So i decided to make this video on different benchmarks , Check it out below... i also ran the GLbenchmark, which is the test lots of people said causes the thermal throttling, i didnt tick the triangle tests, and just did the Egypt tests, on and off screen and scores are very good,
Video- http://youtu.be/rimEV1Ou_WU
Iv also attached my glbenchmark scores to this thread as well as the CPU spy and it doesn't look like there was any thermal throttling going on here , The device did get warm, but not HOT , and i actually did the GLbench last , after all the other tests...
Related
Hey guys,
Posted under general questions and to my surprise not one reply in a week. So, I'm curious to know somethings about overclocking these tablets. What settings are you using? Have you had any issues with overheating and shutting down?What settings are recommended for web browsing, gaming etc? Let's talk linpack and benchmark testing. Where do you rank and how did you get there? Let's talk SetCPU benchmark scores, what kind of results can you squeeze out out of your device? How does someone pull off 41916.7 MFLOPS?! (Nexus) I'll start......
GT-7310 Running 3.2 / Motley Kernal / SetCPU
SetCPU Scores
Long Bench @ 178ms / Native @ 621.5ms
Linpack Scores
Single thread @ 42.4 MFLOPS / Multi thread @ 83.2 MFLOPS
Obtained running 1504MHz max / 216MHz min
Note: I have overheated and shutdown at 1504 web browsing. At 1400MHz I have had no issues. I see some scores are through the roof. I'm not to familiar with Overclocking and just would like to hear what you guys have to say. Thanks in advance. I may of posted this in the wrong area and I apologize. I would like this to be a thread on the topic rather than a Q & A.
Well I personally run my tab @1200Mhz with -25mV on the 1000&1200 steps, but anyhow, due to the interactive governor the most used setps are 216, 456 and 1200. I don't undervolt the lower test for stability reasons as I mostly work on the tablet so I don't want to test yet how low uV can go, don't have the time to test it right now. (Even though I'm pretty sure -25mV even on lower steps is still largely stable)
As for the set CPU test I tried them out on 1504Mhz: 150 and 595ms. I once pushed the tab to 1600Mhz but it ended up in an immediate freeze so I will skip on trying that again.
I don't have linpack but tried running GLBench 2.1 Egypt and the score was pretty embarrasing
Thanks for sharing. Since my post I have flashed aokp-34 galaxiansoup with v-3 of the Motley Kernal. Running 1400 on 216 no undervolting and am seeing a tiny increase in numbers. I'm still stumped on these linpack scores. This thing runs great. No complaints whatsoever. Anyone want to chime in on the best bench testing app or what the stock numbers on these 7310's are?
everyone will tell you that benchmark scores aren't very representative!
run the test 5 times and each time you will get a slightly different score.
i don't really care about benchmarking, as long as i feel that my tab runs smooth (which i think it does) im pretty happy. im normally at 1,4ghz and everything is smooth and stable!
Thanks for sharing. I couldn't agree more. My tab runs great at the same speed settings as yours. I just don't understand the numbers and how certain device's have like 100 times my mflops......I'm a numbers guy by nature, I like to see it on paper....but I am content with my device. Just always looking to make it cleaner and faster.....you know the addiction I'm sure.
Are you happy with this kernel? I found it stuttering and laggy...
zooster said:
Are you happy with this kernel? I found it stuttering and laggy...
Click to expand...
Click to collapse
Yes, I've not ran into any issues. Totally impressed and content with v3 motley. If there is a better kernel out there I'd love to hear about. I have yet to look, no need.
Been running a few custom profiles via Setcpu peaking @1.5GHz on B37 for a few weeks now. Other than a force close or two and an occasional browser freeze, which is normal with these roms, this thing is running pretty snappy. Gotta watch the temp though.
Sent from my GT-P7310 using xda premium
I sure hope that you've set up your profiles so that your tab overclocks to 1.5Ghz only occasionally, it's a thing that you HW can handle it, but will it on the long term?
Also, I regret that you can't overclock the bus frequency to get an overall performance boost (the GPU could really use it..) as on the Galaxy S
Yeah, I'm only pushing 1.5 on occasion, per profile. I normally run 1.4 all day everyday for the last 3 months with heavy use and no issues. Just gotta watch the temp. I've had mine to 113 degrees which kinda scared me.
Sent from my GT-P7310 using xda premium
Hi N7 fellow users
i get MAX 2600 3D and 350 2D in antutu and quadrant though i'm all the time OC the GPU to 520mhz
is that normal ?? i'm running the latest Paranoid Android rom along the latest Franco kernel.
That is about what I get for 3D. If you go to the developer menu you can improve your 2D performance by checking the "Force GPU rendering" . For what it's worth my 2D for Quadrant went to about 1000 after the checking that option.
Sent from my Nexus 7 using Tapatalk HD
Thanks for your reply
My htc one X was getting 39xx, 1k higher than my nexus
though they use nearly the same gpu.
Homurato said:
Thanks for your reply.
My htc one X was getting 39xx, 1k higher than my nexus
though they use nearly the same gpu.
Click to expand...
Click to collapse
quadrant does not measure gpu, it measures fps. and we are limited to 59fps no matter how much we overclock the gpu. use a benchmark like windmill, or basemark taiji, to test your gpu and what tweaking your gpu does. quadrant is an old, out of date benchmark.
simms22 said:
quadrant does not measure gpu, it measures fps. and we are limited to 59fps no matter how much we overclock the gpu. use a benchmark like windmill, or basemark taiji, to test your gpu and what tweaking your gpu does. quadrant is an old, out of date benchmark.
Click to expand...
Click to collapse
i guess i have to forget about all this paranoia coming from the low benchmark scores since every game works xD
(except horn strangely runs about 25 fps it seems, even though i'm oced to 520mhz)
Low of diminishing returns, if you over clock it doesn't mean ull always get higher scores, after ur GPU gets heated up it start to show lower and lower scores.
GPU is stable @ 446 (beyond that when ever it gets heated up it will cause touch and other issues)
Source: Read kernel Developers OP once a while
Just for the fun of it I asked a friend to benchmark our devices , both 4Xs.We used geekbench 2 .My friend got a score of 1160 and I got 1214.
The thing is when i searched in google , I saw that the 4X had achieved a score of 1661.I tried with various apps to set the cpus at max frequency and with performance governor , but nothing changed.Still over 30% down from the max score shown online.
Is it possible ,the better battery efficiency we got in V10h, to be originated from downgrading the performance of the cpu ?
What do you think ?
Hey! Not sure about question in general, sorry. But my Antutu benchmark did go sown by over a thousand when I upgraded to v10h. I did start a thread on it, had a few responses from similar. Search forums for v10h and Antutu. You may be on to something. Sorry couldn't be of more help.
Sent from my LG-P880 using xda app-developers app
Ι'm not worried about this matter at all , but it was a big suprise to see such big difference.A friend of mine who has a xiaomi M2 scored 2070 with his s4 krait cpu.Almost twice as much.It makes you wonder...
Thats a pretty big difference, I'm scoring about 1600 on geekbench.
Maybe ur having a faulty device?
i dont think so .On quadrant i get over 5200 score and on antutu over 14000.
Many of us in a 4X forum , we get scores in antutu from 13900 - 14200 so there arent big differences between them.
What rom version do you use ?
I am pretty new to OC so I cant figure out how to do it for 1.5 or 1.6 GHz.
Even when undervolting A1 kernel it is so unstable and cant pass antutu benchmark without crash and reset.
My best values are attached. Its A1 kernel, performance and cfq at 1.4ghz
I hope you will give me advice how to do better cpu benchmark values.
http://oi47.tinypic.com/2ia4ug7.jpg
You need a kernel that supports it. Look for one that is specific to your device.
God promised men that he'd put beautiful women in all corners of the world. Then he laughed and laughed and made the world round
My experience with undervolting is that the gain, battery wise, is nominal, hence I don't care UV.
I remember I got ~7300 in Antutu running CM10 @1500 with interactive governor. But benchmark
isn't everything, and I'm most happy with stock ICS with A1's 1.8.3c @1400 (interactive). I would
prefer running it @1500, but it tends to get a wee bit warm when doing this.
Of course I use kernel designed for my device.
In game overclocking for high performance are numbers important. Every 20pts in antutu benchmark (3d section) does matter in ingame fps (in my case shadowgun deadzone) and you can See it. So nobody has better score? :'(
I believe this is around the highest I got. No, you can't get too much higher. I am quite frustrated at this devices development - the xoom gets much better development and optimisation.... It is all about optimisation.
I checked my score on Antutu benchmark. I see that my device score for 3D Graphic was as low as 1200+ while average is 2100+
Tried with Gpu rendering on/of diff CPU max speed but the score remains low.
I have also noticed lags in heavy games.. Is my phone getting too old?