Related
i have gingerbread 2.3.6 with kernal "jhlb2" i try with odin and not success .
how can i do the root ?
a1shay1 said:
i have gingerbread 2.3.6 with kernal "jhlb2" i try with odin and not success .
how can i do the root ?
Click to expand...
Click to collapse
You could read Dr Ketan's guide in Development a couple of times and then explain properly what you're doing if you're still struggling.
Sent from my GT-N7000 using xda premium
a1shay1 said:
i have gingerbread 2.3.6 with kernal "jhlb2" i try with odin and not success .
how can i do the root ?
Click to expand...
Click to collapse
Hello a1shay1, could you please elaborate what you are doing in order to root your device? This will help us to guide you better.
a1shay1 said:
i have gingerbread 2.3.6 with kernal "jhlb2" i try with odin and not success .
how can i do the root ?
Click to expand...
Click to collapse
No need to use ODIN for rooting.
Follow this
http://forum.xda-developers.com/showthread.php?t=1329360
what to choose ?
sahilarora2003 said:
No need to use ODIN for rooting.
Follow this
http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
i already try Easy rooting toolkit and after my note reboted i see that nathing happand
from what i undestand i need to use "Get root access on Newer GB ROM (non rootable directly)" ?
if yes so
"fter updating to newer ROM, you can flash CF root kernel from here
according to newer ROM kernel. And Flash it using Mobile Odin OR CWM."
my kernal is not listed there ,can i use LB1 ?
anyone. ..?
anyone pls
Could you post the details of your device? Go to Settings and About phone.
Your ROM is non rootable
You have following option
-Flash Pre rooted ROM, and update to existing ROM with Mobile Odin / CWM
-If you want to switch to ICS, flash it after wiping device and Root it.
Guide you can find on same link sahil have suggets you.
---------- Post added at 06:42 PM ---------- Previous post was at 06:40 PM ----------
YLNdroid said:
Could you post the details of your device? Go to Settings and About phone.
Click to expand...
Click to collapse
He wrote earlier LB2 kernel thats enough to decide.
about my option
about my option
1)after i flash pre rooted rom how can i update to my rom ?
2)what is the option to wipe ? it delete the all device ? becouse if yes how can i put custom ics,if there is nothing on the device ?
1. After flashing Pre rooted ROM you will have CWN
How to use is depend on which custom ROM you want to flash
For stock ROM this is the way
http://forum.xda-developers.com/showpost.php?p=20963730&postcount=3
2.Don't understand what you want to ask
about option number 2
the second opion seem to bee more easy than the first one
my Q is : the option wipe is like format in computer ? and using after that with odin is like to boot with bootable cd with os in computer ?
No, Format in computer requires to Install OS.
Here wipes means your device will reboot to factory set. Means everything will be there except stuff you have installed manually.
and
dr.ketan said:
No, Format in computer requires to Install OS.
Here wipes means your device will reboot to factory set. Means everything will be there except stuff you have installed manually.
Click to expand...
Click to collapse
someone just told me that after wipe the device will turn on properly - this what i wanted to know
so my new Q is : i want to put stunner rom so i just put him with odin AFTER WIPE .but how can i root the device after i put the stunner ?
IMHO plz you read more before modding your valuable device.
dr.ketan said:
IMHO plz you read more before modding your valuable device.
Click to expand...
Click to collapse
IMHO=In My Humble Opinion (just in case you were wondering what it meant)
Follow dr.Ketan's advice,a1shay1.
First root successfully,play around with simple things(stock,safe stuff) then think of modding.
Its very very easy,(believe me) to turn your Note a simple,humble paperweight.
suggest
A friend just suggest to root with
I9220LP1-N7000-ICS-REPACK.tar
And then to put the stunner from sd card
stil not good
zeeshanonlyme said:
IMHO=In My Humble Opinion (just in case you were wondering what it meant)
Follow dr.Ketan's advice,a1shay1.
First root successfully,play around with simple things(stock,safe stuff) then think of modding.
Its very very easy,(believe me) to turn your Note a simple,humble paperweight.
Click to expand...
Click to collapse
after i stay awake all night finally i found a solution here is little guid
1)wipe factory reset
2)wipe cash
3)with odin install I9220LP1-N7000-ICS-REPACK.tar
4)now you have root
5)wipe factory reset
6)install stunner (or other rom) ,from recover mode choose install from zip
and give the path in the sdcard were you put the rom
to install stunner 1.6.26
first install version 5.01 beta
and then install 1.6.26
a1shay1 said:
after i stay awake all night finally i found a solution here is little guid
1)wipe factory reset
2)wipe cash
3)with odin install I9220LP1-N7000-ICS-REPACK.tar
4)now you have root
5)wipe factory reset
6)install stunner (or other rom) ,from recover mode choose install from zip
and give the path in the sdcard were you put the rom
to install stunner 1.6.26
first install version 5.01 beta
and then install 1.6.26
Click to expand...
Click to collapse
So ure problem solved rt?
Good that you got that on your own.
a1shay1 said:
after i stay awake all night finally i found a solution here is little guid
1)wipe factory reset
2)wipe cash
3)with odin install I9220LP1-N7000-ICS-REPACK.tar
4)now you have root
5)wipe factory reset
6)install stunner (or other rom) ,from recover mode choose install from zip
and give the path in the sdcard were you put the rom
to install stunner 1.6.26
first install version 5.01 beta
and then install 1.6.26
Click to expand...
Click to collapse
For future reference, don't perform any wipes under re packed kernel, they have the bug. There shouldn't be a need for these re packed packages anymore steer clear of them. Don't do wipes or nandroid restores under ics kernels AT ANY TIME or you risk bricking.
Sent from my GT-N7000 using xda premium
can't start up my rooted SG Note
hello sir, hello everyone,
my deep apologies if this question already asked before. I have search this forum and don't find the right solution for my problem.
recently i rooted my SG note with CF-root using odin. Everything seem be alright on Odin. no weird error message. (I have rooted my GS S3 before and i success). But the problem is, my phone never start up. it's stop on samsung boot image and shut down again. I see a small yellow triangle appear on my phone. What's actually happen on my phone and how do i solve it. please everyone give an advice and point me to link that could help me.
thousand thank you for XDA member.
Hello,
I have a problem with flasinh my phone on slim bean
I'm on 2.3.6 version of gingerbred and i have rooted my phone and have installed cwm.
I have read that i need to flash my phone on cm9 or 10 and i tryed this.I have installed cm but then my phone didn't turn on -.- and I tryed about 10 times
Can somebody tell me what is the problem?
max_x said:
Hello,
I have a problem with flasinh my phone on slim bean
I'm on 2.3.6 version of gingerbred and i have rooted my phone and have installed cwm.
I have read that i need to flash my phone on cm9 or 10 and i tryed this.I have installed cm but then my phone didn't turn on -.- and I tryed about 10 times
Can somebody tell me what is the problem?
Click to expand...
Click to collapse
You sure you have enough battery on your phone? Go to download mode again and flash gingerbread, root the phone. Then copy the slim bean into your internal SD card. Now go into CWM and do three wipes (Cache, Dalvik and Data). And flash the ROM....It should be up and running after that...
rajamahbub said:
You sure you have enough battery on your phone? Go to download mode again and flash gingerbread, root the phone. Then copy the slim bean into your internal SD card. Now go into CWM and do three wipes (Cache, Dalvik and Data). And flash the ROM....It should be up and running after that...
Click to expand...
Click to collapse
i have 100% battery. Why again flash gingerbread ( i have it)
I tryed this but then after reboot the phone doesn't read my SIM card? any solution for this?
max_x said:
i have 100% battery. Why again flash gingerbread ( i have it)
I tryed this but then after reboot the phone doesn't read my SIM card? any solution for this?
Click to expand...
Click to collapse
If it doesn't boot flashing GB again sorts the problem out, thats GB again! It means your IMEI has lost. You need to go back to stock rom to retrieve your IMEI. Download any gingerbread stock rom from net.
Sent from my GT-I9000 using xda app-developers app
Sorry if I interrupt, but i have a quite similar problem. My SGS DOES boot though, and works okay... BUT it isn´t recognized proberly by my pc(although having all drivers installed) tried reinstalling both drivers and whole OS. Also tried other computers and cables. Phone boot fine in download and recovery mode but isn´t recognized by Odin, heimdall, oneclick etc.? My question is as following: Is it in anyway possible to grab a OTA/STOCK .zip to flash in Recovery 3e??
Thanks
rajamahbub said:
If it doesn't boot flashing GB again sorts the problem out, thats GB again! It means your IMEI has lost. You need to go back to stock rom to retrieve your IMEI. Download any gingerbread stock rom from net.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
first I do this http://www.theandroidsoul.com/downl...mware-update-galaxy-s-i9000-to-android-2-3-5/
then this http://www.theandroidsoul.com/galaxy-s-gets-official-value-pack-firmware-xxjw4-includes-touchwiz-4/
then i rooted it and install cwm like this http://www.theandroidsoul.com/xxjw4-root-and-clockworkmod-recovery-for-galaxy-s/
and then I copy slimbean 2.2 and 2.3.0 and when I'm in recovery I cant go immediately on 2.3.0 because it says than installaion is aborted so first i flash 2.2 and then 2.3.0
and stil my sim card doesn't work
max_x said:
because it says than installaion is aborted so first i flash 2.2 and then 2.3.0
and stil my sim card doesn't work
Click to expand...
Click to collapse
go here http://forum.xda-developers.com/showthread.php?t=1102881 select the latest gingerbread 2..3.6 Rom for your region than go here http://forum.xda-developers.com/showthread.php?t=1112908 flash a semaphore kernel to get root and CWM, than backup your EFS before flashing ICS (first) in CWM and than JB using CWM as per instructions on download page
xsenman said:
go here http://forum.xda-developers.com/showthread.php?t=1102881 select the latest gingerbread 2..3.6 Rom for your region than go here http://forum.xda-developers.com/showthread.php?t=1112908 flash a semaphore kernel to get root and CWM, than backup your EFS before flashing ICS (first) in CWM and than JB using CWM as per instructions on download page
Click to expand...
Click to collapse
but when i flash semaphore kernel i don't get root
When you flash from GB to ICS or jb and even fro. Ics to jb it will reboot on install then you need to go back into recovery and run the install a second time this is due to a partition change and the kernel needing to be rebooted into one compatible with those partitions so basicly flash cm9 or 10 twice for it to boot correctly
Sent via that ninja standing right behind you
Latrop said:
When you flash from GB to ICS or jb and even fro. Ics to jb it will reboot on install then you need to go back into recovery and run the install a second time this is due to a partition change and the kernel needing to be rebooted into one compatible with those partitions so basicly flash cm9 or 10 twice for it to boot correctly
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
thanks
So I tried to root my Galaxy S Advance using Odin. Everything went well until the reboot part. It's been stuck at the Samsung Galaxy S Advance logo screen for a while. What can I do ?
Thanks !
Flash the firmware again! Upgrade to jelly bean, if on gb, and use shaan's method to root.
szzlgupta said:
Flash the firmware again! Upgrade to jelly bean, if on gb, and use shaan's method to root.
Click to expand...
Click to collapse
I'm sorry! I'm new to these things. Flash the firmware again how ?
LaurMetall said:
I'm sorry! I'm new to these things. Flash the firmware again how ?
Click to expand...
Click to collapse
That root method with Odin is for Android 2.3. You tried it on 4.1.2? If yes, then download your JB firmware again and install it with Odin (like you did with that root). And use this for root: http://forum.xda-developers.com/showthread.php?t=2087424
shut_down said:
That root method with Odin is for Android 2.3. You tried it on 4.1.2? If yes, then download your JB firmware again and install it with Odin (like you did with that root). And use this for root: http://forum.xda-developers.com/showthread.php?t=2087424
Click to expand...
Click to collapse
Yes, I tried it on 4.1.2. I'm downloading the firmware now (it seems I'll have to wait a bit longer), I'll install it and I'll get back to you to tell if it worked. Thank you !
It worked ! Thanks guys ! But I have another question: shut_down the root method you showed me..will it work if my phone has never been rooted?
LaurMetall said:
It worked ! Thanks guys ! But I have another question: shut_down the root method you showed me..will it work if my phone has never been rooted?
Click to expand...
Click to collapse
Yes, it will work. That zip is signed, and it can be installed with stock recovery without root.
LaurMetall said:
It worked ! Thanks guys ! But I have another question: shut_down the root method you showed me..will it work if my phone has never been rooted?
Click to expand...
Click to collapse
Yes, that root method work on all stock Jelly Bean firmware.
Powered by CM10.2
Guys, I've encountered another problem and I thought it wasn't necessary to open another thread. So..I managed to root my phone and I would like to install a custom ROM but I have problems with Clockwork mode. I found a thread about temporary CMW for JB and I tried it but it doesn't seem to work. I installed it but when I want to navigate through it's menus (for example going to the "install zip from sd card" menu) it restarts. Even when I try to reboot my phone ("reboot system now") it doesn't work. CWM just restarts. Any thoughts ?
LaurMetall said:
Guys, I've encountered another problem and I thought it wasn't necessary to open another thread. So..I managed to root my phone and I would like to install a custom ROM but I have problems with Clockwork mode. I found a thread about temporary CMW for JB and I tried it but it doesn't seem to work. I installed it but when I want to navigate through it's menus (for example going to the "install zip from sd card" menu) it restarts. Even when I try to reboot my phone ("reboot system now") it doesn't work. CWM just restarts. Any thoughts ?
Click to expand...
Click to collapse
Install CoCore with Universal kernel flash, and use permanent cwm. You need to unzip it, and use kernel.bin.md5 and you must have some root explorer installed.
Sent from my GT-I9070 using Tapatalk
Is there any way to do this without changing the kernel ? I'm worried about bricking my phone
LaurMetall said:
Is there any way to do this without changing the kernel ? I'm worried about bricking my phone
Click to expand...
Click to collapse
No, you cannot change kernel without rooting your phone.
And rooting has a lot less risk of bricking phone.
//Just Do It.
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
s.tanbin said:
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
Click to expand...
Click to collapse
Which CWM version did you install?
mahithm said:
Which CWM version did you install?
Click to expand...
Click to collapse
5.0.26 for cooper
s.tanbin said:
5.0.26 for cooper
Click to expand...
Click to collapse
Can you tell me exactly what happens when you flash a custom rom from CWM?
s.tanbin said:
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
Click to expand...
Click to collapse
You need root permissions to mount /data partition...
1. Reboot into <Stock recovery 3e>
2. Root your device
3. Flash CWM 5.0.2.6 Fixed
4. Done!
mahithm said:
Can you tell me exactly what happens when you flash a custom rom from CWM?
Click to expand...
Click to collapse
i try to remove same use less app and tw home.. which i did lot of time before..
but suddenly it started bootloop.
then i try to cmw back the rom cmw say miss match.
then i flast stock rom via odin
at fast it didn't take properly phone auto started before the operation finish; and started to bootloop.. i flash it again then same problem ..
then i clear data then phone on but cmw can't mound data i try flash cm10 it blink.
finally after several flash and try cm9 it took cm9 and work perfect but if i go stock rom it still having data mound problem
frameworks xwkpa
Viper The Ripper said:
You need root permissions to mount /data partition...
1. Reboot into <Stock recovery 3e>
2. Root your device
3. Flash CWM 5.0.2.6 Fixed
4. Done!
Click to expand...
Click to collapse
phone is 100% rooted
and i installs that cmw as well but cmw won't mount data.
but this problem fix after flash in cm 9
s.tanbin said:
i try to remove same use less app and tw home.. which i did lot of time before..
but suddenly it started bootloop.
then i try to cmw back the rom cmw say miss match.
then i flast stock rom via odin
at fast it didn't take properly phone auto started before the operation finish; and started to bootloop.. i flash it again then same problem ..
then i clear data then phone on but cmw can't mound data i try flash cm10 it blink.
finally after several flash and try cm9 it took cm9 and work perfect but if i go stock rom it still having data mound problem
frameworks xwkpa
Click to expand...
Click to collapse
Always after flashing a STOCK rom via Odin boot into recovery and do wipw data factory reset and wipe cache partition too in order to avoid the bootloop
Don't remove the launcher you need at least one to use your phone
Your data mount problem could be solved if you flash an Android 2.3.6 Firmware
(Try with ddq8 or ktm)
Viper The Ripper said:
Always after flashing a STOCK rom via Odin boot into recovery and do wipw data factory reset and wipe cache partition too in order to avoid the bootloop
Don't remove the launcher you need at least one to use your phone
Your data mount problem could be solved if you flash an Android 2.3.6 Firmware
(Try with ddq8 or ktm)
Click to expand...
Click to collapse
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
s.tanbin said:
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
Click to expand...
Click to collapse
It will be ok
mahithm said:
It will be ok
Click to expand...
Click to collapse
ok i will give a try...
s.tanbin said:
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
Click to expand...
Click to collapse
Yeah, it should work. If you have the correct model (GT-S5830) you could use all the Firwares available for it
---------- Post added at 01:22 PM ---------- Previous post was at 01:16 PM ----------
s.tanbin said:
ok i will give a try...
Click to expand...
Click to collapse
Ok! anyway you can go back to your current firmware when you want
BTW some customs roms are based in european or indian firmwares
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
shivamgaba22 said:
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
Click to expand...
Click to collapse
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
thankyou and one more question
shut_down said:
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
Click to expand...
Click to collapse
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
shivamgaba22 said:
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
Click to expand...
Click to collapse
I did not use that version that you used. I think that you will not have a problem when you install it over stock, I explained you why you had problem when you did it over CM11.
Sent from my GT-I9070 using Tapatalk
Thanx a lot
Everything fine now with all data restored..
Once again thnx buddy
Sent from my GT-I9070 using XDA Premium 4 mobile app
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Neo2803 said:
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Click to expand...
Click to collapse
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
shut_down said:
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
Click to expand...
Click to collapse
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Neo2803 said:
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Click to expand...
Click to collapse
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
shut_down said:
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
Click to expand...
Click to collapse
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Neo2803 said:
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Click to expand...
Click to collapse
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
shut_down said:
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
Click to expand...
Click to collapse
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
My older custom ROM is http://forum.xda-developers.com/showthread.php?t=2244441 - http://d-h.st/vge
Neo2803 said:
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
Click to expand...
Click to collapse
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
shut_down said:
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
Click to expand...
Click to collapse
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
And again, if you get FAIL on Odin DO A SCREENSHOT AND POST IT HERE. To see what cause that fail. Left part of this screenshot is a log http://4.bp.blogspot.com/-gkWcapOu2...gingerbread+s5570jpq8+samsung+galaxy+Mini.jpg
Blue, where it says Message.
This is for other phone, do not pay attention on that, I just told you what I need to see.
---------- Post added at 11:28 AM ---------- Previous post was at 11:02 AM ----------
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Finally unbricked !!!
shut_down said:
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
[/COLOR]
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Click to expand...
Click to collapse
Finallyyyyyyy !!! yipppieee !!! I'm able to flash my phone with a JB Firmware. I shall be more careful in future.
http://i.imgur.com/UMv2kgs.png
http://i.imgur.com/WPP6yqs.png?1
Thanks a tonnnnn shut_down :good:: God bless you.