Database Develop

[Q] Seidio Rugged or otterbox?...

I am having a hard time deciding between the seidio Rugged or one of the otterbox cases. I am a contractor and need a protective case badly. I have had the incredible since launch. used the case/belt clip combo from verizon store...the one that doesn't cover the ends...dumb case imo. and ended up taking that off recently to just slide phone in pocket, as that case didn't protect the phone very much at all. but the best one available at the store at launch.
I ended up having to get a replacement phone, and recieved it today. I want to be able to protect this one better.
Physical damage and dust are both a problem durring work hours.
I wish I could find these new cases at a local store to compare in person.
Has anyone seen both of these types of cases?
which do you like better, and why?
I am leaning toward the seido because of the two different cases that come with it. I like to slide the phone in my pocket on weekends.
thanks,
Jon

jon1029 said:
I am having a hard time deciding between the seidio Rugged or one of the otterbox cases. I am a contractor and need a protective case badly. I have had the incredible since launch. used the case/belt clip combo from verizon store...the one that doesn't cover the ends...dumb case imo. and ended up taking that off recently to just slide phone in pocket, as that case didn't protect the phone very much at all. but the best one available at the store at launch.
I ended up having to get a replacement phone, and recieved it today. I want to be able to protect this one better.
Physical damage and dust are both a problem durring work hours.
I wish I could find these new cases at a local store to compare in person.
Has anyone seen both of these types of cases?
which do you like better, and why?
I am leaning toward the seido because of the two different cases that come with it. I like to slide the phone in my pocket on weekends.
thanks,
Jon
Click to expand...
Click to collapse
Oh wow, your story is a direct parallel to mine! I am a mechanical contractor (HVAC/R) who also has the incredible since launch, I myself have been using the the belt clip and shell that resembles diamond plate sold by verizon, an ok case but just doesnt cut it in the trades.
A month ago I bought the Otterbox defender, while it covers the phone well and adds much better protection, the fit of the phone inside is poor, I broke the belt clip two weeks into owning it. Otterbox did replace the belt clip but the time it took was almost two weeks. Just a few days ago the little detent on the otterbox that holds the phone in the holster broke so now I'm back to square one.
Just yesterday I decided to ordered Seidio Rugged case from amazon, I never owned nor held one but I figured it would be money better spent rather than buying another otterbox. I just don't think the otterbox quality is quite there. I expect to have the new case on or around 1-06-2011 and after I get it and put it to use I will update you on it so you can make a better decision.

thanks for the response...
I have read about different peoples experiences with these different cases, and still wish I could see them in person before purchasing. I am really close to going ahead with the Seidio Rugged, and might order it today.
Jon

I'm also a contractor installing satellites and am very happy with the Seidio Rugged.
What sold me on the Seidio Rugged was the "Face In" design and the 3 layers of protection. Sure, the 3 layers adds mega thickness but doing all the "cell destructive" stuff I do, it's a very minor thing to deal with. In fact, the few times I've taken the case off, the phone felt too small and fragile.
On the second Seidio Rugged case simply because in a stupid moment just grabbed the phone and ripped it off my belt instead of taking the clip off. No idea what was thinking but needed a new clip so just got the whole thing again.
But yeah, if you use a tool belt, climb ladders, crawl under houses, or any of the crazy dirty stuff contractors do, get a Rugged.

landscape installer/maintainer here. go with the seidio. im hard on all my stuff. and i have had the rugged for 6 mo. and havent destroyed it yet. locking mech. and belt clip still work fine. and the 3 layers on the actual case is very protective.
got mine on amazon for under 40 shipped.

seidio rugged here also.. best case Ive used...

I ordered the Seidio rugged today.
looking forward to it getting it here...

My Seidio Rugged outer skeleton snapped yesterday. I wasn't applying any pressure, just taking it off and snap. So I ordered a Case-Mate Tough Case. I'm sure it will work just fine.

cuban11182 said:
My Seidio Rugged outer skeleton snapped yesterday. I wasn't applying any pressure, just taking it off and snap. So I ordered a Case-Mate Tough Case. I'm sure it will work just fine.
Click to expand...
Click to collapse
This happened to mine as well. Seidio is good about replacing it....no real need to buy a new case. At any rate I recommend the rugged case. I have dropped my phone more times than I would care to admit and this case has saved it a few times over. I figured my exoskeleton was weakened from all the drops...and I had the tendency to take it off and put it back on for no reason when i got bored. Also it looks bad *** in my opinion...

Well as I explained in an earlier post I have been using the Otterbox Defender and while it offers more protection than other cases I have used it simply seem to lack quality and convenience. I did order the Seidio Rugged case to give it a shot and to my suprise when I came home from work today my rugged case was delivered. I wasn't expecting it until 1-06-2011.
I have to say after getting my phone in it and set up my initial feelings are it appears to be a well designed case that offers very nice protection to the phone and actually adds less bulk than the otterbox. I have not used it in the field yet but I will update after a day or two in the field. But I must say at this moment I am very pleased with my decision on the Rugged case and am kicking myself in the but for not making it my first my first choice.

received the Rugged case today....
the case was in the mailbox today.
I am impressed with the case. and will feel a lot better about the protection for my Incredible phone when on the job site. When all of the case components are on the phone, it definitely adds quite a bit of bulk. That will be something for me to get use to, for sure. But, I feel that it will not be a problem.
I can totally understand how some people have accidently torn the rubber access piece off that covers the micro usb port. I hope I don't tear it off, but realistically feel that it is just a matter of time, as it is a very small piece of rubber that keeps it attached...
I really like the fact that the innocase II is the base layer. I expect that it will be my weekend case.
I thought about not applying the screen protector, due to the problems i have had in the past applying screen protectors (ie...bubbles that won't go away, dust particles, etc.)...but, decided to try it. Well, it applied better than I ever could have hoped for. I started by aligning it at the top around the ear speaker, and just smoothed it out as I let it apply itself to the screen. It fits well for the most part, but could have been just a hair longer from top to bottom.
I am excited to have this case. I only wish I had not waited this long to make myself spend the money on it.
Hopefully i will be this happy with it in the coming days and weeks...
Jon

jon1029 said:
I can totally understand how some people have accidently torn the rubber access piece off that covers the micro usb port. I hope I don't tear it off, but realistically feel that it is just a matter of time, as it is a very small piece of rubber that keeps it attached...
Jon
Click to expand...
Click to collapse
I tore the rubber camera protector flap off my rugged maybe 2 months ago now, I contacted Seidio and they had a replacement outer rubber to me within a week. They are good about replacements.
(Note I was also only a week outside of the warranty period)

Seidio Rugged is a Wonderful Case
I have had the Seidio Rugged case for about two weeks now and it's wonderful! I don't find myself using the holster much, only when I go on a run do I attach it to an armband and slip the phone in the case so I can track my runs with Cardio Trainer.
I really like the feel of the case. It makes me feel like I'm holding a more powerful phone in my hands, whereas without the case, I feel like it's just too light to perform as well as it does. lol. However, size doesn't matter as some say, and is always a personal preference.
I would definitely say get the case if you want more protection and are willing to make the phone a few millimeters thicker. I definitely worry less about my phone breaking now. My only gripe is the camera cover tends not to stay pinned back in the little restraint Seidio made for it. Beyond that, wonderful case all around and I'd recommend getting it.

lightninjay said:
My only gripe is the camera cover tends not to stay pinned back in the little restraint Seidio made for it.
Click to expand...
Click to collapse
Bloody hell!!!!
Have had this case for months and have FOUGHT that damn flap every time!! Never even noticed that little hole.... Use the flash light app every day almost to see behind peoples TV's and audio equipment and have always had to hold the flap down....
Thank you VERY MUCH for your post. Feel like an idiot, but happy to know it now.

As a construction worker, I was about to buy an Otterbox before stumbling upon this thread. Did some research, looked at a few videos, and I think I'm gonna settle for the Seidio now. Either way, both look like great cases and I couldn't go wrong with either. The Seidio on the other hand converts to a normal case when not on the job site, so that's where it wins IMO. Also, the belt clip looks better designed. Thanks XDA! You guys rule!

Cannot say I have ANY complaints about the rugged. Think about it this way: when you need it protected, you have 3 layers + a holster. If you want simple, but cased, you got the Innocase II underneath which still can hold its own as a case not to mention that it looks nice and slim also. The thing that sold me though was the holster. It comes with a lock switch which means that this baby aint never falling off. I can remove, unlock, lock, attach the phone all with my index and thumb. So easy, yet so secure.
However, I did have one gripe about this phone, and that was the covers for the USB port and the Headphone jack. It has no notches to pull out easily and it tends to get lost in the groove that it fits in to. At first, I was extremely aggravated that this happened and was worried I would ruin the rubber. BUT I found that when I pinch the sides of the case (which I totally forgot was rubber), the flaps would pop out like nothing.
So yes, the one thing that would have held me back was solved, and I am happy to report that this thing is a beast. Of course if you don't want a big thing to lug around, then don't get this, but I gotta say... it feels like a tank, and I feel secure taking this thing everywhere with me now. =D

I've had the rugged for quite a while...just to have it really. Being a social worker doesn't really but my dinc at risk. I do enjoy the feel of having it in the case when I do though, although it seems that sometimes the holster seems to catch the rubber a bit more than I'd like. I'm glad to see it seems to be a step above the otterbox.

i'm been using the ottorbox commuter and i've had no problem, i love it cause its not as bulky as other cases.

Ya definitely going with the seidio rugged case setup. I can do without the belt clip attachment though. I can see that breaking off within a week at work with me. But the rest of the case(s) are just what I'm looking for.

Thanks for the thoughts, I am in the same boat as you guys.

Anybody have the Ballistic case?

If so just interested in some pics of it or just some review, there doesn't seem to be much online about them.
Would post a link but not allowed...... LOL
Sent from my Nexus S 4G using Tapatalk

Just got my case today from ballistic and it is great very heavy duty and lucky for me kid proof. Threw my phone down the basement steps and not a single scratch. I'll post pics and etc later on if possible.
Sent from my Nexus S 4G using Tapatalk

looks like a nice case but seems too bulky. i like slim and sleek

I also use the Ballistic case, I love it!
My job is kinda rough on my phone so I needed something tough.
I could understand why someone might want something a little slicker, but if your likely going to bash around your phone unintentionally, I'd recommend this case highly! I like the bulky military look however and it makes the phone comfortable to hold.
http://www.goballisticcase.com/products/samsung-nexus-s-ballistic-sg-series-case

Would you please post some pictures with your phone? Eventually while holding it in your hand? I want to make an impression of how it "feels". Thanks.

Never mind ... I've created my own pictures :
http://forum.xda-developers.com/showpost.php?p=19624828&postcount=91

Apart from shipping, is there any way to get these at Best Buy, Target etc?

I absolutely love my ballistic case and I actually tested it by throwing my phone about 20ft across a parking lot and absolutely zero issues. Very rugged case that will protect your phone from just about anything

Its the best $25 I have spent lol have dropped phone can't tell u how many times and nothing it adds a lil bulk (nothin crazy) to the phone but the protection is well worth it
Sent from my Nexus S 4G using XDA App

I have the case. I love how sturdy and solid it makes the phone feel. The bulkiness doesn't bother me. It's good a good grip and it feels nicer holding the phone with the case on it.
The only thing I don't like is that... since the edges sit up higher than the level of the screen (which is for protection, I know) it is kind of like a lint trap... I'm constantly blowing lint and crap off of my screen.

This Ballistic case fit also i9023 model?

Fits the phone and it's rock solid yet I don't think it looks that cool live since it's huge and those bumpers are lol. After mounting, the phone looks like a measurement instrument.
The rubber layer on the lower part of the phone is too close to the back and home buttons since you'll get an oval shape with the case on and the touching of those buttons aren't that comfy anymore.
Pro: -fits perfect (buttons, curves, no movement)
- high quality materials (similar to otterbox rubber/plastic if not same)
- makes the phone quite shock resistant, unless it falls on the screen
Con: - price
- it's huge
- the bumpers could be smaller
- there's no cover for the ports (ex.: otterbox commuter)
If somebody wants to use it for scratch protection i think the cheapest case will do. But if you do sports and/or work in above average conditions, then it's a good accessory.

Nice!!, but shouldn't that case come with pants with XXXL pockets?

[email protected] said:
Nice!!, but shouldn't that case come with pants with XXXL pockets?
Click to expand...
Click to collapse
Haha, seriously no joke!
I'd like to add only one 'con' for this case after using it for many months now.
The rubber corners seem to be fluff magnets when I put it in my pocket, can be quite annoying if you like a squeaky clean phone.
Saying that, because of this I have noticed that the case is EXCELLENT at not letting dust/crap touch the phone under the cover, very well sealed. Also, it's motivated me to keep my pockets fluff free, which is good!

Case Suggestions

Just got my phone back from getting the screen replaced and need to find something to put it in to keep it safe! Any Suggestions?

Original HTC Desire HD Leather Case
Hi there,
when I got my NS i went to the nearby Electronics Shop and tried the cases they had. The Original HTC Desire HD leather Case fits very well...

do you have the i9020 or i9023? Any type of case you have in mind?
Sent from my Nexus S using XDA App

I really like the cases from this thread. Picked up two of them.
http://forum.xda-developers.com/showthread.php?t=1222925
Sent from my Nexus S using xda premium

The Incipio Feather Case is nice. It doesnt add much bulk, but still protects well.

Why not get a good screen protector and then run without a case. When the battery door gets to the point that its no longer attractive or you want to sell the phone buy a new battery door cover. A new battery door will cost you $7-$12 on eBay.

My Nexus has survived wars and it still looks good w/o a case. Like ^ this guy said, screen protector would suffice. I hate that extra bulk in my pocket.

I've got the trident aegis black-on-black for my NS4G (which I've had since last august) and think it's great. I had never been a "case" guy, and always kept my phones bare, but this phone was just waaaaaay too slippery. The smooth plastic back is one of the worst features of this phone and makes it really hard to hold on to if you're constantly juggling stuff in your hands and on the move. I dropped it a bunch of times in the first few days I had it before I just caved and ordered this case.
It's a two-piece case with a silicone full body case that covers the whole phone, and then a hard plastic outer shell that kind of clamps around the silicone.
The silicone part is supposed to absorb shock when you drop it, I guess. It has tabs that cover the headphone and usb ports, cutouts that are perfect for the camera and speaker, and mic, and is a bit thicker on the corners, which gives me some confidence and makes me think that they thought the design through well. I've dropped it a bunch, and watched my 1.5yr old son throw it to the ground, and no probs.
The plastic part wraps around that and is supposed to be good at reducing risk of damage during "crushing" impact. All I can say is that I actually shut my car's trunk on this phone accidentally and it was absolutely fine. It gives it gives it a sleeker feel and minimizes the "ruberry-ness", too.
It also comes with a clear screen protector that is fine, and I don't even notice. Since the screen is curved most people complain about the fact that screen protectors don't stick well on the edges, which is true, but the lip of the silicone case on the front covers this area, so you don't even notice it. I also don't notice a difference when using the touchscreen.
The silicone part does collect lint, so if you're OCD about that, it'll be annoying, but the protection makes it totally worth it for me. I'll gladly pay $30 for a rock solid case that collects a little lint rather than get insurance at $7.99 x 24 months = $192 over the contract. The one thing that's important to know if you use multiple batteries like I do, is that you have to put the silicon section into the hard plastic section first, pop all the buttons out of their holes on the hard plastic case, and then push the phone into the case. If you try to put the rubber part on the phone first, and then put the hard plastic on, the fit is so tight, it's tough to get the buttons to pop out. It was pretty frustrating before I figured this out, but now it only takes me a few seconds to do a battery swap. Finally, the case does add some bulk to the phone, but I personally don't think it's all that bad. The phone feels more solid in my hand and is much less slippery.
I've been meaning to write a review for this phone in the proper thread, but I don't like to review stuff unless I've really used it. So I pretty much forgot till I saw this post. Maybe I'll go link to this post in that thread too, but if you want pics, I remember seeing them in that thread, and in threads over on androidcentral or androidforums or something. Good luck with the case search.

I grabbed the Ballistic case for my Nexus. It's pretty rugged, stays on very well, and comes off easily when you want it too. Feels very solid in your hands.

corgan1001 said:
I grabbed the Ballistic case for my Nexus. It's pretty rugged, stays on very well, and comes off easily when you want it too. Feels very solid in your hands.
Click to expand...
Click to collapse
Dou you have i9020 or i9023 version?

These are sick... Like the Mercury, but minus the blatant Engrish
http://www.myincipio.com/Google-Nex...Ultralight-Hard-Shell-Case-1065_1566-opt.aspx

Looking for a "grippy" protective case with non slip back

I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!

dengood1 said:
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
Click to expand...
Click to collapse
http://www.amazon.com/Duzign-Sentin...1378141878&sr=8-3&keywords=duzign+case+note+2
This case has been discussed by many on this forum and it has good reviews. It is definitely protective and grippy. You can even tell from the back rubbery design. If you want something slim, with a soft matte feel, i'd get the Six Abundant Case: http://www.amazon.com/DBA-Cases-Abu...=1378141992&sr=8-1&keywords=six+abundant+case

Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

dengood1 said:
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
You're very welcome

opasha said:
You're very welcome
Click to expand...
Click to collapse
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
From all the reviews and things I have heard about it, it seems to be in the middle. A hard rubber. So it's good for shock absorption. Definitely not a soft rubber because that would wear out very easily. However, from what everyone in the forums have said and from the amazon reviews, it seems like it will stay in place without issue. Also, it's only $10 and from amazon. If you don't like it, you can ship it back the same day for a full refund without any cost to you. Just keep the original box/packaging.
Here's a quote from someone who has it: "The back part of the case (the black exterior) feels more like silicone than plastic which gives it a nice look and grip. I have dropped my phone once on this case and I have to say that this case does a very good job on absorbing impact."

dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.

Brad.S. said:
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Click to expand...
Click to collapse
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.

opasha said:
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
Click to expand...
Click to collapse
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?

Brad.S. said:
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Click to expand...
Click to collapse
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.

opasha said:
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
Click to expand...
Click to collapse
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.

Brad.S. said:
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Click to expand...
Click to collapse
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.

opasha said:
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
Click to expand...
Click to collapse
I never printed any cases for my Note 2, just the inserts for the UAG case with lettering and glow in the dark filament etc. I did make four cases for my gf's S3 but in the end she moved to a pink folio wallet case (which would take too much time to make haha). I've since then had two dead SD cards.. So I've lost a lot of pictures (backups are my priority every 24hrs now..). The cases were more of a "wow factor" type of thing. Everywhere we went people asked more about her case than my huge phone lol.. Lead to a lot of explanations of what a 3D printer is.. But After a few times on/off of the case they'd get weak and start to crack at random layers of which the printer printed it (our printer has a resolution of 0.001mm).
Started sanding the area of the Sentinel case today that I hacked out with the razor to make it smoother. Only had about ten minutes with some 1600grit paper, so I got one side pretty smooth!
I wanted to pledge money to the kreyos smart watch but got worried that I'd be stuck with money in the air for it and no item on my wrist until next summer.. The galaxy gear is definitely going to be watched (pun intended)! As long as it stays within $200-300..
As you can tell, it's hard for me to commit to some purchases lol!
To op: I remember seeing some peel & stick grip strips for phones. They were just thin clear gel-type adhesive strips. Been looking for them but can't find the review. Honestly, I'd also like a grippy case..
Edit: found it! www.egrips.com/ check it out.

Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app

dengood1 said:
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Try the DBA Cases Ultra protection cases very good quality and good feel
http://www.dbacases.com/samsung.html

I have the UAG case. I have used the UAG line of cases for all my phones and they are solid. They have the bevel in the front so if it drops face down you wont shatter your screen and it has extra cushion on the corner bumpers. They are only $30 - $35 online. They fit on my OEM samsung dock with spare batttery charger.
The reason why I trust all my phones in the UAG case is that my wife's nephew through my note down the escalator at the mall. My heart stopped as I saw it tumble and bounce off every step. When I went to get it, the phone and case didnt have a scratch on it. The otterboxes are great but they are way too big. Especially for our note.

I am using a cheap eBay tpu. Smoke clear and it is rubber. It works great and protects just fine. Best of all it was only a buck and a half! Rubber does a pretty decent job of keeping it from sliding around unless it is on something very slick. keeps good in the hand too
Sent from my kraken (Note2) using xda app

I have the body glove from sprint.
I feel it offers the best for daily use and it has pocketablility which is nice. It doesn't get hung up as it has a glossy surface at the bottom of the phone.

Belt Holster for Note5 in a Otterbox defender?

Hello all
I'm looking for a soft material (leather, fake leather, canvas what ever) belt clip holster for a Note 5 that is in a Otterbox defender as well.
Hopefully the holster would host most of the device but still be easy to slip out and also would have a magnetic closing clip.
Basically I need to the Otterbox due to my environment, and tried it yesterday for the first time and it was great, but the clip on holster for it that comes with that I can see is not going to work.
For the one smartphone I had before it was considerably smaller but I had a holster for that, and in using both, I know that is what I need.
So does anyone have any ideas?
Thanks greatly for any help.

WBFAir said:
Hello all
I'm looking for a soft material (leather, fake leather, canvas what ever) belt clip holster for a Note 5 that is in a Otterbox defender as well.
Hopefully the holster would host most of the device but still be easy to slip out and also would have a magnetic closing clip.
Basically I need to the Otterbox due to my environment, and tried it yesterday for the first time and it was great, but the clip on holster for it that comes with that I can see is not going to work.
For the one smartphone I had before it was considerably smaller but I had a holster for that, and in using both, I know that is what I need.
So does anyone have any ideas?
Thanks greatly for any help.
Click to expand...
Click to collapse
I use one of these, I picked up when getting an oil filter for my car, holds my note 5 in an otterbox symmetry, as well as a nexus 6 in a slim case, at the same time. should be plenty for the note in a defender
http://www.oreillyauto.com/site/c/d...yword=phone&pt=N1687&ppt=C0107#itemDetailTab_

https://www.amazon.com/gp/product/B00CNWNTHO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Use this with my Note 5 and spigen case. Used this when I had a note 4 and commuter case as well.

Hey guys.
Been a while since I made this post so I kinda forgot about it, but thought I would post what I did end up getting.
Got this off ebay: http://www.ebay.com/itm/371557478974?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Given its price as you can expect its not top shelf quality in materials and construction.
Basically for this unit I actually found one of some other brand that had a dif imprint on the front, but it was completely the same in every other way. So I guess point is, there is probably some cheap maker who sells to a few resellers.
Again the quality is not great and for both they had some bad assembly quality and in actually in completely dif areas. So guess my point is, is kinda a crap shoot as to what issues is might have.
But if its just a little off at first, funny things with these is they do tend to stretch and eventually mold to your phone. But will say the one I am using now even had the center part for the clip a bit off the 0-180 mark, so its already getting worn out an loose.
But probably the biggest thing I would say is that while the phone and with the otter box cover fit into the sleeve part nice, the front cover really did not close right at first.
Basic problem is that as it uses a magnet, the phone with the otter box was a little to tall an so the cover could not wrap around the top enough to meet its counterpart contact inline.
So basically the cover would just sit flapped open a bit.
For this though it actually was not that far away, so what I did was spend sometime with a heat gun and the phone in the case and just heated the outside and pulled on it till I stretched it enough that it made good contact.
Thankfully I was able to do this without doing and physical damage to the material either.
In the end the case is pretty good for me, was nice and cheap which if you're in a harsh environment like me is good as any is going to get destroyed, so at least I am not doing that to a more costly case.
Fit is good enough and while in need of a little work when I got it, after now is fine.
Down sides is I am sure given the quality it will only last a year or two, but hey who keeps any device longer then that. Also its a gamble to what ever defects it might have when it comes and perhaps if bad enough, may not be usable at all.
Hope that is help to others.