Hi guys.
I would like to flash, but currently it is too risky for me because i got a netlock. So i have to unlock my Samsung galaxy s.
First i tried to use the SGSUnlockTool but it said if i actually had a galaxy s.
Afterwards i used other methods like your windows unlock tool, but that didn't work too - it said that it doen't find the "nv_data.bin" file.
I read through several forums and i read that the nv_data.bin could be "damaged" because of flashing. The only problem is, i never flashed (at least i never flashed manually) I just flashed with Kies from Eclair -> Froyo and one time i used the kies reg hack to get Froyo on my galaxy s.
So what could I do?
Shall i even unlock my phone before flashing manually?
(SP and all other locks but the networklock are off!)
(btw. sorry for double post)
Thx in advance
Joker
can you please tell me what is netlock
Hello everyone.
I've just purchased I9001 and the version is gingerbread 2.3.3. I have a lot of application installed. When i upgrade my KIES version to 2.1.1.11124_17, a new firmware was mentioned by KIES. This is the details:-
My current version is PDA:KG2 / PHONE:KG1 / CSC:KG2 (XME)
New version is PDA:KJ2 / PHONE:KJ1 / CSC:KJ1 (XME)
If i upgrade the firmware, will i lost all my application installed?
If yes, is there any other method to back up my apps?
Attach is the picture of KIES
Don't use Kies unless you want to brick your phone.. the software sucks so hard that will almost brick your phone 100% sure. Use Odin instead and flash XXKPS (2.3.6)
But first root your phone and save /data/apps to your local drive
I think this is allot information for you if you just bought the phone but you should read the forums
You can find everything you need here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
Go to 2.3.6 and download I9001XXKPS. You can use most of the tweaks for that.
Note: your warranty will be lost (at least formal). But its worth to do
you can find a good description how to flash a rom also here
i just installed XXKPU as described above and improved it following this post from point 3 of the step by step description on (steps 1 and 2 can be ignored due to previously mentioned description)...
my sgs+ works fine now... all apps with complete app data and settings plus market links were restored with titanium backup pro within 30 min...
make sure not to use kies ! it bricked my phone ! use odin !
Does KIES brick the SGS Plus only?
Before i started flashing roms i updated twice with kies and nothing happened ?
Kodon said:
Does KIES brick the SGS Plus only?
Before i started flashing roms i updated twice with kies and nothing happened ?
Click to expand...
Click to collapse
updating with kies is a real adventure, i tried it only once, and i was lucky it gave me an error at 0% , so i just got the battery out and all worked fine after a reboot, my friend was not that lucky, it froze on 55% and he could do nothing about it, so he had to flash a stock rom with odin to get his phone working again. i don't think it can hard brick ur phone (well the chances are little, but still possible) , mostly u can get into download mode and fix the issue, for those who don't know how, they just have to take their phone to service and claim their warranty.
But i like to know too...Is it a SGS plus thing? I have a SGS and updated 2 times my SGS, 2 times my girlfriends SGS and 1 time the SGS II of my sister. All with kies. Nothing happend.
Sooo... am i this lucky or IS it really a SGS plus thing?
Cheers
New...
If you are not interested in exploring new ways to do things, Kies is the safest way
Hi guys, I know I need to make this short but I want it to be clear anyway. This is crazy I wanted nothing to do with smartphones 3-4 days ago because all the carriers rip us off with huge bills to get them. But low and behold when my cheap flip phone died after 3 years of loyal daily work a friend of mine offered me his Galaxy S i9000m for a good price. Started playing with the device and having a strong software/computer background started having a lot of fun with all the applications and was amazed with the possibilities (Networking, ipcam whatever) that just kept multiplying until I fell upon applications that needed something called gingerbread... Anyways I can tell you I learned a ****load in 48hours...
So I installed Samsung Kies, it found me the update and put it on for me.. (2.3.3 Gingerbread) then the nightmare started. The phone would boot, and would randomly reboot a random number of times until it could finally stay on and this could last from 2-30 minutes. So I thought, I'll just do a factory reset, to realise that its "STUCK" in 2.3.3 once its updated no going back to 2.1 or 2.2 easily.
Started looking around for ways to downgrade, and EVERY SINGLE LINK redirects to these 'mass download' sites that end up saying the firmwares were taken down for copyright issues. So desperate to find something, I fell upon a multiple CSC FROYO 2.2 firmware for the i9000 and was able to flash that in download mode the phone worked fine, except for me being very curious about the fact that I lost the "M" in my model description...
So started reading this thread(Mostly because I had already realised that with this non i9000m rom I had lost the 3 button DOWNLOAD MODE which i Had before) **** : http://androidforums.com/galaxy-s-a...flashing-darky-v9-gt-i9000m-minimal-risk.html
Got it rooted, got clockwork on, never managed to get the voodoo kernel working had errors in CWM.. so I was ready to give up until my eyes caught the
"*#*#2663#*#*
Then click Touch key FW update"
Which I thought would be neat to try.
NIGHTMARE, now BACK and MENU are dead, I understand that this is because I am running a non i9000m ROM and that updating the firmware rendered them unusable.
I came accross a post : http://forum.xda-developers.com/showthread.php?t=869492
Where this problem is adressed, I pretty much understand everything that should be done to get this back on its feet (right now the phone is still working I can use it at least 75% of its functions work except no back and menu)
Where I need your help : I'm not too sure how to attack this the right way, since I can't get into download mode I understand flashing is now more complicated to accomplish and now that I know that I need a i9000m firmware how can I find that...
Sorry for the long post I know I'm a noob here but I wanted to prove I had done all my homework to get where I'm at now seeking help from you guys!
Thanks a lot
Mat
By the way : Galaxy S GT i9000m currently on a 2.2 i9000 rom, my carrier is BELL. (Canada)
So there's no way of updating to 2.3.3 using Kies?
The only thing I can think of is getting a USB jig from ebay, which makes the i9000 go to download mode instantly. Good luck!
Alright, so I used CHECK FUS, and was able to get the i9000m stock BELL firmware YAY
now the help I need is to flash it correctly and find a way to get past the no download mode problem, would be very appreciated,
thanks guys
No, similar minds Sepharite, I also thought of redoing the Kies method, and then going back again if I needed to but now Samsung Kies says "Your device does not support firmware updates through Kies" Wow.. useful app, a samsung native app can't even detect it's own fricking hardware.
Thanks
UPdate : Was able to restore the 3 button "DOWNLOAD MODE" with a little tutorial online. Now I tried flashing my i9000m with ODIN, it flashed all the way and I get a i9000M logo now but it gets to the splash S logo and keeps rebooting never gets into the actual android setup is there something I did wrong?
In Odin all I put was the "BELL i19000m stock ROM" under PDA and wrote it. The device rebooted after flash but there still seems to be something I haven't done right.
Thanks guys
Please help guys, I know some of you out there have got this stuff nailed down!
Did you flash with a 1 file ROM or a 3 file ROM?
Using the UGKG3 ROM that you can fine here:
http://forum.xda-developers.com/showthread.php?t=1102881
Place the 3 files in their respective places (PDA, PHONE, CSC), for the PIT file, select the 512 pit file that should have come with ODIN, connect the phone, wait for ID:COM to turn yellow, and press Start.
That should get you going again. You may get apps that force close, so you'll need to delete the apps data and then reinstall them.
Hey thanks a lot man ya my flash was a SINGLE FILE, I bricked it yesterday trying to flash a different ROM since I had nothing to lose, I just got it working again on the old 9000 ****ty version that my back and menu keys don't work...
Now for some reason the USB JIG doesn'T work anymore after a couple of uses... could something have been damaged by doing it many times?
And your original roms section they are all unavailable due to copyright did you check the links before sending them?
When you say get the stock roms, I was able to get the UGKG3 file, but what about the versions? When I look at the north american section of the 2.2 version
UGKC1/UGKC1/BMCKC1/Sbl
UGJL2/UGJL2/BMCJL2/Sbl
UGJK3/UGJK3/BMCJK3
which one of the three suits me?
Thanks for your help, and if I get this running and go back and update my touch key firmwares with the right "Vibrant / 9000M" roms I should get them working again?
PS : I'm also very preoccupied by the fact that the USB JIG fix doesn'T seem to pop download mode anymore because this version of the ROM that I have has Download mode not working with the 3 button method. :S I wonder whats going on, but basically if I get your ROMS working the first time It'll fix everything but if it crashes then I lose the galaxy haha
Not sure why the USB jig doesn't work anymore. I have a couple and have only tested them on my phone to make sure they work, but they did not work on a Galaxy S II that I tried it on.
I just checked and the download link for the UGKG3 ROM at multiupload (downloading from multiupload), still works (you need to enter the captcha phrase).
The site megaupload was shut down by the US gov't, so that one won't work.
EDIT: UGKC1/UGKC1/BMCKC1/Sbl is the latest Froyo release from Bell. That's what mine and my wife's gt-i9000m phones came with.
She's still running it on hers.
Ok sorry for all these posts, basically when you said UGKG3 you want me to get the 2.3.3 ROM on ? Is that right? What if I Want to put on 2.2 to be sure I have no trouble with it since I'm in all this mess because the Kies update to Gingerbread had my phone in a bad state.
Thanks a lot by the way!
Sorry your post refreshed right after I did mine. Alright cool so I'll try the one you say your wife is running, I had made myself a JIG with a stock Samsung wire, it was working fine with a 300K resistor and I decided to solder it on and then it stopped working after that.... maybe the actual "usb plug" is damaged from the soldering heat I guess I'd have to try another wire, but anyway I'll try to download the 2.2 I just got the UGKG3 3 FILE rom downloaded one of the links did work!
But I'm a little worried about 2.3.3
I'll try to see if i can download the 2.2 first.
I mean basically... these roms shouldn't jam during transfer i Guess
One other thing I see different confusing information, is it important for me to click 'update bootloader" with these stock roms since these files contain an 'SBL' ? Because both times I bricked it was with an "update bootloader checked" firmware update trying to put the ARIES 3 button method fix as a boot.bin and sbl.bin
Fanks..
Files with SBL in the name already have the bootloader included in the PDA file, so "update bootloader" should NOT be checked.
That reassures me, because the only times it did jammed was when the bootloader was checked! THanks a lot blackrose i'll go out and buy another usb cable because I destroyed mine making my JIG. And I'll try yours out. I was reading a lot on another thread and found this one guy who flashed the JL2 one to save his keys instead of the C1 you said your wife was running, whats the main difference between those two and which one should I start with?
Update : I got a new wire, flashed the KC1 version of the firmware, everything goes fine, I did a repartition with the 512 PIT, it reboots the phone, loads all files in a prompt in yellow and there are no errors that appear, the phone reboots after writing 'successful update' and then goes to the galaxy logo and jams there and does the ONE vibrate, PAUSE, 2 vibrate on a black screen forever. The advantage of having successfully flashed a 9000M ROM allows me to have access to my DOWNLOAD MODE 3 button method, but ever since I flashed that 2.2 i9000 XXJP2 (seems its a euro version) off a torrent I found on the web (When I was desperate to find a functioning 2.2 working version) it seems as though it doesn'T want to boot with any other rom than that one, because all the 9000M roms that I've tried so far flash correctly, and the logo actually changed from i9000 to i9000M on the startup, but they just don't boot.. what could be missing it doesn't seem to be much???
Thanks Mat
If any of this can help, the device was rooted, I was following the darky's mod i9000M guide so I had previously installed the CLOCKWORK MOD and that's as far as I got because my eyes caught the FIRMWARE TOUCH KEY UPDATE which ruined my keys.
Could any of this have screwed something that stops my other roms from booting?
Thanks guys I really want to get this phone up and working again as I don't have much money and am afraid I'll have to cancel with my phone company if I just can'T get this running. I am also willing to make a significant donation to whoever can help me.
You in Canada right? Where abouts?
Sent from my GT-I9000 using xda premium
Quebec province
Alright, if this can help anybody my whole problme is solved.
I flashed the ****JL2**** the KC1 did not boot, the JL2 did.
Once inside JL2, I was able to update my TOUCH KEY FIRMWARE *#*#2663#*#* and everything went back to normal
I have no idea why the KC1 does not work, bugs me out.
I have the Galaxy SIII 4G
running Android 4.1.2
Locked on Telstra
Any other information needed? ask me.
So, I got my phone from a friend, and was very exited and tried rooting.
Firstly using Odin and a guide which I can't link since I'm new to the forums and can't post links, I didn't get some steps right and phone wasn't rooted, I then did a factory reset.
Went to find another guide and then found the Galaxy SIII Toolkit (Am new to forums, can't post links) and used it, I found that the version 7.0.0 didn't include support for my android version on the 4G so I tried the normal international version that wasn't for 4G, it was very similar but this may have been what had broken it. (me choosing the wrong one, stupidly) and after trying and trying, using some other things like Odin, my phone is now stuck on the "Downloading...Do not turn of the target !!" and even if I pop the battery, reset the device, try to get to recovery, and trying many other things, It just doesn't budge. When I was able to get to recovery and able to make it to Samsung galaxy SIII logo but no further,(I managed to flash CWM recovery) I tried factory resetting but it still didn't work.
As you can tell, coming from a Galaxy Nexus to a Samsung Galaxy SIII is pretty exiting, then having the phone broken within the first day of having it is very saddening (Seriously almost cried).
I need urgent help, if you need any more information on the phone, feel free to ask, even though I may not know.
Thanks :fingers-crossed:
there's a reason there are 2 different versions for the i9300 and i9305. They're 2 different phones.
http://forum.xda-developers.com/showthread.php?t=1946915
and this is a wrong section, it's for the i9300 (it says so right in the title)
Good Morning Guys
After a lot of struggle I decided to post me and my friends problem here, I know on XDA Developers there are a lot of clever guys who might help us to solve this problem. Please note that I have a Galaxy S3 which is rooted and loaded with Custom ROM WanamLite Rom, so I am familiar with the process on how to do this and we have tried all options to fix the OS on this Galaxy S4 i9505 of my friend. Here are the details:
We are from South Africa and when overseas my friend bought a Galaxy S4 i9505 in Bangkok, he had the option between the clone and an Original, so he bought the ORIGINAL rather than the clone. Now once he got back to SA he started using the phone which wasn't network locked but we noticed that the OS version was a bit funny and that the phone was already rooted out of the BOX (Strange) so we thought he bought a clone and followed all the links on the the net showing how to determine weather its a clone or not. So we came to the solution that his phone is NOT a clone but it has a weird OS on it that we cant change/load another OS on. Here is what we tried:
1) We wanted to load a new OS or Custom ROM since the phone was already rooted, so we first tried to download the stock firmware from SAMMOBILE for South Africa and copied it to the Ext SDcard and rebooted the phone in Recovery mode. There we didn't have any option to install OS/ZIP from Ext SDcard ..... Not even under advanced. There is NO Mounts & Storage nothing, it just doesn't display any External Storage options. So this made us go to step 2
2) We thought okay lets try at least and load another custom ROM since its already rooted and see if we can fix the problem the other way around. So we installed Odin on PC and connected phone in download mode to install CWM recovery, ODIN pics up the device as "Unknown" and the port in ODIN doesn't become green. We have installed/uninstalled various S4 USB Drivers and when the phone is connected to Windows 7 PC is shows Unknown Device ...... You can access the phone Sdcard & ExtSDcard through Windows although its shows Unknown Device, but when rebooting in recovery mode it doesnt see the Ext SDcard - WTF?
This is where we gave up and decided to see if any of you guys can help or have any ideas to fix this and get a proper OS working on it ...... Cause I suspect that whatever OS is on the phone wont even receive OS updates and we want to be able to update the OS/Custom ROM for new OS versions like Android v5 thats on the way. Help would be appreciated guys
Take care