Database Develop

galaxy note gt7000 stuck in samsung logo then it turns off

guys I need help...
I got a galaxy note gt 7000 with LC1 kernel...brought it from finland and now using it in bangladesh.it worked fine but for some strange reason when I turned it on the samsung galaxy note gt 7000 logo appears but then the display turns black and the phone turns off...in other words it doesn't boot..
I have the android 2.6.X firmwire on it...(no costum rom)...It was rooted thoughI mean I had the stock firmware with the only difference that it was rooted with odin...
right now I can't get the phone to boot but I can get into recovery and odin mode though...
how can I fix this??I already tried searching the forum but I don't know where to start...I hope it isn't bricked...I tried every wipe data option in the recovery mode but it didn't help...
:crying:

Go to this thread and download the pre rooted 2.3.6 from (or non rooted 2.3.6 if you dont ant root)
Follow the guide and reflash everything properly step by step with PC Odin
http://forum.xda-developers.com/showthread.php?t=1424997
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
Sent from my Amazon Kindle Fire using Tapatalk 2

asf58967 said:
Go to this thread and download the pre rooted 2.3.6 from (or non rooted 2.3.6 if you dont ant root)
Follow the guide and reflash everything properly step by step with PC Odin
http://forum.xda-developers.com/showthread.php?t=1424997
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
Sent from my Amazon Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
thanks a LOT...I have some stupid question though...
it says "These all are stock ROMs and this can be flashed using PC odin without exclamation mark or raising flash counter. Read installation note at end of list"
my phone gives the exclamation mark when it turns on...does that mean that I can not install these roms??
and also I don't know which country is my phone from...I mean I don't know which exact firmware I should download...all I know is that I have the LC1 kernel, the phone was brought from finland and I am currently using it here in bangladesh...
I am so sorry is just that I don't know where to start and I am panicking right now...

No, it doesn't mean you can't flash them. It just means that if you flash them, they won't raise the flash counter and won't cause the yellow triangle to appear. You can flash them safely. If you still have the yellow triangle after flashing them then use TriangleAway to remove that triangle and reset the flash counter.
Sent from my GT-N7000 using xda app-developers app

joey_oggie said:
No, it doesn't mean you can't flash them. It just means that if you flash them, they won't raise the flash counter and won't cause the yellow triangle to appear. You can flash them safely. If you still have the yellow triangle after flashing them then use TriangleAway to remove that triangle and reset the flash counter.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
thanks again...it means a lot to me...the firmware I need is for the nordic countries... I need this one N7000XXLC1 N7000OXXLB3 NEE
THE BIGGG PROBLEM IS...that since I am from bangladesh downloading a file that is 550 mb takes at least 18 hours...and the file on this forum is uploaded on hotfile which stops the download after an hour and there is no resume support...
COULD anyone give torrent links or something I really need it...I am desperate...I am not able to download it from hotfile.com :crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying:

PLEASE??:crying:
I am sorry for bugging like these I am panicking...

Wish I could help with something else... I don't know where else together them... private message dr.ketan he may know
Sent from my Amazon Kindle Fire using Tapatalk 2

asf58967 said:
Wish I could help with something else... I don't know where else together them... private message dr.ketan he may know
Sent from my Amazon Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
oki I'll try pm dr ketan...

Just remember you can use any country firmware
Sent from my Amazon Kindle Fire using Tapatalk 2
---------- Post added at 10:18 PM ---------- Previous post was at 10:13 PM ----------
You can also try custom rom that is a small download... then use Mobile Odin to flash stock with ever root after it dls
Sent from my Amazon Kindle Fire using Tapatalk 2

As asf58967 said, your best option is to message dr.ketan. He might be able to help you. I would have downloaded it myself and sent it to you directly but unfortunately I don't have ADSL at the moment, I'm using mobile internet.
There's another option though, you can try and download CyanogenMod9. It's only 150MBs.
Either way, good luck!
Sent from my GT-N7000 using xda app-developers app

asf58967 said:
Just remember you can use any country firmware
Sent from my Amazon Kindle Fire using Tapatalk 2
---------- Post added at 10:18 PM ---------- Previous post was at 10:13 PM ----------
YAs asf58967 said, your best option is to message dr.ketan. He might be able to help you. I would have downloaded it myself and sent it to you directly but unfortunately I don't have ADSL at the moment, I'm using mobile internet.
There's another option though, you can try and download CyanogenMod9. It's only 150MBs.
Either way, good luck!
Click to expand...
Click to collapse
really I can use any country's firmware??so what are actually the things I should look out for when downloading a rom??the kernel??I mean what are the precautions I should be aware of before downloading a rom??
how does the cyanogen mod9 works??the thing is I need to flash my note becouse it is stuck in the boot logo...then it turns off without booting properly...is there any risk I should take into account before flashing cyanogen mod9??

No, you won't need stock ROM if you are flashing a custom ROM. Just follow the instructions very carefully. Most important of all is to flash a safe kernel to wipe. NEVER wipe using stock ICS kernel as that will brick your phone (read about emmc bug).
Flashing CM9 works like any other ROM. You download the safe kernel and flash it using Odin PC then boot into recovery to wipe data and cache. Then copy the ROM zip file to your memory card or internal storage and flash it from recovery mode.
Sent from my GT-N7000 using xda app-developers app
---------- Post added at 11:56 PM ---------- Previous post was at 11:37 PM ----------
Also you might want to know that you will lose all Touchwiz applications when you flash CM9 like S Memo and S Pen. You can flash it until you get your hands on the stock ROM later so you can use your phone now.
Sent from my GT-N7000 using xda app-developers app

Yeah and when you get around to it use mobile odin to flash a stock rom
Sent from my GT-N7000 using Tapatalk 2

guys thanks a lot for the replies...
so here is the thing I can flash any rom i want into it right??
but I have to use a safe kernel...my question was can I use any a kernel that's different from the kernel that's on the phone?? (XXLC1)??
oki thanks a lot for the replies...I wil ltry the CMW mod9 way...I don't use s pen or s note anyway...I need the phone to work..
guys another question though...since my phone is stuck in the boot logo then it just turns black(the display of course)
won't this prevent me from flashing cm9 into it??I can still get into recovery mode and download mode...plus mine have a rooted gingerbread stock rom 2.3.6 that is apparently "soft bricked" or needs to be flashed...are there any other option such as cm9??I mean there are a lotta bugs in the CM9...maybe an older costum rom??should I get the safe kernel for cm9 before installing cm9??
thanks a again for all the help...

Nope. You don't need a working phone to flash ROMs and kernels. As long as recovery and download modes are working then you are fine.
Just boot into download mode and flash ANY safe kernel using Odin and then you can wipe data and flash any ROM you want from recovery.
For safe kernels, there are a couple of them. There's Notecore, speed mod and the one included with CM9 (might be speeemod, not sure). Check the forum you will find many of them.
I think you already have a safe kernel though. GB's stock kernel is safe as far as I know. But to be on the safe side, follow the instructions on CM9's site to the letter and you will have a working phone.
Sent from my GT-N7000 using xda app-developers app

joey_oggie said:
Nope. You don't need a working phone to flash ROMs and kernels. As long as recovery and download modes are working then you are fine.
Just boot into download mode and flash ANY safe kernel using Odin and then you can wipe data and flash any ROM you want from recovery.
For safe kernels, there are a couple of them. There's Notecore, speed mod and the one included with CM9 (might be speeemod, not sure). Check the forum you will find many of them.
I think you already have a safe kernel though. GB's stock kernel is safe as far as I know. But to be on the safe side, follow the instructions on CM9's site to the letter and you will have a working phone.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
THANKS A LOT!!!
are there any other costum rom of gingerbread that works without bugs and is like 150 mb like cm9??I mean I am not albe to download 550 mb at a time right now...
TANKS A LOT FOR THE REPLIES YOU GUYS ARE SAVING MY A*S...I love this forum I'm new but I love the help I am getting thanks much apreciated!!

SPEEDMOD AMD NOTECARE ARE NOT COMPATIBLE WITH CM9. if you have speedmod or notecore installed cm9 will NOT boot
you need a non touchwiz kernel
you can download the cm9 kernel from this link... Have the cm9 zip ready to flash on the sdcard and run it. It is safe to wipe without worry about hardbrick omce cm9 kernel is insyalled.
http://forum.xda-developers.com/showthread.php?t=1789397
**[JB][ICS][GB] Kernel Repository: New! HydraCore v1 and CM_9.1.0_Stable_Release
Sent from my GT-N7000 using Tapatalk 2

the "[GUIDE] Which Kernels are Safe/Unsafe to Wipe and Flash from" post says GB kernel is safe...I have GB kernel....but the thing is I want to install CriskeloRomNOTE. v7 and in the post it says
"CriskeloRom Note V7 No Wipe
LINK
CriskeloRomNOTE.v7-MD5-5F1906B96CA2380265104AC12D7EEF5C.zip
NOTE CriskeloRom V7
• Rom No Wipe (not erase your data)
• Kernel 4.1 AbyssNote
• Full support for BLN
• New and improved dialpad
• More wallpapers in the stock application
• Repaired, Select Wallpapers
• Jkay v13.5.1 + Spanish
• Improved response when an application
• More things that I remember and all of the previous version"
so basically it says kernel 4.1 abyssnote...does that mean that I have to install such kernel to flash this rom??
also what does "No wipe" means??that if I wipe data before flashing will it brick my phone??
I am sorry i these questions may seem stupid and very bugging I just don't want to take chances before flashing...thanks again for all the help though!!

Abyssnote is a GB based safe kernel. You cam flash that. Abyss is safe to wipe from and so is your stock gb kernel. Just do notwipe if you are on a 4.0 based kernel that is not a safe kernel. All kernels in the post i did above are safe. All gb kernels are safe to wipe in. It just says no wipe because it doesnt require one if going from certain other roms. You shoukd wipe if you choose that rom...
Flash it with pc odin with a wipe... So long as your not on ICS based kernel the wipe itsrlf should not brivk you..
Sent from my GT-N7000 using Tapatalk 2

asf58967 said:
Abyssnote is a GB based safe kernel. You cam flash that. Abyss is safe to wipe from and so is your stock gb kernel. Just do notwipe if you are on a 4.0 based kernel that is not a safe kernel. All kernels in the post i did above are safe. All gb kernels are safe to wipe in. It just says no wipe because it doesnt require one if going from certain other roms. You shoukd wipe if you choose that rom...
Flash it with pc odin with a wipe... So long as your not on ICS based kernel the wipe itsrlf should not brivk you..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
thanks again for the help man...that should def do it..so I just do the data wipe/factory reset before flashing that rom though odin right??good!!

[Q] Galaxy Note Corrupt

Hi folks... I am new here and this is my first post.
Recently bought a new Samsung Galaxy Note from the Samsung E Store. I am located in India.
Got the phone with ginger bread 2.3.6
Did update with kies desktop (for windows) to ICS 4.0.3
Got an OTA update for ICS 4.0.4 and did that as well
Saw the XXLRQ update available for the international variant of Galaxy Note and did that as well.
Saw an update available to 4.1.1 using paranoid android but phone got bricked on the process... Any help / Suggestions.....???
Need to know the best ROM as well as Kernel that I can upgrade my Note to.....

Note1305 said:
Hi folks... I am new here and this is my first post.
Recently bought a new Samsung Galaxy Note from the Samsung E Store. I am located in India.
Got the phone with ginger bread 2.3.6
Did update with kies desktop (for windows) to ICS 4.0.3
Got an OTA update for ICS 4.0.4 and did that as well
Saw the XXLRQ update available for the international variant of Galaxy Note and did that as well.
Saw an update available to 4.1.1 using paranoid android but phone got bricked on the process... Any help / Suggestions.....???
Need to know the best ROM as well as Kernel that I can upgrade my Note to.....
Click to expand...
Click to collapse
U on what kernel while install paranoid rom?
Sent from my GT-N7000 using xda premium

lee yun khong said:
U on what kernel while install paranoid rom?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hi... The Kernel that comes along with German XXLRQ as given in the "ibt times" website...
You have any suggestions on what Kernel and ROM I can use for my GT-N7000 for best performance... I am looking for S III features, good battery life as well as All apps functioning well with a stable device....

Note1305 said:
Hi... The Kernel that comes along with German XXLRQ as given in the "ibt times" website...
You have any suggestions on what Kernel and ROM I can use for my GT-N7000 for best performance... I am looking for S III features, good battery life as well as All apps functioning well with a stable device....
Click to expand...
Click to collapse
u saidd u bricked ur phone.. is it working now..
the latest update of the note 4.0.4 has similar launcher as of s3..
hydracore and speedmod are safe kernels

Note1305 said:
Hi folks... I am new here and this is my first post.
Recently bought a new Samsung Galaxy Note from the Samsung E Store. I am located in India.
Got the phone with ginger bread 2.3.6
Did update with kies desktop (for windows) to ICS 4.0.3
Got an OTA update for ICS 4.0.4 and did that as well
Saw the XXLRQ update available for the international variant of Galaxy Note and did that as well.
Saw an update available to 4.1.1 using paranoid android but phone got bricked on the process... Any help / Suggestions.....???
Need to know the best ROM as well as Kernel that I can upgrade my Note to.....
Click to expand...
Click to collapse
You are not given useful information which procedure you followed to flash paranoid rom?
Enviado desde mi GT-N7000 usando Tapatalk 2

nokiamodeln91 said:
u saidd u bricked ur phone.. is it working now..
the latest update of the note 4.0.4 has similar launcher as of s3..
hydracore and speedmod are safe kernels
Click to expand...
Click to collapse
Nope.. its still bricked... I'm doing some R&D on it... ODIN is able to recognize it... planning to take it to the service center if it doesn't work. What I'm looking for is the best ROM as well as Kernel based on S III as well as touchwiz after I unbrick my phone. Most of my frenz suggest I NOT install XXLRQ German ROM / Kernel on my phone as it corrupts it after 45 dayz... give me some ideas please...

Note1305 said:
Hi... The Kernel that comes along with German XXLRQ as given in the "ibt times" website...
You have any suggestions on what Kernel and ROM I can use for my GT-N7000 for best performance... I am looking for S III features, good battery life as well as All apps functioning well with a stable device....
Click to expand...
Click to collapse
Im assume your devices still alive....
1). Root your devices with dr.ketan guide.
2.) Download speedmod k13-3 or hydracore 5.3 kernel. And flash it.
3). Download classic rom v6 ( stable and battery friendly)
4). Put v6 on your devices sd card.
5). Boot into recovery mode. And perform full wipe.
6. Install v6 rom. Done.
Good luck mate.
Sent from my GT-N7000 using xda premium

msedek said:
You are not given useful information which procedure you followed to flash paranoid rom?
Enviado desde mi GT-N7000 usando Tapatalk 2
Click to expand...
Click to collapse
The instructions I followed are as below -
"Instructions
Copy the ParanoidAndroid Jelly Bean ROM and the GApps package to your phone’s internal SD card.
Switch your phone off and boot into ClockworkMod Recovery. To do this, press and hold down the Volume Up, Home, and Power buttons together until the phone boots into recovery.
NOTE: You can use the Volume keys to navigate and the Power buttons to select an item or option in recovery.
Make a NANDroid backup of your current ROM in case of problems. To create a backup, go to Backup and Restore and select Backup.
Select Wipe data/factory reset and confirm the action on the next screen. Wait for the process to finish.
Select Wipe cache partition and confirm the action on the next screen.
Go to the main menu and select Advanced. From there, select Wipe Dalvik cache and confirm the action on the next screen.
Select Install ZIP from SD card.
Select Choose ZIP from SD card and navigate to the ParanoidAndroid Jelly Bean ROM ZIP file. Select the file and confirm the action on the next screen to start installing the ROM on your phone.
Once installation of the ROM is done, install the GApps package in the same manner as in steps 7 and 8.
After GApps is installed, select Go back and choose Reboot system now. This will reboot your phone to the newly installed ParanoidAndroid ROM.
NOTE: First boot may take up to 5 minutes.
Great job! Your Samsung Galaxy Note GT-N7000 is now running Android 4.1.1 Jelly Bean thanks to the ParanoidAndroid ROM."
I guess the German ROM / Kernel for XXLRQ are a scam... not sure though...

so i guess u wiped on a stock ICS kernel.
as u still have access to download mode ,,, just try to flash a GB rom and then reboot into recovery and do the wipes and check if the phone starts.
once it does u can think of installing PA JB

lee yun khong said:
Im assume your devices still alive....
1). Root your devices with dr.ketan guide.
2.) Download speedmod k13-3 or hydracore 5.3 kernel. And flash it.
3). Download classic rom v6 ( stable and battery friendly)
4). Put v6 on your devices sd card.
5). Boot into recovery mode. And perform full wipe.
6. Install v6 rom. Done.
Good luck mate.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Does that give the same TouchWiz as well as features as that of Galaxy SIII or are you saying thats the most compatible ROM / Kernel for Galaxy Note... Please advice...

Note1305 said:
The instructions I followed are as below -
"Instructions
Copy the ParanoidAndroid Jelly Bean ROM and the GApps package to your phone’s internal SD card.
Switch your phone off and boot into ClockworkMod Recovery. To do this, press and hold down the Volume Up, Home, and Power buttons together until the phone boots into recovery.
NOTE: You can use the Volume keys to navigate and the Power buttons to select an item or option in recovery.
Make a NANDroid backup of your current ROM in case of problems. To create a backup, go to Backup and Restore and select Backup.
Select Wipe data/factory reset and confirm the action on the next screen. Wait for the process to finish.
Select Wipe cache partition and confirm the action on the next screen.
Go to the main menu and select Advanced. From there, select Wipe Dalvik cache and confirm the action on the next screen.
Select Install ZIP from SD card.
Select Choose ZIP from SD card and navigate to the ParanoidAndroid Jelly Bean ROM ZIP file. Select the file and confirm the action on the next screen to start installing the ROM on your phone.
Once installation of the ROM is done, install the GApps package in the same manner as in steps 7 and 8.
After GApps is installed, select Go back and choose Reboot system now. This will reboot your phone to the newly installed ParanoidAndroid ROM.
NOTE: First boot may take up to 5 minutes.
Great job! Your Samsung Galaxy Note GT-N7000 is now running Android 4.1.1 Jelly Bean thanks to the ParanoidAndroid ROM."
I guess the German ROM / Kernel for XXLRQ are a scam... not sure though...
Click to expand...
Click to collapse
How did you root the phone? And how did you get cwm?
Or you used stock recovery to flash the rom from external sd?
Enviado desde mi GT-N7000 usando Tapatalk 2

Note1305 said:
Does that give the same TouchWiz as well as features as that of Galaxy SIII or are you saying thats the most compatible ROM / Kernel for Galaxy Note... Please advice...
Click to expand...
Click to collapse
V6 was the lastest LR9 ics 4.04 based custom rom. Which S3 launcher from samsung was original come with that rom. It almost include all the available features from s3. But not 100%, such as smart stay you need to download from third parties.
You are looking for s3 launcher look , stable and battery friendly rom right?
V6 classic rom will the best choices.
Sent from my GT-N7000 using xda premium

[Q] My Galaxy Note GT-N7000

Hi everyone i have bought a second hand galaxy note n7000 which has a custom rom already installed on it
Android version
4.0.3
Baseband version
N7000DXLP5
Kernel version
3.0.15-franco.Kernel
[email protected] #3
SMP PREEMPT Fri May 25 20:33:33 WEST 2012
Build number
KingDroid ICS NoteMania Edition v2.0
i am wanting to go back to its original ics stock rom when the phone was first bought, how do i go about doing this, just to note i have
experience with rooting & flashing of roms but i just want to make sure i do it the best & correct way any help would be appreciated

Download the stock rom GB ot ics.
put the phone in download mode
connect to pc.
Open odin and select the rom file in pda
flash it
if u decide to go to gb.. then u can do a factory reset from recovery
if u chose ics, then u will need to install a safe kernel first before a factory wipe.

As it's second hand, once you're on rom of choice with rooted kernel, it may be worth installing the following app to check emmc for any possible damage:
https://play.google.com/store/apps/details?id=net.vinagre.android.emmc_check
Sent from my GT-N7000 using xda premium

nokiamodeln91 said:
Download the stock rom GB ot ics.
put the phone in download mode
connect to pc.
Open odin and select the rom file in pda
flash it
if u decide to go to gb.. then u can do a factory reset from recovery
if u chose ics, then u will need to install a safe kernel first before a factory wipe.[/
will a stock rom work on any firmware
Click to expand...
Click to collapse

my galaxy note
SpyderTracks said:
As it's second hand, once you're on rom of choice with rooted kernel, it may be worth installing the following app to check emmc for any possible damage:
https://play.google.com/store/apps/details?id=net.vinagre.android.emmc_check
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
done that & there is no damage

yes.. use pc odin.

May be worth doing full wipes before flashing while you're on safe kernel.
Sent from my GT-N7000 using xda premium

From 2.3.6 to custom rom

Hey guys!
I need your help in this one i want to run a custom rom on my device
but had some really bad difficulty's and ended up with a bootlooping phone what whas really hard to fix (more luck than knowledge)
Some how i managed to go back to custom and its running on :
Firmware
2.3.6
Baseband
I9000XXJW4
Kernal
2.6.35.7-I9000XXJW4-CL1043937
[email protected]#2
Buildnumber
GINGERBREAD.BOJW6
ClockWorkMod v3.0.0.5
AND IT IS ROOTED
so i know i have to upgrade my CWM but this messed up my phone the first try.
So need some advice and direct links to versions i need to download for my type op phone and kernal.
Thank you.

First decide which type of ROM you want to flash. Since there are many custom ROMs supported for your device. So do some searching and decide.
My advice is to stay with a stable ROM with least or no bugs.
After you have done this you can flash the ROM with either odin or directly by applying update from sd card during recovery.
Sent from my GT-I9003 using xda app-developers app

shashivydyula said:
First decide which type of ROM you want to flash. Since there are many custom ROMs supported for your device. So do some searching and decide.
My advice is to stay with a stable ROM with least or no bugs.
After you have done this you can flash the ROM with either odin or directly by applying update from sd card during recovery.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your fast respond
And yes i know there are many kinds of custom roms! how ever many roms required CWM 5 or 6
And thats where the problems are starting.
I'm interested in CyanogenMod 10.1 or Slimbean

Follow the steps given in the following link for flashing cyanogen 10.1
A detailed procedure is explained here.
http://forum.xda-developers.com/showthread.php?t=2039755
---------- Post added at 04:56 AM ---------- Previous post was at 04:21 AM ----------
You can use super one click or odin to root and update CWM to higher version.

killbunny said:
Hey guys!
I need your help in this one i want to run a custom rom on my device
but had some really bad difficulty's and ended up with a bootlooping phone what whas really hard to fix (more luck than knowledge)
Some how i managed to go back to custom and its running on :
Firmware
2.3.6
Baseband
I9000XXJW4
Kernal
2.6.35.7-I9000XXJW4-CL1043937
[email protected]#2
Buildnumber
GINGERBREAD.BOJW6
ClockWorkMod v3.0.0.5
AND IT IS ROOTED
so i know i have to upgrade my CWM but this messed up my phone the first try.
So need some advice and direct links to versions i need to download for my type op phone and kernal.
Thank you.
Click to expand...
Click to collapse
Step 1. Rooting GT-I9000 2.3.6 [India DD JV7 / JVB]
Then install
EITHER
Installing Jelly Bean 4.1 on Galaxy S GT-I9000
OR
Installing Ice-cream Sandwich 4.0.4 On Samsung Galaxy S GT-i9000
Visit http://forum.xda-developers.com/showthread.php?t=2057161...

[Q] How to uninstall Cyanogenmod 7?

I've been using CM 7 on my Samsung Galaxy Ace GT-S5830 and recently it has started to crash really frequently... So how do I remove it?
I understand that I'll have to download some "ROM" and go into download mode (how?) and then do something..
Please have in mind that my USB is NOT working for some odd reason but I can transfer files to my phone via Airdroid if transferring ROMs(?) is a thing I have to do.
EDIT: My android version CURRENTLY (with CM) is 2.3.7, before it was 2.0.2.

You're in the wrong section. Please post in the right section next time.
Try searching a flashable Stock ROM. If u don't find one, buy a new USB cable.
S5830i
Sent from the evil Broadcom Chip

Android-fany said:
You're in the wrong section. Please post in the right section next time.
Try searching a flashable Stock ROM. If u don't find one, buy a new USB cable.
S5830i
Sent from the evil Broadcom Chip
Click to expand...
Click to collapse
So I guess I'm staying with Cyanogenmod...

You can try a Stock Based Rom or even a CM 7 based ROM which is more stable.
A few good ROMs have been reviewed by me here,
http://forum.xda-developers.com/showthread.php?t=2297780
You can read and download the one u like or further you can visit my blog www.andro-sapien.blogspot.in

AnelReal said:
So I guess I'm staying with Cyanogenmod...
Click to expand...
Click to collapse
1. Flash your current official firmware via Odin
2. Upgrade to Gingerbread flashing a stock rom via Odin
I advice you to be careful flashing GB roms when you are using Froyo, so you should upgrade to GB before flashing a GB custom based rom
Here It's tutorial about how to flash/upgrade the GT-s5830 firmware
http://forum.xda-developers.com/showthread.php?t=1034145

Viper The Ripper said:
1. Flash your current official firmware via Odin
2. Upgrade to Gingerbread flashing a stock rom via Odin
I advice you to be careful flashing GB roms when you are using Froyo, so you should upgrade to GB before flashing a GB custom based rom
Here It's tutorial about how to flash/upgrade the GT-s5830 firmware
http://forum.xda-developers.com/showthread.php?t=1034145
Click to expand...
Click to collapse
His usb isnt workin so he cant use odin..
Just flash a new rom via cwm. Download the rom of your choice on you ace and then reboot to recovery, wipe data ,cache, dalvik cache and then flash the rom
Sent from my GT-S5830 using xda app-developers app

use mobil odin its work on phone you dont need to use a cable http://forum.xda-developers.com/showthread.php?p=35049645

It worked
Hi guys,
Follow the link
http://forum.xda-developers.com/showthread.php?p=35049645
I tried it on Samsung galaxy ace S5830 and I was able to uninstall cyanogenmod and install
S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5
now I have Android 2.3.6
Thanks for help

AnelReal said:
I've been using CM 7 on my Samsung Galaxy Ace GT-S5830 and recently it has started to crash really frequently... So how do I remove it?
I understand that I'll have to download some "ROM" and go into download mode (how?) and then do something..
Please have in mind that my USB is NOT working for some odd reason but I can transfer files to my phone via Airdroid if transferring ROMs(?) is a thing I have to do.
EDIT: My android version CURRENTLY (with CM) is 2.3.7, before it was 2.0.2.
Click to expand...
Click to collapse
There's no such thing as uninstalling a rom, just flash a new one and you're good to go