Database Develop

Clockworkmod Recovery Combo

Is there any combo to get in recovery after power on phone?
I remember that in Zero 2.3.4 (but im not sure), is G button + power button, but it isnt work in CM 10
Thank you.

bollix said:
Is there any combo to get in recovery after power on phone?
I remember that in Zero 2.3.4 (but im not sure), is G button + power button, but it isnt work in CM 10
Thank you.
Click to expand...
Click to collapse
Power your phone off, push and hold volume down, then hold power button as well and hold it for a few seconds. Then you ll reboot to recovery or simply boot the phone, hold the power button, choose reboot, in the next menu choose boot recovery and done.
Sent from my LG-P970 using xda app-developers app

Doesnt work for me, i need combo to get recovery without booting my system, because my CM10.1 is broken and wont boot..

try to connect to an usb cable

felipelluna said:
try to connect to an usb cable
Click to expand...
Click to collapse
doesnt work.

simple use SFT.

there is PBR (iirc, pseudo-boot recovery, button combo to enter recovery, cmiiw) on cm10. I think cm10.1 also has it.
turn on the phone, focus on led button, when it start blink for the first time press volume down + power button. You should press it at the right time to make it work. Tried it couples of time.

thank you, it works!

bollix said:
thank you, it works!
Click to expand...
Click to collapse
iI just saw that it work onjy on GB roms and cm10 cm10.1
I guess it is about bootloader, I don't know exactly!
I tried it on STOCK ICS 4.0.4 (Nemesis) and it dind't work for me.

Boot Failure, Battery low help.

Rooted my atrix hd, flashed safestrap, wiped, flashed cm10 and got a bootloop.
Now My battery is low, Cant get anything besides a Motorola logo and "device is locked, status code 0"
"battery low", "boot failure".
Anyway, I have tried booting into recovery with holding down power and volume up/down, no luck.
Anything I can do?
I have rsd ready with a stock sbf ready to flash. I need a working phone!
thank you very much.

And yes I have searched for answers on the net and this forum, among others. the phone won't charge. ugh

Had the same thing happen to me luckily I have insurance. Basically you need someone else with an atrix HD or to get a factory cable.
Sent from my PACMAN MATRIX HD MAXX

dizz232 said:
Rooted my atrix hd, flashed safestrap, wiped, flashed cm10 and got a bootloop.
Now My battery is low, Cant get anything besides a Motorola logo and "device is locked, status code 0"
"battery low", "boot failure".
Anyway, I have tried booting into recovery with holding down power and volume up/down, no luck.
Anything I can do?
I have rsd ready with a stock sbf ready to flash. I need a working phone!
thank you very much.
Click to expand...
Click to collapse
Well, my friend had same prob as u (stuck & battery low with installed safestrap in phone) and here is what i did to help her:
1. Open bootmenu (power+volume up+volume down)
2. Select BP Tools (the last choice) and it will boot the safestrap directly. I saw that in safes trap, phone could be charged normally and I let it be there until baterry was about 25% and flashed.
Sent from my MB886 using xda app-developers app

devilsking said:
Well, my friend had same prob as u (stuck & battery low with installed safestrap in phone) and here is what i did to help her:
1. Open bootmenu (power+volume up+volume down)
2. Select BP Tools (the last choice) and it will boot the safestrap directly. I saw that in safes trap, phone could be charged normally and I let it be there until baterry was about 25% and flashed.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Open from the boot menu at what point? from powered off? Cause my phone wont turn on unless I plug it into the wall and the it goes right to
the fastboot screen.

any help would be great! I want to try everything before I send it off to motorola.

Like I said factory cable or a battery from another atrix HD fully charged.
Sent from my PACMAN MATRIX HD MAXX

Thanks, I ordered a factory cable adapter. Should fix my issues now and any in the future.

dizz232 said:
Open from the boot menu at what point? from powered off? Cause my phone wont turn on unless I plug it into the wall and the it goes right to
the fastboot screen.
Click to expand...
Click to collapse
Hold both volume down and up. I did several times and it worked, of course sometimes it went to fastboot directly, hold power button to turn off and try again.
Sent from my MB886 using xda app-developers app

[Q] Atrix HD softbrick

I'm new to the forums and new to all this, Problem is, I rooted and unlocked bootloader on Atrix HD. Set up SafeStrap as recovery. Everything checked and working. After letting SafeStrap install Cyan 10.3 and rebooting, phone entered CyanogenMod boot screen and become stuck. I didn't reset and wipe all stock settings and cache (yes, I know that should have been an obvious step and I'm paying for it now). Figured I could just go into SafeStrap and make the quick fix.
Seems that I'm unable to enter my custom recovery, instead I'm lead to the familiar bricked android stock recovery. No options to access stock rom or fastboot menu. Tried installing a different recovery, but fastboot on PC is unable to find device. Got the factory cable and still no fastboot.
I see in the forums that if you can power the phone up up can fix it but I seem to have the one phone that wont go into fastboot or recovery.
Can anyone help? I seem to have tried it all, am I beating a dead horse??

Literally the exact same thing. Almost word for word..
http://forum.xda-developers.com/showthread.php?p=46706188
Sent from my PACMAN MATRIX HD MAXX

Sorry I took it You got me. I have gone through that but I cant get the phone to fastboot even with the cable, it powers up ,shows the unlocked bootloader screen then the cyanogenmod screen.

Well if you read beforehand as I said in the other thread.. Safestrap is NOT for a unlocked bootloader. And are you using an actual factory cable or the cable that came with the phone (oem) there's a distinct difference.
Sent from my PACMAN MATRIX HD MAXX

deeje00 said:
Well if you read beforehand as I said in the other thread.. Safestrap is NOT for a unlocked bootloader. And are you using an actual factory cable or the cable that came with the phone (oem) there's a distinct difference.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I'm using a factory cable that I ordered. It powers the phone right up but i cant get any button combo to bring up a menu. I can get the dead android
but nothing there will bring up a menu.

Ignited420 said:
I'm using a factory cable that I ordered. It powers the phone right up but i cant get any button combo to bring up a menu. I can get the dead android
but nothing there will bring up a menu.
Click to expand...
Click to collapse
Can you get to the screen that shows you white options on black background? Turn the device off, then hold both volume buttons and press the power button a few times. Once you're at this screen, go down to "AP Fastboot" with volume down, and select it with volume up. Then use Myth or RSD or manually fastboot back to stock.

Maybe the safestrap thread op should put a big sign or warning telling users about not using safestrap no more.. I see noobs are the one flashing still safestrap when that is useless now. People like that search on google will find that thread and will start from there as they dont know and that was actually an old method to go around on atrix hd.
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium

penser said:
Can you get to the screen that shows you white options on black background? Turn the device off, then hold both volume buttons and press the power button a few times. Once you're at this screen, go down to "AP Fastboot" with volume down, and select it with volume up. Then use Myth or RSD or manually fastboot back to stock.
Click to expand...
Click to collapse
No, when I tried that the dead android came up, and i cant get any menu to show. It powers up and the shows the unlocked bootloader screen then to the CyanogenMod where it gets stuck and wont cut off until the battery is dead or i hard restart it.

SVLAN said:
Maybe the safestrap thread op should put a big sign or warning telling users about not using safestrap no more.. I see noobs are the one flashing still safestrap when that is useless now. People like that search on google will find that thread and will start from there as they dont know and that was actually an old method to go around on atrix hd.
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
Click to expand...
Click to collapse
Well some people can't unlock for various reasons that's why it says for locked bootloader in the title now. But they have to realize the rom selection is minimal.
To the op are you sure your holding both volume buttons down on restart? Not letting go of one? Because if you can power it on and off I see no reason you can't get to the boot menu.
Sent from my PACMAN MATRIX HD MAXX

deeje00 said:
Well some people can't unlock for various reasons that's why it says for locked bootloader in the title now. But they have to realize the rom selection is minimal.
To the op are you sure your holding both volume buttons down on restart? Not letting go of one? Because if you can power it on and off I see no reason you can't get to the boot menu.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Yes, when i hold both buttons it goes to the dead android and then reboots.

SVLAN said:
Maybe the safestrap thread op should put a big sign or warning telling users about not using safestrap no more.. I see noobs are the one flashing still safestrap when that is useless now. People like that search on google will find that thread and will start from there as they dont know and that was actually an old method to go around on atrix hd.
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
Click to expand...
Click to collapse
Don't want to go into the details, but if I wanted to I could run two 4.3 roms with SSR. All you really need is two roms that run the same kernel.

Yes I understand that part skeevy as I did asked myself few times about if that was possible and i find out that it was by the same parameters you mentioned. But what I mean is at the stage we are I will see safestrap as not supported anymore is useless for us since we can unlock the bootloader.
Just saying :beer:
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium

SO, I still cant seem to pull up any menu, even with the factory cable. I see that many others made the same mistake that I did and they found a fix. My problem is the phone doesnt go into fastboot

how about press & hold the volume down button and then the power button?

pijes said:
how about press & hold the volume down button and then the power button?
Click to expand...
Click to collapse
I have the factory cable and when I plug it in and hold down the volume down it powers up and the shows the unlocked bootloader screen then to the CyanogenMod where it gets stuck. At first I thought the button didn't work, but if I hold all three it goes to the dead android, so to me the button does work. The phone just doesnt seem to want to fastboot.

You only hold the volume buttons and just press power.
Sent from my PACMAN MATRIX HD MAXX

deeje00 said:
You only hold the volume buttons and just press power.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I don't even have to do that. I just boot/reboot and hold both volumes down. That's all.
That will access the boot menu giving options to access fastboot mode, recovery, and more.

skeevydude said:
I don't even have to do that. I just boot/reboot and hold both volumes down. That's all.
That will access the boot menu giving options to access fastboot mode, recovery, and more.
Click to expand...
Click to collapse
That's what I do too because it automatically reboots. Iono if his does or not though.
Sent from my PACMAN MATRIX HD MAXX

skeevydude said:
I don't even have to do that. I just boot/reboot and hold both volumes down. That's all.
That will access the boot menu giving options to access fastboot mode, recovery, and more.
Click to expand...
Click to collapse
when I do that it goes to the dead android screen

Urgent help please!! I cant see anything on atrix hd !! No boot up nothing!!

HEllo everyone!!! and @skeevydude
I was trying to install roms with using RSD Lite tool, but i got a message that it is FAILED
So I tried to restart to phone by holding power and volume buttons BUTT NOTHING SHOWS UP ON MY SCREEN!!!
When the phone is connected to the pc and when i do the reset ( pwr+volume buttons) pc sounds the notification sound, i am understanding it somehow turns on but i dont have any display...
I have no idea what to do at this point... does anyone have any suggestionss??
please :crying::crying::crying::crying:

You can't flash custom roms with rsd man. You need an unlocked bootloader and to use a custom recovery to flash. You'll have to flash the stock firmware with rsd and start over.
Sent from my PACMAN MATRIX HD MAXX

deeje00 said:
You can't flash custom roms with rsd man. You need an unlocked bootloader and to use a custom recovery to flash. You'll have to flash the stock firmware with rsd and start over.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
The problem is i cant see anything on the phone at all!!! I cant see the boot menu (the black screen menu) the bootloader was unlocked at the last time but i cant say anything about it right now...
I all know is the phone power on somehow.. by looking at the device manager i see QHSUSB_DLOAD port is connected and i can see the same thing in RSD Lite too..
So when i try using RSD it says "the phone failed to switch to fastboot mode"
Does anyone have any suggestions?

Once the bootloader is unlocked, it can't be re-locked which is good.
Were you trying to install a custom or stock rom using RSD? What rom were you running?

audit13 said:
Once the bootloader is unlocked, it can't be re-locked which is good.
Were you trying to install a custom or stock rom using RSD? What rom were you running?
Click to expand...
Click to collapse
Holly shh...!!!
I just found out that the ROM i was trying to install, I mistakenly tried to flash a custom ROM for Motorola Razr HD !!! not Atrix AD((( what the f.ck i did !!!!
I downloaded the wrong rom (
The only life sign I am getting is the USB sound and the QHSUSB_DLOAD port in the device manager.
does it help somehow?

Did you try the Myth Tools: http://forum.xda-developers.com/showthread.php?t=2262726
Not sure if it will help but it may be worth a try.

audit13 said:
Did you try the Myth Tools: http://forum.xda-developers.com/showthread.php?t=2262726
Not sure if it will help but it may be worth a try.
Click to expand...
Click to collapse
I did try
no luck.. :crying::crying:

legendnexus said:
Holly shh...!!!
I just found out that the ROM i was trying to install, I mistakenly tried to flash a custom ROM for Motorola Razr HD !!! not Atrix AD((( what the f.ck i did !!!!
I downloaded the wrong rom (
The only life sign I am getting is the USB sound and the QHSUSB_DLOAD port in the device manager.
does it help somehow?
Click to expand...
Click to collapse
You can flash RAZR hd roms to this phone. Just not through rsd as I said before.
Sent from my PACMAN MATRIX HD MAXX

@skeevydude Do the factory cables/ usb jig get our phones into download mode?

I have same problem
How could you resolve it? I have same problem but i was flashing official firmware but flashing filed and phone is in same condition nothing shows on display only when i connect it to computer searching for qhsusb_dload driver

lotkinsk1_legend said:
How could you resolve it? I have same problem but i was flashing official firmware but flashing filed and phone is in same condition nothing shows on display only when i connect it to computer searching for qhsusb_dload driver
Click to expand...
Click to collapse
try instead of using vol + - , power, just use vol - , power, then connect to the pc, and try something easy in the console like "fastboot reboot-fastboot" if it works then just flash normally with myth else i don't know

massterlee said:
try instead of using vol + - , power, just use vol - , power, then connect to the pc, and try something easy in the console like "fastboot reboot-fastboot" if it works then just flash normally with myth else i don't know
Click to expand...
Click to collapse
No reaction with volume - , power button only blink green point when connect to PC or use power, vol+ - buttons , RSD lite shows device connected but "switch to fastboot mode manually"
if someone could please help

I went through the same thing this weekend and probably bricked my phone 6 times and killed one SD card. What eventually worked for me was holding the power button down until the phone vibrates, then quickly holding the power button and both volume keys until the fast boot option came up. It took 45 tries before I got it. From there I was able to boot into my ClockworkMod recovery and flash my new ROM. ProBam Kit Kat. I hope this helps
Sent from my Atrix HD Maxx ProBAM using xda app-developers app
---------- Post added at 08:42 AM ---------- Previous post was at 08:37 AM ----------
Sorry, it took 4-5 tries
Sent from my Atrix HD MAXX ProBAM using xda app-developers app

TheJeremyWhite said:
I went through the same thing this weekend and probably bricked my phone 6 times and killed one SD card. What eventually worked for me was holding the power button down until the phone vibrates, then quickly holding the power button and both volume keys until the fast boot option came up. It took 45 tries before I got it. From there I was able to boot into my ClockworkMod recovery and flash my new ROM. ProBam Kit Kat. I hope this helps
Sent from my Atrix HD Maxx ProBAM using xda app-developers app
---------- Post added at 08:42 AM ---------- Previous post was at 08:37 AM ----------
Sorry, it took 4-5 tries
Sent from my Atrix HD MAXX ProBAM using xda app-developers app
Click to expand...
Click to collapse
I hold the power button down about 2 minutes but no reaction no vibrate need more time?

If it doesn't vibrate afer ~10 seconds release the button and try again. It can take several tries. As stated above, as soon as it vibrates let go and immediately press both volume buttons and the power button; this will get you into fastboot where you can choose to boot into recovery.

joarce said:
If it doesn't vibrate afer ~10 seconds release the button and try again. It can take several tries. As stated above, as soon as it vibrates let go and immediately press both volume buttons and the power button; this will get you into fastboot where you can choose to boot into recovery.
Click to expand...
Click to collapse
no reaction no vibrate only blink when connect to PC and rsd light shows that phone is connected but not flashing failed please switch to fastboot mode now i order factory fastboot cable what do you think may it help in this situation?

What your battery level at the last time you saw it? My difficulties were partly caused by low batt (I believe it doesn't charge in fastboot or recovery) I've had to pull batteries and manually wire them to a charger before.
Sent from my Atrix HD MAXX ProBAM using xda app-developers app

TheJeremyWhite said:
What your battery level at the last time you saw it? My difficulties were partly caused by low batt (I believe it doesn't charge in fastboot or recovery) I've had to pull batteries and manually wire them to a charger before.
Sent from my Atrix HD MAXX ProBAM using xda app-developers app
Click to expand...
Click to collapse
It was about 53% and it was in fastboot mod so it wasn't charging I try to flash it to start phone in normal mode to charge but when it was flashing in 1/23 files it failed and because battery low and then it is like now no reaction only when connect to PC blink green on phone and connected :X

A factory fastboot cable would probably help you in this situation. You can look on youtube on how to make one or you can buy one for about 5 bucks on eBay. It will both power your phone and force fastboot mode when plugged into the computer
Sent from my Atrix HD MAXX ProBAM using xda app-developers app

TheJeremyWhite said:
A factory fastboot cable would probably help you in this situation. You can look on youtube on how to make one or you can buy one for about 5 bucks on eBay. It will both charge your battery when plugged into the computer and force fastboot mode
Sent from my Atrix HD MAXX ProBAM using xda app-developers app
Click to expand...
Click to collapse
Thanks I have ordered it from eBay I hope it will help to me .
thanks

[Q] How to enter HTC One Recovery?

I've just updated my HTC One to KitKat 4.4.2 (un-rooted and unlocked)and experiencing some lag. I want to clear system cache entering recovery mode but it ain't let me enter. Method I'm using is pressing power and volume down keys and selecting recovery mode but it get stuck on screen with cell phone on it.

RizwanYaqoob said:
I've just updated my HTC One to KitKat 4.4.2 (un-rooted and unlocked)and experiencing some lag. I want to clear system cache entering recovery mode but it ain't let me enter. Method I'm using is pressing power and volume down keys and selecting recovery mode but it get stuck on screen with cell phone on it.
Click to expand...
Click to collapse
If you hold the power button for 2 seconds the menu should pop up. Or try flashing a custom recovery.
Sent from my HTC One using Tapatalk

squabbi said:
If you hold the power button for 2 seconds the menu should pop up. Or try flashing a custom recovery.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I'm doing through flash method but it get stuck on screen with cell phone on it and nothing else.

RizwanYaqoob said:
I'm doing through flash method but it get stuck on screen with cell phone on it and nothing else.
Click to expand...
Click to collapse
Is this when you enter recovery?
Sent from my HTC One using Tapatalk

RizwanYaqoob said:
I'm doing through flash method but it get stuck on screen with cell phone on it and nothing else.
Click to expand...
Click to collapse
power + vol up should show the menu in stock recovery

squabbi said:
Is this when you enter recovery?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Yes. I've tried more than 6 times following this method; http://forum.xda-developers.com/showthread.php?t=2448036

clsA said:
power + vol up should show the menu in stock recovery
Click to expand...
Click to collapse
while phone is powered off or turned on?

RizwanYaqoob said:
while phone is powered off or turned on?
Click to expand...
Click to collapse
boot to bootloader (power + Vol down)
vol down to recovery then hit power
on the next screen hit power + vol up
the menu will appear

clsA said:
boot to bootloader (power + Vol down)
vol down to recovery then hit power
on the next screen hit power + vol up
the menu will appear
Click to expand...
Click to collapse
Worked for me. Thanks a lot but can you please suggest me something? I'm experiencing some lag on my HTC One after update (from 4.2.2 to 4.3). I've cleared cache from recovery, is it okay or do I need to apply factory reset as well?

RizwanYaqoob said:
Worked for me. Thanks a lot but can you please suggest me something? I'm experiencing some lag on my HTC One after update (from 4.2.2 to 4.3). I've cleared cache from recovery, is it okay or do I need to apply factory reset as well?
Click to expand...
Click to collapse
4.4 is faster than 4.3 unlock your bootloader and install a custom recovery and a Rom