Related
Hi,
after flashing from TeamRocket ICS 1.3b (which worked very well for me) to MIUI 4 Note v8 to get Livewings Edition ( I used cwm for that, but did all wipes properly) I stuck at the Logo mentioned in the threadtitle.
The problem is now: I cant get out of this.
cwm works fine, but I cant start any Rom. Tried to flash several ones, but I still keep stucking...
Has someone an idea ?
Laus007 said:
Hi,
after flashing from TeamRocket ICS 1.3b (which worked very well for me) to MIUI 4 Note v8 to get Livewings Edition ( I used cwm for that, but did all wipes properly) I stuck at the Logo mentioned in the threadtitle.
The problem is now: I cant get out of this.
cwm works fine, but I cant start any Rom. Tried to flash several ones, but I still keep stucking...
Has someone an idea ?
Click to expand...
Click to collapse
Try downloading abyss kernel 3.9 and flash it in recovery and stay in recovery and reboot recovery. Then flash any rom after wiping all the cache and dalvik and data before final rebooting the system (after flashing the rom)
This should work !!
Is it possible to flash a stock rom with odin to get back to out of the box ?
im also stuck in a bootloop when i tried flashing a stockrom over ics rom
please help
poope said:
Is it possible to flash a stock rom with odin to get back to out of the box ?
im also stuck in a bootloop when i tried flashing a stockrom over ics rom
please help
Click to expand...
Click to collapse
Use the above method i mentioned. It should work.
If nothing works then flash any rootable rom via PC Odin and you will be back to stock and then can root again and flash any other rom of your choice! Check out Dr Ketan's guide in the stickies post in development section of note forum !
got also the same predicament, just stuck in Samsung Galaxy N7000 bootup logo screen after I went to the recovery mode to format/system, format/cache..
I tried to follow the instructions actually on how to upgrade my CheckRom RevoHd v5 to Version 6...
The instructions were to format /system and format /cache... then copy the ROM to a new folder in the internal SD card...
Now the question is.. how can I copy the CheckRom RevoHD version 6.zip if I can't even boot back in recovery mode..
when I booted back.. it just stucks on that bootup logo screen.. ..
Bro how much time did you wait ? I was having the same problem! At least thats what i used to think... But turns out that the first boot takes REALLY long... took me approx 25 mins with rocketrom v22
If nothing works then flash any rootable rom via PC Odin and you will be back to stock and then can root again and flash any other rom of your choice!
Click to expand...
Click to collapse
Thanks but i'm still stuck in bootloop after flashing a stockrom with odin.
letters_to_cleo said:
got also the same predicament, just stuck in Samsung Galaxy N7000 bootup logo screen after I went to the recovery mode to format/system, format/cache..
I tried to follow the instructions actually on how to upgrade my CheckRom RevoHd v5 to Version 6...
The instructions were to format /system and format /cache... then copy the ROM to a new folder in the internal SD card...
Now the question is.. how can I copy the CheckRom RevoHD version 6.zip if I can't even boot back in recovery mode..
when I booted back.. it just stucks on that bootup logo screen.. ..
Click to expand...
Click to collapse
to boot in recovery press and hold volume up home button and power button all at same time in any screen and keep pressing till the time the samsung logo again shows up. Then leave the buttons...it should now boot in recovery.
abhisahara said:
to boot in recovery press and hold volume up home button and power button all at same time in any screen and keep pressing till the time the samsung logo again shows up. Then leave the buttons...it should now boot in recovery.
Click to expand...
Click to collapse
I already did that sir but It would really not open up recovery mode. I can however go to Download mode(with the Volume down) but what good is that anyway, right?
anyway, I have already fix my issue by reflashing it back via PC Odin...
I guess its either the instructions of flashing to the new version of CheckRom RevoHd v.6 is pretty much vague (though I really followed it to a tee) or simply the instructions are not that just well emphasized...
can you direct me to the rom you flashed via odin?
I tried flashing stock rom but i'm still in bootloop
Razor-1911 said:
Bro how much time did you wait ? I was having the same problem! At least thats what i used to think... But turns out that the first boot takes REALLY long... took me approx 25 mins with rocketrom v22
Click to expand...
Click to collapse
Was waiting for 2,5 hours , but I will try the Steps with Abyss kernel.
EDIT:
Can confirm that your method worked @ abhisahara.
Thank you very much !
poope said:
can you direct me to the rom you flashed via odin?
I tried flashing stock rom but i'm still in bootloop
Click to expand...
Click to collapse
Download any of the directly rootable rom from Dr Ketan's guide here- http://forum.xda-developers.com/showthread.php?t=1424997
and flash via PC odin !
Thanks, i'm out of bootloop, but i now i have the null keyboard error
edit solved: forgot to flash csc aswell
see my sig
what you need now to download a GB custom kernel then flash it with the current cwm: then do the following to get it right and rooted ics
1-right after flash the GB kernel go to advance and then reboot recovery.
2-boot into the new recovery flash any custom rom like darkynote.
3-bootup get mobile odin and get the chainfire repack ics LP1.
4-start mobile odin flash the chainfire repack and make sure all the boxes are ticked and wipe data also ticked.
5-after the flash is done it will reboot auto in to cwm flash the miui and all is done.
this log steps I'm telling you to follow so you won't encounter the banry count and yellow triangle.
enjoy
Hi all. I also have the same problem. Initially I'm using LiquidSmooth rom. And then I went to Criskelo rom to try the rom...and didn't like it. And I tried to restore to LiquidSmooth and failed. Now I'm stuck in bootloader and when I try to flash anything on CWM, it hangs. Even if I leave it for awhile on the menu, it'll hang too. What should I do?
Stuck on Samsung Startup Screen
I tried various Stock Roms, but unable to go ahead of Samsung bootcreen. I can get into recovery menu & also download screen, so I assume my Note is not bricked. However I tried to flash old directly rootable GB ROM, ICS ROM, Latest GB ROM(Wipe) but nothing works. While flashing latest GB ROM "N7000XXLC1 (Wipe)" ODIN was stuck in data.fs, so flash was incomplete, In other ROMS flash was complete but I was stuck on Startup screen. I tried flashing "Q1_20110914_16GB.pit" file also but no luck. I also flashed Abyss Note Kernel 3.9 & 4.2 in ICS ROM, but I don't know how to flash this kernel in GB ROM as I'm unable to get into external memory card where I transferred kernel zip file. Please help me save my Note.
So first i'll explain whats the problem.
I went from Slim ICS to stock android 2.3.5 XXJVT. After that I flashed the rooted kernel via Odin, including CWM.
So I got to the recovery and wiped everything and flashed the a cm9 nightly, this was in the instructions SlimICS If coming from stock GB. While installing it stopped after a few seconds and rebooted to recovery where a few lines came up amd rebooted again, alot of red letters flashed between the reboots and it kept rebooting.
I have tried other roms with a similar result:
-After install, comes to kernel loading screen reboots straight into recovery.
-Tried infinitum, succesfully installed actually started OS but got an error acreen in android itself, saying something about encryption or something (forgot it).
I know this is a long story but i've been trying to flash ics again for a lot of hours with a lot of fixes but nothing succesfull.
I hope you guys know more then me. If you need more info please ask, im pretty issed of by phone right now.
Thanks
On I9000
Pull out the battery.put back in.go to recovery and flash again.reboot.
It's does this because u need to be on an ics kernel for it to flash the rom properly.it's perfectly normal.don't worry
It only happens when upgrading the os or flashing cm9 the FIRST time
zodiaxe66 said:
Pull out the battery.put back in.go to recovery and flash again.reboot.
It's does this because u need to be on an ics kernel for it to flash the rom properly.it's perfectly normal.don't worry
It only happens when upgrading the os or flashing cm9 the FIRST time
Click to expand...
Click to collapse
Thanks! I'll try and see what it does. I'll let you know
Take a look here:
http://forum.xda-developers.com/showthread.php?t=1627689
ZioGTS said:
Take a look here:
http://forum.xda-developers.com/showthread.php?t=1627689
Click to expand...
Click to collapse
And how would this help non devs and noobs?????????????
If u have no intention of helping why post
Hi, I'm stuck with installing new rom, so I hope, that you'll help me.
There are steps what I've done:
- followed THIS topic and ROOT the device with ODIN and CF-Root 4.4 file.
- OKAY, I'm rooted, so let's flash the new ROM
- entered in Clockworkmod Recovery and format EVERYTHING ( /data, /system, /cache, /sdcard etc.... just everything) for clear system
- next I load package with ROM and than INSTALLL
and here is the most important part
- when installed ROM gets something like bootloop but with restart - ROM is loading and after about 40 sec its RESTART
- and the same thing over and over again - restart ->loading->restart.... System never start up correctly to the end
- then when I saw that it does not work, I tried go into the CWM, but there was no CWM (!!!) - it was erased (by installing new ROM maybe???)
- so I must flash (old and stock) ROM via ODIN and again root device with CF-Root (with CWM) - that was only functional rom, what I was able to run, and again did this procedure
I tried this way, perhaps with millions of different ROM and EVERY was stucked (restart) while loading.
I think there are some non-deleted files in device, which should be erased (and which cannot be erased by CWM) for clear start of new installed ROM, what do you think?
Would someone please help me? I don't want old Gingerbread with Kies
Thanks for every responce!
Does it say in the thread that you have to flash a custom kernel?? Give.me the link for the thread so I can make sure that you've done everything right
Sent from ma 5assak
there is a link, but in hypertext THIS, i repost it in full text:
http://forum.xda-developers.com/showthread.php?t=788108
I think, when I've root and CWM, there is no problem and install a new rom will be very least, so not as it seems
Dude this is a kernel not a rom what's the matter with you??:what:
Sent from ma 5assak
please read all my topic - i flash this kernel only for clockworkmod recovery
through CWM I can flash any other rom
through ODIN only stock - cant find any ICS or JB rom which I can flash via ODIN (.tar file)
What variant of i9000 do you have? Are you sure that the rom you are trying to flash is made exactly for your variant?
EDIT: Try Darky ROM, they have an ODIN flashable version called "Resurrection Edition" or something.
I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak
Samsung Galaxy S I9000, i'm sure 100%. NOT I9001, NOT Samsung Galaxy S2. Tried many roms from Development section for I9000, tried from get.cm etc... always the same result bootloop with restart
donhashem.dh said:
I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak
Click to expand...
Click to collapse
OK. For example: this rom cm-9.0.0-galaxysmtd and cm-9-20120815-NIGHTLY-galaxysmtd from http://get.cm/?device=galaxysmtd
Or this one last ([ALPHA][ROM][4.1.1] CyanogenMod 10 for Samsung Galaxy S) http://forum.xda-developers.com/showthread.php?t=1778526 and 20120808 build.
and [ROM][PORT][ANDROID 4.1.1][BETA] TAJB: Jelly Bean port for Galaxy S V7.1 http://forum.xda-developers.com/showthread.php?t=1747042
and this too [4.0.4][ROM] Dark Knight 5.5 [27/4/2012] http://forum.xda-developers.com/showthread.php?t=1510940
and many more....
realy unhappy from this
Nikishek said:
Samsung Galaxy S I9000, i'm sure 100%t
Click to expand...
Click to collapse
I meant I9000 or I9000B or I9000M or I9000T there's a difference between them
I9000 only, checked it several times
Ok so you can flash Darky Rom Resurrection Edition through ODIN with no problem. Its GingerBread if i remember correctly, but it should give you a recovery mode and fully operating phone. From this point you can flash whatever you want.
....And there is one more important thing:
When I have a stock kernel and stock rom from Samsung, cant get into recovery mode - VOLUME UP and POWER non functional. Only when I type: "adb reboot recovery" in terminal.
Just after when I flash a new pre-rooted kernel with CWM, VOLUPE UP and POWER is now functional
k4Z3666: OK, I try and give you an echo I think, when I format everything in CWM, there will be no sign of the earlier system and ALL WILL BE CLEAR
Nikishek said:
I9000 only, checked it several times
Click to expand...
Click to collapse
ok, flashing ICS, may need to be done twice, as first flash may bootloop, IF you want to return to stock to get out of this mess, since you are not sure as to where you are now, due to flashing many roms, use any kit from My Android Collections, link below to get you to a booting ROM, than add a kernel with CWM (use EZbaze package with kernels)
that's helped me too thank you
Sent from my GT-I9000 using xda app-developers app
Just got my Galaxy S back from my Mum today (After I bricked it and sent for repair) she got a note2 omg... Decided to flash a custom rom..
Here goes..
First I followed this guide completelyhttp://http://wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. After I flash the CM 10, my recovery was upgraded to v6.0.1.5 after reboot. But I cannot get pass the recovery. I will have the cm boot animation, then back to recovery again. Tried reflashing the rom, doesnt say any errors but still gets stuck at recovery.
Then I went thru the method at the wiki.cyanogenmod again and successfully flashed cwm recovery 2.5 again. Tried flashing the CM10 rom again but this time round, It shows a long error message ending with "status 7"
I am still able to go into download mode.
Was on stock unrooted 2.3.3 DXJV9.
I made the super no.1 noob mistake of not making a backup........... But, why is rooting and flashing of this phone so hard.....
Pls, any help is greatly appreciated.
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
It will work
scpion said:
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
Click to expand...
Click to collapse
When u see red error message in stock recovery........u just wipe cache and reboot.......it will work.....
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
try this
scpion said:
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
Click to expand...
Click to collapse
U just use GB jw4(your region) ROM (don't use single file like PDA).........you use files separately like this [PDA,phone,CSC,pit(512 or 513)]...............use Odin 1.85 for flashing files......,when u complete the flashing it automatically reboot to fulfill the flashing...........then also it gives red error means........ clear only wipe cache and don't clear wipe all data...........reboot your system..... I think this will work for u...........:fingers-crossed:
Thanks. Have it solved. Flashed with another rom with seperate files. I was using the the all in one previously. Got it to run CM10 nightly though till now still not too sure how... But, I m real happy now. It works great so far and I couldnt understand why Sammy refuse to roll out official ones even for 4.0..
Still trying to figure out how to root, flash SGS though.. I have done so for many other device but by far,... this phone is the most complicating....
Aj rocker root
By processor only we not getting stock ICS rom but we getting custom ROM by hacking processor.............
For rooting the ROM u want to be in stock GB ROM like 2.3.5 or 2.3.6 and then u want to download this file(http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip)............. after download u want to open Odin 1.85 and select PDA then choose the downloaded file...........select start to flash the file.........reboot and enjoy the root bosssss......if u like this press thanks:fingers-crossed:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Try to see if you can flash another custom Rom, if that works then it could be that your files are corrupted..
Have you stated your problem over at CM forums..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
Most times from GB to JB u have 2 flash custom 2, 3 times. So its normal when flashing custom the first time it takes u to bootanimation and hangs (take out battery and go to recovery with 3 button combo and flash again till it says install is completed) or directly into recovery.
If u wanna flash other jb rom just full wipe and flash new custom. Make sure u make a nandroid backup so u can go back easily
Hi everybody,
just got an old yet effective SGS and I wanted root and get rid of touchwizz and all the crap from my carrier
I was unable to boot into DL mode, i tried everything, so I had to do it with adb reboot
I never had to use Odin to do my hacking with android so i'm not used to it but short story : I rename my rom.zip into rom rom.tar, it failed and all I have is this now :
https://www.dropbox.com/s/wk42jbmp33a3ftu/IMG_20140715_152917.jpg
Also I need to unsimlock, flashing a new rom will also do the trick right ?
thanks
What you just did is bricking your phone. It it was a zip file you need to install it from the recovery. Renaming it is not the way it works. I'm not sure if now you can fix it. Sorry, man
Sent from my GT-I9000 using XDA Premium 4 mobile app
Do you know what I can at least try?
If you can get into download mode:
Follow sections 2 and 3 in this guide.
If you can't:
Follow this guide and after that do what I sails to do if you have download mode.
Does 3-button-combo not work to get into the download mode?
(power & home & volume down)
tetakpatalked from Nexus 7 flo
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
@Idealith simlock has nothing to do with the firmware.
You need now any root kernel for that firmware, it has to be compatible with the intiframs of your 2.x version and it will give you a custom recovery.
There you can flash first CM10.2 to get the modified partition sizes and KK ready recovery and after that you can flash CM11
IMHO, the new Mackay ICS 2014 rom based on CM9 is a lot faster than any KitKat and works better on the i9000
tetakpatalked from N7100
my question about the rom still applies cause this one is awful
but with what does it have to do then ?
EDIT : my browser didn't render the end of your answer
I'm afraid i'm not following though :/
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Idealith said:
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Click to expand...
Click to collapse
Hey, could you tell me which country you are at? I could then take a few steps to help you
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Idealith said:
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Click to expand...
Click to collapse
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
tetakpatak said:
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Idealith said:
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Click to expand...
Click to collapse
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
tetakpatak said:
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
Click to expand...
Click to collapse
and how do i get that bootloader set up ?
Idealith said:
and how do i get that bootloader set up ?
Click to expand...
Click to collapse
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
tetakpatak said:
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
Click to expand...
Click to collapse
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Idealith said:
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Click to expand...
Click to collapse
Ask your carrier, I assume the phone contract isn't new anymore (or expired) so you'll get unlock code for free. Here in Europe one can obtain the unlock code after 2 years for free.
Otherwise you can ask one of the online unlock services, it costs usually around 15-20$ to get the code
tetakpatalked from N7100
Idealith said:
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
Click to expand...
Click to collapse
I'm glad that the JIG helped you (I know I'm late )
danielbe said:
I'm glad that the JIG helped you (I know I'm late )
Click to expand...
Click to collapse
yeah that worked like a charm
it was a good idea to buy it, i would have use the resistors so much
is there a more xda way to unlock it ? my carrier wants me to send the phone and have it unlock, they won't just provide the code :/