Related
ok, so i tried to get help in the actual froyo 2.2.13 install thread but i'm not getting an answer.
i downloaded, installed, and it said it was successful.. i rebooted, went into the settings to see if it changed, and it still said 2.2.9. i tried to do it again and now my phone will not reboot into recovery using droid x bootstrap or rom manager... won't even go into it if i do it manually... i tried to uninstall bootstrap and rom manager and reinstalling, no luck. please help.
brandon2x said:
ok, so i tried to get help in the actual froyo 2.2.13 install thread but i'm not getting an answer.
i downloaded, installed, and it said it was successful.. i rebooted, went into the settings to see if it changed, and it still said 2.2.9. i tried to do it again and now my phone will not reboot into recovery using droid x bootstrap or rom manager... won't even go into it if i do it manually... i tried to uninstall bootstrap and rom manager and reinstalling, no luck. please help.
Click to expand...
Click to collapse
Try these comands from :
AllDroid Public Board»Motorola»Droid X Forums»Droid X Rooting»How to get 2.2, Rooted, on your Droid X
under:
If you have /system/xbin/su and /system/app/Superuser.apk, but cannot use "Superuser" (no prompts from Superuser app, "permission denied" when you try to run "su"), just do the following:
Run "adb shell"
Run "/system/xbin/su"
Watch your screen for Superuser app to prompt for permission and click "allow"
Run "mount -o remount,rw /dev/block/system /system"
Run "cp /system/xbin/su /system/bin/su"
Run "chmod 4755 /system/bin/su"
Open the SuperUser application on the phone (app launcher) and make sure that "superuser" isn't listed and denied. If so, "forget it" and return to step 2. If you can't find SuperUser, it's not installed and you should download from this posts attachments and "adb install Superuser.apk"
[optional] Run "mount -o remount,ro /dev/block/system /system"
This should help you get your su working again.
not sure on your process so if you still do not have the .13 I would go back to your process and see what you are missing. I rebooted into recovery from bootstrap when I installed mine. Then I had to do the above commands to get my su back.
If you still don't have it, try the FULL instructions from here:
MDW Presents: Droid X 2.3.13 - The Froyo Upgrade
read through it and see if #5 from step 2 pertains to you.
The biggest thing to remember is to mount before you select the file to load on your sd card.
This thread:
Motorola Droid 2Droid 2 Android DevelopmentHow to root the Droid 2
will also be helpful regarding root if you have further questions.
Hope this helps.
My su is working fine. Nothing is being denied when I open it. Just cannot get to recovery with any option... im lost...
Sent from my DROIDX using XDA App
Maybe just double check through adb shell even if you are not having su issues?
Run "adb shell"
Run "/system/xbin/su"
Watch your screen for Superuser app to prompt for permission and click "allow" (I never saw any request)
Run "mount -o remount,rw /dev/block/system /system"
Run "cp /system/xbin/su /system/bin/su"
Run "chmod 4755 /system/bin/su"
I had similar issues of nothing being denied after a successful install and had to do the su commands. It helped me to reboot into recovery afterwards.
Sent from my DROIDX, Froyo FTW. Obsidian?
Ok im still learning.... how do I "run adb shell" and do these commands you're telling me...
Sent from my DROIDX using XDA App
brandon2x said:
Ok im still learning.... how do I "run adb shell" and do these commands you're telling me...
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I saw your post in the other thread. The best thing you can do is go through the links I gave you. Start with the root thread and click the more directions link in it. read through the processes and make sure you download all files and also understand what sbf is. Once you have all of the tools to do root and load whatever leak or rom you want you should be set. Understanding what is going on is key. This is a decision you are making to alter your phone for your benefit. Take the time to download SDK and whatever else is needed for your computer. Become familiar with what shell is and how to get there as well as explore within it. If you can get shell down and how to access your su and run commands, you should know enough to start. There are many things you need to research in order to be confident in what you are doing. I am sure you will not have a problem, just putting the time in to figure out everything is key. This is what I had to do.
I think that this is the best advice I can give you. None of us can know exactly what you are doing so you need to know the processes and choose which one is going to work for your circumstance. Good luck and if you have anymore problems I am sure all of us on xda can figure out a solution for you.
ok, finally, with a little help i got my phone rerooted and back to normal. learned a lot in the process too. thanks to all...
Okay, so this is a doozy. I recently got a Droid3 to replace my original Droid. I've had it for less than 3 months. Its been rooted using Pete's One Click Root for this entire time without any issues.
Last week the following symptoms manifested:
1) Most applications, including system applications, force close constantly.
2) I'm usually unable to run any applications, including the Market.
3) What applications are having issues is not consistent.
4) The phone will reboot itself randomly, sometimes constantly.
5) Sometimes after a reboot it gives me no service and has the "Touch Android to begin" screen again. The phone is completely unusable when it does this, and the only fix is to pull the battery and then its back to its previous state.
5) Any changes made to the phone do not survive a reboot.
This last one is the real kicker. I can go through, uninstall every application I've ever downloaded but if you restart the phone or it restarts itself they will all return. This goes for everything on my Internal Storage. The SDCard seems unaffected...
I tried the SBF trick here from rootzwiki. (can't link since I'm new)
This did not work. How it failed might be important:
1) The primary method (psouza4's) acts like its successful but doesn't actually do anything.
2) RSDLite method will fail in step 3 (mbmloader.bin) every time, no matter what fastboot file I try to use.
3) After doing RSDLite I had the "flashboot flash failed" error and the phone was unusable. I then tried psouza4's method again and my phone has reverted to the same broken state it was in when I started.
So I'm not at all sure what I can do here. Since the bootloader isn't cracked yet I have no means to load another ROM. The only method I can find for Droid3 is through a Marketplace app that, on the rare instances I can install it, force closes immediately!
Any advice or ideas at all would be nice.
As for what started this, only two things happened out of the normal phone usage:
1) My girlfriend tried to text me a picture for the first time (of some chairs she wanted to buy for those curious/suggestive ) which never got to me initially but when it finally did after the 4th attempt I was never able to download the image.
2) I put a PDF file on the Internal Storage. Its one I've had for years and its just some manual I needed mobile and I don't have a laptop. Confirmed its malware free as far as any software can tell.
Working theory is I unplugged my phone from the USB too quickly after uploading the file but I don't know for sure. Nothing else was done unless Verizon had a OTA update that would break a rooted phone (guessing not since no one else seems to have this issue anywhere).
Again, any help someone can provide would be excellent. I'm going to have to load up my broken Droid in the mean time. Keyboard doesn't work and the touchscreen is failing but it can take calls more reliably than my Droid3 currently!
Cowmonaut said:
Okay, so this is a doozy. I recently got a Droid3 to replace my original Droid. I've had it for less than 3 months. Its been rooted using Pete's One Click Root for this entire time without any issues.
Last week the following symptoms manifested:
1) Most applications, including system applications, force close constantly.
2) I'm usually unable to run any applications, including the Market.
3) What applications are having issues is not consistent.
4) The phone will reboot itself randomly, sometimes constantly.
5) Sometimes after a reboot it gives me no service and has the "Touch Android to begin" screen again. The phone is completely unusable when it does this, and the only fix is to pull the battery and then its back to its previous state.
5) Any changes made to the phone do not survive a reboot.
This last one is the real kicker. I can go through, uninstall every application I've ever downloaded but if you restart the phone or it restarts itself they will all return. This goes for everything on my Internal Storage. The SDCard seems unaffected...
I tried the SBF trick here from rootzwiki. (can't link since I'm new)
This did not work. How it failed might be important:
1) The primary method (psouza4's) acts like its successful but doesn't actually do anything.
2) RSDLite method will fail in step 3 (mbmloader.bin) every time, no matter what fastboot file I try to use.
3) After doing RSDLite I had the "flashboot flash failed" error and the phone was unusable. I then tried psouza4's method again and my phone has reverted to the same broken state it was in when I started.
So I'm not at all sure what I can do here. Since the bootloader isn't cracked yet I have no means to load another ROM. The only method I can find for Droid3 is through a Marketplace app that, on the rare instances I can install it, force closes immediately!
Any advice or ideas at all would be nice.
As for what started this, only two things happened out of the normal phone usage:
1) My girlfriend tried to text me a picture for the first time (of some chairs she wanted to buy for those curious/suggestive ) which never got to me initially but when it finally did after the 4th attempt I was never able to download the image.
2) I put a PDF file on the Internal Storage. Its one I've had for years and its just some manual I needed mobile and I don't have a laptop. Confirmed its malware free as far as any software can tell.
Working theory is I unplugged my phone from the USB too quickly after uploading the file but I don't know for sure. Nothing else was done unless Verizon had a OTA update that would break a rooted phone (guessing not since no one else seems to have this issue anywhere).
Again, any help someone can provide would be excellent. I'm going to have to load up my broken Droid in the mean time. Keyboard doesn't work and the touchscreen is failing but it can take calls more reliably than my Droid3 currently!
Click to expand...
Click to collapse
I can say a couple words to describe my reaction.. OH ****. Your phone seems to have too many problems to be software related. Try to flash back to stock 5.6.890 and get a new phone.
Sent from my DROID3 using XDA App
Hmm, I guess for the mean time I'll just have to keep trying to get the Marketplace ROM Manager to install and launch. Should be a way to install straight to the SDCard that doesn't have problems.
Thinking it over, my Internal Storage may just have a bad sector... Yeesh.
Have you tried formatting /system in mounts and storage in CWM? Then reinstalling a fresh rom on top?
Sent from my DROID3 using xda premium
Negative. I didn't have CWM installed (stock ROM just rooted for certain apps) and apps are usually crashing now.
I'll give that a shot though. Sometimes I can use an app so maybe if I'm persistent...
and to verify, you are using the verizon droid 3 xt862? Are you on 5.5.959 or 5.6.890 (or possibly 5.7.894)?
Yea can't get any new apps to run. Interestingly, the camera app seems to crash the OS at the moment.
I think I'm going to have to try to RMA...
MrJudylicious said:
and to verify, you are using the verizon droid 3 xt862? Are you on 5.5.959 or 5.6.890 (or possibly 5.7.894)?
Click to expand...
Click to collapse
Its running 5.6.890. Unless I'm mistaken its the xt862. I've only had it since September.
well as long as root isnt showing and the /system hasnt been changed from stock rom, it should work. i do find it bad that rsd didnt work. i wonder if you were trying to flash the .959 sbf on your .890 system? I would def try again to sbf and wipe data/cache through stock recovery after that using volume buttons (android!)
Well, that's kind of the problem. Changes don't survive a reboot so i haven't been able to unroot the phone. I double checked and the file was the .890 flashboot. Wiping data/cache literally does nothing.
Is there a way to format this offline, from a PC? Going to try some more Google searches...
wiping data/cache should erase all of your saved data and force you to *228. Make sure USB debugging is on, set usb to Charge Only, try petes motorola tools to unroot but using RSD 5.5 fastboot .890 found http://forum.xda-developers.com/showthread.php?t=1255198
MrJudylicious said:
wiping data/cache should erase all of your saved data and force you to *228. Make sure USB debugging is on, set usb to Charge Only, try petes motorola tools to unroot but using RSD 5.5 fastboot .890 found http://forum.xda-developers.com/showthread.php?t=1255198
Click to expand...
Click to collapse
1) How do you unroot with Pete's motorola tools? Is it a different version than the one click root? Cause that's how I rooted my phone in the first place but it doesn't seem to have an option to unroot...
2) The link for the flashboot file gives a 404 error. The attached .RAR only has the .XML file.
Any place else I can get that version?
just enter stock recovery by holding down the x key on the keyboard when you boot up and wipe data
Edit: srry didnt read the full post
jellydroid13 said:
just enter stock recovery by holding down the x key on the keyboard when you boot up and wipe data
Click to expand...
Click to collapse
If you read the original post, that doesn't work.
Okay so I had an outdated version of Pete's tools which is why I didn't see the unroot option. Mine is the older one that was a batch file, not a application.
Got that sorted out and it still doesn't work. Seems I may have some permissions issues:
Code:
> su
> /system/xbin/su
> mount -o remount,rw /dev/block/mtdblock3 /system
> if [ -e /data/local/12m.bak ];
> then
> rm /data/local/12m.bak
> fi
> exit
> exit
[email protected]_solana:/$ su
exit
exit
exit
Permission denied
sh[email protected]_solana:/$ /system/xbin/su
Permission denied
[email protected]_solana:/$ mount -o remount,rw /dev/block/mtdblock3 /system
mount: Operation not permitted
[email protected]_solana:/$ if [ -e /data/local/12m.bak ];
> then
> rm /data/local/12m.bak
> fi
[email protected]_solana:/$ exit
(success)
That's part of the ADB log. There are a lot of other permission denied messages, which is a little comforting. The only thing I could think of that happened is permissions didn't get set right when Internal Storage was unmounted from my PC.
Since I can use ADB to access the shell, how can I format /system on the droid3? I can't seem to find the correct root name to use.
Cowmonaut said:
Okay so I had an outdated version of Pete's tools which is why I didn't see the unroot option. Mine is the older one that was a batch file, not a application.
Got that sorted out and it still doesn't work. Seems I may have some permissions issues:
Code:
> su
> /system/xbin/su
> mount -o remount,rw /dev/block/mtdblock3 /system
> if [ -e /data/local/12m.bak ];
> then
> rm /data/local/12m.bak
> fi
> exit
> exit
[email protected]_solana:/$ su
exit
exit
exit
Permission denied
[email protected]_solana:/$ /system/xbin/su
Permission denied
[email protected]_solana:/$ mount -o remount,rw /dev/block/mtdblock3 /system
mount: Operation not permitted
[email protected]_solana:/$ if [ -e /data/local/12m.bak ];
> then
> rm /data/local/12m.bak
> fi
[email protected]_solana:/$ exit
(success)
That's part of the ADB log. There are a lot of other permission denied messages, which is a little comforting. The only thing I could think of that happened is permissions didn't get set right when Internal Storage was unmounted from my PC.
Since I can use ADB to access the shell, how can I format /system on the droid3? I can't seem to find the correct root name to use.
Click to expand...
Click to collapse
Have you tried to root manually? Here are the original instructions vulnfactory.org/blog/2011/08/25/rooting-the-droid-3/
[edit] I guess I miss read that you are trying to unroot.
try http://rootzwiki.com/topic/4370-sbf-droid-3-fastboot-files-55959-and-56890/ but you cant go from .890 back to .959! no idea about mounting, sorry.
MrJudylicious said:
try http://rootzwiki.com/topic/4370-sbf-droid-3-fastboot-files-55959-and-56890/ but you cant go from .890 back to .959! no idea about mounting, sorry.
Click to expand...
Click to collapse
That's the reference to Rootzwiki I made in the original post, doesn't work sorry.
Using ADB I mounted /system as rw and tried to manually remove certain apps. Once I re-mounted they were there again. So something is preventing me from making real changes to the Internal Storage.
Cowmonaut said:
That's the reference to Rootzwiki I made in the original post, doesn't work sorry.
Using ADB I mounted /system as rw and tried to manually remove certain apps. Once I re-mounted they were there again. So something is preventing me from making real changes to the Internal Storage.
Click to expand...
Click to collapse
You don't have superuser permissions.. In the ADB shell your command line should start with a # indicating superuser permissions.. you have a $
ChaoticWeaponry said:
You don't have superuser permissions.. In the ADB shell your command line should start with a # indicating superuser permissions.. you have a $
Click to expand...
Click to collapse
Where do you get that idea?
When I do this manually:
1) I'm running the command prompt as Administrator
2)I'm launching into adb using the command "adb shell".
3) First thing I do is type in "su"
4) second thing I do is approve "unknown" in the superuser app on account of it never remembering I already did that.
5) I use the command "mount -o rw,remount -t yaffs2 /dev/block/mtdblock4 /system"
6) I use the "ls" command on /system/app and find an .apk to uninstall (not all my apps seem to be installed in this location either...)
7) I use the "pm list packages" command to find the rest of the files for that .apk
8) I use "rm <filename>.apk" followed by "pm uninstall <whatever that developer chose to name things>" command to fully uninstall.
I should note on my phone at this point it disappear from the application list.
9) I use the command "mount -o ro,remount -t yaffs2 /dev/block/mtdblock4 /system"
10) I use the "ls" command on /system/app to confirm and voila, the apk file is back!
The app doesn't show up in my app manager until I reboot the phone. Changes to /system and /data are not persisting and I have no idea why.
I can't seem to unmount them either so I can't format via ADB...
I claim no credit for this but after the 893 OTA you wont have root and you will have to go this way to get it back.
Original post I robbed this from [HERE]
You will need adb to do this. You can get the download here depending on your operating system. ADB
Download the follow file: it contains the exploit, su, Superuser
Download exploit -->Exploit.zip
1) Unzip contents of folder to your Desktop
2) open a command terminal and navigate to the folder (cd Desktop/Exploit)
3) type the following commands
---> adb push zerg /data/local
---> adb push su /data/local
---> adb push Superuser.apk /data/local
---> adb shell
---> cd /data/local
---> chmod 777 zerg
---> ./zerg
4) Wait for the root to be gained
5) type the following commands
---> adb shell (only type this if you are no longer in [email protected])
---> mount -o rw,remount /dev/null /system
---> cat /data/local/su > /system/bin/su
---> cat /data/local/Superuser.apk > /system/app/Superuser.apk
---> chmod 4755 /system/bin/su
---> chmod 4755 /system/app/Superuser.apk
---> reboot
This is from P3Droid.
Click to expand...
Click to collapse
Worked like a charm. Thanks!
want to do this for my brother, you just connect the phone to the computer with usb debugging mode enabled right?
Fyi if you correctly root and forever root prior to the ota you will retain root. The update does not remove root if it was forever rooted.
Sent from my DROID BIONIC using XDA App
I used this method on a used Bionic I bought that has 5.7.893. It worked perfectly.
Why do you guys make it so difficult? All you need to do is use R3L3AS3DRoot to restore, root, and forever root your Bionic. And, POW! You will have a rooted Bionic once again, without D/L unnecessary software and typing commands. Props to DHacker.
charlie310 said:
Why do you guys make it so difficult? All you need to do is use R3L3AS3DRoot to restore, root, and forever root your Bionic. And, POW! You will have a rooted Bionic once again, without D/L unnecessary software and typing commands. Props to DHacker.
Click to expand...
Click to collapse
Because R3L3AS3DRoot restores a 886 system and not an 893 system, which is the reason you would "D/L unnecessary software."
So, sure you'll be rooted with an 886 system which isn't current.
you forgot last step....then update and youll still have forever root
I restored and forever rooted my bionic, then did OTA, and still have root. I was on rooted stock previously, but restored because I wasn't able to get or pull the OTA update due to "error try again later".
Sent from my DROID BIONIC using Tapatalk
Terror_1 said:
Because R3L3AS3DRoot restores a 886 system and not an 893 system, which is the reason you would "D/L unnecessary software."
So, sure you'll be rooted with an 886 system which isn't current.
Click to expand...
Click to collapse
Let's think about this logically:
D/L and unzip R3L3AS3DRoot and use 3 clicks to restore/forever root your phone, then D/L the update using a 3 clicks.
Or, D/L and install ADB, D/L and install Java SE, and D/L & unzip the Exploit Zip and type in 15 command lines to root your phone.
It's pretty obvious what is considered easier and requires less unnecessary software.
BTW, if you are flashing a ROM, then option 1 is always the best way to go since you don't have to D/L the OTA update since most ROMs have the update built in (and you already have the updated radio).
getting replacement bionic for radio issues tomorrow hopefully. will i have to use this most likely or will it unrootable? any info would be great thanks!
charlie310 said:
D/L and unzip R3L3AS3DRoot and use 3 clicks to restore/forever root your phone, then D/L the update using a 3 clicks.
It's pretty obvious what is considered easier and requires less unnecessary software.
Click to expand...
Click to collapse
You forget that some of us already have all the prerequisites. I personally can't say if your method works or not. It failed several times for me, so I gave up and zerg worked.
luke1333 said:
getting replacement bionic for radio issues tomorrow hopefully. will i have to use this most likely or will it unrootable? any info would be great thanks!
Click to expand...
Click to collapse
I am partial to doing things manually myself but I guess 43v3r does it too.
I personally had no luck with it.
Sent from my DROID BIONIC using XDA App
what version could you not root?
Does zerg work on 5.9.901 ?
luke1333 said:
what version could you not root?
Click to expand...
Click to collapse
893 43v3r doesn't work on, if you restore the 886 then root you should be fine. Just doing the update then trying to gain root isn't going to work.
kris7778 said:
Does zerg work on 5.9.901 ?
Click to expand...
Click to collapse
I don't know for sure but I am pretty confident that it would.
THANKS!
Flawless victory!
Binarality!
Has anyone rooted a previously unrooted device running version 5.9.901? Who's process?
This method worked for me, but I notice that my 3g service was weak and my 4g was gone. Even if i restarted the phone I couldn't get my 4g to work. This was after the 4g issue with VW braking it. Has anyone else had this problem?
1 click method
is there any 1 click method out there that can be used to do this ,,i used 4ever root a couple of time to restore my phone after screwing it up .. but now even that wont work .. so yeah i have the update but no root ...no matter how i try to do it before or after ..
and i unfortunately do not know how to connect to adb to push anything to my phone .. im not that technical with it ....dont have a clue .ive tried but not easy for me that is thanking you in advance Robb
One question, if I update and then for any reason I can't get root can I go back to stock rom you know the one before ota and start over? ???
Sorry for my english lol
Sent from my DROID BIONIC using XDA App
Hi, everybody!
Several days ago i've got OTA update from VERIZON. You can download it from attach.
Changelog from official Motorola site
I agreed and installed this update. After it i had 98.72.18-8 SW version.
So, i have had the trouble: i couldn't got root rights by Dan Rosenberg exploit - Motorola fixed the way, we had root on previous JB 98.72.18 and 98.72.18-2 !
After analysing install-script file from OTA update and thinking around it i decided to downgrade with RSDLite to 98.72.18 and do some manipulations with SU binary:
Start point: 98.72.18-2 installed, rooted
Code:
adb kill-server
adb start-server
sleep 5
adb shell su -c "mount -o remount,rw /system"
adb shell su -c "cd /system/bin/ && mv run-as run-as2 && mv /system/xbin/su run-as" #because of script do chmod on this file
adb reboot recovery
#turn on Sideload manually in recovery
adb sideload Blur_Version.98.72.182.XT894.Verizon.en.US.zip
sleep 400
adb kill-server
adb start-serversleep 5
adb shell run-as -c "mount -o remount,rw /system" #i used RUN-AS instead SU =)
adb shell run-as -c "cd /system/bin/ && mv run-as /system/xbin/su && mv run-as2 run-as"
adb shell su -c "chmod 6755 /system/bin/su"
this way gave me root rights for adb Shell, but applications still not getting root.
Any ideas, how to fix?))
Sorry for mistakes, i've tryed to avoid it)
way to fix
So, i fixed it!
1. At the start, we have 98.72.182 system, rooted by Dan Rosenberg exploit
2. Installing Safestrap recovery
3. Downloading on sdcard-ext latest SuperSU
4. Under Safestrap, installing UPDATE-SuperSU-v1.89.zip
5. Reboot to stock Android, bying SuperSu pro key, installing
6. Going to settings, and uncheck Screen block (set NONE)
7. Going to Superuser -> settings, install checkboxes: Survival mode, Enable su during boot, Trust system user
8. Reboot to the stock recovery, installing OTA update
9. Booting to OS.... (After booting you can return screen block )
10. Enjoy!
Orrrrrrrr update su binaries and back up root with voodoo. Temp disable root install update then voodoo. Restore root and enjoy... now I can only say because this is what worked for me without all the extra hoopla
Sent from my DROID4 using Tapatalk
rruleford said:
Orrrrrrrr update su binaries and back up root with voodoo. Temp disable root install update then voodoo. Restore root and enjoy... now I can only say because this is what worked for me without all the extra hoopla
Sent from my DROID4 using Tapatalk
Click to expand...
Click to collapse
I can take a video with Vodoo, which will fail with restoring root.
Before posting, i've tryed voodo ota keeper, and ota keeper function in another superuser software)
Thanks for the heads up on the update breaking root. I'll have to wipe my phone and start fresh before I do the update......unless I go kitkat.
Update.....
I tried voodoo and the OTA would not come through for me. It looks like the update will be more complicated than it's worth so the kitkat rom's will be in my near future.
Voodooo worked for me on latest O.T.A
karlsdroids said:
Thanks for the heads up on the update breaking root. I'll have to wipe my phone and start fresh before I do the update......unless I go kitkat
Click to expand...
Click to collapse
Voodooo worked for me on latest O.T.A
rruleford said:
Orrrrrrrr update su binaries and back up root with voodoo. Temp disable root install update then voodoo. Restore root and enjoy... now I can only say because this is what worked for me without all the extra hoopla
Sent from my DROID4 using Tapatalk
Click to expand...
Click to collapse
mercermtn said:
Voodooo worked for me on latest O.T.A
Click to expand...
Click to collapse
Voodoo worked for me too. Just got the OTA notice today from VZW. Followed rruleford's steps and it worked.
This was my first time using Voodoo, and possibly my imagination or possibly not - but something funky happned where I needed to reboot the phone and re-check enable in SuperSU, which was obscured by the fact Voodoo was stating it ~had~ root...
So, is there anything besides these bugfixes in the update? Any Android version updates or maybe a fix for the Shift key behaving like a lunatic?
Dang.
My wife already applied the update to her D4 and now I've lost root on that device. Can anyone advise me what to do? Should I use RSDLite like OP states? I am confused because Moto SBF page says "never flash an older version"...
tried using voodoo and the update wouldn't work...dono what to do.
svrnmnd said:
tried using voodoo and the update wouldn't work...dono what to do.
Click to expand...
Click to collapse
Did you disable SuperSU after you backed up w/ Voodoo?
Negative, how do I disable? NOTE I use superuser not superuserSU
Sent from my DROID4 using xda app-developers app
svrnmnd said:
Negative, how do I disable? NOTE I use superuser not superuserSU
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
Im not 100% sure w/Superuser - its probably similar: in settings uncheck 'Enable Superuser'
Also - if anyone out there has info on helping me w/ my wifes D4 here (a couple posts up) I would appreciate it...
bigmatty said:
Im not 100% sure w/Superuser - its probably similar: in settings uncheck 'Enable Superuser'
Also - if anyone out there has info on helping me w/ my wifes D4 here (a couple posts up) I would appreciate it...
Click to expand...
Click to collapse
Looks like you'll have to wait for a new method to be released orrrrr if another d4 is available that's rooted try downloading voodoo on both devices and backup root on rooted device then copy backup file to unrooted phones voodoo directory and try to restore that way and don't forget to update su binaries
Sent from my XT894 using Tapatalk
rruleford said:
Looks like you'll have to wait for a new method to be released orrrrr if another d4 is available that's rooted try downloading voodoo on both devices and backup root on rooted device then copy backup file to unrooted phones voodoo directory and try to restore that way and don't forget to update su binaries
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
Awesome - thanks for the reply! Yes, I have my D4 same as hers, working well and w/ a Voodoo backup... I had considered this, but couldn't find the Voodoo file backup location. Do you by chance know where it is?
Why are y'all struggling so much with this.
1. You don't need to unroot.
2. You don't need to unfreeze anything.
3. RAZR_BLADE root method still works. You have to clear cache and data and force close Smart Actions before re-rooting.
I've done three Droid 4's already. All had different apps/services frozen via Titanium Backup and all were of course rooted. One (mine) got the SOAK at version .188 and the other two got the roll out at version .189.
Install update, clear Smart Actions and re-root with the razr_blade method .bat files.
Simple, works and reauthorizing Titanium Backup will refreeze all the apps you had frozen before the update.
Sent from my Nexus 10 using Tapatalk
bigmatty said:
Awesome - thanks for the reply! Yes, I have my D4 same as hers, working well and w/ a Voodoo backup... I had considered this, but couldn't find the Voodoo file backup location. Do you by chance know where it is?
Click to expand...
Click to collapse
Not to sure as I deleted all mine when installing cm11 on stock ROM slot. Try above method with RAZR blade?
Sent from my XT894 using Tapatalk
tcrews said:
Why are y'all struggling so much with this.
1. You don't need to unroot.
2. You don't need to unfreeze anything.
3. RAZR_BLADE root method still works. You have to clear cache and data and force close Smart Actions before re-rooting.
I've done three Droid 4's already. All had different apps/services frozen via Titanium Backup and all were of course rooted. One (mine) got the SOAK at version .188 and the other two got the roll out at version .189.
Install update, clear Smart Actions and re-root with the razr_blade method .bat files.
Simple, works and reauthorizing Titanium Backup will refreeze all the apps you had frozen before the update.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
On 1 & 2 - not entirely sure anyone said to unroot or unfreeze, but I did read where it was advised to 'temp disable root', and when I followed that step voodoo did work great to allow me to update and restore root.
THANK YOU for 3!! I assumed based on some of the other comments that it didn't work. I just tried it on the other phone, and it DID restore root. VERY MUCH appreciated!!
So I use voodoo to unroot I disabled superuser but the update starts and fails everytime, I don't know why, the little android starts to update, then just gets a red x through it...
Sent from my DROID4 using xda app-developers app
I have quite a few apps frozen, but apparently nothing that prevented the install from being downloaded automatically. I unrooted with Voodoo, installed the update, restored root and all is well.
Hi everybody!
I noticed there is another update...it should not be so strong, just minor fixes...
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/97885/p/30,6720,8302/action/auth
I haven't done it yet, but after 12 hours I have always the notice about it.
I'm using Droid 4 in Europe, so I'm not so interested.
Anyway, do you know if I will lose the root permission?
Thanks!
I currently have 98.72.18.XT894.Verizon.en.US and 4.1.2, so I'm curious as to what the new updates are for the xxxxxx.188 and xxxxx.189. I would suggest something like VooDoo OTA to attempt to save your root but there is no guarantee that it will protect it if Motorola has figured out how to patch the exploit.
From Motorola, new software is .....
98.72.188.XT894.Verizon.en.US or 98.72.189.XT894.Verizon.en.US
Voodooo worked for me on latest O.T.A
karlsdroids said:
I currently have 98.72.18.XT894.Verizon.en.US and 4.1.2, so I'm curious as to what the new updates are for the xxxxxx.188 and xxxxx.189. I would suggest something like VooDoo OTA to attempt to save your root but there is no guarantee that it will protect it if Motorola has figured out how to patch the exploit.
From Motorola, new software is .....
98.72.188.XT894.Verizon.en.US or 98.72.189.XT894.Verizon.en.US
Click to expand...
Click to collapse
I used Voodoo root keeper for the latest ota update. Worked for me. Just needed to reinstall SU
mercermtn said:
I used Voodoo root keeper for the latest ota update. Worked for me. Just needed to reinstall SU
Click to expand...
Click to collapse
ok! thank you for your answer...
except for what mentioned by Motorola, the update changes something else? I mean speed or other aspects?
Same with voodoo here, didn't uninstall the SU app though
Sent from my XT894 using Tapatalk
Using voodoo to temp unroot and install the update did not work for me. I've decided to pass on the update and instead I'll just do a different rom. I found what the update consisted of and basically it's "bug fixes and security updates"- no real benefit there for me.
woodoo didn't work for me...can I use the same procedure to root again?
Sent from my DROID4 using xda app-developers app
For those who failed with voodoo, you could try Saferoot, it harmless to try...
Just root my RAZR HD although it designed for VZW Galaxy S4...
http://forum.xda-developers.com/showthread.php?t=2565758
I used voodoo on my wife's phone. Saved the su binary, installed the ota, clicked restore root. Voodoo said root restored but the check box for root stayed empty and root apps didn't work (like titanium backup). Found a post that gave terminal commands to manually restore the su backup. Worked perfectly and I now have root back. I forgot the link but luckily I copied and pasted the steps. So If voodoo said it worked but didn't, give this a try...
(I'd give credit where credit is due but lost the link)
"My wife's Transformer Infinity exhibited basically the same behaviour after its last 2 updates (both 4.2.something, IIRC). Fortunately the backup copy of su was intact, as it likely is in your case, and I was able to restore it manually using a terminal emulater app... adb would presumably have worked as well, but my notebook wasn't available at the time. Here's what I did.
.
1. Launch the terminal emulater of your choice (I used Better Terminal Emulater Pro, but the specific app probably doesn't matter)
.
2. Go to the location of the backup copy.
===========================
cd /system/usr/we-need-root
===========================
.
3. Use the su backup to obtain a root shell. This should trigger the usual superuser popup/notification, assuming that it's configured to do so.
=================
./su-backup -
=================
.
4. Remount the /system partition in read/write mode.
============================
mount -o remount,rw /system
============================
.
5. Copy the su backup to the proper location, taking care to keep the permissions intact.
=============================
cp -p su-backup /system/xbin/su
=============================
.
6. Remount the /system partition in the normal, read-only mode.
=============================
mount -o remount,ro /system
=============================
.
7. Reboot the device (might not be strictly required), to ensure that any root-enabled background apps are able to startup cleanly.
.
The usual disclaimers apply, of course. Your device might not have the same configuration as mine, etc., so these commands may need some tweaking. Also, if it was a 4.3 upgrade which caused you to lose root then this procedure likely won't work... I believe that su needs to be running in daemon mode in order to grant privileges, which certainly won't be the case for the backup copy (even if it is a 4.3-compatible version).
squall90x said:
Hi everybody!
I'm using Droid 4 in Europe, so I'm not so interested.
Thanks!
Click to expand...
Click to collapse
I too use this in Europe, and made the mistake of accepting this OTA update, which bricked my data connectivity. More info in this post:
http://forum.xda-developers.com/showpost.php?p=49627296&postcount=23
mike-phone said:
I too use this in Europe, and made the mistake of accepting this OTA update, which bricked my data connectivity. More info in this post:
http://forum.xda-developers.com/showpost.php?p=49627296&postcount=23
Click to expand...
Click to collapse
My data connectivity works without problems...
squall90x said:
My data connectivity works without problems...
Click to expand...
Click to collapse
Your reply inspired me to dig a bit deeper. It looks like the OTA update just cleared the list of APNs. I re-added the APN, and it works fine. Thanks.
mike-phone said:
Your reply inspired me to dig a bit deeper. It looks like the OTA update just cleared the list of APNs. I re-added the APN, and it works fine. Thanks.
Click to expand...
Click to collapse
You're welcome!
Sorry I didn't tell you...it was the same also for me!!
androitri said:
For those who failed with voodoo, you could try Saferoot, it harmless to try...
Just root my RAZR HD although it designed for VZW Galaxy S4...
http://forum.xda-developers.com/showthread.php?t=2565758
Click to expand...
Click to collapse
Thank you so much for this link. I accepted this OTA update about a week ago and lost my root access, despite having run Voodoo OTA Rootkeeper (maybe I did something wrong?) I tried to re-root it using the Razr Blade tool (which is what I had used originally to get root access), but that didn't work. Apparently motorola/verizon plugged the smart action security hole. But this one (saferoot) got the job done. Back to wifi tethering; thanks!
Richard
edit: I have the Droid 4 XT894, and the OTA update which broke my root was 98.72.189.XT894.Verizon.en.US
squabeggz said:
I used voodoo on my wife's phone. Saved the su binary, installed the ota, clicked restore root. Voodoo said root restored but the check box for root stayed empty and root apps didn't work (like titanium backup). Found a post that gave terminal commands to manually restore the su backup. Worked perfectly and I now have root back. I forgot the link but luckily I copied and pasted the steps. So If voodoo said it worked but didn't, give this a try...
(I'd give credit where credit is due but lost the link)
"My wife's Transformer Infinity exhibited basically the same behaviour after its last 2 updates (both 4.2.something, IIRC). Fortunately the backup copy of su was intact, as it likely is in your case, and I was able to restore it manually using a terminal emulater app... adb would presumably have worked as well, but my notebook wasn't available at the time. Here's what I did.
.
1. Launch the terminal emulater of your choice (I used Better Terminal Emulater Pro, but the specific app probably doesn't matter)
.
2. Go to the location of the backup copy.
===========================
cd /system/usr/we-need-root
===========================
.
3. Use the su backup to obtain a root shell. This should trigger the usual superuser popup/notification, assuming that it's configured to do so.
=================
./su-backup -
=================
.
4. Remount the /system partition in read/write mode.
============================
mount -o remount,rw /system
============================
.
5. Copy the su backup to the proper location, taking care to keep the permissions intact.
=============================
cp -p su-backup /system/xbin/su
=============================
.
6. Remount the /system partition in the normal, read-only mode.
=============================
mount -o remount,ro /system
=============================
.
7. Reboot the device (might not be strictly required), to ensure that any root-enabled background apps are able to startup cleanly.
.
The usual disclaimers apply, of course. Your device might not have the same configuration as mine, etc., so these commands may need some tweaking. Also, if it was a 4.3 upgrade which caused you to lose root then this procedure likely won't work... I believe that su needs to be running in daemon mode in order to grant privileges, which certainly won't be the case for the backup copy (even if it is a 4.3-compatible version).
Click to expand...
Click to collapse
After some days I found time to try...
I put the same command and reboot and it worked!!
Thank you so much!!