Guys where I can find flash counter number. I am not able to find it in. Thanks
You should go into download mode. Press and hold the volume down the home and the power key at once
Sent from my GT-N7000 using xda premium
dhruva7 said:
Guys where I can find flash counter number. I am not able to find it in. Thanks
Click to expand...
Click to collapse
boot in download mode (power + home + volume up), It will show there or download triangle away app and will tell you.
Thanks but triangle away app told i have 0 flash counter but i have flashed three to four times custom rom but how come its still 0
dhruva7 said:
Thanks but triangle away app told i have 0 flash counter but i have flashed three to four times custom rom but how come its still 0
Click to expand...
Click to collapse
How did u flash the roms? If you flash Custom roms/custom kernels using PC Odin, it will increase the counter..
I flashed using cwm 6 mate . Through sd card.
I meant through download mode.
dhruva7 said:
I meant through download mode.
Click to expand...
Click to collapse
Flashing custom cm roms or aokp through cwm won't necessarily raise the counter. I've only had 2 raised counters and that was when flashing with pc Odin. It seems mobile odin or cwm are a bit more reliable on that front. And I think it's more the kernel that raises flash counter.
Sent from my GT-N7000 using xda premium
I have used only official rom to flah with pc odin and all the custom Roms were flashed using cwm/download mode through sd card.. And it's didn't show any yellow triangle on my screen though.
dhruva7 said:
I have used only official rom to flah with pc odin and all the custom Roms were flashed using cwm/download mode through sd card.. And it's didn't show any yellow triangle on my screen though.
Click to expand...
Click to collapse
You will get that yellow triangle or raised flash counter only when you flash anything other than the stock ones using pc odin
dhruva7 said:
Thanks but triangle away app told i have 0 flash counter but i have flashed three to four times custom rom but how come its still 0
Click to expand...
Click to collapse
no worries about there. I myself flashed ROMs quite a few times already and my counter is still 0.. I know of others whose counter is still 0 even though they've flashed more than thrice compared to mine. But hey, I'm not complaining. It is good that my counter is still at 0.. Many use triangle away to reset theirs to 0 but mine has always been 0 so all is good
Well Jay we are lucky lol
Related
Can anyone confirm TriangleAway can be used on the leaked ICS for the Galaxy note?
Chanfire said some user reported it did in his Galaxy S2 thread http://forum.xda-developers.com/showthread.php?t=1494114, but I want to double check before using it.
Worked fine for me using PC odin.
robb13 said:
Can anyone confirm TriangleAway can be used on the leaked ICS for the Galaxy note?
Chanfire said some user reported it did in his Galaxy S2 thread http://forum.xda-developers.com/showthread.php?t=1494114, but I want to double check before using it.
Click to expand...
Click to collapse
borgesandme said:
Worked fine for me using PC odin.
Click to expand...
Click to collapse
You used odin for triangleaway??
Sent from my GT-I9220 using XDA Premium HD app
robb13 said:
You used odin for triangleaway??
Click to expand...
Click to collapse
Forget about Odin. Just install the app normally and it should work. It did for me and countless others: I've yet to hear someone reporting a problem with the process.
Yup triangle away works perfectly. Go ahead use it
Cheers
BOOMED from my BOMBASTIC NOTE :-D
i tried it .. my counter is zero now but still my download mode shows yellow triangle.......
How can i remove that triangle????
maniacscorpio said:
i tried it .. my counter is zero now but still my download mode shows yellow triangle.......
How can i remove that triangle????
Click to expand...
Click to collapse
If m not wrong the triangle that you get when you press volume down + home button + power button then it is a warning sign that you gonna make changes which are not supposed to be made as per the manufacturer. There shouldn't be a triangle in the bottom when you reboot you Note and where it says before loading the boot animation Samsung Galaxy Note GT N7000. If its there then it gets fixed by Triangle Away.
CHeers!
robb13 said:
You used odin for triangleaway??
Sent from my GT-I9220 using XDA Premium HD app
Click to expand...
Click to collapse
I flashed triangleaway afterwards, I'm not sure why I worded it like that originally.
well this app reset my counter but triangle is still there on my download page... picture attached
maniacscorpio said:
well this app reset my counter but triangle is still there on my download page... picture attached
Click to expand...
Click to collapse
Edit - I am sure about it now. just checked. the triangle in your screenshot will always be there. Its by default.
If m not wrong the triangle that you get when you press volume down + home button + power button then it is a warning sign that you gonna make changes which are not supposed to be made as per the manufacturer. There shouldn't be a triangle in the bottom when you reboot you Note and where it says before loading the boot animation Samsung Galaxy Note GT N7000. If its there then it gets fixed by Triangle Away.
CHeers!
Yeap, that triangle is just a warning to be careful with download mode.
Anyway, I can now confirm the app indeed works with the Note. I just used it, no more triangle and cero counts in download mode.
Thank you everybody. Specially Chainfire!
Sent from my GT-I9220 using XDA Premium HD app
robb13 said:
Yeap, that triangle is just a warning to be careful with download mode.
Anyway, I can now confirm the app indeed works with the Note. I just used it, no more triangle and cero counts in download mode.
Thank you everybody. Specially Chainfire!
Sent from my GT-I9220 using XDA Premium HD app
Click to expand...
Click to collapse
Glad it all went well for you
Thanks chainfire by clicking his thanks button and everyone who have helped you. keeps the community and motivation ticking
i never had triangle on boot screen.. my counter was 1 but when i used this apk counter set to 0 & triangle appears on Download mode
I will suggest you read what is written in above posts carefully. And if u are still apprehensive then go ahead find a stock non rooted note and go to download mode in tht and see if the triangle is there or not.
Thanks
BOOMED from my BOMBASTIC NOTE :-D
maniacscorpio said:
i never had triangle on boot screen.. my counter was 1 but when i used this apk counter set to 0 & triangle appears on Download mode
Click to expand...
Click to collapse
Triangle only in download mode or on every booting?
b'coz download triangle is normal.
For clarity:
A brand new stock out of the box note will show a yellow triangle in download mode. This is perfectly normal, and is not a problem.
Triangleaway and other methods are intended to remove the yellow triangle that CAN appear on your regular boot screen - NOT the download mode screen.
sideways86 said:
For clarity:
A brand new stock out of the box note will show a yellow triangle in download mode. This is perfectly normal, and is not a problem.
Triangleaway and other methods are intended to remove the yellow triangle that CAN appear on your regular boot screen - NOT the download mode screen.
Click to expand...
Click to collapse
Thanks for the help....hope he understands....i have been trying to tell him the same thing from that time
I have a problem. Everytime I try to run the application, it force closes when I'm about to clear my binary count. I tried it on an older version, 1.10, which worked before but now that also FCs. I'm on AOSP based on Milestone by eaglerazor123.
Anybody have an idea how to go about the problem? my binary count is an 2.
And also, everytime I try to flash a new ROM, it either hangs up during the installation or I get a black screen after the Samsung logo ( with the yellow triangle). Is that in anyway related?
Thank you. Hope someone can help me.
risayap said:
I have a problem. Everytime I try to run the application, it force closes when I'm about to clear my binary count. I tried it on an older version, 1.10, which worked before but now that also FCs. I'm on AOSP based on Milestone by eaglerazor123.
Click to expand...
Click to collapse
Sounds to me that you don't have proper root. Why don't you use any Explorer with root permissions and try to paste and/or delete something from your system folder? Tell us what happens.
risayap said:
And also, everytime I try to flash a new ROM, it either hangs up during the installation or I get a black screen after the Samsung logo ( with the yellow triangle). Is that in anyway related?
Click to expand...
Click to collapse
Current ICS CWMR is not working as it should, that's a known issue. If you want to go back to GB, for instance, first you have to flash a GB kernel to get its CWMR, reboot recovery, then do your stuff (wipes, flashing a new Rom, restore etc.)
chasmodo said:
Current ICS CWMR is not working as it should, that's a known issue. If you want to go back to GB, for instance, first you have to flash a GB kernel to get its CWMR, reboot recovery, then do your stuff (wipes, flashing a new Rom, restore etc.)
Click to expand...
Click to collapse
So CWMR indeed has an issue? Good to know! I flashed Imilka's aosp then wanted to come back to ics leak and got the same error in recovery. I thought I was loser for not doing it right haha.
I'll look for a thread to flash another recovery so I can flash some roms
Sent from my GT-I9220 using XDA Premium HD app
Hi all i have really messed up my note... i been trying to flash it and i bricked it now the phone will only get into download mode... Also i have 1 count on the custom rom... My question is i have booked the phone in with Samsung to get it fixed but when Samsung put the phone into download mode they will see the 1 count does that void my warranty ??? Will samsung fix it for me ???
You have voided your warranty
You need a USB jig to clear the counter
How did u brick the phone
Sent from my GT-N7000 using xda premium
If you can get into download mode, and can't you install an official ROM via pc odin?
Sent from my GT-N7000 using xda premium
There are two ways to remove the yellow triangle/binary count without a jig...I have a kernel, and I there is Triangle Away...
And if you can get into download mode, your phone is not bricked...just soft bricked. Flash a stock firmware...
smalmagal said:
There are two ways to remove the yellow triangle/binary count without a jig...I have a kernel, and I there is Triangle Away...
And if you can get into download mode, your phone is not bricked...just soft bricked. Flash a stock firmware...
Click to expand...
Click to collapse
triangle away not working in gingerbread
Sent from my GT-N7000 using Tapatalk
Easiest way is
If you are able to get into download mode
1. Flash Stock ROM with PC odin
2. get root N install ICS base custom ROM
3.Use triangle away to reset counter
4 Back to Stock ROM
Framedtrash said:
You have voided your warranty
You need a USB jig to clear the counter
How did u brick the phone
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Dude its a long story first i tried rooting my note and that failed to root but i lost all connectivity to GSM & 3G Networks i couldn't make calls or send SMS so then i flash ICS i still had the same problem no network connectivity then i flashed 2.3.5 i still had no network connectivity then i updated my note to 2.3.6 via ABOUT SOFTWARE UPDATE after the update i still had no network connectivity then i tried to re-flash 2.3.5 thats when it got bricked now when i turn on my phone i have the following message --> FIRMWARE UPGRADE ENCOUNTERED AN ISSUES. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN.. Plus 1 binary count.. Thanks
dr.ketan said:
Easiest way is
If you are able to get into download mode
1. Flash Stock ROM with PC odin
2. get root N install ICS base custom ROM
3.Use triangle away to reset counter
4 Back to Stock ROM
Click to expand...
Click to collapse
dude it keeps failing every time i try to flash it i have attached a pic of odin Thanks
SpyderTracks said:
If you can get into download mode, and can't you install an official ROM via pc odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
odin keeps faling im on mac using VMware Fusion running windows 7 ultimate ??? Thanks
Your device gets failed while flashing factoryfs
this is not good sign
Try on window machine.
Wasn't there a kernel version which zeroes the binary counter from angelom (following the bricking fiasco)? Someone might still have it
Sent from my GT-N7000 using Tapatalk 2 Beta-5
mfractal said:
Wasn't there a kernel version which zeroes the binary counter from angelom (following the bricking fiasco)? Someone might still have it
Sent from my GT-N7000 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Please if you know any one please give me a shout... Thanks Dude
N1NJATH3ORY said:
Please if you know any one please give me a shout... Thanks Dude
Click to expand...
Click to collapse
you could pm angelom about it.
Just make sure you know what you're doing.
Kernel to get rid of Yellow Triangle/Binary Count.
smalmagal said:
There are two ways to remove the yellow triangle/binary count without a jig...I have a kernel, and I there is Triangle Away...
And if you can get into download mode, your phone is not bricked...just soft bricked. Flash a stock firmware...
Click to expand...
Click to collapse
Where can I get the kernel you mentioned that could reset the binary count without using a USB JIG? Appreciate if you can point me the download site. I'm using an Asian unit GN7000.
Many thanks in advance for your kind help.
Regards,
Danny.
N1NJATH3ORY said:
dude it keeps failing every time i try to flash it i have attached a pic of odin Thanks
Click to expand...
Click to collapse
Have you tried setting pit and repartition?
That will reformat the partition tables
Sent from my iPad using Tapatalk
dannche said:
Where can I get the kernel you mentioned that could reset the binary count without using a USB JIG? Appreciate if you can point me the download site. I'm using an Asian unit GN7000.
Many thanks in advance for your kind help.
Regards,
Danny.
Click to expand...
Click to collapse
Hi dude here is the message angelom sent to me its got the link to the Kernel Enjoy
So here is the link kernel that reset counter and remove yellow triangle:
http://www.mediafire.com/?5bmrc6cf81w5mya
Of course this is what I tried last night and it was fine (flashed over 10 times)
instructions:
It 'a tar file, then flashed it with Odin Pc
You need to have ICS, so if you tried to install GB with odin, you have to flash the Chinese leak ICS (always with odin)
Even if you flash the rom from error, after trying to install, always installs with odin the kernel, it usually also with your problem is successful.
Just you see that phone reboot (just odin gives you the message that the flash of the kernel has been successful) disconnect the usb cable and press once the keys to enter the recovery mode (Vol + + home + power) and keep them pressed until do not see the recovery.
You'll still have the yellow triangle.
When did you get into recovery (still touch CWM) touch on reboot
So, even if eventually the Rom should not start it for the problem of partitions, you'll see that the triangle is gone and the counter is reset.
Of course you do so at your own risk, given my experience after what has happened, I emphasize.
N1NJATH3ORY said:
Hi dude here is the message angelom sent to me its got the link to the Kernel Enjoy
So here is the link kernel that reset counter and remove yellow triangle:
http://www.mediafire.com/?5bmrc6cf81w5mya
Of course this is what I tried last night and it was fine (flashed over 10 times)
instructions:
It 'a tar file, then flashed it with Odin Pc
You need to have ICS, so if you tried to install GB with odin, you have to flash the Chinese leak ICS (always with odin)
Even if you flash the rom from error, after trying to install, always installs with odin the kernel, it usually also with your problem is successful.
Just you see that phone reboot (just odin gives you the message that the flash of the kernel has been successful) disconnect the usb cable and press once the keys to enter the recovery mode (Vol + + home + power) and keep them pressed until do not see the recovery.
You'll still have the yellow triangle.
When did you get into recovery (still touch CWM) touch on reboot
So, even if eventually the Rom should not start it for the problem of partitions, you'll see that the triangle is gone and the counter is reset.
Of course you do so at your own risk, given my experience after what has happened, I emphasize.
Click to expand...
Click to collapse
I would be super very mega careful with this one.
ONLY USE IF YOU ARE HARDBRICKED AND HAVE NOTHING TO LOSE!
+1!!!
Sent from my GT-N7000 using xda premium
Samsung phoned me today they found out my phone had been rooted.. They gave me 2 options 1st option cost £33.00 flashing software if that doesn't work 2nd option £160.00 replace the board **** this phone is costing me a arm and a leg if the first option doesn't work Dam SAMSUNG....
N1NJATH3ORY said:
Samsung phoned me today they found out my phone had been rooted.. They gave me 2 options 1st option cost £33.00 flashing software if that doesn't work 2nd option £160.00 replace the board **** this phone is costing me a arm and a leg if the first option doesn't work Dam SAMSUNG....
Click to expand...
Click to collapse
how did they find out, didn't you zero the flash counter and remove the triangle ?
not that i am new to rooting..
wanted to ask if i would root my note, n then make a back up from recovery .. n i would flash any rom or kernel.. n i would flash my backed up stock rom again n unroot it n flash the stock recovery.. still i wouldnt have my warranty back??
mhrsolanki2020 said:
not that i am new to rooting..
wanted to ask if i would root my note, n then make a back up from recovery .. n i would flash any rom or kernel.. n i would flash my backed up stock rom again n unroot it n flash the stock recovery.. still i wouldnt have my warranty back??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1373728
mhrsolanki2020 said:
not that i am new to rooting..
wanted to ask if i would root my note, n then make a back up from recovery .. n i would flash any rom or kernel.. n i would flash my backed up stock rom again n unroot it n flash the stock recovery.. still i wouldnt have my warranty back??
Click to expand...
Click to collapse
If you hardbrick your phone due to bug, as long you have no binary count ( use triangleaway or usb jig ), you can claim your warranty.
jonpaslim said:
If you hardbrick your phone due to bug, as long you have no binary count ( use triangleaway or usb jig ), you can claim your warranty.
Click to expand...
Click to collapse
can you tell me more about a "binary count , triangleway and usb jig" ..? plz
mhrsolanki2020 said:
can you tell me more about a "binary count , triangleway and usb jig" ..? plz
Click to expand...
Click to collapse
If you go to download mode you will see it at the top, if you see 0 then your ok.
Triangle away is a program that set your binary count to zero.
Usb jig, is a device you put it in your usb to enable you to go download mode without doing a combo button and use also to set your binary count to zero. But the easiest now a day is to use triangle away, google it for further info.
Sent from my GT-N7000 using xda premium
jonpaslim said:
If you go to download mode you will see it at the top, if you see 0 then your ok.
Triangle away is a program that set your binary count to zero.
Usb jig, is a device you put it in your usb to enable you to go download mode without doing a combo button and use also to set your binary count to zero. But the easiest now a day is to use triangle away, google it for further info.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thank you
if I only upgraded to stock samsung firmware roms, will my counter still be triggerd? and how would I check before I send it for service?
No, the updates from Samsung will not trigger the flash counter. You can check this by restarting your phone - if you see a yellow triangle during the loading screen, then it was activated; if not, then everything is ok.
Since there are no custom kernels or recoveries for our device just yet, I don't think you would even have something to trigger it with.
Sent from my GT-I8190 using xda premium
sholimar said:
No, the updates from Samsung will not trigger the flash counter. You can check this by restarting your phone - if you see a yellow triangle during the loading screen, then it was activated; if not, then everything is ok.
Since there are no custom kernels or recoveries for our device just yet, I don't think you would even have something to trigger it with.
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
But I have note2 and no yellow traingle start but note2 have a flash counter I see in download mode.
I want to root mini but I cant see flash counter.I want to know this device have flash counter?
hey guys, i believe i acquired a soft bricked galaxy s last night. from what the girl told me, it had been rooted, custom rom installed, and im guessing a kernel aswell.it gets past the "world phone" screen then gets stuck at the glowing android coming out of the ground. Im assuming its a kernel problem. ive tried alot of methods on here, searched alot of the forums on these phones being soft bricked. tried the vol+,home, power; vol-,home, power; both volumes, power; also tried with connecting usb and odin open; both volumes, connect usb, input batt; vol-, connect usb, input batt; ectect. i just cant get past that boot logo. I have the drivers from samsung installed but when connecting to the computer it registers that something connected but doesnt identify the phone. so is there anything i am missing guys? i read about the jig and i am guessing thats where im gonna have to go with this. no problem there; just seeing if anyone has any other ideas. thanks in advance guys!
coltlacey1 said:
hey guys, i believe i acquired a soft bricked galaxy s last night. from what the girl told me, it had been rooted, custom rom installed, and im guessing a kernel aswell.it gets past the "world phone" screen then gets stuck at the glowing android coming out of the ground. Im assuming its a kernel problem. ive tried alot of methods on here, searched alot of the forums on these phones being soft bricked. tried the vol+,home, power; vol-,home, power; both volumes, power; also tried with connecting usb and odin open; both volumes, connect usb, input batt; vol-, connect usb, input batt; ectect. i just cant get past that boot logo. I have the drivers from samsung installed but when connecting to the computer it registers that something connected but doesnt identify the phone. so is there anything i am missing guys? i read about the jig and i am guessing thats where im gonna have to go with this. no problem there; just seeing if anyone has any other ideas. thanks in advance guys!
Click to expand...
Click to collapse
A jig will force download mode but is only needed is vol down + power button doesn't get you in it.
Do you know if she was on gb and up? That would change your button combo to get in recovery to vol up + down + power button.
If you can get in recovery that way, you have 2 options: 1- clear cache and dalvik (in advanced) and try rebooting. 2- reflash the custom ROM she was running (without deleting anything).
If recovery doesn't work, get in download mode and flash Odin KK4 without bootloaders (in dev section). From there, you'll need to flash Corn kernel with Odin 1.85 and you'll be able to get in recovery to flash the ROM and Gapps she was running. *Doing this will wipe her apps and apps data*
Sent from my SGH-I897 using xda app-developers app
BWolf56 said:
A jig will force download mode but is only needed is vol down + power button doesn't get you in it.
Do you know if she was on gb and up? That would change your button combo to get in recovery to vol up + down + power button.
If you can get in recovery that way, you have 2 options: 1- clear cache and dalvik (in advanced) and try rebooting. 2- reflash the custom ROM she was running (without deleting anything).
If recovery doesn't work, get in download mode and flash Odin KK4 without bootloaders (in dev section). From there, you'll need to flash Corn kernel with Odin 1.85 and you'll be able to get in recovery to flash the ROM and Gapps she was running. *Doing this will wipe her apps and apps data*
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
yea, whatever happens to the phone doesnt matter, its mine now, was just given to me. sadly idk what rom she was running, her sd card is MIA, and idk what OS she was running on. i highly doubt she would even know. so at this point after trying all the button combos, think a jig is the only option?
What happens if u pull the battery, replace it, leave phone off, phone must be off, connect usb end of cable to ur pc, hold both volume up and down together and then insert micro usb into phone ??
Download mode yes or no ?
If no see my sig below (if ur on a pc or in a web browser)...there are links there on how to make a Jig and/or where to buy a Jig.
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
What happens if u pull the battery, replace it, leave phone off, phone must be off, connect usb end of cable to ur pc, hold both volume up and down together and then insert micro usb into phone ??
Download mode yes or no ?
If no see my sig below (if ur on a pc or in a web browser)...there are links there on how to make a Jig and/or where to buy a Jig.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Same story man. Probably gonna be jig is what it is looking like. Any ideas what cause this to happen? Ex. Not being able to enter recovery/download by using proper button combos?
Just a known issue on some Capivates. But the flash up to GB firmware is the fix for the button combos failin to work. Once u have the GB BLs ur button combos should work.
So once u get a jig, Odin or Heimdall up to KK4 with Bootloaders (heed all warnings about flashin BLs). Then u can Odin KK4 Corn Kernel and proceed where u wish.
Sent from my SGH-I777 using xda premium
Thanks for responding. I'll probably tear into it tomorrow. Have a link to kk4 w/boot have thee corn kernel saved
Here is Stock KK4....http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SGH-I777 using xda premium
Beauty! So that should wake it up. And from there I can reboot, find out what is it has then flash a new ROM after making sure recovery works and whatnot?
After the Stock kk4 flash it will have....Stock i897ucKK4 Gingerbread 2.3.5 Firmware.
So afterwards u will need to use Odin to flash the .tar file version of the KK4 Corn Kernel in order to get cwm recovery and go from there in the flashin of dev roms if u want.
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
After the Stock kk4 flash it will have....Stock i897ucKK4 Gingerbread 2.3.5 Firmware.
So afterwards u will need to use Odin to flash the .tar file version of the KK4 Corn Kernel in order to get cwm recovery and go from there in the flashin of dev roms if u want.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Little precision: Odin one click is what you'll be using to flash KK4 (stock gb firmware). Odin 1.85 is what you'll need to flash Corn kernel (.tar is PDA slot).
Sounds great. Should be able to get it done today
well i built a jig using the three resistors from radioshack and a micro usb cable i found laying around. doesnt appear to be working...
ok, so i needed an actual samsung cord......plugged it into my computer and it started charging
ok, got it! now searching for correct drivers. apparently i had the wrong ones
coltlacey1 said:
ok, got it! now searching for correct drivers. apparently i had the wrong ones
Click to expand...
Click to collapse
See this post....http://forum.xda-developers.com/showthread.php?p=33279682.
And that thread may prove helpful to ya. :thumbup:
Sent from my SGH-I777 using xda premium
downloading the stock kk4 now. ok, so what about the root it had? doesnt this dispose of root? or will it still be rooted? and is there anything in particular in odin i need the check mark before flashing the two files?
well ok so the file should tell me what i need to do. says it has instructions
do i have to root to install?
coltlacey1 said:
do i have to root to install?
Click to expand...
Click to collapse
Nope...The KK4 one click has instructions included. :thumbup:
After the successful flash of the KK4 one click, just use this...it will get u Root and KK4 Corn Kernel v7.0A so that u can have CWM Recovery....[Utility]KK4 Easy Root
Sent from my SGH-I777 using xda premium