[Q] camera fail - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello, i have a problem with my galaxy gt i9000. i start the camera, couple sec. later it just crashes, it says "unfortunately, gallery has stopped." before that i was using android 2.3.3 then it said camera failed. but then i flashed jelly bean 4.1.1 and still crashes, do anyone knows what might help to get it working again?

mihkelramjalg said:
Hello, i have a problem with my galaxy gt i9000. i start the camera, couple sec. later it just crashes, it says "unfortunately, gallery has stopped." before that i was using android 2.3.3 then it said camera failed. but then i flashed jelly bean 4.1.1 and still crashes, do anyone knows what might help to get it working again?
Click to expand...
Click to collapse
go into the settings, app, all, gallery -----> clear cache and delete data
for safety still in recovery mode, wipe cache and dalvik.
then it should go back.

djceet said:
go into the settings, app, all, gallery -----> clear cache and delete data
for safety still in recovery mode, wipe cache and dalvik.
then it should go back.
Click to expand...
Click to collapse
Still nothing
says unfortunately gallery has stopped (

mihkelramjalg said:
Still nothing
says unfortunately gallery has stopped (
Click to expand...
Click to collapse
ok......hmmmm....
download this -----> http://goo.im/gapps/gapps-jb-20121011-signed.zip
go to recovery mode and wipe cache and dalvik.after that flash that zip.
this could help you. if not it would be better to re-install the rom after you have installed the stock rom + root kernel.

revert it to stock, re-root it, then install whatever ROM, then see, it solved it when i had that problem :fingers-crossed:

mihkelramjalg said:
Hello, i have a problem with my galaxy gt i9000. i start the camera, couple sec. later it just crashes, it says "unfortunately, gallery has stopped." before that i was using android 2.3.3 then it said camera failed. but then i flashed jelly bean 4.1.1 and still crashes, do anyone knows what might help to get it working again?
Click to expand...
Click to collapse
I see one or two possible causes of your problem:
1. Kernel more than 391MB usually breaks the 720p video and Gallery, make sure the bigmem patch of kernel is not activated.
2. Flashing directly from GB to JB usually causes post-installation problems, one of which maybe is your problem. Developers recommend a gradual ugrade of Android system to avoid any problems. From GB flash a CM9 ICS first then finally the JB Rom you wanted. In this way, you will surely get a trouble-free Rom.

smiley118118 said:
revert it to stock, re-root it, then install whatever ROM, then see, it solved it when i had that problem :fingers-crossed:
Click to expand...
Click to collapse
i dont remember the stock android and other sh*t can u tell me or post a link were i can get everything what i need to revert it stock ? tnx.

You can also try to fix permissions in CWM under "advanced".

prob.
i reverted my galaxy s gt i9000 to stock, and hoped to get camera working again but no. has still that problem, says camera failed or something like that.
well i seen some posts about copyng camera firmware, i tried that. but next problem was... that this copy failed. idk why, maybe i cant in stock ?
pls someone help me!

I think I have exactly the same problem.
It was caused by flashing Onecosmics ICSSGS RC 4.2 to CM10 Stable. (i have to admid the camera was semi broken at ICSSGS already, crashed somewhere in an hour after booting, had to reboot phone to get it running again, but well it was working...)
Camera has never worked since. (stock sammy gave me a black screen when opening the camera, making a picture just made it freeze. CM10 just gives gallery crashes upon opening. Tried nandroids, cleared cashes, tried stock sammy firmwares. I wanted to do a Samsung Kies repair, but i was unable to find stock firmware for my country...
Flashing the camera firmware might work. It didn't for me, but i have heard it could be the solution.
Can you see if you front camera is working (install instagram and make a front camera pic, will evade the gallery has crashed problem).

yea, my front camera works, i can take pictures and watch them later.
but my back camera doesnt work

maurico0o said:
I think I have exactly the same problem.
It was caused by flashing Onecosmics ICSSGS RC 4.2 to CM10 Stable. (i have to admid the camera was semi broken at ICSSGS already, crashed somewhere in an hour after booting, had to reboot phone to get it running again, but well it was working...)
Camera has never worked since. (stock sammy gave me a black screen when opening the camera, making a picture just made it freeze. CM10 just gives gallery crashes upon opening. Tried nandroids, cleared cashes, tried stock sammy firmwares. I wanted to do a Samsung Kies repair, but i was unable to find stock firmware for my country...
Flashing the camera firmware might work. It didn't for me, but i have heard it could be the solution.
Can you see if you front camera is working (install instagram and make a front camera pic, will evade the gallery has crashed problem).
Click to expand...
Click to collapse
yea, my front camera works, i can take pictures and watch them later.
but my back camera doesnt work

strange problem

Batistuta1 said:
strange problem
Click to expand...
Click to collapse
yes

still nothing
for now i tried to copy another galaxy s i9000 camera firmware and samsung wawe cam. firmware, but still that same problem... well 1 thing changed.
my galaxy s gt i9000 front camera is messing right now, i got like 6-7 me on that camera some lines are on the screen in camera :/
Well, if someone knows something what could help then please tell me!
ive tryed another roms, i been using android 2.3.6 and 4.1.1, back on stock, copyng files and messing around with that.
maybe camera is broken? i dont know what to do...

Have the same problem for a long long time.
been flashing a lotta roms kernels etc.. nothing.
I even changed the camera (I had another GT-i9000) and nothing, which makes me believe it's something of the Motherboard
Also, if I press the screen at the top half of it.. it shuts down.

I've had no back camera for a long time either. I've flashed back to eclair, tried about 4 different cam firmwares which all flashed successfully so they said, and lots of ROMs. I gave up. Im sure it must be hardware.
Seen people posting over time about the same thing. Firmwares helped a couple of people, but lots of people ended up with a dead camera. Buying a new camera unit from eBay fixes it. I think they're about £20....
Sent from my GT-I9000 using Tapatalk 2

I have exactly the same problem. Tried everything from changing many roms and kernels. Even bricked my phone for two weeks and then resurrected it using Darky's Rom Resurrection. But the camera even crashed in Darky's rom and it is still not working when I'm back to SlimRom 4.2.2 build 6. It was working all file and I cannot believe that it is a hardware issue. Please help.
YRS

same problem on my i9000. I will try with another camera from a friend's i9000.... if nothing happens probably will leave my precious

Related

[Q] Camera Fails

So, my camera fails everytime i try to take a picture!
The image appears well, the auto-focus works also nice, but when i press the button to take the picture, the image is black and a warning pops-up saying that Camera failed and then the camera app closes.
I've done some research, and i found out that some users had the same issues, but by messing with the camera firmware menu, which is not my case. The solution in these cases was to re-flash the camera firmware, copying original SGS/Samsung Wave camera firmware files to /system/firmware, and hit "Phone to CAM FW Write" @ Camera Firmware menu. Obviously, and sadly, didn't work for me.
And, in another thread, 2 users mentioned that this problem started in their phones after flashing the CF-Root-JPH-v1.1, which i also did, since my build number was FROYO.XWJPF (and JPH was the closest of JPF). The root worked damn great, but the camera now doesnt work.
And when i go to Settings->Apps->Manage Apps->All i have the camera size @ 0,00k, and the camera firmware @ 4,00k, wich i suspect are not the default and correct sizes.
So, here i am, running out of ideas. I'm aware i can send it to warranty, but looking foward to not having all that work and solving the thing by myself, if i can.
Any kind of help in this would be very appreciated!
Reflash ROM (or upgrade to a newer one like JVR or JVS)?
Well, this is the stock rom, and officially, this is the newest ROM my phone provider sent to the SGS :S
Any way to re-flash it using Kies for example?
Already tried to wipe data/cache, reboot, etc.. :S
I don't know about Kies, haven't used it for so long..
So you want to stick to stock ROM. Hmm.
Here, try copying & replacing those 4 files into /system/app using some file explorer with root support or adb push.
Those files are from the original JPF ROM.
View attachment camerafiles.rar
Well, solved!
Just re-flashed the stock official ROM (which i got using the app in this thread and everything is nice now!
Camera works, still have root. And the phone is still SIM-Unlocked.
Everything's nice
Fixed camera again by flashing CF-Root JPX
BBOXPT said:
So, my camera fails everytime i try to take a picture!
The image appears well, the auto-focus works also nice, but when i press the button to take the picture, the image is black and a warning pops-up saying that Camera failed and then the camera app closes.
And, in another thread, 2 users mentioned that this problem started in their phones after flashing the CF-Root-JPH-v1.1, which i also did, since my build number was FROYO.XWJPF (and JPH was the closest of JPF). The root worked damn great, but the camera now doesnt work.
Click to expand...
Click to collapse
Same happened to me recently (though my "stock" build number before was actually JPH as well, so it should have been a perfect fit).
Front camera and video recording was still fine, but trying to actually take a picture with the main back camera results in failure after flashing CF-Root JPH, as you describe.
Anyways, I just flashed the more recent CF-Root-...JPX, and all was well again.
JPY would not even boot, btw, so the latest that would boot was JPX,
and it fixed it.
I never find a solution to my camera Samsung galaxy SI9000M
My camera on samsung galaxy s I9000M (Bell north american version)
My phone is out off warranty.
Since I upgrade the phone from froyo 2.2 the camera work only on video mode.
I tried all the new firmwares gingerbread from 2.3.3 till 2.3.6, I tried custom ROM, nowhere, the same problem...I change the camera firmware as explained in threads from many forums, using root and file manager,change files in system/firmware...no thing again.
I rewrite the files with samsung wave files...nothing again
As soon as I return back to froyo the camera start working again perfectly
I return to froyo and update the phone to official gingerbread 2.3.3 UGKG3 with Kies, the uodate done succussefully but the camera crash again showing the same message Camera Failed
I install Camera zoom FX, didn't work until I set it to Infinity focus...than start working.
But the Autofocus on original camera is a default value we can not change.
I played with the setting of the camear different ways and the problem is still there.
Any issues please

[Q] Random dialer crash. help!

Hi, I have rooted 2.3.6 (I9000XXJVT). There is random problem with dialer. It's crashing when I start dialing number and just back to home screen without warning. Any help? PS. The same was with older version of android. THANKS!
i have this issue to
does anybody know the solution if not i think i might have to reflash via odin
Have you tested to see if the proximity or light sensors are faulty as i had similar crash problems force closes and just returning to the home screen and it is my proximity sensor not working and when you try to make the call and the phone dont do what the cpu is saying that's not right it just gives up
sent by looney on his galaxy gti9000 via xda app u no u gotta love the droid
sumsy2011 said:
does anybody know the solution if not i think i might have to reflash via odin
Click to expand...
Click to collapse
reflash giving nothing... Still the same...
Try this:http://www.mediafire.com/?h9n6e4qwagaln3f
Copy two files in system /app and then reboot.
your rom ust be rooted and deoxeded
First of all, @OP and followers:
I think that you have force close error on com.android.phone, right?
Second, for the helpful guy: the solution depends: there are two version of fix, for odexed and deodexed phone, both available After magic button: SEARCH use
no FC's just exits i tried wipe data thrum titanium backup but it works for a short time. it is really annoying and it happened to me since jvq i think and now i am on jw1
gigeaky said:
no FC's just exits i tried wipe data thrum titanium backup but it works for a short time. it is really annoying and it happened to me since jvq i think and now i am on jw1
Click to expand...
Click to collapse
same here...
and this stops you from trying the solution provided above? OK guys, so please wait. I hope that within 12 months someone will look for it specifically, as you do not want to replace phone.apk.
I've just installed I9000XXJVU|2.3.6|OXA| and problem seems to be solved: http://forum.xda-developers.com/showthread.php?t=1431596
i have same problem so looking for a different rom.
was on jvu 2.3.6
i had same problem with jetpack v9 flashed darky 10.4.2 running smooth also has a phone fix in darky ota app dialer working great no probs whatso ever

Stability problem

Hello, I'm using Semaphore + CM10 JB for few weeks (installed with your support).
However I have a problem. The stability. My phone likes to resets byself, even few times per day. It happens irregularly. What's interesting, sometimes phone resets to the CWM. Sometimes resets and backs to work, sometimes totally offs the phone (and i need to pull out the battery) or freeze on cyanogenmod start screen (but not on normal start, only when resets)
Sometimes it happens when i'm using the phone, sometimes not. He likes to do that when i'm sleeping (for example, goes to the CWM and discharge the battery by whole night on full bright).
And much smaller, but maybe important issue: when the phone starts, shows the message Warning! A problem was detected with your device. Your device IMEI number is invalid. And invalid IMEI number could cause network issues including the inability to call emergency numbers.
Firstly I installed CM10, i had the problems with the network, but after @xsenman's help (reinstall with older ROM before flashing CM10) everything works correctly and i can see IMEI too. I made an EFS backup in that old ROM, should i use that? This message doesn't intrude me, but i'm just thinking if this could be connected with reseting problems. My SGS works really nice, but that one issue is really annoying.
100 views and really no one can help?
Come on, i feel so lonely
I'd recommend flashing a clean GB stock, restoring your IMEI, flashing CM9 twice and then flashing CM10 ROMs (if you want them lol). Always be sure that you wipe your phone after installs.
Sent from my Gameboy Color
thanks for your answer. However, maybe it's not a ROM problem? Maybe some application makes an issue. Is there any log where i can check that?
That IMEI stuff definitely isn't app-caused. I can only repeat my statement above. Don't worry about data, you can backup everything using Titanium Backup and SMS Backup+.
Btw: What ROM are you on?
Best regards
Sent from my Gameboy Color
True, IMEI not, but it's not a real issue for me. Actually, i'm absolutely satisfied of my i9000 (maybe flashlight absence, but it's hardware). Everything works fine, but reseting problem makes me nervous when I use the phone as car dvr or for endomondo ect.
I use Cyanogenmod 10, one of october's nightly versions.
So basically you don't want to change anything but you want us to help you? Sorry, that's not the way a community works.
You didn't understand me. My problem is phone reseting. I want to find the reason of the issue. Because without it, i can install new software and still have the same problem.
przemek211 said:
You didn't understand me. My problem is phone reseting. I want to find the reason of the issue. Because without it, i can install new software and still have the same problem.
Click to expand...
Click to collapse
Since when has this problem occurred? I doubt an app makes a phone reset itself.
Edit: I looked around your post history and you seem to have posted in the semaphore thread. Maybe something is wrong with the kernel?
Sent from my GT-I9000
Thanks for your answer. It's hard to say because I've flash a ROM and out of hand I installed the applications. It's the worst type of problems, because it doesn't happen instantly or regularly. Actually since i wrote the topic, i didn't see the problem, however i saw two-three times the attention about IMEI, so i think, the phone resets, but not seen.
/// amerkiller: you are using i9000 too, could you recommend me any other ROM? Probably I will need to install a ROM and wait, two-three days and check if the ROM makes any issues.
/// maybe, but how can i check it? It looks like work nice, my question in Semaphore's thread was about the features
I use Remics-JB, you can try it out if you want a Samsung touchwiz feel, and apps from the S3.
Slimbean if you want a minimalist ROM.
Hopefully, the problem will disappear.
Powodzenia
Edit: regarding the kernel, you can flash Devil and see if the problem persists.
Sent from my GT-I9000
So I will try Devil + Slimbean, thank you
amerkiller1995 said:
Powodzenia
Click to expand...
Click to collapse
Poles everywhere?
pozdrawiam
BlueFlame4 said:
I'd recommend flashing a clean GB stock, restoring your IMEI, flashing CM9 twice and then flashing CM10 ROMs (if you want them lol). Always be sure that you wipe your phone after installs.
Sent from my Gameboy Color
Click to expand...
Click to collapse
Ok, so i want to reflash my i9000. So - i have JVU's gingerbread ROM, is that correct stock ROM? Should i make the WIPE here? I'm not sure about restoring IMEI. Should i do that in GB's temporary ROM or (as I think) later in JB's? Of course, earlier I need to backup the efs folder with IMEI so i think i should do that in GB's and restore it in CM10 (or in Slimbean which I want to test). And one more doubt. You said flashing CM9 twice. Why is that? And how can I do that if i'm installing the ROM in CWM?
przemek211 said:
Ok, so i want to reflash my i9000. So - i have JVU's gingerbread ROM, is that correct stock ROM? Should i make the WIPE here? I'm not sure about restoring IMEI. Should i do that in GB's temporary ROM or (as I think) later in JB's? Of course, earlier I need to backup the efs folder with IMEI so i think i should do that in GB's and restore it in CM10 (or in Slimbean which I want to test). And one more doubt. You said flashing CM9 twice. Why is that? And how can I do that if i'm installing the ROM in CWM?
Click to expand...
Click to collapse
You can find tutorials about flashing to stock.
http://forum.xda-developers.com/showthread.php?t=1102881
Flashing the stock ROM will recover your IMEI number if you currently don't have it and will wipe your personal files. Backup your IMEI while you're on GB and if you lose it, then restore it. Fyi I never lost my IMEI, it's not common. You should flash JB / cm10 twice, ICS/cm9 should be okay after one flash. Remember to wipe if the instructions say so.
When you'll attempt to flash cm10 in recovery, you'll get a warning about partition change. You'll have to chose to flash second time, this time it should work and the phone will reboot into a bootloop. Pull out the battery and enter recovery and flash cm10 again. This time it well install and reboot successfully.
Sent from my GT-I9000
It's everything working nicely? Asking out of curiosity.
Sent from my GT-I9000
Hi, thanks for your interest
Two days ago I made a re-flash Stock > CWM > CM9 (twice) > CM10
Attention about IMEI doesn't longer appear
I've installed apps. The phone has resets for a one time when I was using some app. It is not a big problem for me if SGS makes that from time to time (maybe some apps are not adapted to the JB very well). However today I used him to record my drive (dailyroads voyager) and when i tried to stop the recording, he doesn't backs to life (just I needed to pull the battery out) and video file was corrupted. But when I was getting back to home it worked correctly. I have no idea why that's happen.
przemek211 said:
Hi, thanks for your interest
Two days ago I made a re-flash Stock > CWM > CM9 (twice) > CM10
Attention about IMEI doesn't longer appear
I've installed apps. The phone has resets for a one time when I was using some app. It is not a big problem for me if SGS makes that from time to time (maybe some apps are not adapted to the JB very well). However today I used him to record my drive (dailyroads voyager) and when i tried to stop the recording, he doesn't backs to life (just I needed to pull the battery out) and video file was corrupted. But when I was getting back to home it worked correctly. I have no idea why that's happen.
Click to expand...
Click to collapse
Restarts shouldn't happen that was some unusual circumstance. The video problem is weird, post here if it happens again, lets hope its just bad luck.
Ok, I'll look on it.
I have one other question and maybe you will know.
Call recording. There are two options for use this feature. Simple MIC recording apps and 'two-way call recording' which is much better, however it needs kernel with handle of it. I didn't find anyone for SGS, so I want to use MIC recording. There are many apps in Google Play. However any of them makes 0kB files of record on JB's CM10. When I was using gingerbread it didn't worked too however files were good, but the second side of call didn't hear me.
przemek211 said:
Ok, I'll look on it.
I have one other question and maybe you will know.
Call recording. There are two options for use this feature. Simple MIC recording apps and 'two-way call recording' which is much better, however it needs kernel with handle of it. I didn't find anyone for SGS, so I want to use MIC recording. There are many apps in Google Play. However any of them makes 0kB files of record on JB's CM10. When I was using gingerbread it didn't worked too however files were good, but the second side of call didn't hear me.
Click to expand...
Click to collapse
In regards to two way recording, i don't think it's solved...
http://forum.xda-developers.com/showthread.php?t=863074&page=38
I never needed that feature, so i won't be much help, try different apps and remember some apps are on XDA, not only the play store.
Sent from my GT-I9000
I saw that, but it is only for Froyo, when i installed it into gingerbread i needed to re-flash my SGS
I tried a lot of apps, however it looks like being locked (if worked they made 0kB files)

Camera black, broken software.

Hello fellow xda members,
Today I was flashing my i9000 from android 4.0.4 (team ICSSGS) To CM10. Camera was not working too well at the 4.0.4, (this was the main reason to flash to CM10.
After flashing CM10 it gave immediate "camera not responding" messages when opening the camera. So then i flashed back to android 2.3.5 XXJVT. Here the camera was actually booting, but it was only giving a black screen. Making pictures would crash it. The front camera, however, does work normally.
After that i tried a CWM backup to an very old samsung rom. This didn't restore it either...
Next up a manual restore of the camera firmware:
http://forum.xda-developers.com/showthread.php?t=829482&page=3
The problem is that the 4th file was to big to copy/paste to the folder >.> Which resulted in nothing either :C
My question is: Is there anybody out here who wants to donate the /system/firmware folder?
it contains 4 files:
CE147F00.bin
CE147F01.bin
CE147F02.bin
CE147F03.bin
I want to try to restore it with the real files, it might work .
Well if anybody here knows a solution, please please please feel free to help!
Mauric

I9305 Stock - Hangs,turns off and all media related things crashes....help please!!!!

Hello everyone, Thank you for taking your time to look at thi and sorry for my bad english.
I have used my I9305 for 4 months until now without any fault. It was on official 4.1.2 XXBME3 stock rom with stock kernel but rooted, Philz Touch recovery. I have flashed PAC and Sentinel Rom before(2 months ago I think) but didnt stay on them as they had bugs to use as a daily driver. So it was on always stock.
And now, from 4 days ago, phone began to get laggy and everything suddenly force closes. Even though it had 2gb ram, dolphin browser get closes if i pressed home button. and after a day, it began to drain battery even in sleep and then after display time out, it goes to sleep and then turns off itself and battery gets very hot in that state. And I noticed that sound not coming out from speaker when ringing or I cant open music player or video player or voice recorder as the phone hangs and then reboots and after boot up, again reboots in like within 5 minute intervals.
So here What I tried,
1. Flashed stock from samsung updates firmware sites via ODIN 1.85. And yes I wiped everything before rom flash incl. Cache,Dalvik Cache, Data,SD card, System and everything except EFS partition as listed in philz recovery.
Result - Still no luck, reboots randomely, battery getting hot, music player video player crashes(video player doesn;t crash but when tried to play video it says cant play this video)
2. Again Rooted, installed TWRP and wiped Everything I could find and flashed stock again.(When wiping, TWRP fails to wipe data where it says type yes to wipe saying failed to format....unknown format and failed to remove encryption)
Result - Same again.
3. Flashed stock again without wiping. Result - Same.
4. Rooted, installed recovery, wiped everything and flashed PAC latest nightlies. stll same. Then flashed sentinel but same.
5. After trying 5 6 times flashing stock, I gave up and now its on Stock 4.1.2 BME3 and removed binary counter and ready to go for warranty claim.
But I still will to make this myself as it will take 2 weeks to get back to me if I give it to the retailer. So can you please help me guys. Thank you again.
Faqs and guides return to stock for warranty post and return to service .
Or just mess about for weeks and achieve nothing .
Thank you,
Yes, its returned to stock as mentioned. But may I know what cause this? cuz I use a S2 for years now and nothing wrong with it. So I think I know how to properly use android. I searched a lot. but sees lot of people complaining but no solution.
suspect008 said:
Thank you,
Yes, its returned to stock as mentioned. But may I know what cause this? cuz I use a S2 for years now and nothing wrong with it. So I think I know how to properly use android. I searched a lot. but sees lot of people complaining but no solution.
Click to expand...
Click to collapse
Ask a service centre read the faqs and guides .
JJEgan said:
Ask a service centre read the faqs and guides .
Click to expand...
Click to collapse
Yeah, I suppose. Thanks for the reply.

Categories

Resources