[Q] Bricked S III mini 'N' - Galaxy S III Mini Q&A, Help & Troubleshooting

Hi there,
So my phone restarted and showed a screen with corrupt blocks on it after an update with ROM toolbox pro...
Nothing happens when I try to turn it on apart from the corrupted screen.
The device does boot into download mode if I press the key combo and I have tried reflashing a whole selection of images via odin without luck.
I have also tried the PARAM_I8190.tar.md5 fix but Odin complains I have no PIT partition.
I tried to flash the goldenxx.pit in Odin but it reports that the partition cannot be written...
It is a UK model from Virgin (8GB)
Help please!!!

Try 8190N pit file here its on page 2
http://forum.xda-developers.com/showthread.php?t=2273826
Sent from my GT-I8190 using Tapatalk 2

Woo!
kicker63 said:
Try 8190N pit file here its on page 2
http://forum.xda-developers.com/showthread.php?t=2273826
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
I love you so much
Feared I bricked my wife's phone!
Managed to flash PIT and now going to reflash image.
Do you know why this could have happened?

You flashed wrong pit for a start. Always flash correct firmware for your phone. Keep that PIT handy just in case you need it again. What did you update with Rom Toolbox that caused it.
Sent from my GT-I8190 using Tapatalk 2

Related

How to downgrade XXJM6?

Seems there are some asking in the XXJM6 thread but usually it gets buried with posts specifically for flashing the FW.
I tried downgrading using different PIT files and FWs but it would fail via ODIN.
Is there a way to downgrade XXJM6 and how?
Thanks.
Sent from my GT-P1000 using Tapatalk
Are you on the first or second versions of JM6?
2nd version but came from the 1st XXJM6 leak
Sent from my GT-P1000 using Tapatalk
try flashing LHA with repartition on and then another firmware..
xIllu said:
try flashing LHA with repartition on and then another firmware..
Click to expand...
Click to collapse
I think he meant JHA, and i agree.
Try to flash JHA with its PIT file and repartition and to upgrade to JJ4 from that.
Let us know if that worked.
xIllu said:
try flashing LHA with repartition on and then another firmware..
Click to expand...
Click to collapse
JHA you mean? Yup tried that with 816 PIT but it will immediately fail.
Sent from my GT-P1000 using Tapatalk
clubtech said:
I think he meant JHA, and i agree.
Try to flash JHA with its PIT file and repartition and to upgrade to JJ4 from that.
Let us know if that worked.
Click to expand...
Click to collapse
Never tried JJ4, will give it a try then post the result.
EDIT: tried JJ4 - FAIL. Same goes with almost all the fw posted in samfirmware website. So i guess to those who flashed to JM6, we are stuck!! Good thing JM6 is a good fw. Still hoping a workaround though.
Sent from my GT-P1000 using Tapatalk
have you tried the following?
1) Factory reset via HOME + VOL UP + POWER
2) Flash PIT only first (use the P1 from SAMFIRMWARE)
3) Flash JJ4 (make sure have dbdata file inside)
bdigitalstudio said:
have you tried the following?
1) Factory reset via HOME + VOL UP + POWER
2) Flash PIT only first (use the P1 from SAMFIRMWARE)
3) Flash JJ4 (make sure have dbdata file inside)
Click to expand...
Click to collapse
I have tried this too, still would fail. Anyone who successfully downgraded from JM6?
What do you mean, make sure you have dbdata file inside?
Sent from my GT-P1000 using Tapatalk
antz88c said:
I have tried this too, still would fail. Anyone who successfully downgraded from JM6?
What do you mean, make sure you have dbdata file inside?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Open the TAR file using WINRAR or something and see for a file called DBDATA. This file is a must after PIT programming.
bdigitalstudio said:
Open the TAR file using WINRAR or something and see for a file called DBDATA. This file is a must after PIT programming.
Click to expand...
Click to collapse
Meaning after flashing PIT, flash dbdata then JJ4?
Sent from my GT-P1000 using Tapatalk
antz88c said:
Meaning after flashing PIT, flash dbdata then JJ4?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
open the JJ4.TAR with WinRAR and you should see the DBDATA file inside. if it is not, find the firmware which has it..
bdigitalstudio said:
open the JJ4.TAR with WinRAR and you should see the DBDATA file inside. if it is not, find the firmware which has it..
Click to expand...
Click to collapse
Thanks but didn't work.
Sent from my GT-P1000 using Tapatalk
Well i was able to downgrade from JM6 to ANY firmware, but i never used the 2nd version of JM6 nor the full flash of JJ4, i was only flashing the pda part so far.
Note that my firmware was BUJI4 when i got the tablet.
sedde said:
Well i was able to downgrade from JM6 to ANY firmware, but i never used the 2nd version of JM6 nor the full flash of JJ4, i was only flashing the pda part so far.
Note that my firmware was BUJI4 when i got the tablet.
Click to expand...
Click to collapse
Really strange, tried also flashing only the pda but odin will immediately fail. I have flashed again with the first JM6.
Sent from my GT-P1000 using Tapatalk
antz88c said:
Really strange, tried also flashing only the pda but odin will immediately fail. I have flashed again with the first JM6.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I have never flashed no modem or csc or repartitioned my flash , so i guess thats why i can downgrade.
Seems like u can downgrade if you don't use repartition however it is not clear why Odin fails if we try to repartition ...
Sent from my GT-P1000 using XDA App
Euro Galaxy Tab can´t downgrade...
I installed the JM6 taken from the first post of this thread: http://forum.xda-developers.com/showthread.php?t=854300
V1.7 ODIN3 flashing with files that included his pit (to repartition marked), PDA, CSC, and PHONE ...
When I tried to other ROMs have been impossible before. Consistent with ODIN errors that interrupt the process and let the tablet dead. Resusitaste flashing is only possible from the outset JM6 ...
It is an excellent ROM (fixed the Swype extrallendo and installing a ROM that came before).
Anyway, to be calmer, we expect a possible solution. Thanks.
Did you guys try one of the full newer than JJ4 firmwares from gsmpl.com ?
Those are full Odin separated pit/pda/csc/modem JJ6, JJ7 and JK2.
Look for P1000->... http://gsmpl.com/index.php?id=Do_Pobrania
No idea if it will downgrade. Just trying to help.
Yes, and NO, that doesn't work either...
FredBE said:
Did you guys try one of the full newer than JJ4 firmwares from gsmpl.com ?
Those are full Odin separated pit/pda/csc/modem JJ6, JJ7 and JK2.
Look for P1000->... http://gsmpl.com/index.php?id=Do_Pobrania
No idea if it will downgrade. Just trying to help.
Click to expand...
Click to collapse

[Q] factoryfs.img

My phone was bricked. (Able to go into download not recovery.) And it is stuck at firmware update fail , please connect phone and use samsung kies etc page when i boot my phone. So i went online search and i am able to pit my phone . So i try using pit via odin and it is stuck at factoryfs.img. does the stock rom i tried install affects the pit file ? What should i do now ????
Which pit file where you using and what model and size phone do you have?
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Which pit file where you using and what model and size phone do you have?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I am using the galaxy note n7000 and the n7000_16gb.pit which everysite stated.
donomeoww said:
I am using the galaxy note n7000 and the n7000_16gb.pit which everysite stated.
Click to expand...
Click to collapse
If you're sure it's the correct pit file then it sounds like it's superbricked. Have you tried flashing stock gb via pc odin?
Sent from my GT-N7000 using xda premium
SpyderTracks said:
If you're sure it's the correct pit file then it sounds like it's superbricked. Have you tried flashing stock gb via pc odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I download the stock at sammobile.
I had that to for one time, i disconnected from odin and try to flash it for second time. and believe me or not, it flashed 100% after that
bjornberfelo said:
I had that to for one time, i disconnected from odin and try to flash it for second time. and believe me or not, it flashed 100% after that
Click to expand...
Click to collapse
I tried like 5 times diaconnecting from odin , still stuck at factoryfs.img...
claim warranty if you have..
if not, check below post as the last resort
http://forum.xda-developers.com/showthread.php?t=1667886
Try changing the USB CABLE !!! Just try it .........
B4 this had happend wiz me too ........... So when i was getin the msg " update fail , please connect phone and use samsung kies " i went into the download mode and used another USB CABLE OF MY WAVE 533 and i had also used 16 gb Pit files ....... Fortunately tht had worked 4 me ........ Hope it helps !! and don't panic ....... It happens with most of us .... So just stay calm and do it right !!

[Q] my phone has emmc bug but all of method doesnt work on it!!!

hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
king-heart said:
hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
Click to expand...
Click to collapse
Should try this http://forum.xda-developers.com/showthread.php?t=1667886
You'll have to identify the bad partition and then manualy rebuild the partition table with ADB.
You'll lose up to 3gb of space and stock roms will probably not work anymore without fc's. Cm based roms usually work best after emmc brick revival.
Sent from my GT-N7000 using xda premium
i tried all but doesnt work
SpyderTracks said:
You'll lose up to 3gb of space and stock roms will probably not work anymore without fc's. Cm based roms usually work best after emmc brick revival.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
yes i know that but the problem is this i use all of this method but i cant revival my phone cuz i cant access to recovery and when i turn on my phone i infront with a message that show a triangle between a pc and a phone and says use kiess. i use pit method without accesing to recovery cuz of this i flash all of pit files one by one but doesn't get any way to revival my phone.
screenshot of my phone
lionelia said:
Should try this http://forum.xda-developers.com/showthread.php?t=1667886
You'll have to identify the bad partition and then manualy rebuild the partition table with ADB.
Click to expand...
Click to collapse
i attached screenshot of my phone . i couldnt access to recovery .
After flashing pit file did you try and flash a kernel like Phillz?
Sent from my GT-N7000 using xda premium
pit files couldnt set
SpyderTracks said:
After flashing pit file did you try and flash a kernel like Phillz?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thanks . actually not . cuz none of pit file couldnt set on my partition and stuck in odin.can i flash this kernel without flash pit?
new problem
now i have a bigger probem .my battery is out of charge and when i plug in phone to adapter it start bootllop and i cant enter in download mode cuz of low battery
help me plz
help me for 1 month im working on my phone :silly::silly::silly::crying::crying::crying:
Remove the battery. Put back. Then plug the charger and let the phone charge for a couple of hours before you boot into download mode again?
Buy an external battery charger. They are very cheap
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
My phone was bricked.
And I use hg42 revival method.
Simply go into download mode.
Use odin pc to flash stock rom (gingerbread preferred).
And....
Choose the pit from hg42, tick repartition.
Flash.
Voila. It is up alrd with a lost of 3gb. But I didn't care since I have ext sd.
PS:
It will be good if u know how to identify the bad block first. So u can choose the correct pit file to do repartition of ur device.
And.... u better charge ur battery first, no matter how r u goin to do it. I m sure u don't want to get worst while flash with odin pc, and ur battery dead.
^_^
Sent from N7105, at the corner of this rounded earth.
king-heart said:
hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
Click to expand...
Click to collapse
Check md5 sum of downloaded file...
I think it's the download of the file.
than try this-http://forum.xda-developers.com/showthread.php?t=1667886
After that try to flash PhilZ kernel (look for .tar file in Philz thread and flash via ODIN-i don't preffer ODIN but since u got nothing else u have to flash via ODIN PhilZ kernel) and some custom TW JB ROM from CWM that comes with PhilZ kernel.
So everything should be working or?
nokiamodeln91 said:
Remove the battery. Put back. Then plug the charger and let the phone charge for a couple of hours before you boot into download mode again?
Click to expand...
Click to collapse
Thank u i solve battery problem by changing with my friends but other problem . I couldnt install recovery to solve with pit fils
king-heart said:
Thank u i solve battery problem by changing with my friends but other problem . I couldnt install recovery to solve with pit fils
Click to expand...
Click to collapse
You just need download mode to flash pit file. Then once complete flash Phillz kernel.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
You just need download mode to flash pit file. Then once complete flash Phillz kernel.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I flash all of patched pit file but doesnt work i flash more than 100 pit file.
king-heart said:
I flash all of patched pit file but doesnt work i flash more than 100 pit file.
Click to expand...
Click to collapse
You have to do it manualy with your brain and your hands.
With ADB you can check each partitions to find the one faultly and then create new one.
you will loose space on mass storage (UMS partition) but your phone will work.
So are you still on stock recovery? After flashing PIT you need to format emmc, data, cache and system before flashing new ROM with Odin. You need custom kernel for that.
Also, did you do factory reset with CWM.zip before you bricked?
Sent from my GT-N7000 using xda app-developers app
Ah!why are people using odin when flashing from phone is so easy???!!!i did not use odin.now i have philz kernel and ultimate jb rom v5.1
And i also live in iran!
Sent from my GT-N7000 using xda premium
sepehrthegreat-iran said:
Ah!why are people using odin when flashing from phone is so easy???!!!i did not use odin.now i have philz kernel and ultimate jb rom v5.1
And i also live in iran!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
its because he has bricked the phone and no access to recovery currently. also Odin (PC/Mobile) is the only way to get back a stock official rom

[Q] GT-I8190L in BootLoop

I am very familiar with the hole ODIN&Root&Flash system with the Samsung Galaxy devices and my friends see me with my super Galaxy S3 overmodified and think is just plain easy so a friend of mine tried to root his Galaxy S3 Mini L version (Central and South American version) and after I don't know what he did his device just didn't woke up and is just trapped in the Galaxy Bootscreen, not even entering into the boot amination.
I kinda had a suspicion that he flashed a rooted ROM that was for the international Mini (the one without a L) IDK if it changes something or if the versions of this smartphone have something different in the insides, but I already tried flashing the WIPE_I8190.zip with ODIN and it failed to pass the bootscreen, I also flashed the Stock Firmware from SamMobile that is for the Mexican Version which is this smartphone (IUSACELL) and it passed successfully but it is stuck again
Do someone have any idea of how to save this poor smartphone?!
Try this, flash in PDA in Odin. Hope it helps you.
http://forum.xda-developers.com/attachment.php?attachmentid=1597045&d=1356657742
Sent from my GT-I8190 using xda premium
Thank you so much it actually worked!! but if you can tell me, what did the file make?!
Get rid of boot loop, save that file just in case you need again. So many people have this problem
Sent from my GT-I8190 using xda premium
I have the same problem
kicker63 said:
Get rid of boot loop, save that file just in case you need again. So many people have this problem
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
Hello dears! i have the same problem, my samsung GT-I8190L stays in the samsung logo (bootloop),
I tried flashing PARAM_8190.zip, wipe_8190 an original firmware and custom firmware.. and nothing.. is staying in bootloop. I was told to install from odin the bootloader, pda, phone, csc and PIT file. Then I have a problem, where to find these files for my Samsung Galaxy Mini GT-I8190L s3?. thank you very much! :fingers-crossed:
Flash the PARAM in PDA in Odin only. Don't mess with the PIT file.
Sent from my GT-I8190 using Tapatalk 2
I have the same problem (BOOTLOOP)
kicker63 said:
Flash the PARAM in PDA in Odin only. Don't mess with the PIT file.
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
Already did, friend and not result, so I need the bootloader file and in any case the pit file, because with those files I was told that could revive my terminal. Thanks again!: D
abelrolon77 said:
Already did, friend and not result, so I need the bootloader file and in any case the pit file, because with those files I was told that could revive my terminal. Thanks again!: D
Click to expand...
Click to collapse
You can find the pit file in the unbrick thread, you really dont need an pit file if odin doesn't give you pit errors
Can you boot into recovery? vol-up+home+power?
Same Problem (bootloop)
AssToast said:
You can find the pit file in the unbrick thread, you really dont need an pit file if odin doesn't give you pit errors
Can you boot into recovery? vol-up+home+power?
Click to expand...
Click to collapse
oh! negative I can not access the recovery mode, but yes in download mode!. I tried flashing custom rom and original rom. and accomplished nothing
abelrolon77 said:
oh! negative I can not access the recovery mode, but yes in download mode!. I tried flashing custom rom and original rom. and accomplished nothing
Click to expand...
Click to collapse
just download your stock firmware from here http://www.sammobile.com/firmwares/1/?model=GT-I8190L&pcode=0#firmware
put it in pda. no need for pit file. make sure re-partition is unchecked.
if you stuck in bootloop after finishing, flash param as pda.
Samsung Galaxy s3mini (bootloop)
samersh72 said:
just download your stock firmware from here (URL)
put it in pda. no need for pit file. make sure re-partition is unchecked.
if you stuck in bootloop after finishing, flash param as pda.
Click to expand...
Click to collapse
Dear, i tried as you said and can not get anything! continue rebooting my GT-i8190L
postdata: i can´t acces to recovery mode, but i can acces to download mode! Thanks friends.
abelrolon77 said:
Dear, i tried as you said and can not get anything! continue rebooting my GT-i8190L
postdata: i can´t acces to recovery mode, but i can acces to download mode! Thanks friends.
Click to expand...
Click to collapse
[HOW-TO] Enable Three Button Combo [RECOVERY]
If it doesn't work, flash a separate recovery. [RECOVERY] CWM/TWRP/STOCK [DB][ALL i8190 Models]
Samsung galaxy s mini in (BOOTLOOP) death phone??
tys0n said:
[Enable Three Button Combo [RECOVERY]
If it doesn't work, flash a separate recovery. [ [RECOVERY] CWM/TWRP/STOCK [DB][
Click to expand...
Click to collapse
Dear, i tried and nothing, is that my phone is dead? There is another solution? thanks
abelrolon77 said:
Dear, i tried and nothing, is that my phone is dead? There is another solution? thanks
Click to expand...
Click to collapse
You still can't enter recovery?
GT-i8190L
tys0n said:
You still can't enter recovery?
Click to expand...
Click to collapse
negative dear, i can't. because the file PiT show error in my phone ( custom pit error ) and the recuperation button file.
abelrolon77 said:
negative dear, i can't. because the file PiT show error in my phone ( custom pit error ) and the recuperation button file.
Click to expand...
Click to collapse
Use this Pit file and tick repartition in odin while flashing, did you already have this problem when you were flashing stock rom? try flashing the pit with stock rom
Samsung GT-I8190L (bootloop) HELP PLEASE!!!
AssToast said:
Use this and tick repartition in odin while...ted firmware, i can't acces to recovery mode!
Click to expand...
Click to collapse
abelrolon77 said:
Dear, i tried and nothing, is that my phone is dead? There is another solution? thanks
Click to expand...
Click to collapse
Did it say PASS, or did you get errors?
Samsung GT-I8190L (bootloop) HELP PLEASE!!!
tys0n said:
Did it say PASS, or did you get errors?
Click to expand...
Click to collapse
Hello friend!, I have "errors" in odin, in the method "Enable Three Button Combo" and "CWM / TWRP / STOCK [DB] [ALL i8190 Models". What I can do?. You know some page to download the official PIT, bootloader, phone an CSC file?
abelrolon77 said:
Hello friend!, I have "errors" in odin, in the method "Enable Three Button Combo" and "CWM / TWRP / STOCK [DB] [ALL i8190 Models". What I can do?. You know some page to download the official PIT, bootloader, phone an CSC file?
Click to expand...
Click to collapse
I have some service firmware for i8190 and i8190N, but not for L. I'll see if I can find any..

[need help] galaxy note brick,custom binary count

hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
NoteboyTech said:
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i have try GB firmware that contains all files the result still same.. i don't know what to do
hazwan708 said:
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
Click to expand...
Click to collapse
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
mohd syafik said:
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
Click to expand...
Click to collapse
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
ThaiDai said:
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
Click to expand...
Click to collapse
still same.. i flash pit file from hg42 thread stuck on set partition..
here i attaches the image
How will it move ahead? You have not selected any PDA files to flash.
And why did you flash that PIT file? Have you done any scans using the scanners found in that thread to determine the bad blocks?
ENter all the 3 files without PIT! and tell again!

Categories

Resources