[Q] How to root JB XXLSA? - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi, I have just upgrade my GT-N7000 from rooted ICS to the latest leaked JB XXLSA. I have been looking for the forum but I have no find the answer. How can I root the Rom XXLSA? I suppose that with PC odin, but I'm not sure what kernel should I flash
Thank you

Flash philz 3.71 krenel for xxlsa
Sent from my GT-N7000 using xda app-developers app

VinayakG30 said:
Flash philz 3.71 krenel for xxlsa
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i install ''PhilZ-cwm6-XXLSA-XJB-3.71.tar'' but no acsess root permission why? Cuz i can acsess cwm and when opening phone i see yellow triangle but ma phone say no acsess root permission. What your suggest?

install a super-su but nothing is change and i can't open super su. it's wanna root permission What can i do?

Install the zip version of the kernel using recovery not the tar version. You have flashed the tar version from PC Odin thats why you have a yellow triangle

Worked fine for me
I've been hunting for this information for ages having managed to brick my Note trying to install PA - thanks for the info - simple and to the point!
..and yep it worked!
nokiamodeln91 said:
Install the zip version of the kernel using recovery not the tar version. You have flashed the tar version from PC Odin thats why you have a yellow triangle
Click to expand...
Click to collapse

Hi, I am running XXLSA also and would like to Root it. Do you know a link with the step-by-step guide to rooting and upgrading XXLSA to the latest ROM version? Thanks!

rykel98 said:
Hi, I am running XXLSA also and would like to Root it. Do you know a link with the step-by-step guide to rooting and upgrading XXLSA to the latest ROM version? Thanks!
Click to expand...
Click to collapse
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)

ThaiDai said:
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)
Click to expand...
Click to collapse
Thanks ThaiDai! Where may I find Odin, Phil's Kernel and the Custom ROM? Any links?

rykel98 said:
Thanks ThaiDai! Where may I find Odin, Phil's Kernel and the Custom ROM? Any links?
Click to expand...
Click to collapse
In XDA developers forum you'll find everything because it has a clear structure of subforums and a fantastic search engine.
One more hint: you are already in one of the subforums you'll need - you'll only have to go one step up and use the two round things near your nose.

ThaiDai said:
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)
Click to expand...
Click to collapse
Can I upgrade from XXLSA to XXLT4 with this method? I.E. can I install PhilZ XXLT4 kernel and then any XXLT4 rom with this method?

SpaffyXE said:
Can I upgrade from XXLSA to XXLT4 with this method? I.E. can I install PhilZ XXLT4 kernel and then any XXLT4 rom with this method?
Click to expand...
Click to collapse
Yes. Download philz kernel (zip file) go to recovery flash the zip file. Go back to recovery do the wipes. Download XXLT4 or XXLT5 and put the phone into download mode and flash XXLT4 or 5 using Odin. Once successfull, flash philz kernel again from recovery, you will have root and custom recovery.

Related

[Q] tutorial i9000 stock -> custom rom

my friend wants to change the rom on his stock i9000
is there a tutorial or app that can root, install CWM, etc so that i can just boot into CWM and flash a new rom?
thanks
EDIT:
from a quick read, do i do this?:
. Rooting your phone and flashing a custom Kernel.
3.1. Download your preferred kernel (the version for Odin, not the one for CWM).
3.2. Open up Odin or Heimdall.
3.3. Put you phone into "Download mode" and connect it to your computer (DO NOT CONNECT THE PHONE BEFORE OPENING ODIN OR THIS WILL NOT WORK).
3.4.1. If you are using Heimdall, unpack your kernel until you end up with a file called zImage. Select that in Heimdall in the box for "Kernel (zImage)" and click Start.
3.4.2. If you are using Odin, select the file you downloaded in the PDA box and click Start.
3.5. After your Phone reboots, go into "Recovery mode" and go to "Advanced Speedmod ULK features" -> "ROOT / Install Superuser".
3.6. After rebooting the phone again, you should have root permissions.
Click to expand...
Click to collapse
and then install rom manager - > flash CWM -> boot into CWM -> flash custom rom?
There's a wealth of information hidden in the stickies which you scrolled past to post your thread.
Sent from my GT-I9000 using xda premium
woolf clubs said:
There's a wealth of information hidden in the stickies which you scrolled past to post your thread.
Click to expand...
Click to collapse
dont worry, i am well learned from stickies, but this is urgent and considering this isnt even my phone, i dont want to have to study for 500 hours before flashing like i did with my own one
can you just suggest one please?
If it's stock, flash ramads jvt with odin. You'll then have a rooted rom with cwm recovery.
Sent from my GT-I9000 using xda premium
woolf clubs said:
If it's stock, flash ramads jvt with odin. You'll then have a rooted rom with cwm recovery
Click to expand...
Click to collapse
and then just
panyan said:
boot into CWM -> flash custom rom?
Click to expand...
Click to collapse
yeah?
Yep.
Or you could flash milky's rom, he's posted an odin flashable version. It's odexed jvr.
Sent from my GT-I9000 using xda premium
so let me get the process right:
1) download ramads jvt and odin
2) use odin to flash the new kernel which will give superuser and CWM
3) boot into CWM
4) flash the rom my friend wants
correct?
panyan said:
so let me get the process right:
1) download ramads jvt and odin
2) use odin to flash the new kernel which will give superuser and CWM
3) boot into CWM
4) flash the rom my friend wants
correct?
Click to expand...
Click to collapse
Yep. That's correct.
Is he on gingerbread, if so follow the above process - you may need to flash a rooted kernel (chainfires would probably be best) afterwards as pda in odin.
If not on gingerbread, it may be quicker to flash milky's rom, it's got odin and full instructions in the download, and gb bootloaders.
Sent from my GT-I9000 using xda premium
woolf clubs said:
Is he on gingerbread, if so follow the above process - you may need to flash a rooted kernel (chainfires would probably be best) afterwards as pda in odin.
If not on gingerbread, it may be quicker to flash milky's rom, it's got odin and full instructions in the download, and gb bootloaders.
Click to expand...
Click to collapse
your going to have to explain this to me, im really confused now
It's best to flash to the latest stock rom before installing a custom rom. Ramads jvt is deodexed but does not have root - so if you flash jvt, you will need to flash CFroot kernel after for root and cwm.
Ramads jvt does not have gingerbread bootloaders, so if it is on froyo or eclair, gb bootloaders will be needed.
If all this seems a pain, milky's rom is odin flashable, has bootloaders, root, cwm and also has odin and full instructions in the download.
Hope this is more clear.
Sent from my GT-I9000 using xda premium
panyan said:
my friend wants to change the rom on his stock i9000
is there a tutorial or app that can root, install CWM, etc so that i can just boot into CWM and flash a new rom?
thanks
EDIT:
from a quick read, do i do this?:
and then install rom manager - > flash CWM -> boot into CWM -> flash custom rom?
Click to expand...
Click to collapse
For flashing video guide you can visit
http://www.hdtechvideo.com
I can't install root from zip file from sd card , bacause is displayed 'e:signature vefification failed' . Next time I flash by ODIN file CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS, but after flash phone stops on boot animation. Any ideas how to root phone?

[Q] use mobileodin downgrade to gb

Hi,
New to root and mobileodin i now on ics stock with speedmod k3-3 kernel have a few question hope can be clarified.
1) can i flash the kernel to cf 5.6 than download stock gb and use mobileodin with everoot to downgrade and get root access?
2)can i do a nanodriod backup before downgrade using cf5.6 kernel?
3)can i tick the full wipe option when downgrading?
Thanks
edwin2101 said:
Hi,
New to root and mobileodin i now on ics stock with speedmod k3-3 kernel have a few question hope can be clarified.
1) can i flash the kernel to cf 5.6 than download stock gb and use mobileodin with everoot to downgrade and get root access?
2)can i do a nanodriod backup before downgrade using cf5.6 kernel?
3)can i tick the full wipe option when downgrading?
Thanks
Click to expand...
Click to collapse
1)you can flash stock GB with root access using mobile odin and everroot option without CF5.6.
2)backup is always a good idea.
3)full wipe option is not a good idea, because we have superbrick bug thingy around. Btw stock GB itself is a wipe.
Hi,
I have quite the same question, but I need more details :
I have a GB kernel with CWM : CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5
I have a rom GB : Rooted_Stock_Odex_N7000XXLC1_FRANCE.rar
I am curently under paranoid v0.4, with original kernel installed by paranoid.
I have mobile odin.
I put all my files on my sdCard.
in which order I have to flash ?
ROm, then kernel ?
kernel then Rom ?
I think Mobile odin will proceed to a reboot after a flash.
thanks
Olivier
orobin said:
Hi,
I have quite the same question, but I need more details :
I have a GB kernel with CWM : CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5
I have a rom GB : Rooted_Stock_Odex_N7000XXLC1_FRANCE.rar
I am curently under paranoid v0.4, with original kernel installed by paranoid.
I have mobile odin.
I put all my files on my sdCard.
in which order I have to flash ?
ROm, then kernel ?
kernel then Rom ?
I think Mobile odin will proceed to a reboot after a flash.
thanks
Olivier
Click to expand...
Click to collapse
You can flash them at same time.
Sent from my GT-N7000 using xda premium

[Q] Restoring the phone after using CWM.zip and SU-Busybox-installer.zip

My apologies for the noob situation (new to Android tho a veteran iphone jailbreaker) but I did try my best reading lots of threads to seek the exact info I need:
Things I've done:
1) I got my N7000 with stock ICS 4.0.4 (Kernel: ZSLPM) yesterday
2) I followed some online resources in my local language forums and used both CWM.zip and SU-busybox-installer.zip to "root" the phone
3) I then started researching for ways to flash to JB rom but found out info regarding possible bricking hazard with stock ICS kernel and CWM.zip
appreciate if anyone could point me the safe way to :
either
1) Remove the CMW.zip and Su-Busybox-installer.zip to unroot the device and make it back to virgin state? so I can start everything over again and follow Dr. Ketan guides for rooting with safe kernel (I read we could flash the unstaller but that also need to put me back to Recovery, safe to do this under CWM.zip?)
OR
2) how could I flash my current setup (rooted already with CWM.zip) with a safe kernel ?
Thanks very much for any guidance.
Regards,
Anthony
Flash back your stock kernal and stock rom using odin
Thanks if i helped
Sent from my GT-N7000 using xda premium
Suresh_k said:
Flash back your stock kernal and stock rom using odin
Thanks if i helped
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
So you mean after I root my N7000 with CWM.zip and SU-busybox-installer.zip I have actually already flashed my kernel and rom in the phone already? I thought I have only rooted it but the kernel and rom are still untouched? please advise and thanks for responding.
macanno said:
So you mean after I root my N7000 with CWM.zip and SU-busybox-installer.zip I have actually already flashed my kernel and rom in the phone already? I thought I have only rooted it but the kernel and rom are still untouched? please advise and thanks for responding.
Click to expand...
Click to collapse
You can go to Settongs>>About Phone & under "Kernel version" you will be able to see which kernel you are using (for ex: my Note shows HydraCore_v5.34 which is a custom kernel).
So, if you are still on Stock (i.e., un-safe kernel), use PC Odin & flash custom kernel (use Dr. Ketan's guide). Make sure *NOT* to wipe/factory reset when you are on stock kernel. In case if you want to unroot, then also you have Dr. Ketan's guide in the same post.
Start using thanks button rather than posting thanks.
Even if u r on stock rom and stock kernal to unroot flash them back using odin
Sent from my GT-N7000 using xda premium
macanno said:
either
1) Remove the CMW.zip and Su-Busybox-installer.zip to unroot the device and make it back to virgin state? so I can start everything over again and follow Dr. Ketan guides for rooting with safe kernel (I read we could flash the unstaller but that also need to put me back to Recovery, safe to do this under CWM.zip?)
OR
2) how could I flash my current setup (rooted already with CWM.zip) with a safe kernel ?
Click to expand...
Click to collapse
CWM.zip is a tenp recovery.. it doesnot stay in the system after reboot. thou su-busybox stays... but if the phone has booted up that means u have root access now...
just install the philz kernel from here for ur rom. this is a safe kernel and u will be able to do wipes. this kernel can be flashed from stock recovery.
http://forum.xda-developers.com/showthread.php?t=1901191
nokiamodeln91 said:
CWM.zip is a tenp recovery.. it doesnot stay in the system after reboot. thou su-busybox stays... but if the phone has booted up that means u have root access now...
just install the philz kernel from here for ur rom. this is a safe kernel and u will be able to do wipes. this kernel can be flashed from stock recovery.
http://forum.xda-developers.com/showthread.php?t=1901191
Click to expand...
Click to collapse
Thanks for the advice.
Things are all good now after I got stuck with my first attempt flashing to Abyss which I later found out it doesn't support ICS then I flashed it to Hydracore then after that flash it to RocketROm and I'm now one happy user
Sent from my GT-N7000 using xda app-developers app
Next time do not use CWM zip to root your phone. Use Dr Ketan's method of rooting, because its dangerous.
Sent from my GT-N7000 using xda premium

cwm / philz = root ?

do i understand that right, that i can root my stock gingerbread by flashing this cwm/philz kernel, without the need to wipe any data?
i just want to flash ultimate rom. it says i need cwm. i don't fully understand why cwm comes together with a kernel and why that kernel gives root on any rom. how to root topic doesn't mention the flashing of just a kernel to get root. i guess i got something wrong here?
baseband XXLA4 - GB 2.3.6
You cannot flash PhilZ kernel on a GB Rom. It wouldn't boot up if you did.
anloid said:
#sry wrong forum.. move please?#
do i understand that right, that i can root my stock gingerbread by flashing this cwm/philz kernel, without the need to wipe any data?
i just want to flash ultimate rom. it says i need cwm. i don't fully understand why cwm comes together with a kernel and why that kernel gives root on any rom. how to root topic doesn't mention the flashing of just a kernel to get root. i guess i got something wrong here?
baseband XXLA4 - GB 2.3.6
Click to expand...
Click to collapse
for the Note the kernel and recovery are integrated, each kernel has a corresponding cwm recovery and root features too
so when you want to root a rom you have to flash a suitable kernel which will give it a cwm recovery to flash custom roms from and it will also give root features too.
Phillz kernels root stock ICS Touchwizz roms when flashed from stock recovery. after a complete reboot you can safely wipe from recovery and flash custom roms.
BTW - this thread belongs to the QA forum.
chasmodo said:
You cannot flash PhilZ kernel on a GB Rom. It wouldn't boot up if you did.
Click to expand...
Click to collapse
but would let me use cwm to backup and flash another rom?
You can't flash ANYTHING from stock 3e GB recovery. It won't pass signature verification.
(Unlike ICS). You need to root it first, then use an app such as mobile odin to flash a kernel which has CWM recovery.
Sent from my GT-N7000 using xda app-developers app
Edit: to root GB without going through Dr. Ketans long winded process, just download Chainfires exynos app from here http://forum.xda-developers.com/showthread.php?p=35512626 click on it, and select root device
Sent from my GT-N7000 using xda app-developers app
unfort my kernel is not bugged. can i flash a bugged kernel?
i think i understood that i need to use odin to flash on a GB device? if so, i hope i can directly flash ultimate custom rom using odin?
1. Root Gb
2. Install Mobile Odin
3.Flash Cf-Root or Abyss (both are GB with CWM recovery)
4.Boot into recovery, do wipes and flash new ROM.
NOTE: custom roms can't be flashed with Odin.
Sent from my GT-N7000 using xda app-developers app
non rootable room ^^
Use the exnos abuse app to root.
Hey can i flash philz on 2.3.6 (rooted) format and install a JB rom?
Yes

[Q] Flash CWM

Hi!
Can I just download cwm from here https://www.clockworkmod.com/rommanager and flash it via stock recovery like I had done with all my other phones? (Stock android 4.1.2)
I read many forums about that I have to flash Philz kernel first and use odin but is it necessary anymore? I also tried to look different kernel+cwm versions from Philz but newest download doesnt have any different kernel version (or I just dont find them).
You will need to use philz to root. On this phone recovery is in kernel.
nokiamodeln91 said:
You will need to use philz to root. On this phone recovery is in kernel.
Click to expand...
Click to collapse
So I just download zip file from here and flash it using stock recovery? It its possible do without odin? Or why there is .zip and .tar.md5 and .zip.md5 from same version of recovery file?
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000
No not that link.. There will be one for tw only.. Flash using recovery.. Tar version of the kernel can be flashed using Odin.. But flashing using Odin will increase the binary count..
nokiamodeln91 said:
No not that link.. There will be one for tw only.. Flash using recovery.. Tar version of the kernel can be flashed using Odin.. But flashing using Odin will increase the binary count..
Click to expand...
Click to collapse
You mean this -> http://d-h.st/users/philz_touch/?fld_id=25295#files
There is only XXLTA-ATL does it matter? Older cwm versions seems to have different version too.
After that I can flash roms and anything like with other phones?
Thanks for help!
That's that's one of the latest.. Match the rom version you have any other the kernel name and flash that.. Then you will be able to flash any rom but kitkat.
nokiamodeln91 said:
That's that's one of the latest.. Match the rom version you have any other the kernel name and flash that.. Then you will be able to flash any rom but kitkat.
Click to expand...
Click to collapse
But I want cyanogenmod 11. How can I flash it?
Flashing first cyanogenmod 10.x and then 11?

Categories

Resources