Before I used CM10 i just used the stock (flashed latest GB) that came with my phone. So I flashed CWM5 and cleared all the three stuff I was supposed to. I installed the CM10 zip and since then its been stuck on the boot animation, not even a loop. Just the animation.
Any ideas whats wrong?
Thanks in advance
JellyBean 4.1.1 said:
Before I used CM10 i just used the stock (flashed latest GB) that came with my phone. So I flashed CWM5 and cleared all the three stuff I was supposed to. I installed the CM10 zip and since then its been stuck on the boot animation, not even a loop. Just the animation.
Any ideas whats wrong?
Thanks in advance
Click to expand...
Click to collapse
Well happened with me once when I had put AOKP ROM in my Galaxy Note.
Here is what I did:
Go to Recovery.
Wipe Cache.
Try reboot
No results?
Recovery again.
WIpe Dalvik Cache Also
Try reboot.
Still no results?
Try to wipe data/fac reset and re flash some other ROM as of now (which you are confident about that it will work)
Now go ahead and let the old ROM boot. (Surely it will, as you would have used prior)
Now, go connect USB and check MD5 of the file you had kept on SD Card (I mean the CM10 file)
I found that my MD5 didnt match.
If you think it didnt match download again.
If you know it matches then go for reflash.
But this time before flashing the new ROM just use some cleaning script such as Ultimate KErnel Cleaning Script. In Galaxy Note I used Jbroid Kernel Script. I aint sure now if you can use Jbroid in Ace.
Goof luck!
Press Thanks
I got it working, what I had to do was flash CM7, then CM9 then CM10 :/ after that it was fine Thanks for the help
Welcome
The problem was with the kernel being different in CM10 and official version.
realzahed said:
The problem was with the kernel being different in CM10 and official version.
Click to expand...
Click to collapse
Please ask CM9 and CM10 questions here:
http://forum.xda-developers.com/showthread.php?t=1742844
hi Everyone! I use KU5900 ICS ROM. I wanna install Cm10 and I installed but not openıng.
it's restarting itself on cm10 animation. Does anybody know What am I suppose to do?
Did you wipe Cache+Wipe+Dalvik?
Also don't forget to flash gapps too
Hello, can some one help me with this issue please, this has never happened to me before, I really don't know what is wrong or how to fix it. I want to try out TheWhisp's CM10 rom on my S6500D, I follow instructions that few ppl posted in the original thread of the rom.
Download rom
Go to squadzone CWM
Wipe data
Install zip
Reboot
I follow that tutorial, I download latest 13.2 update/build or w/e, I have squadzone's 5.0.2.8 CWM, I'm on a stock rom and I'm rooted aswell, so I reboot in CWM, wipe data/factory reset, then Instal zip from sd card, when it tries to instal I get that status 7 error, it say's something about build.prop, I looked around and saw that you can delete something at the beggining when you open updater file and I did that but then It starts to instal but finishes really quickly, less then a minute. Shouldn't it take longer? When it instals I reboot my phone it gets stuck at the screen after Samsung one, on the one where it says Samsung GT-S6500D and then goes into bootloop, can someone help me with this please. Maybe i deleted wrong strings or w/e it's called in updater? I also tried wipe cache + dalvik cache + battery stats
are you sure you used the rom for mini 2 i think the one you flashed was for mini
dheeraj (dhlalit11) said:
are you sure you used the rom for mini 2 i think the one you flashed was for mini
Click to expand...
Click to collapse
Yea I'm sure I was flashing the right one. Anyways I fixed it today, the problem was in my kernel, I flashed squadzone's kernel and it worked perfectly, now I have cm10 on my lil' SGM2 . Well hope this helps if anyone else is having problem like this and sorry for bothering.
I am currently running V20a EURxx the one that everyone was downloading a while back, via the lg suite hack..
I have installed the all-in-one root tool and "think" i have rooted it but i found it to be very confusing
Cyanogenmod 10.1 (the one that came out yesterday) is what i want. http://forum.xda-developers.com/showthread.php?t=2238040
so.....
What are the steps i have to take? I have rooted and done custom roms in the past but am still kind of a n00b.. Please help a fellow XDA member
ragdoll20 said:
I am currently running V20a EURxx the one that everyone was downloading a while back, via the lg suite hack..
I have installed the all-in-one root tool and "think" i have rooted it but i found it to be very confusing
Cyanogenmod 10.1 (the one that came out yesterday) is what i want. http://forum.xda-developers.com/showthread.php?t=2238040
so.....
What are the steps i have to take? I have rooted and done custom roms in the past but am still kind of a n00b.. Please help a fellow XDA member
Click to expand...
Click to collapse
You have the steps right there in the first post. I'll leave some explanations
You need cwm (clockwordmod recovery) first. The easiest way to install it is via rommanager https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en. Use rommanager to flash cwm.
Once cwm is installed. Then proceed.
1. Place cm-10.1-20130416-NIGHTLY-p880.zip and gapps-jb-20130301-signed.zip in to your internal sdcard
- Download cm http://get.cm/get/jenkins/25315/cm-10.1-20130417-NIGHTLY-p880.zip
- Download gapps http://goo.im/gapps/gapps-jb-20130301-signed.zip
- Move the files to your internal sdcard
You need to be in cwm recovery for the next steps. To do this you need to power off your phone, Hold VolUp and Power Button at the same time to power on your phone. Wait till you get to cwm recovery console.
2. BACKUP ALL YOUR DATA with CWM Recovery
- In cwm console select backup. use vol+/vol- to navigate through the menus and use power button to select the option.
3. In CWM Recovery make wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system
- These options can also be found in cwm
4. Flashcm-10.1-20130416-NIGHTLY-p880.zip from sdcard
- Still in cwm. Select Install zip from sdcard -> choose zip from sdcard -> navigate to where you put cm-10.1-20130416-NIGHTLY-p880.zip
5. Gapps-jb-20130301-signed.zip from sdcard
- Still in cwm. Select Install zip from sdcard -> choose zip from sdcard -> gapps-jb-20130301-signed.zip
6. Done
- Reboot
I'm not an expert, but that is how I did it.
ragdoll20 said:
I am currently running V20a EURxx the one that everyone was downloading a while back, via the lg suite hack..
I have installed the all-in-one root tool and "think" i have rooted it but i found it to be very confusing
Cyanogenmod 10.1 (the one that came out yesterday) is what i want. http://forum.xda-developers.com/showthread.php?t=2238040
so.....
What are the steps i have to take? I have rooted and done custom roms in the past but am still kind of a n00b.. Please help a fellow XDA member
Click to expand...
Click to collapse
Actually, the first thing you must do is unlock the bootloader. For now, the only sure versions are EUR-XXX (and to be clear, it's not enough that you installed the Euro-Open FW, your phone must have the software identified as EUR-XXX - for instance, german sim-free phones will be identified as 262-000, even if they install Euro-Open FW, and they don't seem to be unlockable as of yet).
So, check the software version (at system settings -> phone info -> software information -> software version) and, if it's Eur-XXX or something similar, you can unlock the bootloader.
If you're using the all-in-one tool, you just have to follow the instructions on it's thread to unlock the bootloader.
Only then can you install CM with the method akosierwin provided.
Okay i followed the steps and installed clockwork mod via the rom manager...BUT!
If i boot into recovery it says: LG Security,ERROR boot image signature, 5 seconds shut down something something...
Whats that all about? thanks for the fast reply's!
you need to unlock your bootloader first
Yep, unlock your bootloader first.
Here are the steps for that
http://forum.xda-developers.com/showthread.php?t=2224020
Okay i unlocked the bootloader ( when im in the S/W upgrade screen it says unlocked at the top..) i have clockworkmod installed but i cant install anything... All the zips give: assert failed,status 7.. Now im in a bootloop. I can go into clockword mod but thats about it. I have tried other zips than the Nightlys from cyanogen but nothing works. WTF
ragdoll20 said:
Okay i unlocked the bootloader ( when im in the S/W upgrade screen it says unlocked at the top..) i have clockworkmod installed but i cant install anything... All the zips give: assert failed,status 7.. Now im in a bootloop. I can go into clockword mod but thats about it. I have tried other zips than the Nightlys from cyanogen but nothing works. WTF
Click to expand...
Click to collapse
In the general section there's a thread callled flashable CM 10.1 FIX P880 (or similar).
The status 7 error occurs because of a little line (p880 instead of x3 for device recognition).
Install the CM from there or try to reinstall CWM through ROM Manager (should be latest and working)
And don't forget the GApps (from goo.im or the thread with the fixed CM)
EDIT: Link to the fix http://forum.xda-developers.com/showthread.php?t=2238814
ImInMunichBitch said:
In the general section there's a thread callled flashable CM 10.1 FIX P880 (or similar).
The status 7 error occurs because of a little line (p880 instead of x3 for device recognition).
Install the CM from there or try to reinstall CWM through ROM Manager (should be latest and working)
And don't forget the GApps (from goo.im or the thread with the fixed CM)
EDIT: Link to the fix http://forum.xda-developers.com/showthread.php?t=2238814
Click to expand...
Click to collapse
Thanks a bunch! I didnt find that thread, i will try it now!
ImInMunichBitch said:
In the general section there's a thread callled flashable CM 10.1 FIX P880 (or similar).
The status 7 error occurs because of a little line (p880 instead of x3 for device recognition).
Install the CM from there or try to reinstall CWM through ROM Manager (should be latest and working)
And don't forget the GApps (from goo.im or the thread with the fixed CM)
EDIT: Link to the fix http://forum.xda-developers.com/showthread.php?t=2238814
Click to expand...
Click to collapse
IT WORKED!! YOU JUST MADE MY DAY! PM me and i'll give your reward :laugh:
ragdoll20 said:
IT WORKED!! YOU JUST MADE MY DAY! PM me and i'll give your reward :laugh:
Click to expand...
Click to collapse
I'm glad that I helped you, but I really don't want some kind of reward
Just click the thanks button and donate to our developers if you want to give a reward
to the people who deserve it
In the steps for installing CM, there is the advice to do a nandroid backup of the existing system!
Is it possible, after wiping and installing CM 10.1, to restore only data, so I would have all my Apps and Userdata back, or would this cause problems with CM 10.1 settings?
Has someone tried this already?
Is CWM after wiping and installing still present?
Bogeyof said:
In the steps for installing CM, there is the advice to do a nandroid backup of the existing system!
Is it possible, after wiping and installing CM 10.1, to restore only data, so I would have all my Apps and Userdata back, or would this cause problems with CM 10.1 settings?
Has someone tried this already?
Is CWM after wiping and installing still present?
Click to expand...
Click to collapse
CWM ist still installed after CM 10.1 flash.
If you want to have your apps + data back install titanium,
though I don't really know about restoring a backup on CM
(but it's a different android so I think it wouldn't work)
ImInMunichBitch said:
CWM ist still installed after CM 10.1 flash.
If you want to have your apps + data back install titanium,
though I don't really know about restoring a backup on CM
(but it's a different android so I think it wouldn't work)
Click to expand...
Click to collapse
Thanks, but I tried with Titanium Backup on V20a (after wiping and installing V20a over V10h) and not all Apps was correctly restored, settings of system, all the screens of Nova Launcher, the Widgets and their settings and many more was wrong or not restored, so I tried with restoring only "data" from CWM-Backup and it works perfectly...
Anyone tried this on CM 10.1?
Glad that it worked
Didn't know that.
Sent from my LG-P880
Please help me! I'm familiar with Android flashing. I had more devices with custom roms so I don't know what should I dow now...
I have clockworkmod recovery. Factory reset and a fresh installed rom.
I wait more than 10 minutes after first boot without any response. Screen stays black.
Stock GB rom works without problem but I can not install CM.
CM ROMs not installing on my 5570 mini. What sould I do?
I have tried three recovery versions.
. cwm-touch-5.0.2.8-mini
. CWMR-6.0.2.7-StableV1.0-tass
. CWM-6.0.5.0-tass
Which one should I use?
I prefer CM11 rom: http://forum.xda-developers.com/showthread.php?t=2715958
But I would be satisfied with a CM10 rom too. I tried CM10 from tass without success.
I have tried CM9 too. It has started but after system get in, phone freezes. I can't use CM9.
Main phone of mine is a Galaxy S3 and I had xperia and htc modells as well. I don't know what I'm doing wrong with galaxy mini. Would it be a problem if my phone is carrier locked?
These steps I'm following:
. Install stock GB ROM. (It's booting and works like charm).
. Install custom recovery.
. Do full wipe
. Install CM
. Wipe dalvik cache
. Reboot
. Phone doesn't start, screen stays black more than 10 min
Are there any specific step I skip anywhere?
Which stock rom do you use before install CM? Is it matters?
I'm very thankful about any ideas.
Please give me some advice!
Any update on this?