Related
Hello, I bought of a friend a Samsung galaxy s and he said it needs only unlocking,so i "think" i unlocked it successfully.Was putting a O2 Simcard in and in applications i was having then the o2 SIM Toolkit.
But when i tried to make an phonecall, he tells me "Mobile Network not available",so i went to settings and wireless and network and tried to choose an network operator but he tells me then " Unable to connect to this network at this time.Please try again later."
What can I do?
Did you check the APNs?
Please first check if your IMEI is intact. If it is, flash a different MODEM and see if it works. If it's not, flash a fresh ROM using ODIN and that should hopefully restore your efs.
At first thanks for the reply, but now what is a APN? And how do i know if my IMEI is intact?
Sry,am a newbie
For you IMEI you should check your original SGS Box's sticker. There should be you IMEI number printed on. If you dial *#06# you should be able to read your IMEI. --> Look if it is the same as on your box
for apn settings. Apn is your connection settings, how your phone connects with the providers network. you have to check your mobile network settings if these are correct.
So, the IMEI nr is different then on the sticker,and the apn wasnt ticked,so I ticked the O2 and tried but still no mobile network.
Then i need to flash if I'm right?
I was already looking a bit around here about roms etc. But there are quite a few out there,so when you say to flash a fresh rom,which actually do I need to use?
Thank you
Hi again,
because the imei wasn't the same, I flashed it with a new rom (actually two different ones)
But still after both flashes I still don't got my old imei and still no mobile network available. After the one flash with I9000XXJPU he didn't said anymore no mobile network available,instead he said no data network available.
It would be nice if somebody would have some advice or help.
Thanks
hey! don't panic, i have had the the same problem
just download darky's resurrection edition in the development section and flash it. it should bring you back to froyo 2.2.1 and should also restore your imei properly. after this procedure you are free to flash any rom you want
dasickzz said:
Hi again,
because the imei wasn't the same, I flashed it with a new rom (actually two different ones)
But still after both flashes I still don't got my old imei and still no mobile network available. After the one flash with I9000XXJPU he didn't said anymore no mobile network available,instead he said no data network available.
It would be nice if somebody would have some advice or help.
Thanks
Click to expand...
Click to collapse
Flash back to 2.2.1
Check imei
Continue on..
Also the problem you had when flashed JPU sounds like you didnt have your APNs correct..thats why the "no data network available"
Sent from my GT-I9000 using Tapatalk
For apn settings check your provider website, our phone them and they will help you set it up
Insanity cm 014/glitch
Hey, I'm having exactly the same problem although the imei number for me is correct.... What can I do?? I googled this problem for hours and without any solution found.... Thanks for any help out here!
Sorry I don't mean to spam but I really need help with this! Thanks
hey, check this, seems to be solved
http://forum.gsmhosting.com/vbb/f453/samsung-i9000-after-unlock-no-network-1168675/
automatic search network...n pjt phone on Utomode for selectkon network
Sent from my GT-I9000 using XDA App
No Network
Hi!
I have the same problem.
Network is fine (i switched the SIM-Card into different phones), but my SGS GT I-9000 does not connect / find to any network.
I am running Darky`s ROM 4.0.4 v11.0 Black Edition with 3.0.17-Semaphore_ICS_1.2.5s.
Also, the phone says on screen the name of my network provider (COSMOTE), but no signal.
What now?
A few months ago, i had the non-function problem with my camera after using the firmware update code, on my SG I9000. I resolved that with some help from a friend, by downgrading to Eclair (JM1_JM1_U_JM1.tar) and switching the camera files - the usual method. After reboot, the camera was working fine but appeared the problem with the network - "NO SERVICE".
Till now, I used different versions of android (Eclair, Froyo, Gingerbread) to fix it without any luck.
If you know any other method, i'll owe you one big time.
Thanx!
Note: I have to say that, before having the camera issue, I unlocked my rooted phone using "GALAXY_S UNLOCK" from Android Market.
maybe you can try to flash your phone to the latest firmware such as XXJVU by using odin.
have you rooted your phone again after using different android version? if not, try rooting it, then unlock it with apps from the market, this would fix the "no service" problem.
you could also try flashing it with a different modem.
lim_kobe2005 said:
maybe you can try to flash your phone to the latest firmware such as XXJVU by using odin.
Click to expand...
Click to collapse
Yes, I've tried different versions of firmware...even the latest one, but no luck until now.
Thanx for the answer!
spyder_pirate said:
have you rooted your phone again after using different android version? if not, try rooting it, then unlock it with apps from the market, this would fix the "no service" problem.
you could also try flashing it with a different modem.
Click to expand...
Click to collapse
I tried flashing with different modem but without any good result until now. Today I'll try again with a different modem (something with a file "7zip" transformed in a folder ".tar"...I'm new with this, i know nothing about it so a friend is helping me).
If this doesn't work, I'm trying the rooting method you're telling me about.
Thanx for all!
The JVT modem is pretty god as well. you can flash the tar or zip files by using sgs kernel flasher from market or by odin.
apple23 said:
The JVT modem is pretty god as well. you can flash the tar or zip files by using sgs kernel flasher from market or by odin.
Click to expand...
Click to collapse
Thanx guys!
It seems that I resolved it, using the I9000XXJVU_I9000OXAJVU_OXA modem (Open Europe). At first, when the phone rebooted there was no signal...it appeared that the problem persisted, but now, after the factory reset (*2767*3855# ) everything seems to work just fine.
Still, I don't remember if SGS signal icon shows the 3G indicator in the upper taskbar (like the SGS 2), because mine doesn't! Can anyone confirm if it's wright or not?
Last edit: It seems the 3G doesn't work, as i tried to access the internet an icon pops saying "No network connection / Cannot connect to internet. Please check your connection settings and try again" - "Settings" and "Ok". If I press "Settings", it takes me to the "Wireless and Network" Menu.
SO, ANY CLUE?
Thanx again!
Have you tried flashing a different modem? What carrier are you on and what modem are you currently using?
Had a bit of a browser glitch, there were zero replies a minute ago.
Stealth316 said:
Have you tried flashing a different modem? What carrier are you on and what modem are you currently using?
Had a bit of a browser glitch, there were zero replies a minute ago.
Click to expand...
Click to collapse
I'm using an Orange Romania prepay card...and now the installed version is I9000XXJVU (the latest 2.3.6 - Open Europe).
I have signal but without 3G, i think, cause the internet connection doesn't work...only wi-fi does.
with the 3g problem, i think you need to edit your apn settings.
settings > wireless and network > mobile network settings > access point names
this is network specific and you might want to check it with your provider
spyder_pirate said:
with the 3g problem, i think you need to edit your apn settings.
settings > wireless and network > mobile network settings > access point names
this is network specific and you might want to check it with your provider
Click to expand...
Click to collapse
I'll check the APN settings later today, after work, and if the problem persist I'll take it to Orange Romania.
I'll let you know the result!
Thanx everyone for your help!
sebastian_banica said:
I'll check the APN settings later today, after work, and if the problem persist I'll take it to Orange Romania.
I'll let you know the result!
Thanx everyone for your help!
Click to expand...
Click to collapse
I got home, set on my SGS the same APN settings from the SGS-2 I'm using now with the Orange Romania card, and it seems to work...at least I don't get the "No network connection / Cannot connect to internet" message anymore and the H/3G icon now appears near the signal icon in the upper taskbar.
I stiil have to run some tests to be 100% sure it really works.
I'll be in touch!
I flashed the latest CM9 nightly two days ago, and everything seems to work great other than that I have no mobile signal. I am an Australian Optus user, and I tried it both with the modem that came with CM9 and with the one I believe is for my country, which is XXJQ3 by flashing that.
In both situations, I can scan for networks and see all three carriers just fine, but it shows no signal, just an "x" in the middle of the signal triangle, nor does it show which carrier it is connected to. I cannot make emergency calls because it says no mobile network is available.
Is this a modem baseband/firmware problem ? I am guessing not, because I would think that if it can physically see the networks, then the modem must be working right ? But if so, why can it not connect to anything ? The modem firmware I am using is for ICS and I believe it is the correcto one for my region, and I have enabled everything in the modem settings but still it will not connect to any network. Why ?
pawz said:
I flashed the latest CM9 nightly two days ago, and everything seems to work great other than that I have no mobile signal. I am an Australian Optus user, and I tried it both with the modem that came with CM9 and with the one I believe is for my country, which is XXJQ3 by flashing that.
In both situations, I can scan for networks and see all three carriers just fine, but it shows no signal, just an "x" in the middle of the signal triangle, nor does it show which carrier it is connected to. I cannot make emergency calls because it says no mobile network is available.
Is this a modem baseband/firmware problem ? I am guessing not, because I would think that if it can physically see the networks, then the modem must be working right ? But if so, why can it not connect to anything ? The modem firmware I am using is for ICS and I believe it is the correcto one for my region, and I have enabled everything in the modem settings but still it will not connect to any network. Why ?
Click to expand...
Click to collapse
did you have try replace/update the modem radios from this? http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_(GSM):_Support_Downloads
you can try a different modem, It doesn’t matter if you prefer another modem, you can flash another modem, you can try flash any modem file you want, it's will not brick your tab
If you had, but still not working, then go to dialer, put this code *#*#4636#*#*, pick tablet information, try turn of the radio then turn on again and try to fix permission on cwm too.
good luck.
qm4n76 said:
did you have try replace/update the modem radios from this?
(url redacted)
you can try a different modem, It doesn’t matter if you prefer another modem, you can flash another modem, you can try flash any modem file you want, it's will not brick your tab
If you had, but still not working, then go to dialer, put this code *#*#4636#*#*, pick tablet information, try turn of the radio then turn on again and try to fix permission on cwm too.
good luck.
Click to expand...
Click to collapse
Thanks. Tried all your suggestions. Yes, that is where I obtained my XXJQ3 modem, which I flashed via CWM. I tried your other tip of turning the radio off and on again and then fixing permissions in CWM but to no avail. Still no mobile signal.
Is it correct to assume that if the device can scan for networks and see networks, then the modem is working ? The information screen you directed me to says "emergency calls only", but I cannot actually make an emergency call because it says "mobile network not available", so even though it can "see" three networks, it cannot connect to any of them to either get a signal or make emergency calls.
What does this mean ? Surely it has the right frequencies set otherwise it wouldn't see the networks at all, right ? Is this a CM9 bug in the nightly I flashed or something ? Wondering where to look. I get the feeling the modem is working fine and that something else is wrong.
I use the jlv modem from the vibrant phone.
But jpz modem is also OK for optus.
Why not do Android backup for safe keep, then restock using gb stock safe from overcome guide, and flash jpz modem to try.
If it is the same, then it is hardware related.
Sent from my GT-P1000 using XDA
Oh my god. The reason it didn't work work is so stupid I had to headdesk when I realised. The SIM I was using was old and had been disabled. The reason I didn't think it mattered, is that in Gingerbread, it would still register and show reception bars and I could make emergency calls with the old SIM, or indeed even without a SIM in the device at all. But in ICS, none of that was the case, and it would not register and not let me make emergency calls without a valid SIM.
I guess I was just making a stupid assumption that SIM-less emergency calls that worked in GB would also work in ICS. Stupid me.
Everyone can make mistakes or forget something, but you should thank all the users who give you answers.
Sent from my GT-P1000 using XDA
Got strange problem in my s3 lte.i cant any 3g or 4g service.only 2g is working..
tried hard reset etc but no fix..any idea how to fix it..?
please help
Lack of information posted .
jje
its just shwoing E and not 3g or H or 4g etc ..
i can make phone calls txt etc perfectly just not getting 3g 4g service.
its on 4.1.2 rooted via cf root..
its showing imei number basebacd etc..
dont know what more i have to say about fault..?
silverbox750 said:
its just shwoing E and not 3g or H or 4g etc ..
i can make phone calls txt etc perfectly just not getting 3g 4g service.
its on 4.1.2 rooted via cf root..
its showing imei number basebacd etc..
dont know what more i have to say about fault..?
Click to expand...
Click to collapse
Did you try Settings -> More Settings -> Mobile networks -> Network mode, set it 4G only or auto connect.
Another workaround maybe there's problem with your apn's? For example I had it set to MMS then ahd EDGE available only.
Second warkaround is secret menu, type it in dialer *#0011#.
how to set up MMS then ahd EDGE available only?
and i typed ?*#0011# and its showing
gsm900 available
mcc-mnc ; 234-10
tra ;120 bcch 120 cid 276c
rx pwr 85 dtx
txl 0 rx q 7 txl 0
speech ver amr efr fr
voc adaptive rate
ts 0
therm 130 lna 0
silverbox750 said:
its just shwoing E and not 3g or H or 4g etc ..
i can make phone calls txt etc perfectly just not getting 3g 4g service.
its on 4.1.2 rooted via cf root..
its showing imei number basebacd etc..
dont know what more i have to say about fault..?
Click to expand...
Click to collapse
Missing what firmware modem and CSC
Firmware virsion 4.1.2
build number @ jz054k.i9305xxbll5
csc @ i9305evrbll1
henrylife said:
Did you try Settings -> More Settings -> Mobile networks -> Network mode, set it 4G only or auto connect.
Another workaround maybe there's problem with your apn's? For example I had it set to MMS then ahd EDGE available only.
Second warkaround is secret menu, type it in dialer *#0011#.[/QUOTE
My GT-i9305 LTE doesn't detect GSM network automatically I have only 2g service in my country, my phone does not connect to GSM automatically, i have to set it on GSM only every time i restart my phone it does not stick on GSM only, whenever i restart my phone it will switch to LTE/GSM/WCDMA/ auto mode but doesnt connect to GSM i have tried many ways wouldn't fix it.
It will be great if any one can help me i have tried to install another modem but couldn,t find any, I rooted it tried to install some customs modems but no success i had to flash it with old firmware
phone info
Galaxy s3 i9305 LTE
firmware 4.1.2
baseband i9305xxalk2
build number i9305xxbll5
need you help
Click to expand...
Click to collapse
I have exactly same problem with silver.. Have you fixed it? I have tried to fix problem some, but nothing looks like gonna fix it...
I have tried everything that was written on the forum..
When I check *#0011# it shows that only GSM900 is available...
Anybody?
Have you tried changing it to WCDMA. I was having that problem with the 3g service not going above a few kbs, I changed it from gsm to WCDMA nd its back to full speed 3mbs.
M.IMRAN said:
Have you tried changing it to WCDMA. I was having that problem with the 3g service not going above a few kbs, I changed it from gsm to WCDMA nd its back to full speed 3mbs.
Click to expand...
Click to collapse
Yep, I did. Both on the phone menu and service menu. Doesn't take any 3g or 4g signal if I choose em only.
Wipe phone flash correct stock rom . Check modem check IMEI
JJEgan said:
Wipe phone flash correct stock rom . Check modem check IMEI
Click to expand...
Click to collapse
Done, still same.. I have both tried with Cyanogen, Liquidsmooth, Stock rom, Ripper rom...
Stock rom with correct modem and APN not working then take it to a service centre .
jje
Rethua said:
Done, still same.. I have both tried with Cyanogen, Liquidsmooth, Stock rom, Ripper rom...
Click to expand...
Click to collapse
Where did you buy it?. Did you see if the modem frequency of the carrier it's available in your phone?, I got the same problem and it's possible that my phone doesn't have the hardware ready for the carrier in my country. I still looking for an answer.
fabav said:
Where did you buy it?. Did you see if the modem frequency of the carrier it's available in your phone?, I got the same problem and it's possible that my phone doesn't have the hardware ready for the carrier in my country. I still looking for an answer.
Click to expand...
Click to collapse
This is I9305 specifications are not new .
Check your network before purchase as hardware is not flash able .
http://en.wikipedia.org/wiki/Samsung_Galaxy_S_III#Model_variants
Same problem
This NVM problem new HW and old nvm I got imei repair or unlock.
That's how I went, 20 managed to fix it, but this is not the last one because it is very new.
2-3 week old phone.
Looking for new NVM and efs backup.
Hi
I have a same problem only 2G network ...
i9305 in 4.3
behind the bug i wan't to unlock phone with Z3X box and i downgrade to 4.1.1 and unlock
but after that il lost 3G and 4G network
do you find a solution
thanks a lot
AP I9305XXUEML8
CP I9305XXALI9
CSC I9305OLBEML6
in french network
I reperair box nspro working 100!
Wysłane z mojego GT-I9305 przy użyciu Tapatalka
strpio said:
I reperair box nspro working 100!
Wysłane z mojego GT-I9305 przy użyciu Tapatalka
Click to expand...
Click to collapse
OK thanks i have just Z3X box ....
Hello developers.
I am amz. In dire need of your help.
Ok so i have a new mini
I turned it on n it would jus turn off if I used apps. I got a new battery. That stopped.
I then try use Internet it works only on G and E but if I go to 3g or Lte. .H will never come on. Can't call it says not registered on network only on the higher bands not gsm.. It's a 4G sim it works perfectly in my old s5 mini and signal is excellent here. I got new Internet settings too. G n E works why the he'll doesny the other bands register on network? Imei shows its not blocked either. I'm in the UK on EE. I cannot understand. I have all the OTA updates. Can u tell me if I can fix it by doing something thro service menus or anything also all sims do the same in this phone. I don't have a pc to change the rom. Could I do it through a external SD card.
Please I beg of you help.
Run the system updates, I had network issues until it was fully updated.
They are only patches, no new rom.
Reboot once each batch has completed until there are no more.
If that does not work, potentially you have a row version which uses a different band than us in the uk. Send it back.
I have the June 2015 update. I ran all updates. Still not working? I wanna install the cm12 rom m see if that'll fix it but kingroot not working. How do I see what band my phone is tryna connect in wcdma mode n what is required by the network? 4g don't work either?
I just Checked. My networked EE uses wcdma on 2100mhz. My phone is trying to connect. But it just says emerge calls only. Wth. What's wrong with it??
Can you post a screen of the About phone?
Should look identical to mine
Also, have you tried googling ee 4g settings s5 mini?
My network required me to get a 4g sim upgrade, before that it needed settings for hspda 3g which worked
I have a similar problem. Phone worked fine for couple of months, but since tuesday, it only works when I force it to GSM only.
G800FXXU1AOG2, nordic
(the thumbnail above equals to mine)
Maybe the network providers have changed 3g/4g details.
Check the website for correct details and update them in phone, if that doesn't work try a friends sim, if that doesn't work return phone
I had the problem aswell. I searched for the newest firmware in the internet (in my case I used the russian one). Then I extracted the modem file and made a tar file of it to flash it through odin. After I've done it everything worked fine.
If you want me to, I can do this tomorrow or saturday for u.
I flashed the original firmware (July 10, Nee), that did not help. What is the date of your firmware that works now?
I thinky june 2015.. I had the problem in February last year
It's me amz
Ok so basically I found out I need to flash my modem file or change the rom. But I have no PC to flash
.so I need a app which can root my phone or something without a computer. Kingroot didn't work. Anyone got any ideas on how I can do this? I've Google relentlessly. I need a developers help lol
I'll even pay them
Flacid Monkey said:
Maybe the network providers have changed 3g/4g details.
Check the website for correct details and update them in phone, if that doesn't work try a friends sim, if that doesn't work return phone
Click to expand...
Click to collapse
I returned my phone and they changed the "circuit board". So mine was a hardware problem.
I've rooted my phone and going to change my rom however the tar.md5 file I can't use as I can.tell use odin. I need the .img file to have the twrp bootloader. anyone know where I can download this?