I got a fire kindle from my friend, i was pressing buttons on the settings screen and then it stuck on this Team Win Recovery Project (twrp) v2.2.2.1.
I have no clue whats going on here, and ive tried everything i can but its still stuck, ive attached a photo of the screen its stuck on.
Any help will be gladly appreciated!
Did you try to reboot?? Click the reboot button or just press the power down a dew seconds...
Sent from my KFTT using xda premium
i click the reboot button and 4 tabs pop up, System, Power Off, Recovery, and Bootloader
when i power it off then on it goes to the kindle fire screen then says its booting and then just goes back to the teamwin picture thats above.
When i power off the kindle and turn it back on, it goes to the kindle fire screen and says booting....then powers off, and then repeats. and says Press power button for boot menu. When i press the power button, it gives me 3 options. 1.Normal 2.Recovery 3.Reset Boot Mode
Try normal I guess.. though maybe waiting for a dev would be better.. I just know you are somehow accessing the bootstrap madeby Hashcode.. But im not really sure on how do you get out
Sent from my KFTT using xda premium
Niguyen said:
I got a fire kindle from my friend, i was pressing buttons on the settings screen and then it stuck on this Team Win Recovery Project (twrp) v2.2.2.1.
I have no clue whats going on here, and ive tried everything i can but its still stuck, ive attached a photo of the screen its stuck on.
Any help will be gladly appreciated!
Click to expand...
Click to collapse
... 2nd gen or first?
Sent from my KFTT
From the pic. Its an HD
Sent from my KFTT using xda premium
jailuis said:
From the pic. Its an HD
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
HOW? I THATS NOT SAFESTRAP!
Sent from my KFTT
Safetrap was released around the 14th o.o there are pics of it running...
Sent from my KFTT using xda premium
jailuis said:
Safetrap was released around the 14th o.o there are pics of it running...
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
I'm saying that's twrp safe strap is a unoffical "port" of twrp at the top it would say "safestrap 3.05 (twrp 2.2.2.1) that just says twrp
Sent from my KFTT
Niguyen said:
I got a fire kindle from my friend, i was pressing buttons on the settings screen and then it stuck on this Team Win Recovery Project (twrp) v2.2.2.1.
I have no clue whats going on here, and ive tried everything i can but its still stuck, ive attached a photo of the screen its stuck on.
Any help will be gladly appreciated!
Click to expand...
Click to collapse
You have a first gen kindle fire. This forum is for the new model kindle fires,(kindle fire 2 and HD models)
Related
I bricked my tablet after I tried to change my font using font installer by jrummy?
It asked me to restart for changes to occur so I figured if I restarted on my own it would work the same way so I hit cancel. I restarted about 1 minute after I hit cancel.
My tablet will boot up to the AT&T "Rethink possible" screen (after the animation).
It will get stuck there with a pattern of light vibrations between a couple seconds each.
Currently running the stock AT&T ics rom posted in the android dev section for i957.
I've tried to boot into recovery but the Samsung screen doesn't come up until I let go of the buttons therefore leading it to reboot again.
Also tried to go into the emergency download mode ( power, up, down) but it didn't work either.
I appreciate all and any advice, please and thank you!
My device is rooted if that wasn't already implied, I will provide any other details if needed, please help!!
Thanks again!
Are you sure you can't get into recovery mode? Hold power and volume up buttons, etc. Does Odin recognize the device?
Do you have a custom recovery, and if so which one, or is it stock.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
keep trying to get into download mode or recovery. should be possible. the font change will not affect recovery.
I was also performing a backup with titanium backup when I restarted does that make a difference?
I have clockwork mod recovery.
From experience, I can only go into recovery if the Samsung logo pops up for a milli second and I let go.
I actually haven't tried to see if Odin recognizes my device but I assumed if I couldn't go into download mode it wouldn't.
MzzSarahx3 said:
I was also performing a backup with titanium backup when I restarted does that make a difference?
I have clockwork mod recovery.
From experience, I can only go into recovery if the Samsung logo pops up for a milli second and I let go.
I actually haven't tried to see if Odin recognizes my device but I assumed if I couldn't go into download mode it wouldn't.
Click to expand...
Click to collapse
Were you restoring apps from a honeycomb Rom? That will cause a soft brick.
Sent from my SAMSUNG-SGH-I727 using xda premium
If you can get into recovery do a factory reset. That should get you out of a soft brick. You'll have to re-install your apps though.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
I never use tibu anymore
Sent from my SAMSUNG-SGH-I727 using xda premium
Didnt see if you worked your way out of this or not. You may have to hold 3 finger salute (power, up, down) for up to 16 seconds. My guess is that covers the 8 seconds to reboot through any hang up plus up to 8 more to boot to menu.
Still no luck, the computer is not detecting my tablet.
I also wasn't restoring, I was just backing up my data. I'm letting it charge for now, anyone know what else I should do?
I really can't enter recovery OR download.
**** UPDATE****
Okay guys I finally fixed it. Will post details if anyone is still interested.
I'd be interested in the details.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
How did you do?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
I couldn't go into download mode until I did some weird trick with the buttons.
I had to hold the 3 buttons ( power, vol up, vol down) for a couple seconds.. like 6 seconds
THEN hold power and vol up for 2 secs
THEN back to power, vol up, vol down.
I did it by accident cuz I was frustrated but it ended up working so all is good
Thanks for all the help guys!!
I am in the Same Boat!
MzzSarahx3 said:
Still no luck, the computer is not detecting my tablet.
I also wasn't restoring, I was just backing up my data. I'm letting it charge for now, anyone know what else I should do?
I really can't enter recovery OR download.
**** UPDATE****
Okay guys I finally fixed it. Will post details if anyone is still interested.
Click to expand...
Click to collapse
Please Post the fix as I am having the same exact issue as you were! Thanks
The fix has already been posted. :good:
phone stuck at bootloader and power button is dead
what can i do?
fastboot reboot
Sent from my Nexus 4 using xda premium
demkantor said:
fastboot reboot
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
what does it means?
Connect your phone to your computer, start commandline and type in there 'fastboot reboot'.
But there are a lot helping videos out, just google for it.
andi747 said:
Connect your phone to your computer, start commandline and type in there 'fastboot reboot'.
But there are a lot helping videos out, just google for it.
Click to expand...
Click to collapse
it did nothing, just reset the phone, my problem iis that it stuck at the startup showing me the icon of the android over and over again
i filmed exactly whats happen
http://www.youtube.com/watch?v=kteAAaG9X-I&feature=youtu.be
Wipe all then flash a new ROM or a backup
Sent from my Nexus 4 using xda premium
demkantor said:
Wipe all then flash a new ROM or a backup
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
how? my power button doesnt work
Adb reboot recovery
Or hold down volume down key while doing the battery trick to start phone
Also it costs 10-15 to by the new power button flex and takes 5min to fix if your interested
Sent from my Nexus 4 using xda premium
demkantor said:
*snip*
Also it costs 10-15 to by the new power button flex and takes 5min to fix if your interested
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Please teach. Thanks.
Well buy this or something similar
http://pages.ebay.com/link/?nav=item.view&id=281034708399
Then take apart phone and replace it, you tube has video instructions or if your stuck feel free to ask
Sent from my Nexus 4 using xda premium
You can enter into the fastboot pushing the trackball after turn on your n1, then you reboot it through adb into the recovery or flash a recovery.
Hi guys, I recently tried flashing CyanogenMod 10.2 on my atrix hd which it said was successful. (I guess) But after restarting, it wouldnt boot pass the CyanogenMod spinning Logo (boot loop?) . So I pressed vol up+down and power to shut it off. It works but then it immediately boots up to the unlocked bootloader screen and goes back to the cyanmod logo again. So far I pulled the battery which worked but after pressing vol up + power, or vol down + power it goes to unlock bootloader screen then back to the CyanogenMod logo. Is it bricked? I have a back up atrix but I dont wanna use it
what phone are you using
frog1982 said:
what phone are you using
Click to expand...
Click to collapse
Atrix HD MB886
rome7 said:
Atrix HD MB886
Click to expand...
Click to collapse
You pulled your phone apart to pull the battery? Try this: hold all 3 buttons to shut it off, and once it's off let go of all 3, then hold both volume buttons and spam the power button. Once you get to the menu, press volume down then volume up and it should boot into CWM. (You do have CWM, right?)
Sent from my MB886 using xda app-developers app
frog1982 said:
what phone are you using
Click to expand...
Click to collapse
Really? Posting to help your post count? Lol he said it in his question and he's in the atrix section.. Once it turns off hold down both volume buttons then you should get to the boot selection menu. Then go into recovery and do a fresh wipe and install
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Really? Posting to help your post count? Lol he said it in his question and he's in the atrix section.. Once it turns off hold down both volume buttons then you should get to the boot selection menu. Then go into recovery and do a fresh wipe and install
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
thats the problem , when I hold both of the buttons+power it boots up to the cyanogenmod logo, almost like my volume buttons dont work anymore
deeje00 said:
Really? Posting to help your post count? Lol he said it in his question and he's in the atrix section.. Once it turns off hold down both volume buttons then you should get to the boot selection menu. Then go into recovery and do a fresh wipe and install
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I asked what phone he was using because he said that he pulled the battery
rome7 said:
thats the problem , when I hold both of the buttons+power it boots up to the cyanogenmod logo, almost like my volume buttons dont work anymore
Click to expand...
Click to collapse
Don't hold the power. Just the volume buttons.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Don't hold the power. Just the volume buttons.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Still no success, I guess its done for
I figured it out guys my volume buttons are shot. I fix the problem by disassembling the phone and manuelly pressing the buttons
I'm new to the forums and new to all this, Problem is, I rooted and unlocked bootloader on Atrix HD. Set up SafeStrap as recovery. Everything checked and working. After letting SafeStrap install Cyan 10.3 and rebooting, phone entered CyanogenMod boot screen and become stuck. I didn't reset and wipe all stock settings and cache (yes, I know that should have been an obvious step and I'm paying for it now). Figured I could just go into SafeStrap and make the quick fix.
Seems that I'm unable to enter my custom recovery, instead I'm lead to the familiar bricked android stock recovery. No options to access stock rom or fastboot menu. Tried installing a different recovery, but fastboot on PC is unable to find device. Got the factory cable and still no fastboot.
I see in the forums that if you can power the phone up up can fix it but I seem to have the one phone that wont go into fastboot or recovery.
Can anyone help? I seem to have tried it all, am I beating a dead horse??
Literally the exact same thing. Almost word for word..
http://forum.xda-developers.com/showthread.php?p=46706188
Sent from my PACMAN MATRIX HD MAXX
Sorry I took it You got me. I have gone through that but I cant get the phone to fastboot even with the cable, it powers up ,shows the unlocked bootloader screen then the cyanogenmod screen.
Well if you read beforehand as I said in the other thread.. Safestrap is NOT for a unlocked bootloader. And are you using an actual factory cable or the cable that came with the phone (oem) there's a distinct difference.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Well if you read beforehand as I said in the other thread.. Safestrap is NOT for a unlocked bootloader. And are you using an actual factory cable or the cable that came with the phone (oem) there's a distinct difference.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I'm using a factory cable that I ordered. It powers the phone right up but i cant get any button combo to bring up a menu. I can get the dead android
but nothing there will bring up a menu.
Ignited420 said:
I'm using a factory cable that I ordered. It powers the phone right up but i cant get any button combo to bring up a menu. I can get the dead android
but nothing there will bring up a menu.
Click to expand...
Click to collapse
Can you get to the screen that shows you white options on black background? Turn the device off, then hold both volume buttons and press the power button a few times. Once you're at this screen, go down to "AP Fastboot" with volume down, and select it with volume up. Then use Myth or RSD or manually fastboot back to stock.
Maybe the safestrap thread op should put a big sign or warning telling users about not using safestrap no more.. I see noobs are the one flashing still safestrap when that is useless now. People like that search on google will find that thread and will start from there as they dont know and that was actually an old method to go around on atrix hd.
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
penser said:
Can you get to the screen that shows you white options on black background? Turn the device off, then hold both volume buttons and press the power button a few times. Once you're at this screen, go down to "AP Fastboot" with volume down, and select it with volume up. Then use Myth or RSD or manually fastboot back to stock.
Click to expand...
Click to collapse
No, when I tried that the dead android came up, and i cant get any menu to show. It powers up and the shows the unlocked bootloader screen then to the CyanogenMod where it gets stuck and wont cut off until the battery is dead or i hard restart it.
SVLAN said:
Maybe the safestrap thread op should put a big sign or warning telling users about not using safestrap no more.. I see noobs are the one flashing still safestrap when that is useless now. People like that search on google will find that thread and will start from there as they dont know and that was actually an old method to go around on atrix hd.
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
Click to expand...
Click to collapse
Well some people can't unlock for various reasons that's why it says for locked bootloader in the title now. But they have to realize the rom selection is minimal.
To the op are you sure your holding both volume buttons down on restart? Not letting go of one? Because if you can power it on and off I see no reason you can't get to the boot menu.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Well some people can't unlock for various reasons that's why it says for locked bootloader in the title now. But they have to realize the rom selection is minimal.
To the op are you sure your holding both volume buttons down on restart? Not letting go of one? Because if you can power it on and off I see no reason you can't get to the boot menu.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Yes, when i hold both buttons it goes to the dead android and then reboots.
SVLAN said:
Maybe the safestrap thread op should put a big sign or warning telling users about not using safestrap no more.. I see noobs are the one flashing still safestrap when that is useless now. People like that search on google will find that thread and will start from there as they dont know and that was actually an old method to go around on atrix hd.
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
Click to expand...
Click to collapse
Don't want to go into the details, but if I wanted to I could run two 4.3 roms with SSR. All you really need is two roms that run the same kernel.
Yes I understand that part skeevy as I did asked myself few times about if that was possible and i find out that it was by the same parameters you mentioned. But what I mean is at the stage we are I will see safestrap as not supported anymore is useless for us since we can unlock the bootloader.
Just saying :beer:
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
SO, I still cant seem to pull up any menu, even with the factory cable. I see that many others made the same mistake that I did and they found a fix. My problem is the phone doesnt go into fastboot
how about press & hold the volume down button and then the power button?
pijes said:
how about press & hold the volume down button and then the power button?
Click to expand...
Click to collapse
I have the factory cable and when I plug it in and hold down the volume down it powers up and the shows the unlocked bootloader screen then to the CyanogenMod where it gets stuck. At first I thought the button didn't work, but if I hold all three it goes to the dead android, so to me the button does work. The phone just doesnt seem to want to fastboot.
You only hold the volume buttons and just press power.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
You only hold the volume buttons and just press power.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I don't even have to do that. I just boot/reboot and hold both volumes down. That's all.
That will access the boot menu giving options to access fastboot mode, recovery, and more.
skeevydude said:
I don't even have to do that. I just boot/reboot and hold both volumes down. That's all.
That will access the boot menu giving options to access fastboot mode, recovery, and more.
Click to expand...
Click to collapse
That's what I do too because it automatically reboots. Iono if his does or not though.
Sent from my PACMAN MATRIX HD MAXX
skeevydude said:
I don't even have to do that. I just boot/reboot and hold both volumes down. That's all.
That will access the boot menu giving options to access fastboot mode, recovery, and more.
Click to expand...
Click to collapse
when I do that it goes to the dead android screen
So i was trying to update to an older version because when i updated to android 5.1.1, it could not update google play services by it self. I had to get the new gapps for android 5.1.1. When i plugged the kindle in my computer, it would reboot the kindle so i couldnt put files on the kindle. So i decided to go to twrp and downgrade but i forgot to wipe so now im stuck in Cyanogenmod loading boot screen and would pop up with a message saying, "unfortunately, the process android.process.media had stopped" and there are options report or ok. This message would popup for a 1 to 5 seconds and it would go back to cyanogenmod loading screen. Please help, my computer doesnt detect the kindle when i plug it in.
Can you get back into twrp and try reinstalling cm12 to at least get you back to a good starting point to try to downgrade again?
Sent from my SCH-I545 using XDA Free mobile app
RedsonRising said:
Can you get back into twrp and try reinstalling cm12 to at least get you back to a good starting point to try to downgrade again?
Sent from my SCH-I545 using XDA Free mobile app
Click to expand...
Click to collapse
no, i cant even go back into twrp, im stuck in a boot loop
Try switching kindle off and rebooting into recovery,press the power button ,wait for the screen with the fire coloured blue to appear then hold the volume up button until you see the red pattern appear release the volume button ,then the kindle should go into twrp
bjbirch said:
Try switching kindle off and rebooting into recovery,press the power button ,wait for the screen with the fire coloured blue to appear then hold the volume up button until you see the red pattern appear release the volume button ,then the kindle should go into twrp
Click to expand...
Click to collapse
thanks so much, it worked