApp are stored in data so they are easy to uninstall.
I9300XXEMR2-3Three.torrent - 745.8 MB
MD5: ab15ec3259cf127d215ba2f881d9c9c3
As the Torrent is using a Web seed please use µTorrent if you are on Windows/Android or Deluge if you are using Linux/Mac to get the best download speeds.​
Click to expand...
Click to collapse
Flashable CWM.zips
This will enable HD voice for any JB ROM for the 3 Network.
AMR-WB-Enabler-3Three-V3.zip
​
Click to expand...
Click to collapse
Pinguy-Mods.2.9.zip​
Click to expand...
Click to collapse
Older Versions
II9300XXELL5-3Three-V2.3.1.torrent - 747.2 MB
MD5: 6c830e9243215b135bd0e25c3b5f803e​
Click to expand...
Click to collapse
Credits:
Kernel - AndiP
CAM-MOD - hyperX-
Android Kitchen - dsixda
Crt off animation - Sorg
Extended Power Menu - mgn2o
Multi windows with unlimited apps - Lidroid
Call recording - wanam
InkEffect on lockscreen (Note 2 thingy) - mythtrandyr
Install Script - roalex
How can you AMR-WB HD voice for different countries? Is it possible?
It is the first time I notice this!
Thank you
lolos said:
How can you AMR-WB HD voice for different countries? Is it possible?
It is the first time I notice this!
Thank you
Click to expand...
Click to collapse
You need to rip out the original modem, csc and T9DB from the firmware that came with the phone, then flash that back onto the custom ROM.
If you download the Branded Stock firmware you will find the CSC and T9DB in the cache.img
But this ROM will work in other countries on the 3 network.
pinguy1982 said:
Recently a few vendors in the UK have been doing some really good deals on the Galaxy S3 on the 3 network. Because of this I have just recently picked up one.
The issue with this is, because I didn't get the phone from Three it didn't come with their branded firmware. Normally this is a good thing but in this case it wasn't. The none branded firmware hasn't got 3's modem or CSC. That meant that AMR-WB wasn't enabled and the signal strength was pretty poor.
You can check to see if AMR-WB is enabled by dialling: *#197328640#
And selecting option 8
Anyway because of this I decided to roll my own ROM.
The ROM is based on the Official Samsung 4.1.2 by roalex.
Changes made to the ROM:
I have added AMR-WB support for the 3 Network
Added Beats Audio and DSPManager
Added Bavia engine
Added back GenieWidget
Added back Flash support.
Built in Adblocker
Faster AGPS lockons
Faster 3G speeds
I also replaced the kernel with AndiP fantastic Boeffla-Kernel 2.21.
Flash with CWM.
Download
MD5: 5d86810d9d8dcfb0712ea54e66ee164f​
Click to expand...
Click to collapse
wish i could download it but it keeps failing
dave6018 said:
wish i could download it but it keeps failing
Click to expand...
Click to collapse
The server may of been under heavy load when you tried downloading it. If it keeps becoming an issue I could get a torrent going.
#EDIT
Got a torrent up and running now. As its using a Web seed use µTorrent on Windows or Deluge for Linux to get the best speeds.
Updated ROM to the XELL5 Firmware.
XELL5 V2
Fixed the bug with BBC iPlayer.
I9300XXELL5-3Three-V3.zip
Updated AndiP Kernel to 2.3 stable and fixed bluetooth.
Tnx MAN look awsome
does it need wipe or with out wipe
does it need wipe or with out wipe
Just Downloading the torrent now will let you know the results!
Looks good!
this rom is awsome but there is bug in notification panel how can i fix it help plz
No ypu don't need to wipe.
If the notification text is hardcoded as black in the app there is nothing that can be done.
I have made no changes to the theme.
Sent from my GT-I9300 using Tapatalk 2
Can confirm this rom is all running perfect , seems more stable than my old Stock rom!
Well done Pinguy!
tnx for ur reply will there will be more update to this rom or V3 is the final one
Great work, rom working flawlessly so far. Signal strength has improved. Keep it up
Sent from my GT-I9300 using xda app-developers app
rehmankhan101 said:
tnx for ur reply will there will be more update to this rom or V3 is the final one
Click to expand...
Click to collapse
AndiP is doing some cool changes with the new kernel including a couple of apps to change the audio and kernel settings.
Once its released as a stable release and the samsung sources are released for the hdmi, I will do another release.
I will also update the new firmwares (4.2 etc.) So they include the needed 3 network files.
So I will keep the ROM updated as needed.
But for now V3 is the final and won't be updated for awhile.
Sent from my GT-I9300 using Tapatalk 2
great tnx Man i will follow this thread for up coming updates keep up ur good work
Perfect

[PORT][ROM] Samsung S4 Google Edition Aug 10

Standard Disclaimer
Code:
/* I'm Not responsible for anything that happens to your device. */
[
I will start adding features people ask for after the ROM is STABLE. I don't want a lot of touchwiz crap messing this up,
But, I will try to bring over SBeam and Airview . The reason I chose those is stock android accepts these features and I don't see
them as "touchwiz" property.
Feel Free to use this as a base ROM , just please give credits .
CHANGE LOG NEAR BOTTOM. AS ALWAYS HAVE FUN AND CONTRIBUTE . If updating you may have to wipe cache and dalvik.
BEST RESULTS SEEMS TO BE FROM TOUCHWIZ. Not necessary but just throwing it out there.
PLEASE PROVIDE LOGCATS FOR ANY ISSUE THIS WILL HELP OUT A LOT
Working
+ Data 3G
+ Wifi
+ Phone
+ Camera
+ Video Recording
+ Sms
+ MMS
+ LTE & LTE Signal Bars
NOT WORKING
WALLET
To come if I have time.
Samsung Camera ( Not included in new build will be back in next one )
All pictures to SDCARD even google synced
SBeam
AirView
Maybe More
Stable v1-8-10-13
Fixed wallet
Beta-v1.1 8-10-13
Wallet Fixed ( Thanks Dubbsy )
More a lot more Under the hood fixes and edits
THIS IS BETA STILL
Change Log 8-9-13
Completely reworked framework*jars
About phone shows LTE while on CDMA/LTE mode.
Gets all phone info correctly now.
No longer uses DS Network
Change Log 8-2-13
Added Samsung Camera to this build
Data related fixes .
Framework edits
Note the issues please
Issues:
Some features don't completely work yet. ( Best Shot )
However I will be fixing this asap.
Change Log 7-18-13
Fixed LTE
Fixed LTE Signal Bars with color.
Fixed Data switching
Fixed Network Now uses eHrpd ( Sprint )
Removed CSC
Added missing libs
Fixed Framework1&2.jar
Probably more just can't remember right know.
Change Log 7-16-13
Fixed Phone
more attempts to fix LTE
Change Log 7-14-13
NOTE YOU'LL SEE 1x FOR A MOMENT THEN IT GOES AWAY . IF FOR SOME REASON IT DOESN'T REBOOT AND YOU'll BE GOOD
Fixed MMS
Code cleanup
More attempts to fix LTE ( Please test and provide logcats )
Network improvements
Change log ( This is a test build )
7/13/13
Updated all Modules
Updated to SPL MF9 firmware
Framework.jar and Framework2.jar edits
sc.jar
abt*.jar
added permissions for CMDA
Updated Sales Code (CSC ) To be USA / Sprint
Corrected APNS
Change the following files
Code:
# Bins
bin/mpdecision
# bluetooth firmware
vendor/firmware/bcm2079xB4_firmware.ncd
vendor/firmware/bcm2079xB4_pre_firmware.ncd
vendor/firmware/bcm4335.hcd
vendor/firmware/bcm4335_A0.hcd
vendor/firmware/bcm4335_murata.hcd
vendor/firmware/bcm4335_semco.hcd
# audio
lib/libacdbloader.so
lib/libaudcal.so
lib/libcsd-client.so
etc/firmware/wcd9310/wcd9310_anc.bin
etc/firmware/wcd9310/wcd9310_mbhc.bin
# mmparser extended
lib/libExtendedExtractor.so
lib/libmmparser.so
lib/libmmosal.so
lib/libdivxdrm.so
# GPU
lib/egl/eglsubAndroid.so
lib/egl/libEGL_adreno200.so
lib/egl/libGLESv1_CM_adreno200.so
lib/egl/libGLESv2_adreno200.so
lib/egl/libq3dtools_adreno200.so
lib/libc2d2_z180.so
lib/libc2d2_a3xx.so
lib/libgsl.so
lib/libllvm-a3xx.so
#lib/libllvm-arm.so
lib/libC2D2.so
lib/libOpenVG.so
lib/libOpenCL.so
lib/libsc-a2xx.so
lib/libsc-a3xx.so
etc/firmware/a225p5_pm4.fw
etc/firmware/a225_pfp.fw
etc/firmware/a225_pm4.fw
etc/firmware/a300_pfp.fw
etc/firmware/a300_pm4.fw
etc/firmware/leia_pfp_470.fw
etc/firmware/leia_pm4_470.fw
etc/firmware/vidc_1080p.fw
#etc/firmware/yamato_pfp.fw
#etc/firmware/yamato_pm4.fw
# radio stuff
bin/ds_fmc_appd
bin/efsks
bin/ks
bin/netmgrd
bin/sec-ril
bin/qcks
bin/qmiproxy
bin/qmuxd
bin/rild
bin/rmt_storage
lib/libatparser.so
lib/libcordon.so
lib/libdiag.so
lib/libdsutils.so
lib/libdsi_netctrl.so
lib/libfactoryutil.so
lib/libidl.so
lib/libnetmgr.so
lib/libomission_avoidance.so
lib/libqdi.so
lib/libqdp.so
lib/libqmi.so
lib/libqmiservices.so
lib/libqmi_cci.so
lib/libqmi_common_so.so
lib/libqmi_csi.so
lib/libqmi_encdec.so
lib/libqcci_legacy.so
lib/libqmi_client_qmux.so
lib/libreference-ril.so
lib/libril-qcril-hook-oem.so
lib/libsecril-client.so
lib/libtime_genoff.so
# GPS stuff
lib/libloc_api_v02.so
# sensors
lib/libsensirion_j1.so
lib/libsam.so
lib/hw/sensors.msm8960.so
lib/hw/sensorhubs.msm8960.so
# camera stuff
bin/mm-qcamera-daemon
cameradata/M10MO_SFW.bin
cameradata/RS_M10MO_OL.bin
cameradata/RS_M10MO_OS.bin
cameradata/RS_M10MO_SL.bin
cameradata/RS_M10MO_SS.bin
cameradata/datapattern_420sp.yuv
cameradata/datapattern_front_420sp.yuv
lib/hw/camera.msm8960.so
lib/libchromatix_imx074_default_video.so
lib/libchromatix_imx074_preview.so
lib/libchromatix_imx074_video_hd.so
lib/libchromatix_imx074_zsl.so
lib/libchromatix_imx091_default_video.so
lib/libchromatix_imx091_preview.so
lib/libchromatix_imx091_video_hd.so
lib/libchromatix_mt9e013_default_video.so
lib/libchromatix_mt9e013_preview.so
lib/libchromatix_mt9e013_video_hfr.so
lib/libchromatix_ov2720_default_video.so
lib/libchromatix_ov2720_hfr.so
lib/libchromatix_ov2720_preview.so
lib/libchromatix_ov2720_zsl.so
lib/libchromatix_ov5647_default_video.so
lib/libchromatix_ov5647_preview.so
lib/libchromatix_ov8825_default_video.so
lib/libchromatix_ov8825_preview.so
lib/libchromatix_ov9726_default_video.so
lib/libchromatix_ov9726_preview.so
lib/libchromatix_s5k3l1yx_default_video.so
lib/libchromatix_s5k3l1yx_hfr_120fps.so
lib/libchromatix_s5k3l1yx_hfr_60fps.so
lib/libchromatix_s5k3l1yx_hfr_90fps.so
lib/libchromatix_s5k3l1yx_preview.so
lib/libchromatix_s5k3l1yx_video_hd.so
lib/libchromatix_s5k3l1yx_zsl.so
lib/libchromatix_s5k4e1_default_video.so
lib/libchromatix_s5k4e1_preview.so
lib/libchromatix_s5k6b2yx_pip.so
lib/libchromatix_s5k6b2yx_preview.so
lib/libchromatix_s5k6b2yx_smartstay.so
lib/libchromatix_s5k6b2yx_video.so
lib/libchromatix_s5k6b2yx_vt.so
lib/libchromatix_s5k6b2yx_vt_hd.so
lib/libgemini.so
lib/libimage-jpeg-enc-omx-comp.so
lib/libimage-omx-common.so
lib/libmercury.so
lib/libmmcamera_faceproc.so
lib/libmmcamera_frameproc.so
lib/libmmcamera_hdr_lib.so
lib/libmmcamera_image_stab.so
lib/libmmcamera_imx091.so
lib/libmmcamera_interface.so
lib/libmmcamera_interface2.so
lib/libmmcamera_plugin.so
lib/libmmcamera_statsproc31.so
lib/libmmcamera_wavelet_lib.so
lib/libmmjpeg.so
lib/libmmjpeg_interface.so
lib/libmmmpod.so
lib/libmmstillomx.so
lib/liboemcamera.so
lib/libsecnativefeature.so
lib/libvdis.so
# wifi
etc/wifi/bcmdhd_apsta.bin
etc/wifi/bcmdhd_apsta.bin_a0
etc/wifi/bcmdhd_mfg.bin
etc/wifi/bcmdhd_mfg.bin_a0
etc/wifi/bcmdhd_sta.bin
etc/wifi/bcmdhd_sta.bin_a0
etc/wifi/cred.conf
etc/wifi/nvram_mfg.txt
etc/wifi/nvram_mfg.txt_a0
etc/wifi/nvram_mfg.txt:etc/wifi/nvram_mfg.txt_murata
etc/wifi/nvram_mfg.txt_murata_a0
etc/wifi/nvram_mfg.txt_muratafem1
etc/wifi/nvram_mfg.txt_muratafem2
etc/wifi/nvram_mfg.txt_semco3rd
etc/wifi/nvram_mfg.txt_semco3rd_a0
etc/wifi/nvram_mfg.txt_semcosh
etc/wifi/nvram_net.txt
etc/wifi/nvram_net.txt_a0
etc/wifi/nvram_net.txt:etc/wifi/nvram_net.txt_murata
etc/wifi/nvram_net.txt_murata_a0
etc/wifi/nvram_net.txt_muratafem1
etc/wifi/nvram_net.txt_muratafem2
etc/wifi/nvram_net.txt_semco3rd
etc/wifi/nvram_net.txt_semco3rd_a0
etc/wifi/nvram_net.txt_semcosh
etc/wifi/wpa_supplicant.conf
lib/libqc-opt.so
# drm
bin/qseecomd
lib/libdrmdecrypt.so
lib/libdrmfs.so
lib/libdrmtime.so
lib/libhdcp2.so
lib/libQSEEComAPI.so
lib/libWVStreamControlAPI_L1.so
lib/libwvm.so
added
libnetcmdiface.so
Change log
7/3/13
Updated kernel ( Thanks Ktoonz)
Think I fixed 4G ( without apn restore )
made 3G more stable ( no more having to do Airplane mode and having it say Empty in status and should have stronger 3G service)
Added Samsung Camera ( all Features )
Fixed missing libs and binaries.
Added correct apn throughout apps and apn_editing
a few attempts to correct mms ( almost there ) .
wallet is still broke ( I believe know why though ). key and permissions issue
Change log
7/1/13
Roaming indicator fixed Now recognizes Sprint as network
LTE should be working ( nope )
GPS working
MMS working ( nope )
Install Instructions :
Download Rom
Download A Kernel.
Put ROM and Kernel on SDCard
Wipe / Factory Reset
install ROM
INSTALL A DIFFERENT KERNEL TO HAVE WORKING WIFI
​----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​Stable v1
Stable-v1
Beta-Version-1.1
Aug-10-13
BETA-Version-1
Beta-v1-8-9-13
Stable PLEASE NOTE RANDOM REBOOTS ARE KERNEL ISSUES SO PLEASE SWITCH KERNELS BEFORE POSTING ISSUE.
Stable-Jul-18-13
Google-Edition-Samsung-Camera
Kernel
agat63-thread
flux
Kernel ( This one is known to cause reboots )
ktoonsez-thread
Old Builds:
Old
July-16-13
Old
July-13-13
Old Build
JULY_3_2013
Old Build ( LTE Test build )
Second-LTE-Test-Build-7-14-13
Old Build ( Mostly Stable )
July-7-14
Trying to DL now. Waiting for access. Thanks.
Sent from my SPH-L720 using Tapatalk 4 Beta
blackhand901 said:
Trying to DL now. Waiting for access. Thanks.
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Download should be working now
Thanks. Will update.
Sent from my SPH-L720 using Tapatalk 4 Beta
B-dub25 said:
Download should be working now
Click to expand...
Click to collapse
I'll give this a shot after I finish with the version Dubbsy over in the verizon forum did for me.
to fix the roaming indicator, you need to import cm eri.xml file in the overlay.
I'm not getting any data at all. Are you on MDL? I tried to connect to Wi-Fi and disconnect and no luck.
boydefecto said:
I'm not getting any data at all. Are you on MDL? I tried to connect to Wi-Fi and disconnect and no luck.
Click to expand...
Click to collapse
Have you tried HTC Lte from the market? I used it to change it to LTE/CDMA auto prl
Sent from my SCH-I545 using xda premium
boydefecto said:
I'm not getting any data at all. Are you on MDL? I tried to connect to Wi-Fi and disconnect and no luck.
Click to expand...
Click to collapse
Yes I'm on MDL , but don't think that should matter .
Just flashed this rom from a CM nightly. I don't get any service whatsoever but everything else seems to be working fine.
lost my radio completely, came from MDL, any idea whats up?
ijrod21i said:
Just flashed this rom. I don't get any service whatsoever but everything else seems to be working fine.
Click to expand...
Click to collapse
If you go to mobile networks does it keep reverting back to wcdma preferred? Try that app I mentioned a few posts back, that's what the Verizon thread says to use and it worked for me
Sent from my SCH-I545 using xda premium
Nice
Sent from my LG-LS970 using xda app-developers app
dcaplinger76 said:
If you go to mobile networks does it keep reverting back to wcdma preferred? Try that app I mentioned a few posts back, that's what the Verizon thread says to use and it worked for me
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
When I download the LTE OnOff app and go to "Set preferred network type:" no matter which option I select, the box just says "Unknown" when I select it.
ijrod21i said:
When I download the LTE OnOff app and go to "Set preferred network type:" no matter which option I select, the box just says "Unknown" when I select it.
Click to expand...
Click to collapse
same
williamvito said:
lost my radio completely, came from MDL, any idea whats up?
Click to expand...
Click to collapse
Settings > data > Network mode . Select CDMA/lte. CDMA subscriptions auto
B-dub25 said:
Settings > data > Network mode . Select CDMA/lte. CDMA subscriptions auto
Click to expand...
Click to collapse
I had those settings but baseband said unknown
Sent from my SPH-L720 using Tapatalk 4 Beta
B-dub25 said:
Settings > data > Network mode . Select CDMA/lte. CDMA subscriptions auto
Click to expand...
Click to collapse
already on lte/cdma cdma subscription options are only 2 ruim/sim and nv
jsmcmahon89 said:
I had those settings but baseband said unknown
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Same here... The OP shows a picture with MDL baseband how was that achieved?
ijrod21i said:
When I download the LTE OnOff app and go to "Set preferred network type:" no matter which option I select, the box just says "Unknown" when I select it.
Click to expand...
Click to collapse
Maybe it work for me because I flashed a different kernel.
Sent from my SCH-I545 using xda premium

[GT-I9192]-[ROM][Stopped][Odin]Galaxy S4 Mini Duos 4.2.2 JB TouchWiz 18/07/2014

/!\ This Rom works only for GalaxyS4 Mini Duos I9192 /!\
/!\ If u have Knox bootloader active ( Word "Knox" in Download mode ) DO NOT flash this, it will Void Knox Warranty 0x1 /!\
/!\ Flash it at your own Risk /!\
/* Your warranty is now void.. LOL I guess you knew it already.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone*
* bootloops and alarm does not go off. Please do some research if you have any *
* concerns about features included in my kernel before using it! YOU and only*
* YOU are choosing to make these modifications.
*/
- I9192XXUBML4 PDA and Modem ( From Russian firmware La Fleur edition ) Also available to Ukraine/Kazakhstan/Uzbekistan .
- Krait retention power saving state added
- I9195OXXBML1 Multi CSC. U can change your CSC code with Galaxy CSC Changer ( Will wipe your data ) from :
Code:
BGL - Bulgaria
ERO - Bosnia and Herzegovina
EUR - Greece
NEE - Finland ( Nordic countries )
PRO - Belgium / Luxemburg
SEE - South East Europe
SMO - Serbia
TPH - Portugal
TSR - Serbia
XEF - France
XEO - Poland
CMF - Macedonia
CYO - Cyprus
ETL - Czech Republic
MSR - Serbia ( Telenor )
ORX - Slovakia
PHE - Spain
ROM - Romania
SEB - Baltic
SIO - Slovenia
TOP - Serbia / Montenegro
TRA - Croatia
TWO - Croatia ( Two/Tele2 )
XEH - Hungary
XSK - Slovakia
- Prerooted with SuperSU 1.91 credits to @Chainfire ( u can unroot from SuperSU app ) only su and Superuser.apk added no daemons or anything else
- Removed Knox apps & bootloader, rest stock
- My custom Kernel included
Download: v1
I9192XXUBML4_I9195OXXBML1_I9192XXUBML4_SILVIU.tar.rar 872.1 MB
https://mega.co.nz/#!1clUjKiT!PMIPVyiborrR5kU-q4nm1x5ji2V38zd5oFFLnZwD1yw
Download: v2
I9192XXUBNB1_I9195OXXBML1_I9192XXUBNB1_SILVIU.tar.rar 885.2 MB
https://mega.co.nz/#!NIMkBLzb!7CVKx5TltrbApQ2suovLwqBE8zEv2O9Rv6MmS1Nm69g
Mirror for v2 http://www.mediafire.com/download/l...BNB1_I9195OXXBML1_I9192XXUBNB1_SILVIU.tar.rar
Download: v2.1
I9192XXUBNC1_I9195OXXBML1_I9192XXUBNC1_SILVIU.tar.rar 885.3 MB
https://mega.co.nz/#!5MNTwB5Z!biris4zIPsU2-INJ02nmM8lHdxvHd8yC5Ij-MqgokUk
Download: v2.2
I9192XXUBND2_I9195OXXBML1_I9192XXUBND2_SILVIU.tar.rar 822.8 MB
https://mega.co.nz/#!lBt0kYyB!7z-7fmcaUXmW_ZZ4BtqqyF8C8_-ai83g6kTANVwKp94
Download v2.3 Final
I9192XXUBND2_I9195OXXBML1_I9192XXUBND2_SILVIUv2.tar.rar 884.2 MB
https://mega.co.nz/#!NYcR0CjQ!eKLZSLjF5jTlmIcW-3PcCvQd8hHhNPVrDHj9hUOowhE
P.S. For now i will stop my development, if i find the motivation to try to work on KitKat i will resume
P.S. Nothing fancy ! Only an working rom
No "bloatware" removed u can do that on your own , no mods
Installation instructions:
Download rom file to your PC
Unpack it and flash as any stock rom with Odin 3.09/ Odin 3.07
If your Baseband does not get updated reflash again !
Wipe data/Factory reset is not needed but recommended
Changelog:
Code:
[B][COLOR="Blue"]v1[/COLOR][/B] - Initial Release based on I9192XXUBML4
[B][COLOR="blue"]v2[/COLOR][/B] - Update base to I9192XXUBNB1 ( Black edition )
Updated SuperSU v1.93
Transparent AccuWeatherWidget
Removed bloat from hidden partition
[B][COLOR="blue"]v2.1[/COLOR][/B] Update base to I9192XXUBNC1 - minor update
[B][COLOR="blue"]v2.2[/COLOR][/B] Based on I9192XXUBND2 Changelist 2634683
- Updated SuperSU v1.94
- Removed small amount of bloat:
Books.apk
ChatON_MARKET.apk
Dropbox.apk
DropboxOOBE.apk
Flipboard.apk
GearManagerStub.apk
GoogleDrive.apk
Hangouts.apk
Magazines.apk
Music2.apk
PlusOne.apk
PlayGames.apk
TripAdvisor.apk
[B][COLOR="blue"]v2.3 Final ( Project stopped for now )[/COLOR][/B] Based on I9192XXUBND2 Changelist 2634683
- Updated SuperSU v2.01
- Stopped removing previous bloat ( it was causing more harm then good, u can delete what u want but i saw more battery usage, more ram used when i deleted bloat then without )
- 2 small build.prop tweaks ro.ril.disable.power.collapse=0 / pm.sleep_mode=1
reserved
SilviuMik said:
reserved
Click to expand...
Click to collapse
cant you put external to internal memory swap feature into gt-i9192 and a transperant accuweather or could you please do it as a mod to this rom ?
hi
hi SilviuMik
1)have any tweaks in your rom? build.prop tweaks,zipalign,...?
2)blotware removed in your rom?
3)my s4(i9192) very laggy,and Front and rear camera, 2 seconds it takes to be moved in stock rom,how is your rom?
sorry my bad engish
Are there any differences comparing to this ROM: http://forum.xda-developers.com/showpost.php?p=49209925&postcount=43 or is it exactly the same ROM?
Regards.
longu said:
Are there any differences comparing to this ROM: http://forum.xda-developers.com/showpost.php?p=49209925&postcount=43 or is it exactly the same ROM?
Regards.
Click to expand...
Click to collapse
Same just that some people asked me to make a thread about it
Well, is freshed compiled with latest SuperSU
No mods, no zipalign no nothing
Works verry good like so
How come I missed this thread? :silly:
How is the battery life of this ROM on 3G?
SandeepEmekar said:
How come I missed this thread? :silly:
How is the battery life of this ROM on 3G?
Click to expand...
Click to collapse
I usually keep my phone on 2g so I can't answer u. Maybe someone else can
AOSP please
Sent from my Galaxy S4 Mini GT-I9192
arabic support
sorry for my noob question do i have to make full wipe or reset the phone
and dose it have Arabic language العربية
many thanks
yosry said:
sorry for my noob question do i have to make full wipe or reset the phone
and dose it have Arabic language العربية
many thanks
Click to expand...
Click to collapse
Yes it does have. Not needed but recomended
SilviuMik said:
Yes it does have. Not needed but recomended
Click to expand...
Click to collapse
many thanks i got it installed can u tell me what is new in this rom from ur previous one
yosry said:
many thanks i got it installed can u tell me what is new in this rom from ur previous one
Click to expand...
Click to collapse
Which previous one ? If u mean the one i posted in my kernel thread then not much ... before it was based on Ukraine rom, and now on Russia La fleur version, updated ramdisk and updated SuperSu and su, removed la fleur apps / cache
Other then that, nothing
I will make a new version when some XXU* ( european ) version will come from samsung
Info required mate
SilviuMik said:
Which previous one ? If u mean the one i posted in my kernel thread then not much ... before it was based on Ukraine rom, and now on Russia La fleur version, updated ramdisk and updated SuperSu and su, removed la fleur apps / cache
Other then that, nothing
I will make a new version when some XXU* ( european ) version will come from samsung
Click to expand...
Click to collapse
SilviuMik, I have I9192 s4 mini duos from India, i made custom rom using kitchen, every thing works fine i am able to install without any issue using cwm recovery, only issue is no base-band and network related things like bluetooth wifi display toggle working.. i have de-odex, zipalined all apks and added few mods.. every thing works perfect. only network not visible.also i tried to flash back the modem.img which i took backup before flashing my custom rom. still it dont show up. I have made my cwm backup so when restored all works back without any issue. so any thought or input to make network work on the custom rom i made. mine is knox boot loader 0x0 even after root and installed kernel which c0bain created one for I9192, and Philz touch recovery all works fine.
I am on I9192DDU1BML1 stock rom with all the boalt wares removed. any one looking for email app for your office exchange emails without pin to un lock the screen i have it. i have used the same methode which i did in my S2.
---------- Post added at 12:45 PM ---------- Previous post was at 12:31 PM ----------
itsme12345 said:
SilviuMik, I have I9192 s4 mini duos from India, i made custom rom using kitchen, every thing works fine i am able to install without any issue using cwm recovery, only issue is no base-band and network related things like bluetooth wifi display toggle working.. i have de-odex, zipalined all apks and added few mods.. every thing works perfect. only network not visible.also i tried to flash back the modem.img which i took backup before flashing my custom rom. still it dont show up. I have made my cwm backup so when restored all works back without any issue. so any thought or input to make network work on the custom rom i made. mine is knox boot loader 0x0 even after root and installed kernel which c0bain created one for I9192, and Philz touch recovery all works fine.
I am on I9192DDU1BML1 stock rom with all the boalt wares removed. any one looking for email app for your office exchange emails without pin to un lock the screen i have it. i have used the same methode which i did in my S2.
Click to expand...
Click to collapse
Also one more thing SilviuMik do you have Android PIT file so that i will try to flash a rom without on Knox boot loader and then install the BML1 without boot loader as per one of the doc to remove it from stock rom .
itsme12345 said:
.
Click to expand...
Click to collapse
Does your baseband get updated when u flash it with Odin ?
Take care usually u need to flash it 2 3 times
It also sometimes depends on what tz.mbn u used in combo with NON-HLOS
Try to extract modem from stock firmware and tar + md5 it and flash it 2 3 times with Odin. Then your wifi should work
Let me know how it goes
i am very happy to see more rooms for the DUOS hope will be a lot more in the future....thx man
SilviuMik said:
Does your baseband get updated when u flash it with Odin ?
Take care usually u need to flash it 2 3 times
It also sometimes depends on what tz.mbn u used in combo with NON-HLOS
Try to extract modem from stock firmware and tar + md5 it and flash it 2 3 times with Odin. Then your wifi should work
Let me know how it goes
Click to expand...
Click to collapse
Thankyou for reply, okay tonight i will try to tar + md5 the existing modem i have and flash via Odin. Also by any chance do you have pit file for I9192, so that i am plannning to remove my knox boot loader along with old firmware and then may be future glitches will be out to install all other cynogen or CM11 roms.
itsme12345 said:
Thankyou for reply, okay tonight i will try to tar + md5 the existing modem i have and flash via Odin. Also by any chance do you have pit file for I9192, so that i am plannning to remove my knox boot loader along with old firmware and then may be future glitches will be out to install all other cynogen or CM11 roms.
Click to expand...
Click to collapse
Well i have posted one time about a pit file that i took from Efs professional when i saved my Efs but can`t seem to find my post.
I am also not sure if that pit file can be used with Odin
When i get home i will reupload it
itsme12345 said:
.
Click to expand...
Click to collapse
Here is the pit i have, as i said earlier it is made using Efs professional NO IDEEA if it will work with Odin
And i think u can`t remove Knox bootloader this way
As i read u need a Z3x Box and some other things to remove Knox bootloader
@SilviuMik
I installed the ML4 rom and noticed the battery drain is related to how I set up the SIM cards.
If I enable both SIM cards, the mobile network signal shown under Setting>Battery is fine (continuously green)
However if I only enable SIM 1 but disable SIM 2, the cell standby consumption is high and the mobile network signal turns red
If I only insert SIM 1 and remove SIM 2 from the phone, the mobile network signal is green again
I found it the same with MK4 rom. Is this a normal behaviour? I have imagined that disabling one SIM card should lower the battery drain but it is not. Let me know if you have any ideas. Thank you.

[MOD] Jio VoLTE enabler for all roms

~~~ INDIAN JIO SIM USERS ONLY ~~~
For all my Indian mates, who purchased their phone outside India or flashed some custom roms and could not get Jio VoLTE to work and have been requesting this since forever, here you go. No need to use that dreaded Jio4Gvoice app ever again
PLEASE FOLLOW THE BELOW INSTRUCTIONS PROPERLY.
Requirements:
- International S6 edge+ (any rom)
- International Note 5 (any rom)
I don't know if it will work on T-mobile or other variants (report if it does)
- Custom recovery (TWRP) (No root required)
INSTRUCTIONS:
- Make a TWRP backup (in case it fails for your particular rom)
- Uninstall Jio4Gvoice app
- Make and enable Jio APN settings (if you haven't done that already). If you don't know how to do it, separate instructions below.
- Reboot to recovery and flash the attached zip file
- Reboot system and do NOT touch your phone for TWO MINUTES
- Done. You should see VoLTE icon on your status bar and be able to make calls or text from stock dialer and messages app.
Instructions to make Jio APN settings:
- Go to settings > connections > mobile networks > Access Point Names
- Click "ADD" on top right corner
- Type in and do the following stuff
- Name: Jio
- APN: jionet
- Authentication type: choose "None"
- APN protocol: choose "IPv4"
- APN roaming protocol: choose "IPv4"
- leave the rest of the stuff as it is
- click the 3 dot menu button on top right and hit save
- enable the APN you just made, by checking the blue Circle next to Jio
- Done
Tested working on:
Fast and Famous rom (S6 edge+)
Should work on every S6 edge+ and Note 5 roms
Please report below, on which all roms it works.
Download Mirror:
MEGA
Hope you like it. Leave a Thanks if you do. :good:
Also join me on telegram chat at https://t.me/su_community
See you soon!
Reserved
Reserved 2
Well thanks for this will use it once my dual sim edge plus gets update
Sent from my SM-N920G using Tapatalk
Thanks for them guy
Please report this if it works on Tmobile
Sent from my Nexus 5x using Tapatalk
seansc144 said:
Please report this if it works on Tmobile
Click to expand...
Click to collapse
A friend of mine has reported it working on his T-mobile S6 edge+ running Khongloi rom (Marshmallow).
I will try that on my s6 edge plus... is there anything similar for s7 edge???
S7 Edge said:
I will try that on my s6 edge plus... is there anything similar for s7 edge???
Click to expand...
Click to collapse
I am working on the S7 edge ones, though it doesn't seem to change the csc after I flash. I have to look further into it. Will post on S7 or S7 edge threads if I get it working
Fab!! Thank You..
Not working
I am using note5 sm-n9208 infinity f3.i followed your all instructions but not working dev please make comparable our note 5 sm-n9208 thank you very much.
rajrup said:
I am using note5 sm-n9208 infinity f3.i followed your all instructions but not working dev please make comparable our note 5 sm-n9208 thank you very much.
Click to expand...
Click to collapse
It works fine with Note 5. But not Infinity rom. Works on pretty much all other roms.
CrsMthw said:
~~~ INDIAN JIO SIM USERS ONLY ~~~
For all my Indian mates, who purchased their phone outside India or flashed some custom roms and could not get Jio VoLTE to work and have been requesting this since forever, here you go. No need to use that dreaded Jio4Gvoice app ever again
PLEASE FOLLOW THE BELOW INSTRUCTIONS PROPERLY.
Requirements:
- International S6 edge+ (any rom)
- International Note 5 (any rom)
I don't know if it will work on T-mobile or other variants (report if it does)
- Custom recovery (TWRP) (No root required)
INSTRUCTIONS:
- Make a TWRP backup (in case it fails for your particular rom)
- Uninstall Jio4Gvoice app
- Make and enable Jio APN settings (if you haven't done that already). If you don't know how to do it, separate instructions below.
- Reboot to recovery and flash the attached zip file
- Reboot system and do NOT touch your phone for TWO MINUTES
- Done. You should see VoLTE icon on your status bar and be able to make calls or text from stock dialer and messages app.
Instructions to make Jio APN settings:
- Go to settings > connections > mobile networks > Access Point Names
- Click "ADD" on top right corner
- Type in and do the following stuff
- Name: Jio
- APN: jionet
- Authentication type: choose "None"
- APN protocol: choose "IPv4"
- APN roaming protocol: choose "IPv4"
- leave the rest of the stuff as it is
- click the 3 dot menu button on top right and hit save
- enable the APN you just made, by checking the blue Circle next to Jio
- Done
Tested working on:
Fast and Famous rom (S6 edge+)
Should work on every S6 edge+ and Note 5 roms
Please report below, on which all roms it works.
Download Mirror:
MEGA
Hope you like it. Leave a Thanks if you do. :good:
Also join me on telegram chat at https://t.me/su_community
See you soon!
Click to expand...
Click to collapse
Hi,
I wanted to confirm a few steps before I try doing this for the first time.. Im using S6 Edge Plus (Verizon) in India with Jio SIM. For the Instructions,
Do I need to reboot to recovery or reboot into download mode? (or do they mean the same?)
When you say flash it, do u mean using Odin, if yes then which option in Odin it has 4 options AP, CSC, BL, etc?
I will b required to unzip and then flash right?
Sorry to be trouble, but can you please give specific steps... Still new to android world.. thanks!!
S7 Edge said:
Hi,
I wanted to confirm a few steps before I try doing this for the first time.. Im using S6 Edge Plus (Verizon) in India with Jio SIM. For the Instructions,
Do I need to reboot to recovery or reboot into download mode? (or do they mean the same?)
When you say flash it, do u mean using Odin, if yes then which option in Odin it has 4 options AP, CSC, BL, etc?
I will b required to unzip and then flash right?
Sorry to be trouble, but can you please give specific steps... Still new to android world.. thanks!!
Click to expand...
Click to collapse
Since you are new, let me give you a tip. You flash ALL .zip files from TWRP and .tar files from Odin. Also Odin is only used at the beginning to root your device and then later used to flash stock firmware. It will not be used to flash any mods.
Moving on, this mod has only been tested on international variants. Not Verizon or T-mobile. So I strongly recommend you to make a backup with TWRP before you flash this mod in TWRP.
If you have any more questions, please join our telegram group so I can help you better. This is the link to my telegram group https://telegram.me/su_community
Not working on custom rom
Volte Not working for Me in Custom Rom. (Audax Rom). sms is receiving. But can't send..
ahmcl76 said:
Volte Not working for Me in Custom Rom. (Audax Rom). sms is receiving. But can't send..
Click to expand...
Click to collapse
This is for Nougat roms. Didn't know people still use Marshmallow. Will update the OP :good:
CrsMthw said:
It works fine with Note 5. But not Infinity rom. Works on pretty much all other roms.
Click to expand...
Click to collapse
When the infinity rom will get the support ? Or impossible ?
User9948 said:
When the infinity rom will get the support ? Or impossible ?
Click to expand...
Click to collapse
You have to ask the infinity developer to support this mod. I cannot do anything about it.
Samsung galaxy note 5 n920g
I m using minotaurous rom 6.0.1 and VOLTE is not working please help
dnyaneshmoh said:
I m using minotaurous rom 6.0.1 and VOLTE is not working please help
Click to expand...
Click to collapse
Please upgrade to Nougat.

Rom superfast9 stable for note 7/fe android 9 pie by xdavn

SUPPORTED DEVICES
• Galaxy Note 7 N930F
• Galaxy Note 7 N930FD
• Galaxy Note 7 N930S
• Galaxy Note 7 N930L
• Galaxy Note 7 N930K
• Galaxy Note FE N935S/L/K
• Galaxy Note FE N935F
Rom features of PIE:
• All app and features from Galaxy Note Fan Edition
• Build on N935FXXU4CSC5
KERNEL FEATURES
* Full Android 9 Pie (apps,framework,libs etc)
Kernel 3.18.91
full version 100% no mod.
TMB (US) CSC
wallpaper S10,Youtube advanced
Support 2 SIM
Mod weather on lock screen
it smooth
Things that are working:
Everything
except... (see below)
Things that are not working:
Iris scanner just on (note 7 SM-N930F) SM-N935F working perfect
That's it
Bugs:
None known thus far
Update 2 : 04/19
Fix littile issue.
Add wallpaper S10
remover Magisk
Add Dolby Atom
Add Dual Speaker
Add Crack Full theme (free lifetime).
Add S Power Planning
Update 3
Fix 3G/4G lte signal
Battery fast
Fix lock device (Dịch vụ thanh toán đã bị gỡ cài đặt trái phép)
Fix Lag on while play in game
Cảm ứng khi game thấy có độ delay mặc dù FPS và Ping game best
Fix Samsung Health on root
Add Google assistant
Add sound S10
you doesn't put pin number after reset just used printfinger
Notice: Youtube advance please doesn't upgrade
Update 4:
Add Gaming mode
- Fix touch screen
- Fix game lag
- Add Full ringtones S10
- Add reset alway used printfinger
- Add Face Unlock for SmarLock (Dual face unlock vs iris unlock for N7/FE)
- Add Full CSC
- Fix hot while play game
Note: N930 can’t used iris
How to Flash Superfast9 ROM? (For International & USA users)
HOW-TO FLASH Superfast9:
1. Download Superfast9 to your phone.
2. Backup all partitions via TWRP. Specially EFS Partition!
3. Flash via TWRP.
4. Reboot… Done!
5. In case you lost IMEI, simply restore EFS partition Via TWRP.
How to Flash Superfast9 US CSC Detonator? (For All USA CSC)
HOW-TO FLASH HOW-TO FLASH Superfast9 US CSC:
1. Make sure you are running Superfast9 TMB… (You can flash this custom version of Detonator right after flashing Superfast9 ROM)
2. Backup all partitions via TWRP.
3. Flash via TWRP.
4. Reboot… Done! T-Mobile:
1. Make sure you are running Superfast9… (You can flash this custom version of Detonator right after flashing Superfast9 ROM)
2. Backup all partitions via TWRP.
3. Flash via TWRP.
4. Reboot… Done!
DOWNLOAD
Superfast9 V4TMB
Superfast9 TMB CSC (Final) version
Superfast9 ATT CSC
Note: default Rom used TMB csc if you live different country you can try port csc
---------------------------------------------------------------------------------------------------
Guide To Add Superfast9 CSC & OMC
Hello all my friend!!!
As Some Requested - How To Add Single CSC To ROM
Here it is,
Steps:
#1
First Do This,
* Download Template Zip
* Download Your Country Stock Firmware
* Extract the CSC Folder Using Any Kitchen Tools
* Now Look Inside The Template Zip And Check For What Files/Folders I've Added Exactly
* Get The Same Files From Stock Firmware From /System/CSC/
* Get HWRDB and SIPDB Folders - Get These From Stock /System/CSC Folder or /System/
(These 2 Folders Needed For Samsung Keyboard Languages To Work)
Now Add All The New Files To The Template Zip
#2
Now Do This,
* Flash Your Custom ROM ( Don't Reboot Device)
* Flash Your New Single CSC Zip
( Zip Will Remove Old CSC/OMC/ODM Folders If Found Inside /system/ )
Superfast9 CSC & OMC
Note: Remember backup EFS by TWRP before flash csc port. maybe you need that restore because csc can't used good w/t you rom. PLZ
Enjoy
--------------------------------------------------------------------------------------------------------------------------
Support and donations[/B] :
-- Telegram group english HERE.
Credits/Thanks:
-e.h.p.n.tx
- huuhuynh
-XDAVN
Is this still U4 boot loader?
Sent from my Still Rooted NOTE 8
Just installed setting up. So far everything is great. Amazing job great work. No 7 day wait to get OEM unlock and root..AWSOME![emoji106][emoji106]
Sent from my SM-G9650 using Tapatalk
thank you
Boot
butchieboy said:
Is this still U4 boot loader?
Sent from my Still Rooted NOTE 8
Click to expand...
Click to collapse
Yup it working
Root
butchieboy said:
Just installed setting up. So far everything is great. Amazing job great work. No 7 day wait to get OEM unlock and root..AWSOME![emoji106][emoji106]
Sent from my SM-G9650 using Tapatalk
Click to expand...
Click to collapse
This have magisk root but after setup you need download magisk beta 19 and setup this if you want. Thanks
butchieboy said:
Just installed setting up. So far everything is great. Amazing job great work. No 7 day wait to get OEM unlock and root..AWSOME![emoji106][emoji106]
Sent from my SM-G9650 using Tapatalk
Click to expand...
Click to collapse
can you send pics of parts of the rom that are different to stock please?
r3xx3r said:
can you send pics of parts of the rom that are different to stock please?
Click to expand...
Click to collapse
Different them which stock?? Oreo or Pie? If your asking about One Ui there are pics everywhere of what it looks like. It looks like it does on the other Samsung devices.
Sent from my SM-N950U TWIZtd Vengeance Rom
---------- Post added at 09:33 AM ---------- Previous post was at 09:29 AM ----------
Its not a themed rom its rooted One Ui
SM-N935F NoteFE Superfast9 Rom
I guess this is what your asking forView attachment 4745439View attachment 4745440
SM-N935F NoteFE Superfast9 Rom
@e.h.p.n.tx
what kernel, can you give me some info?

			
				
hi man after installation Rom when start setup and choosing language the phone and locked says phone locked because deleted pay services without permission
On pie and oreo
Nice work , work nicely on my Note Fe 935S (even iris scan)
At first it is a litlle bit hot but after restart, it's okie now.
Thanks you
huynhhuu9x said:
Click to expand...
Click to collapse
Your product ?
:laugh: :laugh: :laugh:
mclongthanh said:
@e.h.p.n.tx
what kernel, can you give me some info?
Click to expand...
Click to collapse
this original kernel my friend. thank you for the asking?
e.h.p.n.tx said:
Quote:
# This ROM is made for Note 7 and Note FE models!
...
Full Android 9 Pie (apps,framework,libs etc)
Kernel 3.18.91
full version 100% no mod.
CSC Vietnamese!! you can choose you csc
...
Credits/Thanks:
- huuhuynh
-XDAVN
Click to expand...
Click to collapse
My "...warranty is now void" and I could not be happier. VERY nice work!!! Thanks so much.
I haven't reinstalled root yet, so maybe that is why I'm not finding it...any tip(s) on how to change the CSC?
I cant believe people are not using this rom, its really amazing.
SM-N935F NoteFE Superfast9 Rom
butchieboy said:
I cant believe people are not using this rom, its really amazing.
SM-N935F NoteFE Superfast9 Rom
Click to expand...
Click to collapse
Agree! It is as close to 'perfect' as I've seen for the Note FE.
I just got done integrating the TMO csc into it. I'm still testing, but it looks good so far. I have VoLTE and WiFi Calling again, and it seems the 'T-Mobile LTE connectivity' issue is once again resolved.
If the author is OK with my doing so, I will share it here for those on US T-Mobile.
lazarom said:
Agree! It is as close to 'perfect' as I've seen for the Note FE.
I just got done integrating the TMO csc into it. I'm still testing, but it looks good so far. I have VoLTE and WiFi Calling again, and it seems the 'T-Mobile LTE connectivity' issue is once again resolved.
If the author is OK with my doing so, I will share it here for those on US T-Mobile.
Click to expand...
Click to collapse
I have 1 csc for t-mobile us if u need i can share. I live TX
Im on at&t maybe I will try csc
Sent from my Still Rooted NOTE 8

Categories

Resources