Hello,
Forgive me for my bad English, I'm French, I unlock the bootloader via the Motorola site, it has to work perfectly, but I will wish to reset the lock the bootloader, how do I proceed? On the Motorola site there is not any procedure.
Pierre
If you are doing for warranty purposes it is still voided and they will charge for repair.
But if for some silly reason you need to lock it...
Code:
fastboot oem lock
Sent from my MB886 using Tapatalk 2
Using your code I get the following message appears:
FAIL: run fastboot oem lock Please begin first!
Click to expand...
Click to collapse
What to do?
Code:
C:\sdk\tools>cd..
C:\sdk>cd platform-tools
C:\sdk\platform-tools>fastboot oem lock
< waiting for device >
...
(bootloader) FAIL: Please run fastboot oem lock begin first!
OKAY [ 0.550s]
finished. total time: 0.550s
pierre144 said:
Using your code I get the following message appears:
What to do?
Code:
C:\sdk\tools>cd..
C:\sdk>cd platform-tools
C:\sdk\platform-tools>fastboot oem lock
< waiting for device >
...
(bootloader) FAIL: Please run fastboot oem lock begin first!
OKAY [ 0.550s]
finished. total time: 0.550s
Click to expand...
Click to collapse
That's how it was supposed to work... contact Motorola I guess. Why bother locking anyway..?
mattlgroff said:
That's how it was supposed to work... contact Motorola I guess. Why bother locking anyway..?
Click to expand...
Click to collapse
I will contact Motorola, I want to put the bootloader as before for security reasons.
pierre144 said:
I will contact Motorola, I want to put the bootloader as before for security reasons.
Click to expand...
Click to collapse
Won't change a thing in terms of security, except possibly for DRM content. Read what bootloader tells you. I believe the sequence is "fastboot oem lock begin", then firmware flash, then "fastboot oem lock".
Skrilax_CZ said:
Won't change a thing in terms of security, except possibly for DRM content. Read what bootloader tells you. I believe the sequence is "fastboot oem lock begin", then firmware flash, then "fastboot oem lock".
Click to expand...
Click to collapse
I wish to sell on my phone so i want to re-lock it to remove the bootloader warning. Unfortunately the above steps don't work for me either and I cant see any mention of how to lock the phone again on motorolas site?
f1ux said:
I wish to sell on my phone so i want to re-lock it to remove the bootloader warning. Unfortunately the above steps don't work for me either and I cant see any mention of how to lock the phone again on motorolas site?
Click to expand...
Click to collapse
Then can't you use fastboot to put the original boot logo back on instead of relock?
Sent from my rooted XT890 with unlocked bootloader using XDA premium
Past androids: HTC Hero - Sony X10 mini (rooted and running mini cyanogenmod) - Orange Stockholm (rooted to remove orange's skin and bloatware) :3
max choco found a way to relock! here you find the guide:
http://argendroid.com/topic-GUIA-Re...upera-tu-garantía-volver-al-estado-de-fabrica
mercurio. said:
max choco found a way to relock! here you find the guide:
http://argendroid.com/topic-GUIA-Re...upera-tu-garantía-volver-al-estado-de-fabrica
Click to expand...
Click to collapse
I tried following the guide.
I'm on the Retail EU firmware 4.1.2
When I try to flash the system, it shows some error about the file size (the 100MB limit?) and when I try to lock the bootloader without flashing system - but everything else - it tells me that something in my system is wrong...
What (if any) is the fastboot command to MultiFlash the system_signed manually?
Sayuuk said:
I tried following the guide.
I'm on the Retail EU firmware 4.1.2
When I try to flash the system, it shows some error about the file size (the 100MB limit?) and when I try to lock the bootloader without flashing system - but everything else - it tells me that something in my system is wrong...
What (if any) is the fastboot command to MultiFlash the system_signed manually?
Click to expand...
Click to collapse
I have that problem too... 100MB limit comes on screen.
I haven't found JB Retail British, only ICS Retail British. I want to be careful with flashing ... if you flash JB to ICS you will brick..
Any news about that?
mercurio. said:
max choco found a way to relock! here you find the guide:
http://argendroid.com/topic-GUIA-Re...upera-tu-garantía-volver-al-estado-de-fabrica
Click to expand...
Click to collapse
Does not work in "Razr HD" because we do not have the files "bos_signed, gpt_signed, motoboot and radio_signed" in firmware. If anyone can help, I really need. Grateful.
its not possible man
felipe_net said:
its not possible man
Click to expand...
Click to collapse
You tried it?
Enviado desde mi Moto HD
LOCK
fastboot oem lock begin
fastboot flash boot boot.img
mfastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash logo logo.bin
fastboot erase userdata
fastboot erase cache
fastboot oem lock
use this mfastboot View attachment mfastboot.zip for command - mfastboot flash system system.img
system.img must be solid file ! if not and you have multiple files, try renaming the last of them in system.img
Good Luck
borik88 said:
LOCK
fastboot oem lock begin
fastboot flash boot boot.img
mfastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash logo logo.bin
fastboot erase userdata
fastboot erase cache
fastboot oem lock
use this mfastboot View attachment 2546578 for command - mfastboot flash system system.img
system.img must be solid file ! if not and you have multiple files, try renaming the last of them in system.img
Good Luck
Click to expand...
Click to collapse
And all these files? where can i download that? (boot.img, system.img, recovery.img, logo.bin)
Thanks!
Finally, Re-Lock Failed
I am not getting download link of fastboot oem lock for razr i
Related
How can we relock the bootloader on this, effectively restoring to stock?
Delete
Lol guess it really is that easy.
Though remember if you unlocked it via motorolas website relocking it will have no effect on warranty because that was void when you got the unlock code.
raze599 said:
Though remember if you unlocked it via motorolas website relocking it will have no effect on warranty because that was void when you got the unlock code.
Click to expand...
Click to collapse
Pure edition doesn't void warranty
km8j said:
Pure edition doesn't void warranty
Click to expand...
Click to collapse
as far as motorola rep represents it still does as of today, unless someone higher up speaks differently
vince0312 said:
as far as motorola rep represents it still does as of today, unless someone higher up speaks differently
Click to expand...
Click to collapse
https://forums.motorola.com/posts/677736c888?commentId=805908#805908
cam30era said:
Fastboot oem lock
Click to expand...
Click to collapse
Nope
Delete
cam30era said:
Give this a try:
1) fastboot oem lock begin
2) flash images without rebooting
3) erase cache and adata
4) fastboot oem lock
Click to expand...
Click to collapse
What images?
Delete
cam30era said:
The factory recovery images from Motorola > https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
Note that it appears that the images for the 2014 Pure have not yet been posted by Motorola, as far as I can see. Means the commands in my post above won't work, yet.
Click to expand...
Click to collapse
So why can't we just relock the bootloader? I don't understand.
From the Motorola site:
FLASH AND RELOCK YOUR DEVICE
After downloading the image for your device:
Unzip the image.
Put your device in fastboot mode.
NOTE: You must use the Motorola fastboot utility to flash (included in the Darwin/, Linux/ or Windows/ directory). Please do NOT use the Android fastboot utility
Follow the flashing steps in the .xml file that was included in the package.
A typical flashing sequence includes all these partitions, but might vary depending on your product - so please use the sequence in the .xml file in your package: $ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot reboot You also have the option to erase all the data on your device with$ fastboot erase userdata
$ fastboot erase cache
After performing this sequence, you can relock your device with $ fastboot oem lock.
Click to expand...
Click to collapse
marvin02 said:
From the Motorola site:
Click to expand...
Click to collapse
Our phone is not there.
km8j said:
So why can't we just relock the bootloader? I don't understand.
Click to expand...
Click to collapse
It would appear that Motorola has made this needlessly complex. I do not understand why, either. I've had about a dozen Android devices (phones and tablets), and this is the only device I've ever seen where the simple "fastboot oem lock" command wouldn't work.
km8j said:
Our phone is not there.
Click to expand...
Click to collapse
Not yet, but I have no reason to believe that the procedure will be different.
marvin02 said:
Not yet, but I have no reason to believe that the procedure will be different.
Click to expand...
Click to collapse
Does no one have the stock images?
Chances are it won't show as locked.... It'll show as "relocked" like the 2013.
Just a guess.
KJ said:
Chances are it won't show as locked.... It'll show as "relocked" like the 2013.
Just a guess.
Click to expand...
Click to collapse
relocked? what do you mean? is there some indication that it's relocked?
i come from a nexus, so idk how it is with this phone
0.0 said:
relocked? what do you mean? is there some indication that it's relocked?
i come from a nexus, so idk how it is with this phone
Click to expand...
Click to collapse
That's how the 2013 worked. There's locked. Unlocked. And relocked. It won't go back to locked status. Only relocked.
Don't see why they'd change that... But maybe.
I have the XT-1052 version of Moto X and its running the Asia Retail firmware. I had unlocked the bootloader and flashed CM12 but returned to stock rom through this guide http://forum.xda-developers.com/moto-x/general/retail-firmware-uploaded-xt1052-t2976596. I will be selling the device and want to re lock the bootloader. Can i type the ''fastboot oem lock'' command in mfastboot tool and re lock the bootloader? Also, will it erase the whole data on the device?
KD25 said:
I have the XT-1052 version of Moto X and its running the Asia Retail firmware. I had unlocked the bootloader and flashed CM12 but returned to stock rom through this guide http://forum.xda-developers.com/moto-x/general/retail-firmware-uploaded-xt1052-t2976596. I will be selling the device and want to re lock the bootloader. Can i type the ''fastboot oem lock'' command in mfastboot tool and re lock the bootloader? Also, will it erase the whole data on the device?
Click to expand...
Click to collapse
Yes, fastboot oem lock will lock it, and no it will not wipe data. Only unlocking wipes data.
But you status code will show relocked you can never get status code back to locked once unlocked.
Travisdroidx2 said:
But you status code will show relocked you can never get status code back to locked once unlocked.
Click to expand...
Click to collapse
Correct. Whoever has the phone will be able to see the "tamper seal" that shows the bootloader was previously unlocked, but is now locked again.
I would provide whoever you sell the phone to the bootloader unlock code so they can unlock in the future if they so desire. Not sure if they can request the code from Motorola again or not.
fury683 said:
Correct. Whoever has the phone will be able to see the "tamper seal" that shows the bootloader was previously unlocked, but is now locked again.
I would provide whoever you sell the phone to the bootloader unlock code so they can unlock in the future if they so desire. Not sure if they can request the code from Motorola again or not.
Click to expand...
Click to collapse
I tried it but it asks me to flash the signed images. The link i mentioned above comes with an XML file which dictates the steps RSD should be following, right? So if i upload the XML file can you edit the command line and add the command? I am not an expert in this stuff.
i have relocked flashing manually with fastboot, not sure if you add the oem lock cmd to the xml will work.
fastboot oem lock begin
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash logo logo.bin
fastboot erase userdata
fastboot erase cache
fastboot oem lock
hbenz2008 said:
i have relocked flashing manually with fastboot, not sure if you add the oem lock cmd to the xml will work.
fastboot oem lock begin
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash logo logo.bin
fastboot erase userdata
fastboot erase cache
fastboot oem lock
Click to expand...
Click to collapse
The files that are present in the rom folder are boot.img, fsg.mbn, gpt.bin, logo.bin, motoboot.img, NON-HLOS.bin, recovery.img and system.img. Can you modify the list of commands to add the aditional files. Thanks.
just flashing the above is enough to relock. Flash away
Wireless...
hbenz2008 said:
just flashing the above is enough to relock. Flash away
Wireless...
Click to expand...
Click to collapse
Thanks man. Will update about how it goes.
I've searched and searched and the rom i have installed is not the uk version and the phone won't let me lock the boot loader. where can i find the stock uk rooms and how do i do it on a mac? help?
jesus h christ
here have the files on the OP attachments
here have all the ROM's stock
the command are the some as any other back to stock help...
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem lock
fastboot reboot
if you get a error on the command
fastboot flash partition gpt.bin
try to do without it
thanks man will try now
nah this don't work
when i try to lock it it says sign flash signed images firstly, 2nd command i get an error and the 3rd also an error. every other command other than fastboot oem lock worked, so i think I'm on the uk stock rom(its not in the link you posted btw, i got it else where).
yeah I'm on stock gb and am getting ota updates but my boot loader is still unlocked?
crozbomb said:
when i try to lock it it says sign flash signed images firstly, 2nd command i get an error and the 3rd also an error. every other command other than fastboot oem lock worked, so i think I'm on the uk stock rom(its not in the link you posted btw, i got it else where).
yeah I'm on stock gb and am getting ota updates but my boot loader is still unlocked?
Click to expand...
Click to collapse
the lock is the last command, if you don't flash all the files in order the last command will not work, only exception is the gpt.bim, but is a maybe...
so if you have error principal on line 3, you need to check if the file exist, it command is flashing a file, if the file don't exist will not flash and a error show, and check all the command again, try and make a print screen of the process and the folder with all the file, and put it here...
if you have a full original Motorola ROM it must work, if everything check the rom is the probem.
I know i may have check everything command files it all , but i must try all possibilities.
and way you need to lock it?
i don't use mac, just windows and the PC or MAC is not the problem becouse i use that some order of commnad's last time i lock my phone but i lock just to see if is possible because after you unlocked you never need to change for noting.
bootloader have 3 stats:
Status code 0 =locked with warranty
Status code 3 = unlocked without warranty
Status code 2= re-locked but also without warranty
Status code 1 is unknown.
you can receive and install the OTA if you have the stock ROM no changes no root + stock recovery and boot images, bootloader status doesn't change a ting.
the only uses for re-locked it is to test if you can, or test if the rom is full stock or try to send for repair but in that last depending on the region it will not be repair for free, because it loses the warranty after bootloader unlock, but if yours region don't care for bootloader status, or the help center care but don't notes it you can try and have success.
Hello need help tracking down stock turbo firmware. The Motofirmware website (http://motofirmware.center/files/category/23-droid-turbo/downloads) are corrupted. The links in this thread are all dead: http://forum.xda-developers.com/moto-maxx/general/quark-stock-firmware-moto-maxx-droid-t3063470. Does anyone know of another source for stock 5.1?
http://motofirmware.center/
Stanleywinthrop said:
Hello need help tracking down stock turbo firmware. Does anyone know of another source for stock 5.1?
Click to expand...
Click to collapse
Here is the file download link for the latest xt1254 droid turbo 5.1 lollipop firmware:
https://www.androidfilehost.com/?fid=24052804347843637
Thanks, jala, but if you had bothered to fully read you'd see that the files on that website are corrupted.
jalal-jap said:
http://motofirmware.center/
Click to expand...
Click to collapse
Thanks, classic, i'll give this a try.
classic757 said:
Here is the file download link for the latest xt1254 droid turbo 5.1 lollipop firmware:
https://www.androidfilehost.com/?fid=24052804347843637
Click to expand...
Click to collapse
Stanleywinthrop said:
Thanks, classic, i'll give this a try.
Click to expand...
Click to collapse
No problem. Please let me know how it turns out.
Stanleywinthrop said:
Thanks, jala, but if you had bothered to fully read you'd see that the files on that website are corrupted.
Click to expand...
Click to collapse
i have same problem. extract it whit "7ZIP" and no corrupted for me.
http://www.rootjunkysdl.com/getdown...o/Firmware/VRZ_XT1254_SU4TL-44_44_CFC.xml.zip -> Full firmware (not OTA) of the most recent version of 5.1
TheSt33v said:
http://www.rootjunkysdl.com/getdown...o/Firmware/VRZ_XT1254_SU4TL-44_44_CFC.xml.zip -> Full firmware (not OTA) of the most recent version of 5.1
Click to expand...
Click to collapse
I get this error:
http://i.imgur.com/EOPsxnB.png
dmginc said:
I get this error:
http://i.imgur.com/EOPsxnB.png
Click to expand...
Click to collapse
Are you using RSDlite? If so, you're getting this error (I think) because the PRODUCT_CONFIGURATION.xml file has instructions for other phone models besides the Turbo in it. If I remember correctly, I got around this by deleting the info for everything not labeled QUARK_VERIZON in this file. However, since RSDlite basically just automates fastboot, a better option is to use fastboot to flash this firmware, in my opinion.
If you decide to flash the firmware this way, place all of the files from the full firmware into the directory that you installed fastboot, and enter the following commands after your phone is plugged into your computer in bootloader mode:
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
<repeat until all sparsechunks are flashed>
fastboot erase ddr
fastboot erase cache
fastboot erase userdata (NOTE: this command effectively performs a factory reset, and will erase all of your data)
Then boot, and you will have done everything that RSDlite would have done.
Oh thanks. Good info. Is there a write up on using fastboot anywhere? These forums are pretty poorly maintained and no good stickies anywhere
Edit: Oh, you edited your post. Awesome. Thanks.
The root junky fxz is that for rsd lite when I look at the contents the system image is in several sections and says system.img sparsechunk and has 10 sections. I have never seen this in an fxz. Is this a new way of flashing the system image.
TheSt33v said:
Are you using RSDlite? If so, you're getting this error (I think) because the PRODUCT_CONFIGURATION.xml file has instructions for other phone models besides the Turbo in it. If I remember correctly, I got around this by deleting the info for everything not labeled QUARK_VERIZON in this file. However, since RSDlite basically just automates fastboot, a better option is to use fastboot to flash this firmware, in my opinion.
If you decide to flash the firmware this way, place all of the files from the full firmware into the directory that you installed fastboot, and enter the following commands after your phone is plugged into your computer in bootloader mode:
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
<repeat until all sparsechunks are flashed>
fastboot erase ddr
fastboot erase cache
fastboot erase userdata (NOTE: this command effectively performs a factory reset, and will erase all of your data)
Then boot, and you will have done everything that RSDlite would have done.
Click to expand...
Click to collapse
Is it possible for me to relock my bootloader using adb fastboot? I don't want to do it accidentally while messing around with different roms and wiping my way back to stock.
When in fastboot, type "fastboot oem lock" (without the quotations"
Btrusa said:
When in fastboot, type "fastboot oem lock" (without the quotations"
Click to expand...
Click to collapse
Wouldn't that lock the bootloader?
Is it even possible to re-lock?
From what I understand he wants to avoid locking the bootloader...
Edit: nevermind I looked it up... Should have just done that the first time... ("I have seen quite of few people screw up their devices by not knowing what they are doing. So I am making this thread to simply tell people not familiar with fastboot what they should and should not do.
Fastboot oem unlock will unlock your bootloader and do a complete wipe of your device. As far as I know the only way for something to go wrong here is if you're device is low on battery and shuts off during the process. Either plug it in or have a "good" amount of juice left in your battery. To be 100 percent sure plug it in.
Before I get into oem lock IMHO you should only use this command for one thing only. Getting the device ready to send into motorola for the LGT upgrade or a another warranty repair or some sort. When done properly it is completely safe but there is no reason to do to go back to "stock".
Fastboot oem lock. Do not issue this command unless you are absolutely sure you have the correct software on your device. The correct software is what you get from the motodev site for your device. You need the official sofware images for your specific device AND REGION. If it is not released then DO NOT re-lock the device. If you have a OTA installed you will need to flash back to the motodev images first.")
dmginc said:
Is it possible for me to relock my bootloader using adb fastboot? I don't want to do it accidentally while messing around with different roms and wiping my way back to stock.
Click to expand...
Click to collapse
Nope
So is the fastboot flash motoboot bootloader.img just the Motorola "M" splash screen?
Sent from my XT1254 using Tapatalk
dmginc said:
So is the fastboot flash motoboot bootloader.img just the Motorola "M" splash screen?
Click to expand...
Click to collapse
No, that is the actual bootloader. The code that manages device startup, takes fastboot commands, and prohibits unsigned images from booting (when locked).
The splash screen is flashed with:
fastboot flash logo logo.bin
unhappybirthday said:
No, that is the actual bootloader. The code that manages device startup, takes fastboot commands, and prohibits unsigned images from booting (when locked).
The splash screen is flashed with:
fastboot flash logo logo.bin
Click to expand...
Click to collapse
So, back to my original question. When flashing back to stock with adb, but wanting to keep my bootloader unlocked, what should I do?
dmginc said:
So, back to my original question. When flashing back to stock with adb, but wanting to keep my bootloader unlocked, what should I do?
Click to expand...
Click to collapse
I can only speak from my experience. I was on the KitKat bootloader and used mofo to flash lollipop. I unlocked with sunshine and installed twrp. Then I flashed the lollipop bootloader with the fastboot command . Still unlocked.
Sent from my DROID Turbo using Tapatalk.
Hello guys i found the link for stock rom with dec update to relock bootloader and to claim your warranty or to further update to latest updates
Link - https://androidfilehost.com/?fid=889964283620776326
Run this file to relock bootloader(worked for me)
:-View attachment run.zip
Note: after locking bootloader, Don't forget to delete oem lock command and to add new command line for Sparshchunk 6
Success!
Works on my XT1806, I was able to lock the bootloader and flash firmware successfully.
Warranty is lost when you ask for unlock code!
yograjfire18 said:
Hello guys i found the link for stock rom with dec update to relock bootloader and to claim your warranty or to further update to latest updates
Link - https://androidfilehost.com/?fid=889964283620776326
Click to expand...
Click to collapse
These days, At moto, the warranty is lost as soon as you ask for the device unlock code. I had my device back to stock and unrooted but still, in jobsheet at service center It showed out of warranty!
tbiwalkar said:
These days, At moto, the warranty is lost as soon as you ask for the device unlock code. I had my device back to stock and unrooted but still, in jobsheet at service center It showed out of warranty!
Click to expand...
Click to collapse
did they charge you.
yograjfire18 said:
did they charge you.
Click to expand...
Click to collapse
Yes. 1970 for fingerprint sensor replacement
tbiwalkar said:
Yes. 1970 for fingerprint sensor replacement
Click to expand...
Click to collapse
was it broken or something else,
yograjfire18 said:
was it broken or something else,
Click to expand...
Click to collapse
It was not working. Ideally it should have been covered in warranty. see my jobsheet View attachment 4395062
tbiwalkar said:
Yes. 1970 for fingerprint sensor replacement
Click to expand...
Click to collapse
1970 dollars?? With that money you could have bought the iphone X
M1810 said:
1970 dollars?? With that money you could have bought the iphone X
Click to expand...
Click to collapse
lol, it's Rs. 1970 bro not Dollars
yograjfire18 said:
Hello guys i found the link for stock rom with dec update to relock bootloader and to claim your warranty or to further update to latest updates
Link - https://androidfilehost.com/?fid=889964283620776326
Run this file to relock bootloader(worked for me)
:-View attachment 4394734
Click to expand...
Click to collapse
Nice find
I was thinking to make a separate thread with link of my whole firmware folder lol
tbiwalkar said:
These days, At moto, the warranty is lost as soon as you ask for the device unlock code. I had my device back to stock and unrooted but still, in jobsheet at service center It showed out of warranty!
Click to expand...
Click to collapse
Maybe you forgot to relock your bootloader before taking it to service center.. :silly:
CheckYourScreen said:
Nice find
I was thinking to make a separate thread with link of my whole firmware folder lol
Maybe you forgot to relock your bootloader before taking it to service center.. :silly:
Click to expand...
Click to collapse
i think so too, bcs i have taken my moto e thrice because of being dead after unlocking and then updation , but my motherboard was replaced free of cost
yograjfire18 said:
Hello guys i found the link for stock rom with dec update to relock bootloader and to claim your warranty or to further update to latest updates
Link - https://androidfilehost.com/?fid=889964283620776326
Run this file to relock bootloader(worked for me)
:-View attachment 4394734
Click to expand...
Click to collapse
Ok..
I am total noob in this..!!
Can you explain.
I have downloaded the firmware file.
Now i didn't understand what you meant by RUN this file.!!
How to run?
CheckYourScreen said:
Nice find
I was thinking to make a separate thread with link of my whole firmware folder lol
Maybe you forgot to relock your bootloader before taking it to service center.. :silly:
Click to expand...
Click to collapse
Read his sentence. If you ask for unlock code you void warranty. It's no matter if you relock bootloader..
Wysłane z mojego Moto G (5S) Plus przy użyciu Tapatalka
QkiZMR said:
Read his sentence. If you ask for unlock code you void warranty. It's no matter if you relock bootloader..
Wysłane z mojego Moto G (5S) Plus przy użyciu Tapatalka
Click to expand...
Click to collapse
I asked for unlock key thrice but still remained under warranty
sharky_004 said:
Ok..
I am total noob in this..!!
Can you explain.
I have downloaded the firmware file.
Now i didn't understand what you meant by RUN this file.!!
How to run?
Click to expand...
Click to collapse
Run these commands to flash
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot oem reboot
fastboot oem reboot
yograjfire18 said:
Run these commands to flash
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot oem reboot
fastboot oem reboot
Click to expand...
Click to collapse
Thanks and
Sorry..but one last time.
I just have to run this commands ne bye one in a command prompt(in the extracted file folder of firmware).. am i right.?
sharky_004 said:
Thanks and
Sorry..but one last time.
I just have to run this commands ne bye one in a command prompt(in the extracted file folder of firmware).. am i right.?
Click to expand...
Click to collapse
just copy all at once and paste in cmd, flashing will start itself
CheckYourScreen said:
Nice find
I was thinking to make a separate thread with link of my whole firmware folder lol
Maybe you forgot to relock your bootloader before taking it to service center.. :silly:
Click to expand...
Click to collapse
I had relocked. I rather claimed that i never unlocked. They said that even if u request the BLUcode, warranty gets void.
Can I flash this on Rooted Moto G5s plus without loosing my Data? and re root again? How...?
virajkin said:
Can I flash this on Rooted Moto G5s plus without loosing my Data? and re root again? How...?
Click to expand...
Click to collapse
u can flash but it will be fomratted