dead Galaxy s1 - Galaxy S I9000 Q&A, Help & Troubleshooting

Galaxy-ul meu este mort dupa ce un prieten "destept" a incercat sa faca flash cu firmewere de S2...phone does not turn on .. not go into download mode .. nothing .. not load ... just when you connect to the PC find something drivers
how can I fix the problem?
SOrry for my English

Try making or buying a download mode jig
http://forum.xda-developers.com/showthread.php?t=927499
That should get you into Download mode, and then it sounds like your computer recognises the phone, so you ought to be able to flash a Gingerbread ROM with Odin and then flash back to whatever you want from there.

ESEMCE said:
Try making or buying a download mode jig
http://forum.xda-developers.com/showthread.php?t=927499
That should get you into Download mode, and then it sounds like your computer recognises the phone, so you ought to be able to flash a Gingerbread ROM with Odin and then flash back to whatever you want from there.
Click to expand...
Click to collapse
not working..

Try charging, mabe out of juice, then jig
Sent from my GT-I9000 using Tapatalk 2

Related

cant conect to pc with muiu rom

hi have tried and tried to connect my galaxy s with the latest muiu rom,it did connect i am sure but now it will not,i do believe the Samsung drivers are no good for this can anyone help me please,i have tried searching but cant find very much on the subject thank you
un install the current samsung drivers in device manager
then plug your phone back into the pc and see if they re install.
also try to do this in download mode if it fails. worked for me before
azzledazzle said:
un install the current samsung drivers in device manager
then plug your phone back into the pc and see if they re install.
also try to do this in download mode if it fails. worked for me before
Click to expand...
Click to collapse
thanks but my pc cant see my sgs at all ,,,download mode ??? how ?

[Q] Samsung Galaxy S stuck on boot screen

Hi, i'm noob in Galaxy Flashing so this is my problem:
I have a Samsung Galaxy S GT-I9000 blocked from italian carrier.
Few times ago i tried to enable 3-buttons download/recovery mode installing Aries_P-SBL.tar.md5 with Odin. The installation finished successfully but the download/recovery mode still didn't work.
After some reboots (where the phone worked right), now the phone stucks in the boot screen (the one with Galaxy S GT-I9000 SAMSUNG).
With the JIG i can enter download mode but my computer can't detect the phone (Windows feels my USB connection but Odin does not detect it).
If i connect the phone to the computer in normal mode (not in download mode, so with stuck screen), Kies can detect the phone but says that it can't talk with phone in this way(like if it was in USB Debug mode).
I Hope someone can help me
Restart your computer>>>Go to task manager and close all Kies applications (I usually have 2 Kies running from startup)>>>Start Odin and select all the files>>>Put your phone into download mode and connect>>>It should be detected now.
If it is still not detected, close odin, disconnect phone. Start Kies go to tools and install drivers. Once this is complete. Close Kies and start from the top of this post...restart...
Solution Is HEIMDALL.....
Here Comes your solution:
You can easily back your phone with Heimdall.
It's a flashtool which is more complicated than ODIN.
If interesting,simply PM me and we will do it.
I'm Here...
Well,first go to here:
http://forum.xda-developers.com/showthread.php?t=755265
Second: Download 7-zip PC software & extract your official md5 firmware to obtain several other files.
Third:Search the web for a Heimdall How-To(if you didn't find,I'll provide You links)
Last:You'll flash the firmware via Heimdall & again your peace of mind will be back.
Try to reflash your phone normaly with another Rom, it should work
peter_dizai said:
Here Comes your solution:
You can easily back your phone with Heimdall.
It's a flashtool which is more complicated than ODIN.
If interesting,simply PM me and we will do it.
Click to expand...
Click to collapse
Sorry, your advice didn't work, Odin still doesn't detect the phone
Try to change the USB port and install ONLY the phone driver -if you don't find you can contact me.
Inviato dal mio GT-I9000 usando Tapatalk
I don't understand, your download mode works?
Sent from my Galaxy S with ICS 4.0.4 (Italy)
he said download mode works but odin cant detect the phone .
Try reinstalling the samsung usb drivers and/or try from another pc and see if it shows the same thing (meaning nothing) .
Hi,
sorry but i tried all the ways, Odin and Heimdall.
I tried Odin on Windows and Heimdall on MacOSX but always they say
"Failed to detect compatible download-mode device."
I'm sure that phone is in download mode
May i install drivers on OSX with Heimdall?
I have not original samsung USB cable, but i think this is not a problem
Rooted my GT-I9000, and now it has crashed!
First off all my Galaxy I9000 was trying to software update via Kies, and it failed. The it would not start, but i managde to root it with a stock "VOD" rom.. But after a while i wantet to root it back to "Nordic Version"... But i could not do this, because the 3 button combo dont work on my Galaxy I9000 anymore.. :/ So there for i baought a USB JTAG, that puts it into download mode. So far, So good But when it is finished rooting, it fails to mount/unmount a bunch of stuff.. I have a picture of the screen, so that you guys can se what the problem is. I have tryed to root it with the same version that worked before, but it dont work. I have also tryed with som pit files, and so on... I give up, i need help with my Samsung Galaxy S - GT-i9000. Please help me out with this..
Getting Hopeless...?
1)For you to become sure,my Galaxy S Aka I9000 was exactly the same as yours and right now there is nothing wrong with that of course after flashing by HEIMDALL.
2)Remember,if your are going to do anything,Your first and your last key,is your HOPE so be so hopeful and let's start to get over this.
3)Download I9000 USB driver from here and simply install it on WINDOWS OS.
http://hotfile.com/dl/48893334/93383a1/I9000_USB_driver.rar.html
4)Before Using Heimdall, Enter it's folder and you'll see another sub folder called driver and you'll see just ONE executable program,run it and follow these instructions:
(I'll Shortly Provide You A How-to)
5)Enter Heimdall and follow these instructions:
(I'll Shortly Provide You A How-to)
6)Flash firmware
7)Enjoy
8)Press my THX Button.
---------- Post added at 01:15 AM ---------- Previous post was at 01:07 AM ----------
Ghoststavanger said:
First off all my Galaxy I9000 was trying to software update via Kies, and it failed. The it would not start, but i managde to root it with a stock "VOD" rom.. But after a while i wantet to root it back to "Nordic Version"... But i could not do this, because the 3 button combo dont work on my Galaxy I9000 anymore.. :/ So there for i baought a USB JTAG, that puts it into download mode. So far, So good But when it is finished rooting, it fails to mount/unmount a bunch of stuff.. I have a picture of the screen, so that you guys can se what the problem is. I have tryed to root it with the same version that worked before, but it dont work. I have also tryed with som pit files, and so on... I give up, i need help with my Samsung Galaxy S - GT-i9000. Please help me out with this..
Click to expand...
Click to collapse
Ok,Right now I'm here and you are so damn lucky.
1-Simply put your phone into download mode with your cable.
2-Change your cable with an standard Samsung cable.
3-Download a stock firmware which contains 3 files(PDA,Phone,CSC)
4-Load Odin and flash the firmware.
5-All Done,How lucky Your Are.....
6-Feel Free to hit my THANX...
peter_dizai said:
Well,first go to here:
http://forum.xda-developers.com/showthread.php?t=755265
Second: Download 7-zip PC software & extract your official md5 firmware to obtain several other files.
Third:Search the web for a Heimdall How-To(if you didn't find,I'll provide You links)
Last:You'll flash the firmware via Heimdall & again your peace of mind will be back.
Click to expand...
Click to collapse
I tried your method but heimdall says that it can not find a connected download-mode device. My device is in download mode, i put it in this mode with JIG
Hi, excuse my for my stupid question,
there are problem in flashing with non original Samsung USB cable? Isn't it the same with any Micro USB adapter??
espinho said:
Hi, excuse my for my stupid question,
there are problem in flashing with non original Samsung USB cable? Isn't it the same with any Micro USB adapter??
Click to expand...
Click to collapse
generally no, but I recommend strongly to try another micro USB-Cable & another USB Port!
No one of these method does work for me,
any suggest?? my main problem is that the pc does not detect the phone when it's in download-mode. I know how to flash it, but there is not a program that can talk with it!
Can you try to make the operation on another computer?-install usb driver first...
Sent from my Galaxy S with ICS 4.0.4 (Italy)
mrchat9 said:
Can you try to make the operation on another computer?-install usb driver first...
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Click to expand...
Click to collapse
i'll try and i'll make you know
At this time maybe an operating system problem...I'm waiting for your answer!
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Solved
mrchat9 said:
At this time maybe an operating system problem...I'm waiting for your answer!
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Click to expand...
Click to collapse
Hi, changing computer worked. I tried on OSX and didn't work, on Windows 7 on VMware Fusion and didn't work. After all, i tried on a laptop with Windows XP and it solved my problem. Now i get a mobile network error, with one carrier it works and with another it does not. The mobile network detected is always really low.

[Q] Help rooting the N-7000

Aight what I have so far is:
1) When going to Download mode please press UP on VOL afterwards so it actually loads the mode itself
2) Then ODIN recognizes it
3) Mine is a KL3, the zImage method always brings me a Permission Denied
4) ODIN now recognizes my phone for downgrade BUT i get a Write Operation Failed.
Moving from Windows 7 to XP 32bit, the Note is installing itself as a modem!
Download and install kies from Samsung.com. If the problem still exists, try another data cable may help.
Sent from my GT-N7000 using XDA
http://downloadandroidrom.com/file/...ung_USB_Driver_for_Moblie_Phones_v1_4_6_0.exe
Download and install.
On a side note: Estoy loco pa que Cotto le rompa la cara a ese sangano Mayweather!
kelvin fong said:
Download and install kies from Samsung.com. If the problem still exists, try another data cable may help.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
I had kies installed, ill try out your suggestions
Lance Uppercut said:
http://downloadandroidrom.com/file/...ung_USB_Driver_for_Moblie_Phones_v1_4_6_0.exe
Download and install.
On a side note: Estoy loco pa que Cotto le rompa la cara a ese sangano Mayweather!
Click to expand...
Click to collapse
Ill do this after work. Thanks for that driver, it shows up when in normal usb connection but not during download mode. About the fight, lets see if cotto can do something there... we dobt want another pacquiao-esque performance!
Mornin',
So yeah, I'm awake and doing this. Good morning / whatever to all of you around the world
1char...
2chars...

update fail from custom recovery , cant conect to pc

hi to great forum for android , i am having problem with my GT-I9070, i hawe rooted my phone to J.B.XXLQE version, with odin 3.07, but my phone was freezing an very slow so i hawe to unroot to ginger bread , here its start my problem, i think its bricked , i was playing and manage to conect to pc with odin 1.8 an go back to 2.3.6 G.B. , now phone its working ok but when i conect to pc nothing hapend just batery charge and sound beep, i can go to download mode , and recovery mode , but if i try update from recovery every time i get E: VERIFICATION SIGN FAILED ,
i was thinking if i update wit jet mode or other i can fix it now its
-I9070XXLK2
-KERNEL 2.3.35.7-1211579
sory for bad english
mehanikus said:
hi to great forum for android , i am having problem with my GT-I9070, i hawe rooted my phone to J.B.XXLQE version, with odin 3.07, but my phone was freezing an very slow so i hawe to unroot to ginger bread , here its start my problem, i think its bricked , i was playing and manage to conect to pc with odin 1.8 an go back to 2.3.6 G.B. , now phone its working ok but when i conect to pc nothing hapend just batery charge and sound beep, i can go to download mode , and recovery mode , but if i try update from recovery every time i get E: VERIFICATION SIGN FAILED ,
i was thinking if i update wit jet mode or other i can fix it now its
-I9070XXLK2
-KERNEL 2.3.35.7-1211579
sory for bad english
Click to expand...
Click to collapse
You said update from recovery? What you want to do, for custom ROM you need to have TWRP recovery.
You need to do this: http://forum.xda-developers.com/showthread.php?t=1873119
And you need to be rooted to install custom ROM.
shut_down said:
You said update from recovery? What you want to do, for custom ROM you need to have TWRP recovery.
You need to do this: http://forum.xda-developers.com/showthread.php?t=1873119
And you need to be rooted to install custom ROM.
Click to expand...
Click to collapse
But i cant conect to pc, and this option is for pc conect with usb ,
Does odin recognize the phone once connected in download mode?
spleen1981 said:
Does odin recognize the phone once connected in download mode?
Click to expand...
Click to collapse
NO , when i conect to pc only batery charge and beep
mehanikus said:
NO , when i conect to pc only batery charge and beep
Click to expand...
Click to collapse
Did you try with Debug USB option activated?
I'd also try to uninstall/install again pc drivers
spleen1981 said:
Did you try with Debug USB option activated?
I'd also try to uninstall/install again pc drivers[/QUOTE
I did try reinstall drivers and yes usb debuging . second usb cable , usb port , other comp. nothing hapend, and option *#7284# pda modem swich
Click to expand...
Click to collapse
Did you try after enabling the debug usb option in developers settings?
Inviato dal mio GT-I9070 utilizzando Tapatalk
mehanikus said:
NO , when i conect to pc only batery charge and beep
Click to expand...
Click to collapse
For Odin you must be in Download mode. To power on phone by holding 3 buttons. Volume Down + Home + Power.
shut_down said:
For Odin you must be in Download mode. To power on phone by holding 3 buttons. Volume Down + Home + Power.
Click to expand...
Click to collapse
I know that , i dont know what i did with my phone , do you think is problem with usb conector on phone, before unroot evrithing work
mehanikus said:
I know that , i dont know what i did with my phone , do you think is problem with usb conector on phone, before unroot evrithing work
Click to expand...
Click to collapse
How dis you unroot? One thing is unroot, the other is going from JB to GB.
Послато са GT-I9070 уз помоћ Тапатока
I hawe downloaded G.B. from this site for my country http://samsung-updates.com/region/?region=TWO
turn usb debuging , go to download mode and launch odin , select pda on odin , select auto reboot and f reset time and start and phone is working , and for unrot, super user from apk fuul unroot
mehanikus said:
I hawe downloaded G.B. from this site for my country http://samsung-updates.com/region/?region=TWO
turn usb debuging , go to download mode and launch odin , select pda on odin , select auto reboot and f reset time and start and phone is working , and for unrot, super user from apk fuul unroot
Click to expand...
Click to collapse
I think i get your point.
Install Samsung Kies software in your Pc, its use as a driver that read your device in pc. And then you can do what you want.
Its happens with me
IF u r download mode not showing via (sound down+home+power) use USB zig its using for unbrick devices google it

My IDOL 4s Android phone in boot loop and undetectable

Greetings to all,
My Alcatel IDOL 4s (Android) is stuck in a boot loop, it does not get in recovery mode no matter what I do, the only mode i can get into is Download mode.
I tried the official Mobile Update tool from Alcatel, it requires the phone to be swithched OFF and connected during the process of flashing the stock rom, but the phone just enters the boot loop (powers on) as soon as it is connected to the computer. It is also undetectable by fastboot or ADB both on linux and windows when it is in Download mode or in the boot loop state.
Is there any any way I can re-flash the stock ROM on this phone to restore it to a working condition?
regards to all,
what model do you have? Mine is the 6055U and I use Sugar QCT for stock reflash
PizzaG said:
what model do you have? Mine is the 6055U and I use Sugar QCT for stock reflash
Click to expand...
Click to collapse
Mine is 6070K, the issue is that my phone is not detectable by the PC when connected. Do you think that this tool will enable me to re-flash even if the phone is not detectable?
haniysf said:
Mine is 6070K, the issue is that my phone is not detectable by the PC when connected. Do you think that this tool will enable me to re-flash even if the phone is not detectable?
Click to expand...
Click to collapse
amigo pudiste resolver tu problema yo estoy pasando por lo mismo 4s 6070o:confuso:
PizzaG said:
what model do you have? Mine is the 6055U and I use Sugar QCT for stock reflash
Click to expand...
Click to collapse
I Can't use Sugar QCT, the app reported a error, can you test it for me?
Jhonny00720 said:
I Can't use Sugar QCT, the app reported a error, can you test it for me?
Click to expand...
Click to collapse
Sugar doesn't work anymore, rooting the 6055U is dead unless you already have TWRP on the phone.
PizzaG said:
Sugar doesn't work anymore, rooting the 6055U is dead unless you already have TWRP on the phone.
Click to expand...
Click to collapse
I have TWRP installed, and a backup.
haniysf said:
Greetings to all,
My Alcatel IDOL 4s (Android) is stuck in a boot loop, it does not get in recovery mode no matter what I do, the only mode i can get into is Download mode.
I tried the official Mobile Update tool from Alcatel, it requires the phone to be swithched OFF and connected during the process of flashing the stock rom, but the phone just enters the boot loop (powers on) as soon as it is connected to the computer. It is also undetectable by fastboot or ADB both on linux and windows when it is in Download mode or in the boot loop state.
Is there any any way I can re-flash the stock ROM on this phone to restore it to a working condition?
regards to all,
Click to expand...
Click to collapse
I know that it sounds like an idiot, but if you try to connect the handset to Mobile Q Upgrade when it says you to connect the phone (shutted down) and if you connect it directly in Download Mode?

Categories

Resources