Got strange problem in my s3 lte.i cant any 3g or 4g service.only 2g is working..
tried hard reset etc but no fix..any idea how to fix it..?
please help
Lack of information posted .
jje
its just shwoing E and not 3g or H or 4g etc ..
i can make phone calls txt etc perfectly just not getting 3g 4g service.
its on 4.1.2 rooted via cf root..
its showing imei number basebacd etc..
dont know what more i have to say about fault..?
silverbox750 said:
its just shwoing E and not 3g or H or 4g etc ..
i can make phone calls txt etc perfectly just not getting 3g 4g service.
its on 4.1.2 rooted via cf root..
its showing imei number basebacd etc..
dont know what more i have to say about fault..?
Click to expand...
Click to collapse
Did you try Settings -> More Settings -> Mobile networks -> Network mode, set it 4G only or auto connect.
Another workaround maybe there's problem with your apn's? For example I had it set to MMS then ahd EDGE available only.
Second warkaround is secret menu, type it in dialer *#0011#.
how to set up MMS then ahd EDGE available only?
and i typed ?*#0011# and its showing
gsm900 available
mcc-mnc ; 234-10
tra ;120 bcch 120 cid 276c
rx pwr 85 dtx
txl 0 rx q 7 txl 0
speech ver amr efr fr
voc adaptive rate
ts 0
therm 130 lna 0
silverbox750 said:
its just shwoing E and not 3g or H or 4g etc ..
i can make phone calls txt etc perfectly just not getting 3g 4g service.
its on 4.1.2 rooted via cf root..
its showing imei number basebacd etc..
dont know what more i have to say about fault..?
Click to expand...
Click to collapse
Missing what firmware modem and CSC
Firmware virsion 4.1.2
build number @ jz054k.i9305xxbll5
csc @ i9305evrbll1
henrylife said:
Did you try Settings -> More Settings -> Mobile networks -> Network mode, set it 4G only or auto connect.
Another workaround maybe there's problem with your apn's? For example I had it set to MMS then ahd EDGE available only.
Second warkaround is secret menu, type it in dialer *#0011#.[/QUOTE
My GT-i9305 LTE doesn't detect GSM network automatically I have only 2g service in my country, my phone does not connect to GSM automatically, i have to set it on GSM only every time i restart my phone it does not stick on GSM only, whenever i restart my phone it will switch to LTE/GSM/WCDMA/ auto mode but doesnt connect to GSM i have tried many ways wouldn't fix it.
It will be great if any one can help me i have tried to install another modem but couldn,t find any, I rooted it tried to install some customs modems but no success i had to flash it with old firmware
phone info
Galaxy s3 i9305 LTE
firmware 4.1.2
baseband i9305xxalk2
build number i9305xxbll5
need you help
Click to expand...
Click to collapse
I have exactly same problem with silver.. Have you fixed it? I have tried to fix problem some, but nothing looks like gonna fix it...
I have tried everything that was written on the forum..
When I check *#0011# it shows that only GSM900 is available...
Anybody?
Have you tried changing it to WCDMA. I was having that problem with the 3g service not going above a few kbs, I changed it from gsm to WCDMA nd its back to full speed 3mbs.
M.IMRAN said:
Have you tried changing it to WCDMA. I was having that problem with the 3g service not going above a few kbs, I changed it from gsm to WCDMA nd its back to full speed 3mbs.
Click to expand...
Click to collapse
Yep, I did. Both on the phone menu and service menu. Doesn't take any 3g or 4g signal if I choose em only.
Wipe phone flash correct stock rom . Check modem check IMEI
JJEgan said:
Wipe phone flash correct stock rom . Check modem check IMEI
Click to expand...
Click to collapse
Done, still same.. I have both tried with Cyanogen, Liquidsmooth, Stock rom, Ripper rom...
Stock rom with correct modem and APN not working then take it to a service centre .
jje
Rethua said:
Done, still same.. I have both tried with Cyanogen, Liquidsmooth, Stock rom, Ripper rom...
Click to expand...
Click to collapse
Where did you buy it?. Did you see if the modem frequency of the carrier it's available in your phone?, I got the same problem and it's possible that my phone doesn't have the hardware ready for the carrier in my country. I still looking for an answer.
fabav said:
Where did you buy it?. Did you see if the modem frequency of the carrier it's available in your phone?, I got the same problem and it's possible that my phone doesn't have the hardware ready for the carrier in my country. I still looking for an answer.
Click to expand...
Click to collapse
This is I9305 specifications are not new .
Check your network before purchase as hardware is not flash able .
http://en.wikipedia.org/wiki/Samsung_Galaxy_S_III#Model_variants
Same problem
This NVM problem new HW and old nvm I got imei repair or unlock.
That's how I went, 20 managed to fix it, but this is not the last one because it is very new.
2-3 week old phone.
Looking for new NVM and efs backup.
Hi
I have a same problem only 2G network ...
i9305 in 4.3
behind the bug i wan't to unlock phone with Z3X box and i downgrade to 4.1.1 and unlock
but after that il lost 3G and 4G network
do you find a solution
thanks a lot
AP I9305XXUEML8
CP I9305XXALI9
CSC I9305OLBEML6
in french network
I reperair box nspro working 100!
Wysłane z mojego GT-I9305 przy użyciu Tapatalka
strpio said:
I reperair box nspro working 100!
Wysłane z mojego GT-I9305 przy użyciu Tapatalka
Click to expand...
Click to collapse
OK thanks i have just Z3X box ....
Related
Can someone help me.. i was resetting my wife's i9000 Galaxy S as it was running slow. And since its booted up i doesn't pick up the network anymore.. and when trying to call out it says "data network not availible".... driving me insane!
It shows the Tmobile logo on startup, but it has always been used with o2 or Tesco (so i assumed its unlocked) I have done the factory reset and even previously updated it using kies. Now Kies wont update either! bit stuck at the mo..
jonnyfartpant5 said:
Can someone help me.. i was resetting my wife's i9000 Galaxy S as it was running slow. And since its booted up i doesn't pick up the network anymore.. and when trying to call out it says "data network not availible".... driving me insane!
It shows the Tmobile logo on startup, but it has always been used with o2 or Tesco (so i assumed its unlocked) I have done the factory reset and even previously updated it using kies. Now Kies wont update either! bit stuck at the mo..
Click to expand...
Click to collapse
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
try menu>setting>wireless and Networks> Mobile networks, to select your network
jonnyfartpant5 said:
Can someone help me.. i was resetting my wife's i9000 Galaxy S as it was running slow. And since its booted up i doesn't pick up the network anymore.. and when trying to call out it says "data network not availible".... driving me insane!
It shows the Tmobile logo on startup, but it has always been used with o2 or Tesco (so i assumed its unlocked) I have done the factory reset and even previously updated it using kies. Now Kies wont update either! bit stuck at the mo..
Click to expand...
Click to collapse
Ok, since posting i have managed to Update the fiirmware to 2.3.3 gingerbread using odin. But am still unable to use it on o2/Tesco mobile or even on Tmobile now! Emergency calls only, and gives the error (mobile network not available). I might be wrong, but i suspect something like the firmware for the modem or something?..
jonnyfartpant5 said:
Ok, since posting i have managed to Update the fiirmware to 2.3.3 gingerbread using odin. But am still unable to use it on o2/Tesco mobile or even on Tmobile now! Emergency calls only, and gives the error (mobile network not available). I might be wrong, but i suspect something like the firmware for the modem or something?..
Click to expand...
Click to collapse
try setting the APN manually or changing modem
slipknot31 said:
try setting the APN manually or changing modem
Click to expand...
Click to collapse
i done the APN and no change.. i tried to flash the modem.. pretty sure it changed.. but how am i to know exactly what modem to be using? im from uk and i need it on o2/tesco mobile and its running 2.3.5 gingerbread at mo.. cheers
in Phone app dial *#06# and see if your imei is intact .. if it's gone then you have to flash a GB rom, root it again and return to CM10 . Use this guide if your imei is gone : [Guide]Upgrade SGS I9000 to 2.3.6 (Value Pack) & Root It
idCyber said:
in Phone app dial *#06# and see if your imei is intact .. if it's gone then you have to flash a GB rom, root it again and return to CM10 . Use this guide if your imei is gone : [Guide]Upgrade SGS I9000 to 2.3.6 (Value Pack) & Root It
Click to expand...
Click to collapse
hi i tried this tutorial, everything went smoothly, but still getting the same error. anything else i can try?
jonnyfartpant5 said:
hi i tried this tutorial, everything went smoothly, but still getting the same error. anything else i can try?
Click to expand...
Click to collapse
you can try manually set gsm band to 900mhz
McDown said:
you can try manually set gsm band to 900mhz
Click to expand...
Click to collapse
in network mode? to "gsm only" if so ... it didnt work
jonnyfartpant5 said:
in network mode? to "gsm only" if so ... it didnt work
Click to expand...
Click to collapse
no. in service mode.
dial *#2263# and choose gsm 900
McDown said:
no. in service mode.
dial *#2263# and choose gsm 900
Click to expand...
Click to collapse
still no luck
dial *#0011# to see if gsm 900 is active
McDown said:
dial *#0011# to see if gsm 900 is active
Click to expand...
Click to collapse
Ok I think I've worked out where the problem lies. Think it is a bad efs/imei as its displaying wrong after entering *#06# etc.. "004999010630000" grrr. So now need to work out how to get this back
Hi
One of my friends phone ( Galaxy S Plus ) having a very weak access to GSM network and at his home, it doesn't see any GSM network where as his iphone works fine.
Any solution to fix this issue. Is there any way to update the modem file , the device is still on stock 2.3.3. Will upgrading it to latest firmware 2.3.6 from sammobile.com will fix the issue.
Thank for the help.
First try to update via KIES.
If that doesnt work correctly see the link underneath my sig.
About the issue it may work but im not certain
srbutt said:
Hi
One of my friends phone ( Galaxy S Plus ) having a very weak access to GSM network and at his home, it doesn't see any GSM network where as his iphone works fine.
Any solution to fix this issue. Is there any way to update the modem file , the device is still on stock 2.3.3. Will upgrading it to latest firmware 2.3.6 from sammobile.com will fix the issue.
Thank for the help.
Click to expand...
Click to collapse
Hai =)
You should first check your APN, thats where your mobile data en GSM network is connected with. You can find your APN data mostly at your providers site.
Cheers
killerzone26 said:
Hai =)
You should first check your APN, thats where your mobile data en GSM network is connected with. You can find your APN data mostly at your providers site.
Cheers
Click to expand...
Click to collapse
Its not about connecting to the GSM for data service, i am talking about just the network for normal calls and SMS, the device is not connecting to the provider network.
Secondly where can I get the modem files for this device and what is the process to update the modem file only. Does the firmware files downloaded from sammobile has the modem files built-in too ?
Hello, and thanks for taking the time and reading this.
I installed CM on my C6603, but reflashed to a stock .244 rom, which I already used to update to .244 before. Since then, LTE, which was working fine on the same ROM before, is not working anymore. LTE (prefered)/WCDMA/GSM is activated in settings, but *#*#4636#*#* --> Phone Informations shows the following:
(Interesting facts: the timestamp translates to about 300 years, and all the values, including the last one, ta= are all the same)
Code:
[B]Network-Information[/B]
[0]=CellInfoLte: mRegistered=NO
mTimeStampType=Unknown
mTimeStamp=922337203..........ns,
:[email protected] mMcc=2147483647
mMnc=2147483647
mCi=2147483647
mPci=2147483647
mTac=2147483647,
CellSignalStrenghtLte: ss=2147483647
rsrp=2147483647
rsrq=2147483647
rssnr=2147483647
cqi=2147483647
ta=2147483647
In the same menu, the preferred network is set to "WCDMA preferred". If I set it to anything that has LTE in it, I still only get a HSPAP connection, and frequent network drops, except for "LTE/CDMA auto (PRL)" which show no network and throws up an error, but not every time.
When I search for networks manually, it shows my carrier's LTE network, but I can not log in to it.
I have no clue how to fix this, so do not hesitate to suggest a sloution.
Do you have a backup for TA partion before unlocking the bootloader?
If yes,restore your TA and flash the firmware again.
gm007 said:
Do you have a backup for TA partion before unlocking the bootloader?
If yes,restore your TA and flash the firmware again.
Click to expand...
Click to collapse
Thanks for the suggestion. I have relocked the Bl with flashtool, that should have the same effect, shouldn't it? It did not help, however...
No relocking the bootloader with flashtool is different than restoring TA partition.
gm007 said:
No relocking the bootloader with flashtool is different than restoring TA partition.
Click to expand...
Click to collapse
oh, ok. I shall try to do that, then.
OK, I restored my TA-partition, that didn't help though. Any more suggestions? I am still particularly sceptical of all the numbers after mTimeStamp that are identical.
Have you tried flashing the baseband only for the c6606 onto the c6603 I had the same problem my Gwat was rolling from 3g to h+ then off no radio (red x) , that was after the last update so I refreshed the baseband for the zl c6606 and it we working but taking about 5 min to connect then I tried the *#*#4636#*#* lte preferwd setting as suggested now its instant connect and no disconnects,the baseband flashing was to correct the lte connecting in Canada. It might help you.I also have the timestamp thing I think
Coirpre said:
Hello, and thanks for taking the time and reading this.
I installed CM on my C6603, but reflashed to a stock .244 rom, which I already used to update to .244 before. Since then, LTE, which was working fine on the same ROM before, is not working anymore. LTE (prefered)/WCDMA/GSM is activated in settings, but *#*#4636#*#* --> Phone Informations shows the following:
(Interesting facts: the timestamp translates to about 300 years, and all the values, including the last one, ta= are all the same)
Code:
[B]Network-Information[/B]
[0]=CellInfoLte: mRegistered=NO
mTimeStampType=Unknown
mTimeStamp=922337203..........ns,
:[email protected] mMcc=2147483647
mMnc=2147483647
mCi=2147483647
mPci=2147483647
mTac=2147483647,
CellSignalStrenghtLte: ss=2147483647
rsrp=2147483647
rsrq=2147483647
rssnr=2147483647
cqi=2147483647
ta=2147483647
In the same menu, the preferred network is set to "WCDMA preferred". If I set it to anything that has LTE in it, I still only get a HSPAP connection, and frequent network drops, except for "LTE/CDMA auto (PRL)" which show no network and throws up an error, but not every time.
When I search for networks manually, it shows my carrier's LTE network, but I can not log in to it.
I have no clue how to fix this, so do not hesitate to suggest a sloution.
Click to expand...
Click to collapse
tokermobilez said:
Have you tried flashing the baseband only for the c6606 onto the c6603 I had the same problem my Gwat was rolling from 3g to h+ then off no radio (red x) , that was after the last update so I refreshed the baseband for the zl c6606 and it we working but taking about 5 min to connect then I tried the *#*#4636#*#* lte preferwd setting as suggested now its instant connect and no disconnects,the baseband flashing was to correct the lte connecting in Canada. It might help you.I also have the timestamp thing I think
Click to expand...
Click to collapse
yes, mine does that too, jumping from 3g to H+ to no signal all the time, I'll try that as soon as I can. also, it is reassuring to see that you have the same values for all those things.
Flashing a modem from a c6606 ROM did result in crashes and forced restarts, so this was not the solution. For the record, in addition to the frequent switching between 3G, H+ and no signal, I also get lots of dropped calls...
EDIT: with a service test under *#*#service#*#*/Radio Antenna and network mode=LTE, I get a *failed to det rx divesity settings" eror message.
so so sorry
Coirpre said:
Flashing a modem from a c6606 ROM did result in crashes and forced restarts, so this was not the solution. For the record, in addition to the frequent switching between 3G, H+ and no signal, I also get lots of dropped calls...
EDIT: with a service test under *#*#service#*#*/Radio Antenna and network mode=LTE, I get a *failed to det rx divesity settings" eror message.
Click to expand...
Click to collapse
im really sorry but i realised a huge typo it was the c6506 not c6606 i dont under stand what you mean by flashing modem, i presume you mean the same thing as baseband,http://forum.xda-developers.com/showthread.php?t=2287847, follow this page
hi
[the dropped calls is to.do with the cycle between 3g h+ and then radio off all together, the only way I've been able to fix it is the New post I linked to in my latest comment, once again sorry for giving you the wrong model number the first time
QUOTE=Coirpre;47084832]Flashing a modem from a c6606 ROM did result in crashes and forced restarts, so this was not the solution. For the record, in addition to the frequent switching between 3G, H+ and no signal, I also get lots of dropped calls...
EDIT: with a service test under *#*#service#*#*/Radio Antenna and network mode=LTE, I get a *failed to det rx divesity settings" eror message.[/QUOTE]
Hi all
my phone is xperia zr (C5502) unlocked bootloader , currently using stock 5.0.2 rom .
Problem is when i choice WCDMA only i lose signal (emergency call only) i try search manually and i fined 3g network but i cant registering to 3g network. i tried many stock rom but problem not solve , i think the problem started when i flashed C5503 rom on my phone.
any one has idea how can i fixed it? please help me , thancks.
sorry for my bad english
poweroff & remove -replace the card battery giving a few minutes between the replacement
Sent from my VGN-NS10J_S using Tapatalk
Xperia zr said:
Hi all
my phone is xperia zr (C5502) unlocked bootloader , currently using stock 5.0.2 rom .
Problem is when i choice WCDMA only i lose signal (emergency call only) i try search manually and i fined 3g network but i cant registering to 3g network. i tried many stock rom but problem not solve , i think the problem started when i flashed C5503 rom on my phone.
any one has idea how can i fixed it? please help me , thancks.
sorry for my bad english
Click to expand...
Click to collapse
were you able to connect to 3g/wcdma network before? on 4.4.4 kitkat version?
sourabhp said:
were you able to connect to 3g/wcdma network before? on 4.4.4 kitkat version?
Click to expand...
Click to collapse
I don't know exactly , i Remember one time on 4.3 and probably on cyanogen 11.
ecksdeeay said:
poweroff & remove -replace the card battery giving a few minutes between the replacement
Sent from my VGN-NS10J_S using Tapatalk
Click to expand...
Click to collapse
I removed Sim card for five min but steal cant register
Try another sim card or set the provider manually, you'll have to search for the settings....
Sent from my SGP321 using Tapatalk
ecksdeeay said:
Try another sim card or set the provider manually, you'll have to search for the settings....
Sent from my SGP321 using Tapatalk
Click to expand...
Click to collapse
Tried several sim card, as I told before when provide manually, find the 3g but can't register!
Check your cell phone is not registered stolen
Sent from my SGP321 using Tapatalk
ecksdeeay said:
Check your cell phone is not registered stolen
Sent from my SGP321 using Tapatalk
Click to expand...
Click to collapse
I only can't registere on 3g network, using 2g network without problem!
Then check the mast your getting the signal from (no idea where you are? ) but here I use this to check & complain about signal reception / also provides info about maintenance work on masts http://www.sitefinder.ofcom.org.uk/search
ecksdeeay said:
Then check the mast your getting the signal from (no idea where you are? ) but here I use this to check & complain about signal reception / also provides info about maintenance work on masts http://www.sitefinder.ofcom.org.uk/search
Click to expand...
Click to collapse
I'm from Iran dear, my provider is Irancell, I pot my sim to my brothers phone, no problem to register on 3g network.
Relock the phone bootloader !!! Why need it unlocked?
Sent from my SGP321 using Tapatalk
ecksdeeay said:
Relock the phone bootloader !!! Why need it unlocked?
Sent from my SGP321 using Tapatalk
Click to expand...
Click to collapse
You mean the reason is unlocking bootloader? But I didn't see another report for registering to network on unlocked bootloader!
Xperia zr said:
You mean the reason is unlocking bootloader? But I didn't see another report for registering to network on unlocked bootloader!
Click to expand...
Click to collapse
Makes no sense? Not saying it is the reason, it just may kick something into working again?
Sent from my VGN-NS10J_S using Tapatalk
ecksdeeay said:
Makes no sense? Not saying it is the reason, it just may kick something into working again?
Sent from my VGN-NS10J_S using Tapatalk
Click to expand...
Click to collapse
I like try custom rom , custom kernel, that's because I perffer unlocked bootloader.
If I don't find the way to fix this issue, I'll Relock, anyway thanks alot dear.
there seems some problem with radio.
dial *#*#73378426#*#*
Go to service tests > Antenna RX diversity > network mode WCDMA > set Both RX antennas
if that does not work then try relocking bootloader if you have the DRM Keys and TA partition backup
sourabhp said:
there seems some problem with radio.
dial *#*#73378426#*#*
Go to service tests > Antenna RX diversity > network mode WCDMA > set Both RX antennas
if that does not work then try relocking bootloader if you have the DRM Keys and TA partition backup
Click to expand...
Click to collapse
I tested, result: error failed to set RX Diversity settings, please check the current network mode.
I changed network to only GSM, only WCDMA,WCDMA (Perfere), GSM,but results was same!
Xperia zr said:
I tested, result: error failed to set RX Diversity settings, please check the current network mode.
I changed network to only GSM, only WCDMA,WCDMA (Perfere), GSM,but results was same!
Click to expand...
Click to collapse
Looks like its got to be hardware issue. I suggest take backup of everything, relock bootloader if it is unlocked and visit service center
sourabhp said:
there seems some problem with radio.
dial *#*#73378426#*#*
Go to service tests > Antenna RX diversity > network mode WCDMA > set Both RX antennas
if that does not work then try relocking bootloader if you have the DRM Keys and TA partition backup
Click to expand...
Click to collapse
I restore my TA partition, flash LP .454 go to service tests > Antenna RX diversity > network mode WCDMA and set Both RX - result : Set RX Diversity successfully!
Now i can register on WCDMA , H appear next to Antenna , but i cant make call or use internet !!!!
Please help me
Xperia zr said:
I restore my TA partition, flash LP .454 go to service tests > Antenna RX diversity > network mode WCDMA and set Both RX - result : Set RX Diversity successfully!
Now i can register on WCDMA , H appear next to Antenna , but i cant make call or use internet !!!!
Please help me
Click to expand...
Click to collapse
its really strange problem. go to service tests > security > see all 9 keys are there with Key OK Active written
And as u have restored TA partition and DRM keys, you can use Sony PC companion software to repair your phone
OR
use flashtool to flash the ftf file for your specific region
Hi,
can You help me pls with ny LTE i9305 S3? I have problem with signal (antena OK, any sim any network), is just good outside but whan I go somwhere in house, is very bad or stop working network. I am not sure if can be some chip on motherboard problem, or if I solve this problem by some flash.
Thanks
Does it happen when you go inside in any place or just in your house? If it's just in your house then clearly it is just a problem of coverage on your area. I9305 international version supports bands 800, 1800 & 2600 for LTE where both 1800 and 2600 have bad coverage inside buildings. Check as another test if selecting 2g (pure GSM 900) you still have bad coverage. Can you try with a SIM of another carrier? This could also be the definitive test.
If it is a common problem (anywhere, any carrier...), then maybe you can solve it by flashing with Odin a different modem baseband (also called radio).
You have some basebands for download here:
http://sourceforge.net/projects/djb-tgp/files/CWM_Flashables/Modems/4.3 Modems/
I'm using the XXUENA2 with very good results, been used before others also with no major problems (XXUEMK1 and XXUFNI3 for example).
This is my "About device" screenshot where you can see the Baseband I'm using. Works fine in Europe as well as in Brasil:
https://mega.nz/#!Mh1RkbAY!k7l1vTQlxlas5S6OopO9054X-5P7yBpkJrXL_bv5-Fw
-jc
juliancarney said:
Does it happen when you go inside in any place or just in your house? If it's just in your house then clearly it is just a problem of coverage on your area. I9305 international version supports bands 800, 1800 & 2600 for LTE where both 1800 and 2600 have bad coverage inside buildings. Check as another test if selecting 2g (pure GSM 900) you still have bad coverage. Can you try with a SIM of another carrier? This could also be the definitive test.
If it is a common problem (anywhere, any carrier...), then maybe you can solve it by flashing with Odin a different modem baseband (also called radio).
You have some basebands for download here:
http://sourceforge.net/projects/djb-tgp/files/CWM_Flashables/Modems/4.3 Modems/
I'm using the XXUENA2 with very good results, been used before others also with no major problems (XXUEMK1 and XXUFNI3 for example).
This is my "About device" screenshot where you can see the Baseband I'm using. Works fine in Europe as well as in Brasil:
https://mega.nz/#!Mh1RkbAY!k7l1vTQlxlas5S6OopO9054X-5P7yBpkJrXL_bv5-Fw
-jc
Click to expand...
Click to collapse
Hi, thanks for Your reply
my problem is in house, but anyway problem with signal is without any sim always.
So I have now 4.4.4 and pls can You show me where I can download good one modem for this Android for my LTE? I´ll try it
thanks so much
EDIT: I have one. Is South Africa 4.3, there is XXUENA2 Modem, so I´ll try it and let You know.
EDIT2: So I have problem, I can´t downgrade 4.4.4 to 4.3 because will EFS faulty, so You have some idea how I can choose repair my modem for signal repair?
Hey Paul...
1) About signal: how do you expect to get signal without SIM? Or maybe are you meaning signal for just the 112 emergency call?
2) Modem/baseband: I already provided the link in my original post, check it.
3) No need to downgrade. You will only flash the modem/baseband without touching any partition, neither the ROM nor the EFS. You can do that via Odin (check any Odin How-To document -search Google-) or via the recovery if you have TFRT or QWM (at recovery menu select flash zip file and choose the one for the modem -you need to copy the zip file previously to your sd card or internal memory).
Paul Koty said:
Hi, thanks for Your reply
my problem is in house, but anyway problem with signal is without any sim always.
So I have now 4.4.4 and pls can You show me where I can download good one modem for this Android for my LTE? I´ll try it
thanks so much
EDIT: I have one. Is South Africa 4.3, there is XXUENA2 Modem, so I´ll try it and let You know.
EDIT2: So I have problem, I can´t downgrade 4.4.4 to 4.3 because will EFS faulty, so You have some idea how I can choose repair my modem for signal repair?
Click to expand...
Click to collapse
Signal problem
Hello.Sir I have a s3 i9305 when i am on LTE auto network mode then i was unable to make any phone call it always show wrong mmi code or connection problem and then it lost signals after that i rebot it then it pick the network can you tell me how to fix