[Q] factoryfs.img - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

My phone was bricked. (Able to go into download not recovery.) And it is stuck at firmware update fail , please connect phone and use samsung kies etc page when i boot my phone. So i went online search and i am able to pit my phone . So i try using pit via odin and it is stuck at factoryfs.img. does the stock rom i tried install affects the pit file ? What should i do now ????

Which pit file where you using and what model and size phone do you have?
Sent from my GT-N7000 using xda premium

SpyderTracks said:
Which pit file where you using and what model and size phone do you have?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I am using the galaxy note n7000 and the n7000_16gb.pit which everysite stated.

donomeoww said:
I am using the galaxy note n7000 and the n7000_16gb.pit which everysite stated.
Click to expand...
Click to collapse
If you're sure it's the correct pit file then it sounds like it's superbricked. Have you tried flashing stock gb via pc odin?
Sent from my GT-N7000 using xda premium

SpyderTracks said:
If you're sure it's the correct pit file then it sounds like it's superbricked. Have you tried flashing stock gb via pc odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I download the stock at sammobile.

I had that to for one time, i disconnected from odin and try to flash it for second time. and believe me or not, it flashed 100% after that

bjornberfelo said:
I had that to for one time, i disconnected from odin and try to flash it for second time. and believe me or not, it flashed 100% after that
Click to expand...
Click to collapse
I tried like 5 times diaconnecting from odin , still stuck at factoryfs.img...

claim warranty if you have..
if not, check below post as the last resort
http://forum.xda-developers.com/showthread.php?t=1667886

Try changing the USB CABLE !!! Just try it .........
B4 this had happend wiz me too ........... So when i was getin the msg " update fail , please connect phone and use samsung kies " i went into the download mode and used another USB CABLE OF MY WAVE 533 and i had also used 16 gb Pit files ....... Fortunately tht had worked 4 me ........ Hope it helps !! and don't panic ....... It happens with most of us .... So just stay calm and do it right !!

Related

Galaxy s not booting....

Evening friends i need your help lol
Right this is what happened, i made a backup of my rom then flashed cynogen mod and after a little play i didnt like it so i went to do a restore and now my phone hangs on the galaxy s screen?
I cant even get into recovery (vol up/home/power as the screen flashes at the galaxy s boot n dont do anything???
please help
Is download mode working (volume down+power+home)?
Sent from my GT-I9000 using XDA Premium App
Hi.
I am new to all this but yes download mode does work.
Im gutted and really want my phone back lol
I have just put the usb in my phone and there is a little circle icon in the middle of the screen ? (the phone is off btw) ?????
chrisvr4 said:
I have just put the usb in my phone and there is a little circle icon in the middle of the screen ? (the phone is off btw) ?????
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=991792
download and reflesh your phone , there is tutorial also
Download stock gingerbread or darky rescue center. Open odin and put all files in right place and tick repartition. Now put your phone in download mode, connect it to pc and when odin recognize it just click start.
Wait for it to boot l.
Thats all
Sent from my GT-I9000 using XDA Premium App
thanks for the replies guys but can you give me links for the stuff i need to get it sorted please.
chris.
Edit: before it all went wrong i was running stock rom 2.2.1 i believe not gingerbread as kies said no update for my device. Can i go back to stock ?
chrisvr4 said:
thanks for the replies guys but can you give me links for the stuff i need to get it sorted please.
chris.
Edit: before it all went wrong i was running stock rom 2.2.1 i believe not gingerbread as kies said no update for my device. Can i go back to stock ?
Click to expand...
Click to collapse
download this (latest GB release) :
http://dl.dropbox.com/u/19506141/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
extract files (.EXE) and put the files in right place in odin.
check repartition, put phone in dowload mode and then connect with odin.
you can root your phone with :
http://dl.dropbox.com/u/19506141/Gingerbread-GT-I9000-XWJVH-stock-kernel+hacks.tar
After your phone reboots, put in download again and put the file you just dowloaded in PDA (make sure repartition is NOT checked !!)
also odin 1.3 / 1.7 and samsung drivers for PC....
http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
http://dl.dropbox.com/u/19506141/flash en drivers/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
idiot's guide
MeBeSad said:
http://forum.xda-developers.com/showthread.php?t=991792
download and reflesh your phone , there is tutorial also
Click to expand...
Click to collapse
It's 4.20 am... I am stupid; very stupid & I am panicing about my phone and this has worked..... thank the deity/s of your choice!!!
Guys much appreciate your help
I have got kies installed and the drivers would be already there yeah? or do i delete kies and install the usb drivers posted above ?
And the gingerbread i dloaded where in odin do i put the files after extracted and what about the pit files in odin? Sorry for all the Q's but im new to all this.
Right managed to put the files in odin v1.7 but what pit files do i use as there is 3 of them?
512 pit file
Sent from my GT-I9000 using XDA Premium App
phew!! a reply at last thank you!
in odin is there anything else to be ticked? phone bootloader update, phone EFS clear? or just tick th repartion?
cheers
You must tick 4 of them. Two should be ticked when you open odin. Other two that you should tick are repartition and phone bootloader update
Sent from my GT-I9000 using XDA Premium App
chrisvr4 said:
Guys much appreciate your help
I have got kies installed and the drivers would be already there yeah? or do i delete kies and install the usb drivers posted above ?
And the gingerbread i dloaded where in odin do i put the files after extracted and what about the pit files in odin? Sorry for all the Q's but im new to all this.
Click to expand...
Click to collapse
if i where you i'd delete everything from kies....
then install usb drivers....
extraxt GB .exe file.
youll get 3 files : PDA / PHONE / CSC
put them in odin : PDA--PDA / PHONE--PHONE / CSC--CSC
get pit512 file from odin .EXE
check repartition.
phone in download and connect to odin, and pres start
themate1987 said:
You must tick 4 of them. Two should be ticked when you open odin. Other two that you should tick are repartition and phone bootloader update
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
when i open odin the 2 boxes that are ticked are AUTO-REBOOT F.RESET TIME and the unticked boxes are DUMP, PHONE EFS CLEAR, PHONE BOOTLOADER UPDATE, RE PARTITION so i tick all those yeah ?
I am not on my pc so i cant answer
Sent from my GT-I9000 using XDA Premium App
chrisvr4 said:
when i open odin the 2 boxes that are ticked are AUTO-REBOOT F.RESET TIME and the unticked boxes are DUMP, PHONE EFS CLEAR, PHONE BOOTLOADER UPDATE, RE PARTITION so i tick all those yeah ?
Click to expand...
Click to collapse
leave all checks as they are, do not check EFS clear or bootloader box or dump.
the only box you have to check is repartition
Got you right going to see if i can bring it back to life now.
Will post up my result.
Thanks very much guys
chrisvr4 said:
Got you right going to see if i can bring it back to life now.
Will post up my result.
Thanks very much guys
Click to expand...
Click to collapse
your welcome, if you have problems report here and i will help you.
im home till 14:30

need help going back to stock

hello i want to go back to stock rom i have theese files downloaded
CSC-I9000XAJF3
PDA-CODE-I9000XXJF3
PHONE-MODEM-I9000XXJF3
will i need any other files and what options do i have to have ticked in 0din
You will need a pit file
Sent from my GT-I9000 using XDA
can you give me a link for that plz
Here is your Link for 512.pit
https://rapidshare.com/#!download|6....rar|0|R~05B4DDF69DE273699D46DE61B6D89EEF|0|0
If you flash with odin you have to Tick re-partiton
Sent from my GT-I9000 using XDA
thank you my friend so i select all the files in odin put my phone in download mode and wait
huzi7868 said:
thank you my friend so i select all the files in odin put my phone in download mode and wait
Click to expand...
Click to collapse
When you select all files in odin and Tick re partition
Boot you phone into the DownloadMode and connect it to your PC
In odin there should be a yellow Icon ... then you can press start and wait till it's finish
Sent from my GT-I9000 using XDA
kies says your device does not support software updating via kies
huzi7868 said:
kies says your device does not support software updating via kies
Click to expand...
Click to collapse
You have 2.3.6 , right ?
Sent from my GT-I9000 using XDA
Dear u need pit file to flash the firmware
ahsanjavaid said:
Dear u need pit file to flash the firmware
Click to expand...
Click to collapse
I said that already ...
Sent from my GT-I9000 using XDA
no mine says 2.1 update
Try this Firmware :
https://rapidshare.com/#!download|6...175963|R~8502AEA102345431AF9B50405DA04723|0|0
Sent from my GT-I9000 using XDA
WTF same file as before 2.1

[Q] my phone has emmc bug but all of method doesnt work on it!!!

hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
king-heart said:
hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
Click to expand...
Click to collapse
Should try this http://forum.xda-developers.com/showthread.php?t=1667886
You'll have to identify the bad partition and then manualy rebuild the partition table with ADB.
You'll lose up to 3gb of space and stock roms will probably not work anymore without fc's. Cm based roms usually work best after emmc brick revival.
Sent from my GT-N7000 using xda premium
i tried all but doesnt work
SpyderTracks said:
You'll lose up to 3gb of space and stock roms will probably not work anymore without fc's. Cm based roms usually work best after emmc brick revival.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
yes i know that but the problem is this i use all of this method but i cant revival my phone cuz i cant access to recovery and when i turn on my phone i infront with a message that show a triangle between a pc and a phone and says use kiess. i use pit method without accesing to recovery cuz of this i flash all of pit files one by one but doesn't get any way to revival my phone.
screenshot of my phone
lionelia said:
Should try this http://forum.xda-developers.com/showthread.php?t=1667886
You'll have to identify the bad partition and then manualy rebuild the partition table with ADB.
Click to expand...
Click to collapse
i attached screenshot of my phone . i couldnt access to recovery .
After flashing pit file did you try and flash a kernel like Phillz?
Sent from my GT-N7000 using xda premium
pit files couldnt set
SpyderTracks said:
After flashing pit file did you try and flash a kernel like Phillz?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thanks . actually not . cuz none of pit file couldnt set on my partition and stuck in odin.can i flash this kernel without flash pit?
new problem
now i have a bigger probem .my battery is out of charge and when i plug in phone to adapter it start bootllop and i cant enter in download mode cuz of low battery
help me plz
help me for 1 month im working on my phone :silly::silly::silly::crying::crying::crying:
Remove the battery. Put back. Then plug the charger and let the phone charge for a couple of hours before you boot into download mode again?
Buy an external battery charger. They are very cheap
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
My phone was bricked.
And I use hg42 revival method.
Simply go into download mode.
Use odin pc to flash stock rom (gingerbread preferred).
And....
Choose the pit from hg42, tick repartition.
Flash.
Voila. It is up alrd with a lost of 3gb. But I didn't care since I have ext sd.
PS:
It will be good if u know how to identify the bad block first. So u can choose the correct pit file to do repartition of ur device.
And.... u better charge ur battery first, no matter how r u goin to do it. I m sure u don't want to get worst while flash with odin pc, and ur battery dead.
^_^
Sent from N7105, at the corner of this rounded earth.
king-heart said:
hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
Click to expand...
Click to collapse
Check md5 sum of downloaded file...
I think it's the download of the file.
than try this-http://forum.xda-developers.com/showthread.php?t=1667886
After that try to flash PhilZ kernel (look for .tar file in Philz thread and flash via ODIN-i don't preffer ODIN but since u got nothing else u have to flash via ODIN PhilZ kernel) and some custom TW JB ROM from CWM that comes with PhilZ kernel.
So everything should be working or?
nokiamodeln91 said:
Remove the battery. Put back. Then plug the charger and let the phone charge for a couple of hours before you boot into download mode again?
Click to expand...
Click to collapse
Thank u i solve battery problem by changing with my friends but other problem . I couldnt install recovery to solve with pit fils
king-heart said:
Thank u i solve battery problem by changing with my friends but other problem . I couldnt install recovery to solve with pit fils
Click to expand...
Click to collapse
You just need download mode to flash pit file. Then once complete flash Phillz kernel.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
You just need download mode to flash pit file. Then once complete flash Phillz kernel.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I flash all of patched pit file but doesnt work i flash more than 100 pit file.
king-heart said:
I flash all of patched pit file but doesnt work i flash more than 100 pit file.
Click to expand...
Click to collapse
You have to do it manualy with your brain and your hands.
With ADB you can check each partitions to find the one faultly and then create new one.
you will loose space on mass storage (UMS partition) but your phone will work.
So are you still on stock recovery? After flashing PIT you need to format emmc, data, cache and system before flashing new ROM with Odin. You need custom kernel for that.
Also, did you do factory reset with CWM.zip before you bricked?
Sent from my GT-N7000 using xda app-developers app
Ah!why are people using odin when flashing from phone is so easy???!!!i did not use odin.now i have philz kernel and ultimate jb rom v5.1
And i also live in iran!
Sent from my GT-N7000 using xda premium
sepehrthegreat-iran said:
Ah!why are people using odin when flashing from phone is so easy???!!!i did not use odin.now i have philz kernel and ultimate jb rom v5.1
And i also live in iran!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
its because he has bricked the phone and no access to recovery currently. also Odin (PC/Mobile) is the only way to get back a stock official rom

[Q] Bricked S III mini 'N'

Hi there,
So my phone restarted and showed a screen with corrupt blocks on it after an update with ROM toolbox pro...
Nothing happens when I try to turn it on apart from the corrupted screen.
The device does boot into download mode if I press the key combo and I have tried reflashing a whole selection of images via odin without luck.
I have also tried the PARAM_I8190.tar.md5 fix but Odin complains I have no PIT partition.
I tried to flash the goldenxx.pit in Odin but it reports that the partition cannot be written...
It is a UK model from Virgin (8GB)
Help please!!!
Try 8190N pit file here its on page 2
http://forum.xda-developers.com/showthread.php?t=2273826
Sent from my GT-I8190 using Tapatalk 2
Woo!
kicker63 said:
Try 8190N pit file here its on page 2
http://forum.xda-developers.com/showthread.php?t=2273826
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
I love you so much
Feared I bricked my wife's phone!
Managed to flash PIT and now going to reflash image.
Do you know why this could have happened?
You flashed wrong pit for a start. Always flash correct firmware for your phone. Keep that PIT handy just in case you need it again. What did you update with Rom Toolbox that caused it.
Sent from my GT-I8190 using Tapatalk 2

Urgent Help .... GT-N7000 fail on nand write in Odin

Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?
matrixlover said:
Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?
Click to expand...
Click to collapse
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.
albatron34 said:
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.
Click to expand...
Click to collapse
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive
matrixlover said:
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive
Click to expand...
Click to collapse
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85
albatron34 said:
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85
Click to expand...
Click to collapse
should be Odin3_v1.85 or may bey higher v3.09 ?
matrixlover said:
should be Odin3_v1.85 or may bey higher v3.09 ?
Click to expand...
Click to collapse
for me i bricked my phone after wrong flash; i used odin 1.85 and pit file 16GB and officiel stock jbrom and my phone now is ok.
good step by step guide :
http://www.androidayos.com/2012/09/...galaxy-note-n7000-unbrick-and-recovery-guide/
I'm tried using odin 1.85 but it stuck when i tried to use pit file & now i tried to ener download mode it shows me use volume up but when i click the screen goes black may be the battery even i charged it externally i'll try to get another battery but now i stuck what shall i do ?
why no replay anyone help me
matrixlover said:
why no replay anyone help me
Click to expand...
Click to collapse
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk
ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
So there any idea to put the right one using anything or what ?!
matrixlover said:
So there any idea to put the right one using anything or what ?!
Click to expand...
Click to collapse
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk
ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
AndroidSlave said:
Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
AndroidSlave said:
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
I'm sorry if i get u tar is flashed & repartitioned but u mean with Philz the tar file ? & philztouch file what do u mean exactly ?

Categories

Resources