does tun.ko n cifs.ko modules make gprs fast???
Google It. Don't be lazy.
F4uzan said:
Google It. Don't be lazy.
Click to expand...
Click to collapse
i have already googled it,,, i not able to understand,,, so i post it here,, they both files were provided with andro-3.3.1 so that's y asking it,,
vasu1 said:
does tun.ko n cifs.ko modules make gprs fast???
Click to expand...
Click to collapse
GPRS speed is determined by the Network provider, and I don't think the Kernel modules have anything to do in particular.
Anyways see by yourself by putting those .ko files in /system/lib/modules
coolsandie said:
GPRS speed is determined by the Network provider, and I don't think the Kernel modules have anything to do in particular.
Anyways see by yourself by putting those .ko files in /system/lib/modules
Click to expand...
Click to collapse
i am facing gprs slow problem in andro-id ,,, but in rest of the roms gprs works fast,, so i thought this could help,,, is any way to chnge gprs file from other rom to andro-id??
I think tun.ko is used for vpn
cifs.ko is mainly used for mounting (don't know what)
but no one is related with gprs
try different modems
dheeraj (dhlalit11) said:
I think tun.ko is used for vpn
cifs.ko is mainly used for mounting (don't know what)
but no one is related with gprs
try different modems
Click to expand...
Click to collapse
do you know which files are to be replaced related to internet/gprs?
no man I dont
Related
I have aNetShare, the tether app, and ive been able to connect my laptop and both devices say connected and the g1 says it has data going through at 11mbps, but my laptops internet or anything else that requires internet doesnt work. I was wondering does this app not work correctly with Haykuros Magic Port? (FYI im using 5.0.1) i havent tried it on RC33
Tbh, I dont think it works.. If you look at the logs, Theres alot and i mean alot of failed things
ben29pickett said:
Tbh, I dont think it works.. If you look at the logs, Theres alot and i mean alot of failed things
Click to expand...
Click to collapse
Oh really? Well thank you for pointing that out to me, if anybody can get this app to work on any firmware please let me know
As far as my understanding goes, there is no netfilter support in the haykuro builds of android. aNetshare and Wifi Tether require this in order to function correctly.
andonnguyen said:
As far as my understanding goes, there is no netfilter support in the haykuro builds of android. aNetshare and Wifi Tether require this in order to function correctly.
Click to expand...
Click to collapse
aNetshare WILL function without the netfilter support compiled into the kernel.
semyazza said:
aNetshare WILL function without the netfilter support compiled into the kernel.
Click to expand...
Click to collapse
Regardless, the new Haykuro build supports tethering afaik...
semyazza said:
aNetshare WILL function without the netfilter support compiled into the kernel.
Click to expand...
Click to collapse
thats b*ll****.
kaobiore said:
thats b*ll****.
Click to expand...
Click to collapse
semyazza said:
aNetshare WILL function without the netfilter support compiled into the kernel.
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/Loadable_kernel_module
Just because no one is using it currently doesn't mean YOU can't use it.
More interesting information
More interesting information. All you have to do by the way is compile into the kernel and use it as an external module (lower memory consumption by not using statically linked modules you may not need). Also, another reason we shouldn't be downloading images from untrusted locations without checksums, way too easy to make a root kit.
http://upche.org/doku.php?id=wiki:rootkit
semyazza said:
http://en.wikipedia.org/wiki/Loadable_kernel_module
Just because no one is using it currently doesn't mean YOU can't use it.
Click to expand...
Click to collapse
You have never compiled a kernel, right?
There are some kernel-options which can't be compiled as module and netfilter-support is one of them.
After searching this forum, doesn't seem to be able to find one for Atrix.
Spend sometime grabbed the kernel and compiled this module. Tested working with my wife's AT&T Atrix with 1.8.3 using cifsmanager.
Let me know how it goes for you guys.
it does what?
jimmao said:
After searching this forum, doesn't seem to be able to find one for Atrix.
Spend sometime grabbed the kernel and compiled this module. Tested working with my wife's AT&T Atrix with 1.8.3 using cifsmanager.
Let me know how it goes for you guys.
Click to expand...
Click to collapse
so what does this do!?!?!
EclipseX said:
it does what?
Click to expand...
Click to collapse
Maybe network file sharing since cifsmanger is being used
Sent from my MB860 using XDA Premium App
ricethief said:
Maybe network file sharing since cifsmanger is being used
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
If you do not know what it is for, then that means in most case you do not need it.
Basically what it does to me is it allows you to access network shares with non-ANSI folder/file names.
Thanks a lot,
It works.
I compiled the kernel twice but none of utf8.ko worked.
Could you please tell me the steps to compile it? Like to learn something.
jimmao said:
After searching this forum, doesn't seem to be able to find one for Atrix.
Spend sometime grabbed the kernel and compiled this module. Tested working with my wife's AT&T Atrix with 1.8.3 using cifsmanager.
Let me know how it goes for you guys.
Click to expand...
Click to collapse
heyhi said:
Thanks a lot,
It works.
I compiled the kernel twice but none of utf8.ko worked.
Could you please tell me the steps to compile it? Like to learn something.
Click to expand...
Click to collapse
You need to set nls_utf8=m (m means module) in .config file. =y will compile it into the kernel....
Err, if you got .ko file but it doesn't work, then I do not know why..., did you compile kernel against the one published by Moto?
Good work.
jimmao said:
You need to set nls_utf8=m (m means module) in .config file. =y will compile it into the kernel....
Err, if you got .ko file but it doesn't work, then I do not know why..., did you compile kernel against the one published by Moto?
Click to expand...
Click to collapse
The first time I used =m and make modules. It generated a .ko file slightly smaller than yours. The second time I used =y and it's still the same .ko file.
I downloaded the 1.2.6 kernel source from moto website.
Hi, guys, could anyone compile cifs and nls_utf8 for milestone 2? Dont know if it´s different from atrix compiling...
heyhi said:
The first time I used =m and make modules. It generated a .ko file slightly smaller than yours. The second time I used =y and it's still the same .ko file.
I downloaded the 1.2.6 kernel source from moto website.
Click to expand...
Click to collapse
That's interesting, basically, =y will not give you .ko file anyway, so you will see the results from the first time.
My one was compiled under OSX, while environment was setup using macport, that might be different than compiling under linux. But at this stage, I really could not tell what was the cause that you can get the .ko file but not able to use it.
Hello, I decided to open this thread to understand the situation of +20MB Ram Fix on Gingerbread ROM, MoDaCo is currently offering this service, but does not explain how to do it by yourself, so, someone can make a guide to be useful at all? exactly what needs to modify in Settings.apk?
If someone posts a guide I will be happy to include it in the first post
Take an original and modified setting.apk and compare yourself
(I'm not a dev... I think just)
what it mean: " 3 Smartpack Gold." on your signature?
rafaelsartori said:
what it mean: " 3 Smartpack Gold." on your signature?
Click to expand...
Click to collapse
It 's my SIM.
However, I figured out how to do probably, as soon as I have time, place a guide.
Hell_97 said:
It 's my SIM.
However, I figured out how to do probably, as soon as I have time, place a guide.
Click to expand...
Click to collapse
waiting for...
Topogigi made a trick like that to use ram normally used by LG Ota, that is in fact not used at least in Europe. Besides removing omadm client he did something in services I guess, perhaps you could find a clue in his thread.
20 mb ram fix.. for a device with 512 mb it very well !!!
From memory, you don't need to do anything other than remove the ovdm apk, but attempting to check for updates from settings causes an FC.
Rusty! said:
From memory, you don't need to do anything other than remove the ovdm apk, but attempting to check for updates from settings causes an FC.
Click to expand...
Click to collapse
Correct. Stops settings/about working all together however.
See here my post: http://forum.xda-developers.com/showpost.php?p=20504844&postcount=4348
Topogigi made a hack in Settings.apk to resolve the problem. It seems to work with V20M too.
Works great thanks
Striatum_bdr said:
See here my post: http://forum.xda-developers.com/showpost.php?p=20504844&postcount=4348
Topogigi made a hack in Settings.apk to resolve the problem. It seems to work with V20M too.
Click to expand...
Click to collapse
Is this file for V20M only ? Can it be used with V20L or is there another version of Settings.apk ?
froki said:
Is this file for V20M only ? Can it be used with V20L or is there another version of Settings.apk ?
Click to expand...
Click to collapse
It was based on v20e, it works on 20m so it should work on 20l.
as I tittle it...
Im using MiniCM6 from this link http://forum.xda-developers.com/showthread.php?t=964223 but there have a problem with it bluetooth...
my other phone can read it but when I want to send anything can not be send on my x8... on my other phone is using stock rom, and it said my x8 pin code is wrong and can not be send...
how to fix this?? urm I already tried third partition app... like bluetooth file browser or something like that but no luck...
hope anyone can help me out..
BohArie said:
as I tittle it...
Im using MiniCM6 from this link http://forum.xda-developers.com/showthread.php?t=964223 but there have a problem with it bluetooth...
my other phone can read it but when I want to send anything can not be send on my x8... on my other phone is using stock rom, and it said my x8 pin code is wrong and can not be send...
how to fix this?? urm I already tried third partition app... like bluetooth file browser or something like that but no luck...
hope anyone can help me out..
Click to expand...
Click to collapse
You better try a full wipe and delvik cache wipe...
It might help you as it solves a lot of problems..
harshitgroup said:
You better try a full wipe and delvik cache wipe...
It might help you as it solves a lot of problems..
Click to expand...
Click to collapse
Already do that... another ways??
Probably you're sending a file with a file type not supported by Android itself.
Try changing the extension to familiar ones like mp3, txt.
Sometimes, if an app supports it, it may work.
Lily48 said:
Probably you're sending a file with a file type not supported by Android itself.
Try changing the extension to familiar ones like mp3, txt.
Sometimes, if an app supports it, it may work.
Click to expand...
Click to collapse
why you say that?? android doesnt support apk file??
BohArie said:
why you say that?? android doesnt support apk file??
Click to expand...
Click to collapse
I had this problem before in CM6. I had to changed the extensions to txt.
I can't also download apk using the stock browser.
But in CM7, it works. I don't know if it works with Stock ROM.
If any files can't send or receive, I recommend updated ROMs... clean ROMs, I prefer.
MiniCM7 2.2.0 or PrimeHD 8...
magisk-init.d-simulator
A powerful init.d simulator module based on magisk.
Using it by copying scripts to /magisk/init/init.d/ after installation.
https://github.com/simonsmh/magisk-init.d-simulator
No work with v11.
koko115 said:
No work with v11.
Click to expand...
Click to collapse
Not longer needed, it's already included in v11
How turn on init.d in v11.. can You tell me ?
koko115 said:
How turn on init.d in v11.. can You tell me ?
Click to expand...
Click to collapse
Place your init.d scripts in /magisk/.core/post-fa-data.d folder.
Sent from my SM-N910G using Tapatalk
It still working with v11 but please use official service instead.
Why would you use this instead of post-fs-data.sh?
rignfool said:
Why would you use this instead of post-fs-data.sh?
Click to expand...
Click to collapse
To support running multi scripts easily.
delete
Does this work with v15? I ask because afwall hasn't been updated to support the new directory to run the start up data leak fix. (I made a ticket on github a year ago about it for afwall.) I don't begrudge the author, I think they're probably quite busy. However, I am unsure when the issue will be fixed.
So I'm hoping someone can help me out, I don't know how to do it manually, anyway...
take care.