hi all,
I've a bit of a problem.
have been on cm10 for a while and am trying to flash zeus 7 but get the following error when it reboots
The application com.android.LGSetupWizard (process com.android.LGSetupWizard) has stopped unexpectedly. Please try again
I've tried flashing it a few times but keep getting the same error and the phone won't move off the error screen.
The last time i tried to flash it I;
reset the phone to stock GB via LGmobile support Tool
flashed a rooted V20s rom and installed superuser.zip
flashed zeus 7 and 7.06
but i still get the error
any ideas?
It should be resolved by wiping data... anyway, it's no big deal for lgsetupwizard only seems to be the config question ui for first launch... I always remove it... are there any bugs coming from this FC? If it keeps fcing quick enought to make the phone unusable, try removing it with adb or from the zip itself...
Sent from my LG-P970 using xda premium
i don't think your download was done appropriately
redownload the zip and reflash, i think you should be fine
thanks for the advice.
i solved it by flashing a rooted froyo rom then reflashing zeus7
Related
Until today, my Motorola Droid ran fine. It had ICS Alpha Rom installed. Today, I tried to flash Sourcery Rom and my Droid got stock in the sourcery Rom boot loop. I then flashed over Bugless Beast Rom. I was able to boot into the phone, but since this, every few seconds I receive the message: "The Process android.process.acore has stopped unexpectedly. Please try again." I researched this and, thinking it was the rom causing the problem, flashed to MIUI Rom. This didn't fix the problem, as the same message appeared on the top of the screen. I then tried a factory reset, but when my phone booted back up the force close message appeared again. What should I do now?
Do you use any app2ext solution or similar? cache2sd?
Also did you wipe the caches?
Eiertschik said:
Do you use any app2ext solution or similar? cache2sd?
Also did you wipe the caches?
Click to expand...
Click to collapse
I tried to wipe the dalvik cache and everything is running smoothly now. Thanks
Please help me, I used Odin to go back to GB using a stock rom. Odin gave it a pass and the phone rebooted. But it just stops on the language select and gives me errors such as ' the application android.process.acore has stopped unexpectedly. Please try again. Among with 3 other errors. It then re-boots and does it again.
Can someone please help me out of this mess??
The Same thing happened to me. I went to recovery did a full wipe and flashed using odin again problem solved..
When you say did a full wipe, you mean, wiped data/factory reset?
Jonnyn93 said:
Please help me, I used Odin to go back to GB using a stock rom. Odin gave it a pass and the phone rebooted. But it just stops on the language select and gives me errors such as ' the application android.process.acore has stopped unexpectedly. Please try again. Among with 3 other errors. It then re-boots and does it again.
Can someone please help me out of this mess??
Click to expand...
Click to collapse
go in cwm and make full wipe. there are 4 wipes on menu. make them all
nocus said:
go in cwm and make full wipe. there are 4 wipes on menu. make them all
Click to expand...
Click to collapse
It's okay I've done it now, finally got GB back and rooted again :good:
Isn't it that when you go from ICS to GB you have to make the full wipe?
Device
PT1000N 2.3.3 (Kies upgrade) then rooted using ODIN (several months ago, do not remember which process)
Starting problem
I was using go launcher and frozen samsung home apps using root uninstaller pro. Then installed a driver companion, tablet hung. After reset:
"Sorry The application Samsung Home (process com.sec.android.app.twlauncher) has stopped unexpectedly. Please try again."
What I did
tried to flash back to 2.3.3 using heimdall, no fail messages (first)
hard reset
What I get now
It takes 1 hours aprox (no kidding) then displays error messages for loading swipe, system and other apps. Runs VERY slow and hangs at some point.
Once showed message "UUIDs inconsistent" or something alike ...
Also notice that all installed apps and eve my google credentials are still on the system. Such info should be erased by hard reset (I suppose).
Tried other rooms, tried flashing with ODIN
Big Question:
What can be done ?
TIA
What happened when you try odin? what error msg did you get?
Did you do a full wipe(factory reset, data cache, and dalvik) in recovery after flash?
Side note: for future reference, you should try freeze command in gemini app manager first before uninstalling any systemapps.
You should have done a nandroid backup from CWM before tweaking any sytem apps or data. You would have been able to restore from cwm.
EDIT: May we know whicb ROM and kernel you flashed?
yappoe said:
What happened when you try odin? what error msg did you get?
Did you do a full wipe(factory reset, data cache, and dalvik) in recovery after flash?
EDIT: May we know whicb ROM and kernel you flashed?
Click to expand...
Click to collapse
No errors with odin nor in heidmall when flashing.
Flashing Stock Ginger 2.3.3
Thanks for the tip, should have been more careful when dealing with system sutff
valter.espindola said:
No errors with odin nor in heidmall when flashing.
Flashing Stock Ginger 2.3.3
Thanks for the tip, should have been more careful when dealing with system sutff
Click to expand...
Click to collapse
There are plenty of GB 2.3.3 and most of them are for P1000.
Are you sure yours is for P1000N?
GB 2.3.3 for P1000N should read: P1000NUBJP7
how about yours?
Please check it at Settings > About Device
Download your firmware from http://www.sammobile.com/firmware/ you will have a choice of 2.3.5 or 2.3.6 even.
But word of warning.. it's not easy to root 2.3.5 or 2.3.6.
hi guys..I'm new here..have this problem with my tablet..it always shows camera failed everytime I open it..i've tried almost anything to revive it..
here's what happened..
1. I've upgraded to custom ROM using cm nigtly release..(forgot what version)..then camera failed..
2. Restock it with the orig ROM 2.3.3 gingerbread using ODIN..still camera failed
3. upgraded to CM 9.1 hoping it would fix everything coz I've read it here that it is by far the most stable CM ..but still amera failed
4. Froze the camera using TB>rebooted> defroze camera using TB>tried camera>camera failed
5. tried replacing the stock e-mail.apk with the one I downloaded here in this forum..unfortunately, everytime I try renaming the e-mail apk for it to be replace with the apk I downloaded here, it just stays as it is- I used droid tweaker to do do this part.. still camera failed
6. restocked to 2.3.3 using ODIN and tried above method..camera fail
7. flashed it to ICS CM 9.1 again..camera failed..
8. restocked to 2.3.3..
here's the weird part..
suddenly the camera worked, got it runnign for a couple of minutes..closed it..re installed flashlight.apk..then booommm..camera failed again..
I was like cursing myself for that wrong move..camera failed again..
it's so frustrating doin it over and over again..
can somebody help me flash this to froyo so I can try if the camera still fails..this will be my last attempt of fixing it..
pls guys do help me out..ty
EDIT: Ive rectified the problem..found out it was a hardware problem..I disassembled the the tab and switch it on and took of the the back facing camera while it's still on..and put it back..tried the cam and it ran flawlessly as before..after which..I rebooted the system..went to recovery mode,did a factory reset,cleared cache..and rebboted the system..and restock it with its originall GB ROM..
I know there's lots of thread asking how to return to stock but please read on. I updated to CM10 a while ago but my phone kept freezing so I changed to the ULTIMATE jellbean rom but my phone still kept freezing. Today I decided to return to the original GB stock rom to try and fix the issue.
When I flashed the ROM in Odin it got stuck at FactoryFS :S, this resulted in a semi-brick and I had to rebuild the partitions with ADB. After unbricking I installed Rocketrom from my SD card but it cannot install apps and give me a german error message saying something about encryption and factory resets every time. Now if i try to flash aything through CWM it just hangs at installing and does nothing, please help